Installation diagram HR in Oracle Database 12 c

Similar Questions

• Command-line installation or upgrade of oracle database

  Hi all
  
  Just a question,
  OPERATING SYSTEM; OUL5x64 without x window
  
  Is it possible to install or upgrade the database using command line
  NO X-WINDOWS?
  or if you know any docs on this issue, please provide a link.
  Thanks in advance.

  It is not possible.
  Even a silent installation requires X-Windows.
  It is also not a problem as X-Windows has always been required.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• Installation and Configuration of Oracle Database 11g (11.2.0.1.0)

  Hello
  They can support me in the resolution of these issues, regarding the Oracle 11 g database:
  1. how to install the JVM Oracle component
  2. how to enable XA Transactions
  3. how to activate the Oracle JVM
  
  Thank you

  PL after the release of the following two statements-

  SQL> select * from DBA_REGISTRY;
  SQL> select * from V$OPTION;
  

  HTH
  Srini

• Linux and oracle database installation best practices windows

  can anyone recommend the guide of best practices for the installation/design of windows/Linux oracle database servers.

  Microsoft, sql Server, provide a number of useful resources on the evolution of the default parameters that can die of hunger the operating system of resources, where to and where not to store the data in files/logs etc etc, but I've yet to find a similar guide for Oracle. Research on best practices during the installation/initial design in order to avoid the risk of recovery/redundancy later on any line, reliability, availability, performance. Guidance most welcome.

  See following note metalink on system requirements for the different versions:

  (Doc ID 169706.1) - database Oracle (RDBMS) Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix OS Installation and Configuration requirements checklist (8.0.5 to 11.2)

  Online Oracle Database Documentation 11g Release 2 (11.2)

  -Som

• Installation of Oracle Database 11.2.0.3 on Centos 6.4 to AWS

  We have been installing and configuring the oracle database 11.2.0.3 with OIAM 11 GR 1 material for a few years with great success.

  RHEL 5.7
  WLS 10.3.6

  OracleDB 11.2.0.3

  OIAM 11 GR 1 material

  OSH 11.1.1.6

  We have recently decided to move our VMs to EC2 from Amazon using CentOS 6.4 environment.  Our client currently has us using the operating system is a hardened version of the RHEL5.7.  We have installed on CentOS in the past, but not to 6.4.  All prereqs are installed, but we do not seem to get the database to set up completely.  Running in interactive or silent mode makes no difference.

  When running in silent mode, we received the following:

  . / runInstaller-silent - ignoreSysPreReqs responsefile - db_install_w_database.rsp

  From Oracle Universal Installer...

  Check the Temp space: must be greater than 120 MB.   Real 6463 MB passed

  Check the swap space: must be greater than 150 MB.   Real 24999 MB passed

  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2015-04-13_04-55-50 PM. Please wait...

  You can find the log of this installation session to:

  /opt/oraInventory/logs/installActions2015-04-13_04-55-50PM.log

  Installing Oracle Database 11 g succeeded.

  Please check ' / opt/oraInventory/logs/silentInstall2015-04-13_04-55-50PM.log' for details.

  [WARNING] [INS-32091] Some of the wizards of configuration failed.

  CAUSE: The Software Installation was successful. But some configuration wizards failed were cancelled or ignored.

  ACTION: Check the logs or contact Oracle Support.

  Check the Setup log:

  INFO: Oracle Net Listener startup:

  INFORMATION: The information provided for this listening port is currently in use by other software on this computer.

  INFO: Beginning of earpiece failed.

  NEWS: Check the file path for more details: /opt/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-1504134PM5854.log

  INFO: Oracle Net Services Configuration failed.  The exit code is 1

  Checking the netca journal

  [main] [2015-04-13 16:58:55.132 UTC] NativeSystem.runRemoteExecCmd [CmdToolUtil.doexecute:473] failed. Command = / opt/oracle/product/dbs/srvm/admin/getcrshome arguments = env [] = error null = null

  [main] [2015-04-13 16:58:55.133 UTC] [HAUtils.getHASHome:938]  Could not get at home.

  PRCT-1011: cannot run 'getcrshome '. Error: null

  oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:483)

  oracle.sysman.assistants.util.hasi.HAUtils.getConfiguredGridHome(HAUtils.java:782)

  oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:934)

  oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:955)

  oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:529)

  oracle.net.ca.ConfigureListener.isHASConfigured(ConfigureListener.java:1516)

  oracle.net.ca.ConfigureListener.isHASRunning(ConfigureListener.java:1538)

  oracle.net.ca.ConfigureListener.validateListenerName(ConfigureListener.java:1785)

  oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:183)

  oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)

  oracle.net.ca.InitialSetup. < init > (NetCA.java:4189)

  oracle.net.ca.NetCA.main (NetCA.java:428)

  [main] [2015-04-13 16:58:55.133 UTC] [HAUtils.isHASConfigured:532]  HA House is null

  [main] [2015-04-13 16:58:55.134 UTC] [ConfigureListener.isHASConfigured:1524]  Is Oracle configured Restart: false

  [main] [2015-04-13 16:58:55.134 UTC] [ConfigureListener.isHASRunning:1553]  Is Oracle Restart running: false

  [main] [2015-04-13 16:58:55.134 UTC] [ConfigureListener.listenerExists:344]  Listener is 'LISTENER' already exists: false

  [main] [2015-04-13 16:58:55.135 UTC] [ConfigureListener.typicalConfigure:215]  Check free beach port: 1521-1540

  [main] [2015-04-13 16:58:55.135 UTC] [ConfigureListener.isPortFree:1080]  Check whether the port 1521 is free on the local computer.

  [main] [2015-04-13 16:58:55.135 UTC] [ConfigureListener.isPortFree:1095]  InetAddress.getByName (127.0.0.1): /127.0.0.1

  [main] [2015-04-13 16:58:55.136 UTC] [ConfigureListener.isPortFree:1097]  The local host IP address: awscentoschrome.amazonaws.com/52.4.205.244

  [main] [2015-04-13 16:58:55.136 UTC] [ConfigureListener.isPortFree:1099]  Local host name: awscentoschrome.amazonaws.com

  [main] [2015-04-13 16:58:55.136 UTC] [ConfigureListener.isPortFree:1115]  IP address: awscentoschrome.amazonaws.com/52.4.205.244, is IPv6 address: false

  [main] [2015-04-13 16:58:55.137 UTC] [ConfigureListener.isPortFree:1118]  IP address: awscentoschrome.amazonaws.com/52.4.205.244 is a link local address: false

  [main] [2015-04-13 16:58:55.137 UTC] [ConfigureListener.isPortFree:1143]  Creating ServerSocket on Port: 1521, IP address: awscentoschrome.amazonaws.com/52.4.205.244

  [main] [2015-04-13 16:58:55.140 UTC] [ConfigureListener.isPortFree:1178] java.net.PlainSocketImpl.socketBind (Native Method)

  java.net.PlainSocketImpl.bind(PlainSocketImpl.java:377)

  java.net.ServerSocket.bind(ServerSocket.java:319)

  java.net.ServerSocket. < init > (ServerSocket.java:185)

  oracle.net.ca.ConfigureListener.isPortFree(ConfigureListener.java:1145)

  oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:219)

  oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)

  oracle.net.ca.InitialSetup. < init > (NetCA.java:4189)

  oracle.net.ca.NetCA.main (NetCA.java:428)

  [main] [2015-04-13 16:58:55.140 UTC] [ConfigureListener.isPortFree:1191]  Back is free to Port 1521: false

  2 things come to mind with the netca newspaper:

  (1) we use NO HA... it seems that we could ignore that.

  2) 1521 port is NOT in use.  I ran netstat - anpl | grep 1521 in 5 second loop delay when running the installation and it never appeared.

  
  

  
  

  Does anyone know if there is something different with Centos6.4 or AWS facilities that would cause this?  In addition, the log shows that the installation went well and it was with the configuration.  The spfile does not exist and when root.sh is run after installation, the oratab has no entry ($ORACLE_SID: $ORACLE_HOME: N |) There > does not exist).

  
  

  Ideas?
  

  Found the question in forums of http://stackoverflow.com . We searched before but does not search the correct error. I searched on "information for this listening port is currently in use by other software on this computer." and found a forum thread that we explained our problem.

  We use AWS as our server provider. AWS has 2 IP addresses he uses. We use for PuTTY in and access the server Public and private one located on eth0. Obviously, the private IP address must be in the file/etc/hosts not the public IP address.

  The database installed and is running.

• Silently installation of Oracle Database 12 c on Ubuntu 14.04. Server

  Hello everyone,

  I try to install the Oracle database 12 c on a headless Ubuntu 14.04 server, using the silent mode of the Oracle Universal Installer with a response file (see attachment). As this Linux distribution does not seem to be officially supported, I followed the instructions, I found in this tutorial, http://tutorialforlinux.com/2014/10/01/how-to-install-oracle-12c-database-for-ubuntu-14-04-trusty-lts-64bit-linux-easy-guide/and was able to install the database software. During installation, as described in the tutorial, I have to change some files makefile in the target installation directory, then click on 'Retry' to continue the installation. Because I need to perform a silent installation, the "Retry" button does not appear and the Installer continues just to complete the installation with the promising message "Oracle 12 c database installation has succeeded.", despite several mistakes of links that I find in the log files. So, I make the suggested changes makefile after installation and retrigger the binding process manually (called "repeat all"), which looks after all ends correctly that I can now run "sqlplus" etc. In addition, I ran the script of post-installation (one of them as a root user), as requested by the installer.

  However, now I find the system without a data base of departure, even though I have it set up in the answer file that I gave to the Oracle Universal Installer. Without doubt, routines important installation required for the configuration of the database have been ignored by the errors of liaison took place. To be complete, they are linking errors I find in the configuration log file (and that I solved it by changing the files makefile and running 'repeat all' after installation):

  Error in invoking target 'all_no_orcl' of makefile ' / home/oracle/app/oracle/product/12.1.0/dbhome_1/rdbms/lib/ins_rdbms.mk'. [...]

  Error invoking the "utilities" in the makefile target ' / home/oracle/app/oracle/product/12.1.0/dbhome_1/rdbms/lib/ins_rdbms.mk'. [...]

  Error in invoking target 'install' of makefile ' / home/oracle/app/oracle/product/12.1.0/dbhome_1/network/lib/ins_net_server.mk'. [...]

  Error in invoking target 'irman ioracle' of makefile ' / home/oracle/app/oracle/product/12.1.0/dbhome_1/rdbms/lib/ins_rdbms.mk'. [...]

  Can I rerun the Universal Oracle install from the point where the binding process has failed, i.e., without crushing the makefile changes that I had to perform in the oracle home directory?

  Or is there a way to tell the silent installer to suspend Setup error (giving me the opportunity to resolve the problem immediately) and delivers a 'Retry' to continue the installation from there?

  For development purposes, I need a database of startup clean and fully configured, including pre-installed packages (especially Oracle Spatial).

  Thank you very much for your suggestions!

  Thank you for your answers, I now get a solution to the problem.

  @12cdb: RPM Installation was not an option because it is not recommended on Ubuntu.

  @Srini Vernon-Oracle: I am aware that a Ubuntu system is not an environment supported for installation of database Oracle, as mentioned in my question. There are reasons why the passage to another distribution is not an option in my setup, that's why I asked for advice.

  The solution is the following:

  -Install the database in "Software only" mode (silent, using a response file).

  -Fix the linker errors as described in the tutorial.

  -Recreate a link.

  S ' ensure that the kernel is properly configured as described on this page: http://docs.oracle.com/database/121/LADBI/app_manual.htm#LADBI7866

  -Use "dbca" silently with a response file to create the database.

  Best regards

  Christoph

• Prerequisites on Oracle Linux 6.3 packages are missing for the installation of Oracle database 11 g 2.

  I want to install Oracle database 11 g 2 on Oracle Linux 6.3, but some packages are missing (.) RPM files).

  Please tell me how to install the missing packages (.) RPM files)?

  Some of the missing packages are:

  liabio-devel - 0.3.105

  unixODBC - 2.2.11

  unixODBC-devel - 2.2.11

  and a little more.

  Let me note that there is an Oracle Linux forum where you can get answers more quickly. (I'm linking this thread it mentioning what I guess)

  Also I would suggest using the yum package manager and there is aoracle-rdbms-server-11gR2-preinstall package available which install all prereq packages...

  See more here: How I Simplified Installation of Oracle Database on Oracle Linux

• The customer need to oracle database in the installation of the EPM FDM

  Hi all

  I want to install EPM11.1.2.2 products and on one server I install FDM. I checked the condition sine qua non of the installation of FDM and according to the guidelines of this customer database Oracle 32-bit and 64-bit client is necessary.

  Server is Windows 2008 64 bit and already Oracle database 11g is installed.

  I have reg queries following it.

  1. If the Oracle database is installed on the same server, do I need to install both clients of the database as well?

  2. If so, I am trying to install oracle database 32-bit client but the screen is endangered shows no newspaper or mistake, but at the same time 64-bit client is installing successfully?

  3. I have not installed ODAC, what is the significance of this facility, and what I need to install the same?

  Help, please.

  Thank you

  Hi all

  Got the solution to the problem of the 32-bit client installation on the same machine where oracle 64-bit database or oracle customer base 64 is already installed.

  I took knowledge oracle support 1292785.1 document IDs and found the solution.

  Thank you for all your help.

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".

• Oracle Database 11 g installation problem: ORA - 12560:TNS: Protocol adapter error.

  People,

  Hello. Initially, my Windows XP host name is 'localhost' and IP 127.0.0.1.

  I installed Oracle Database 11 g with Windows XP successfully and all customers in the database with the database instance running.

  For some reason, I uninstalled all of the database server and remove the whole installation directory /oracle.

  I have configured the address IP of Windows XP in 192.168.196.101 to ping other machines.

  For my needs, I installed Oracle Database 11 g with Windows XP again. During step 7 of 8: Oracle Database Configuration Assistant, I got this error:

  ORA - 12560:TNS: Protocol adapter error.

  I click on the button "Password management", there is no line in this window (no user name, no account of the lock).

  I have check the listener as below:

  C:\ > lsnrctl
  LSNRCTL > start
  His output: earphone HEADSET name has already been started.
  LSNRCTL > status
  Its release:... Service DB1 has 1 instance. The instance BD1 ready state. The command completed successfully.

  I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is:

  Listen [0] = LISTENER address = (ADDRESS = (PROTOCOL = TCP (port = 1522))(HOST=localhost))

  I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below

  HOST = localhost port = 1522

  I think that HOST = localhost and port = 1522 is the cause of the ORA-12560 error because Windows XP was configured in HOST = 192.168.196.101.

  But I do not understand how to solve this problem.

  Can any folk tell me how to solve this problem? must cancel the installation of 8 on step 7 and install it again?

  
  Thank you.

  > The problem is that I am installing Oracle Database 11 g with Windows XP

  Why? above is NOT a supported combination.

  What makes you think that it should work without error?

• Where to get the installer of Oracle Database Gateway?

  Hi all

  11.2.0.1

  Win7 64 bit

  SqlServer 2005,2008

  I want ot DG4ODBC to install 64-bit windows to create a link to Oracle database to SQL Server.

  While I can migrate selected tables. But I can't find the installer.

  I already searched google and http://www.oracle.com/technology/software/index.html,

  but in vain.

  Help, please...

  Thank you

  zxy

  Hello

  Yes go come and install a 64-bit on a 64 bit OS RDBMS and, hopefully, who should look for your question.

  Kind regards

• Hyperion 11.1.2.2 of Oracle Database 11g installation

  Hi all
  
  We plan to install hyperion 11.1.2.2(64-bit) with 11 g (64-bit) of the Oracle database in windows server 2008 R2(64-bit)
  We must right customer Oracle 64-bit and 32-bit. ! (for FDM, such as recommended in the installation documentation)
  
  If so, we install all products in one machine. What client (32 or 64-bit), it must first install?
  
  Is it necessary to install also the ODAC?
  If so, that is we must install 64-bit or 32-bit?
  
  any help would be appreciated.
  
  Kind regards
  Mady

  Hi Mady,

  We do not have everthing on a box, but also use all 64 bits.
  Client Oracle is 11.2.0.3

  I checked
  Oracle JDBC/THIN Interface
  Oracle Call Interface
  Net Oracle
  ODBC Oracle driver
  Objects for OLE Oracle
  Oracle OLE DB provider
  Oracle Data Provider for .NET
  Oracle for ASP.NET providers

  Be sure to install the 32-bit version first, then 64-bit on top.

  I hope this helps.
  Roman

• Options of the Web server for the Installation of the APEX on Oracle Database 10g

  Hello. We are installing an APEX on a test server that runs the Oracle 10 g 10.2.0.4.0 database. As I understand it there are two Web Server Options:
  
  (1) oracle HTTP Server (Apache)
  (2) oracle Application Express listener
  
  Do both of these jobs for Oracle Database 10 g 10.2.0.4.0? I thought I remember reading somewhere that only the Oracle Application Express listener only works with version 11 database or higher.

  Do both of these jobs for Oracle Database 10 g 10.2.0.4.0?

  Yes.

  I thought I remember reading somewhere that only the Oracle Application Express listener only works with version 11 database or higher.

  No, only the restriction (except 10 g XE) applies to the third option of web server that you have not mentioned: Embedded PL/SQL Gateway (EPG), such as discussed in your previous thread: + {: identifier of the thread = 2201975} +.

  Requirements for the listener of the APEX

  {forum: id = 858} forum

• Configure Enterprise Manager in Oracle Database 11g

  Dear all,

  I want to configure my Enterprise Manager Console for Oracle Database 11g. During installation I unchecked "configure EM Console."

  I have Oracle Red Hat Linux 6.5, please guide me how can I start my console em on the Linux environment.

  Kind regards

  Atif Zafar

  Hello

  If you want to create or configure Enterprise Manager console, follow these steps:

  • Set ORACLE_HOME environment variable
  • Set ORACLE_SID
  • ORACLE_HOSTNAME environment variable set. Use the same value returned by the command "hostname".
  • Run the emca (Enterprise Manager Configuration Assistant).

  $ emca - create config dbcontrol db-rest

  • Follow the instructions.

  Kind regards.

• Upgrade to EBS and oracle database examples database

  Hi all

  I'm upgrading our database of 11.1 to 11.2.0.4 EBS Note 1058763.1 said the examples of oracle database installation is required. The database examples guide also gives this link: Oracle database software download | Oracle Technology Network | Oracle

  But the link does not 11.2.0.4 software file linux 86_64.

  Am I missing something here...?

  Kind regards

  Vinod

  Hello

  The two 11.2.0.4 of the database and the CD examples are available in the patch 13390677.

  The part of the database is included in the files 1 & 2.

  The examples CD is in file 6.

  Kind regards

  Bashar