Installation - error DS003 - items 13 DVD disc

Similar Questions

• HL-dt-stdvd-ram gh40l - after installation update my driver CD-DVD disc has been deactivated and its drive designation has been removed

  After update for microsoft explorer 9 and several security updates.  my driver cd - dvd for HL-DT-Stdvd-Ram GH40L drive has been deactivated and its drive designation has been removed. How can I fix this problem? -Robert Linardi

  Try this

  http://www.ehow.com/how_5925087_add-DVD-drives.html

  http://support.Microsoft.com/kb/282530

• DVD player stopped working after the installation of 12 items

  First, I loaded the disc DVD in the drive and tried several times to install 12 elements.  Whenever the program has been installed the computer would start flashing and the dvd drive may stop working. Every time I had to use a PIN to eject the DVD because it would not eject.  It worked well before its installation to 12 items. After that the program was finally installed dvd player worked.  But the program would be closed when you use it too often.  I finally just deleted the program of 12 items on my computer and install it on another system.  It's been a while since the abolition of the program from my computer. Tonight, I reinstalled the program Adobe 12 elements with the dvd drive works fine.  Trying to install the program, all loaded fine.  Then once more, the dvd drive eject nor does any work.  What happened several times with 12 elements of loading on my computer.  It is a real pain.  Now the DVD drive doesn't work, or eject.  Can someone help me out here?  It sucks. The other computer works fine.  It is a HP Pavilion, Windows 7 Home Premium system.

  Computer was off all night. Turned on this morning and the system works now.  I rebooted the system, at least six times last night with no result. I don't know what was different this morning, but everything seems to work.  So if it's not broken I will not try to fix it.  Thanks for posting. Dan

• The Lightroom Installation failed: Exit Code: 7 please see specific errors below for troubleshooting. For example, ERROR: DS003... - Summary - 1 fatal Error (s) 0 error (s).

  When I try to install Photoshop Lightroom 6 from the disc I bought from Amazon I get this message: Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DS003 ... -------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 0 error(s) ----------- Payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D} ----------- FATAL: DS003: Installer package might be corrupt. Re-download the installer and try again. (Cannot extract 'E:\Win support files\payloads\AdobeLightroom6-mul\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}'. Error: Error 0 ) -------------------------------------------------------------------------------------  
  How can I solve this problem?
  

  The system configuration required

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• error message: "Please insert a disc into drive DVD D."

  I'm trying to copy files from my hard drive on a DVD. I put a blank disc and get the error message: "Please insert a disc into drive DVD D." have you tried several disks with the same result, & all are empty. The original files were on a disc & system had no problem at the opening of this disc.

  Hello

  Try this to Fix It: http://support.microsoft.com/mats/cd_dvd_drive_problems/ . Not exactly a rare problem in Windows 7.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Windows 8 - Refresh PC pre-installed Windows key recovery or installation DVD disc

  Windows 8 - Refresh PC pre-installed Windows key recovery or installation DVD disc

  The problem is that the number of keys for Windows 8 is required for this operation, and I can't get it. I got Windows8 pre-installed when I bought the laptop, so I don't have the installation DVD, I did not collect the number of keys in any documentation or found on the laptop.

  What can I do to make sure that if I can restore Windows 8 and all my data on the laptop?

  Thanks for your help

  To put it bluntly, YOU n 'T NEED a KEY! When you reinstall Windows 8, it is automatically activated from your key incorporated in the Bios. There is no need for to go you into the Bios to get the key. With Windows 8, it is how it is done. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

• I can't open 14 items installation file from the CD/DVD drive shared on my iMac to my MacBook Air.

  I can't open 14 items installation file from the CD/DVD drive shared on my iMac to my MacBook Air.  I'm getting "can't open the application 'Install' because it may be damaged or incomplete."  The drive is new and I have installed and registered on the iMac smoothly with Adobe. There is no sign of physical damage to the disk.  I did previously with Elements 9 without problem.  Any suggestions please?

  Try to download the installation files instead of using the drive.

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13, 14 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html

• photoshop elements Adobe 13 Installer error (exit code 7) (error DS003) - HELP

  Downloaded correctly.  Installed 100% and I have the following error: (please help)

  Out of
  Code: 7

  Please
  see specific errors below for troubleshooting. For example, ERROR: DS003...

  Summary --------------------------------------

  -fatal error 1, 0 error (s)

  -----------
  Payload: Adobe Photoshop Elements 13 (64-bit) 13.0.0.0
  {609818B9-23EB-4196-B466-EFE05E92A32F}-

  FATAL:
  DS003: Installation Package may be corrupt. Re-download the installer and try
  Once again. (Cannot retrieve '13\64\payloads\AdobePhotoshopElements13_core\Assets2_1.zip F:\Adobe Photoshop Elements'
  to ' C:\Program Files (x 86) \Common
  Files\Adobe\Installers\adobeTemp\ {609818B9-23EB-4196-B466-EFE05E92A32F}'.
  : Error 0)

  you have a corrupted archive.

  redownload the file size with the size of the downloaded file check.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Blu - Ray OK, DVD version gives 'General error' on the construction of disc image

  When you generate the final .iso file of the DVD disc image, I got a warning of 'General error' during one of the final steps. The Blu - Ray since the same project worked perfectly. The error occurred not during video transcoding, but just after the attempt to transcode a file audio small .wav for background music on the menu. Yet once, it worked well for the Blu - Ray, it's 16 bits, 48 kHz, etc.. All menus and video and audio previews also showed no sign of distress.

  Any ideas what to look for? Final for the .iso to DVD transcoding took like 6 hours so I want as supposition little and check the work as possible! Thank you!

  How long is the audio? It may be simply too short to encode a correct DVD. If so, open it in Soundbooth and add silence at the end.

  Mylenium

• 'File name' error too long when you copy a folder to a DVD disc

  When I copy a folder that contains a large number of files on an external hard drive, I have no problem, but if I try to copy the same folder to a DVD disc, I get a message indicating that a file name is too long.  My first question is why do I get the message for DVD and not the external hard drive?  My second question is: How can I generate a list of files in my folder that have too long names? My second question is already other post on the forum, but there was no answer.  Is it because it is not possible to generate such a list?

  Thank you

  It depends on what is called the 'file system '. File systems are how files are stored on a disk. Many of them have limits on how long the total file path can be. DVD and external hard drives use different file systems.

  If you want a list of all the files in a folder, open a command prompt. Type this in:

  CD "C:\path\to\folder".

  and press ENTER. Replace path\to\folder with the path of the file in your file that you want to check to make sure this filepath is in quotes!

  Now type:

  dir /s > 'output.txt '.

  and press ENTER. This will tell the guest to make a list of all the files in this folder and in each subfolder, and then store in a text file. This will allow you to view the list and I hope to find the long file names. Once you have found the long file name, go to that file, and then change the name.

  Here is an example of the above commands. Let's say I have a folder named "foo" in the My Documents folder. I first type:

  CD "C:\Users\Entegy\Documents\foo".

  and press ENTER. Now, I want the list of files to be placed on my desk. Then I type:

  dir /s > "C:\Users\Entegy\Desktop\filelist.txt."

  And voila, I have a list of all the content of foo on my desktop files. Just make sure that your path ends with .txt and you'll be fine. And don't forget to put quotes around filepaths!

• Windows installation 7 - lack driver cd/dvd

  Hello!

  First I wanted to greet everyone here, because this is my first post on this forum

  Now to the problem.

  I am the happy owner of HP Pavilion dv7-1150ew laptop. It's a good computer, I really like it, but the operating system it came with (Vista Home Premium) was temporary from the beginning. I knew from the first day I'll install Windows 7 as soon as it is available. And the day came. Windows 7 Professional has appeared on the MSDNAA site. I downloaded the 64-bit version, burned the DVD disc and waited for the weekend to come and do the installation and post-intallation stuff.

  So, I am user of Windows 7 now? No I'm not. I don't even have to the installation process the Setup starts perfectly, I choose the language, then I click on install now, wait and... 'Lack of the required CD/DVD drive driver' message. Here is what I tried:

  -installation of the USB stick (formatted the USB stick to NTFS using diskpart, unzipped the iso on USB with ultraiso and winrar)

  -Intel ICH9M/E-M AHCI SATA driver version 8.9 by providing the installer - it displays the progress during a certain time, then the message bar "no new device not found" is displayed

  -install the 32-bit version

  -installation of the USB stick with DVD and secondary hard drive disconnected

  -clean install hard drive (I dropped the system partitions and recovery)

  -update the laptop BIOS

  -update the firmware of the DVD player

  Still the same problem. No driver required, and if I load the Intel SATA driver - no new device.

  Windows 7 Professional from MSDNAA is at least RTM version, because it has no RC, beta or whatever next to him.

  I Googled that people who have had this problem solved by changing the SATA from AHCI Mode IDE controllers (or another), but the BIOS on the laptop DV7 is not all about the option.

  Someone at - it ideas? Please?

  Just google this error and found many discussions about this in the TechNet forums. I suggest you to search this place for better results and post the steps that worked for you here. Just linking you to a thread below that could be useful.

  Click here

• I have a black and white 2 on windows installation error 7...

  I have a black and white 2 on windows installation error 7...

  things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

  guys what should I do... Please help me... I like this game very much

  I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...

  
  

  guys what should I do... pls help >< i="" love="" this="" game="" so="">

  If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

  Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

  There are a few things to try:

  1. find the Setup program you are running for the game and which run in XP compatibility mode.

  2 in case of failure too and then try to run it in XP Compat mode and as administrator.

  I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

   

• DVD player does not read DVD discs, or does it only intermittently.

  Toshiba Satellite A135 laptop.

  w/Vista Home Premium;

  has a drive TSSTcorp CD/DVGW TS-L63D DVD/CD-RW.

  Hello

  You really need this post in the Forum of Driver and Vista Hardware. A moderator will move
  There are.

  Answers - Vista - Hardware - Forums
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  ================================================

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  A CD/DVD cleaner might help.

  ------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD DVD player: can not read data DVD discs that burned same machine

  Laptop with Windows Vista cannot read data DVD discs that burned same machine.  The discs work on another computer.  My laptop will read CD disks, he did, and it will play DVD movies. What's wrong?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 parts to no function
  while others are doing so correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner
  could help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always
  issue.

  CD/DVDs have a tolerance + - and your can read/write on the outside edge
  tolerances of the disks. They may be delivered, but it is usually cheaper to replace
  the reader.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my window media does not play wen I insert the dvd disc it say that a compatiable device is not install please tell me what I need to do thanks.

  Hello my pblem is that my Windows media player does not play wen I insert my dvd disc it say that a compatiable device is not installed please help me thanks in advance

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.