Installation of 10g (10.2.0.1) on Linux86 OEM grid control

Similar Questions

• 10g (10.2.0.1) for Linux86 OEM grid control

  Hello
  
  I managed to install OEM 10 g control Grind for RHEL 4.6
  
  How to stop services? and also the EMREP database?
  
  Is there a .env to the source file so that I can run "sqlplus" like EBS?
  
  
  Thank you very much
  
  Ms. K

  Hello

  Use the emctl start/stop command services.

  Start and stop of the Enterprise Manager components
  http://download.Oracle.com/docs/CD/B14099_19/manage.1012/b16242/emctl.htm

  Thank you
  Hussein

• Upgrading to 10g to 11g agent and switch to another grid control

  I have sent a NEW Grid Control 11 g on a new server, but all my targets are enrolled in an OLD 10 g grid control.
  
  Now, I would like to upgrade an agent 10 g saved with grid OLD command 10 g for an oracle target 10.2.0.5 dabase running 32-bit Windows),
  using the pull (agentDownload.vbs) method.
  
  It is supported to run agentDownload.vbs in upgrade mode by specifying the NEW grid control?
  
  My environment:
  OLD Grid Control 10.2.0.5 on Windows 2003 x 64
  NEW 11.1.0.1 on Linux x 64 Grid control
  Oracle 10.2.0.5 database TARGET. Standard running on Windows 2003 x 86
  
  Thank you
  Julian

  Hi Julian,.

  You cannot run this mentioned during the upgrade. But after upgrade, you can point a WHO to another agent using the following document:

  How to point an Agent to a different grid WHO control and a repository? (Doc ID 413228.1)

  NOTE: Please note that this procedure is valid only for the agents of 10 GB & 11g. This procedure is not valid in 12 c.

  Best regards
  Vincent

  Published by: Vincent thiruveedhi on April 19, 2012 02:57

• Grid Control 11g R1 installation YES-10133 error

  Hi all
  
  I'm installing Oracle Enterprise Manager 11 g Release 1 on x86_64 SUSE Linux 10. Here I am faced with an error * "YES-10133:Invalid rest area. There is no top-level for Linux for the Installation component in the transit area. » *. Installation packages have been downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unpacked. Someone on the internet said that these zip files must be extracted to a directory. But I see some folders exist in all the three unzipped files are the same, but contain different files. If I put them in a directory that they would be "crushed." What should I do? Please suggest. Thanks in advance.
  
  Best regards
  Guangming Duan

  864397 wrote:
  Hi all

  I'm installing Oracle Enterprise Manager 11 g Release 1 on x86_64 SUSE Linux 10. Here I am faced with an error * "YES-10133:Invalid rest area. There is no top-level for Linux for the Installation component in the transit area. » *. Installation packages have been downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unpacked. Someone on the internet said that these zip files must be extracted to a directory. But I see some folders exist in all the three unzipped files are the same, but contain different files. If I put them in a directory that they would be "crushed." What should I do? Please suggest. Thanks in advance.

  Best regards
  Guangming Duan

  Hello Sylvia,.

  You must decompress all the files in the same directory. Don't worry about records. Unzip tool will extract the files in the correct folders (will not overwrite the contents of the folder).

  Concerning

  Grosbois

• 10g Grid Control with database 11g

  Hello
  
  According to the name of the topic, it is possible to manage a database 11g with 10g grid control? The situation is that 10g grid is up and running and we have several new 11g databases, can they be added?
  
  After that, when I try to install an agent from the web interface, I'm invited only with the Linux platform, however the 11g database is under Windows, how can this be resolved? (Enterprise Manager Grid Control works on linux)
  
  Thank you very much for the input.

  Mika wrote:
  Hello

  According to the name of the topic, it is possible to manage a database 11g with 10g grid control? The situation is that 10g grid is up and running and we have several new 11g databases, can they be added?

  Yes, it can. But better to use the Agent and the Group of OEM Grid Control 10.2.0.5 patch.
  Learn more Oracle Enterprise Manager Grid Control Certification Checker ID 412431.1*.

  After that, when I try to install an agent from the web interface, I'm invited only with the Linux platform, however the 11g database is under Windows, how can this be resolved?

  Not sure I understand how you install the agent, could you clarify? It comes from the OEM Grid COntrol? Have you downloaded the Agent for Windows?

  Nicolas.

  Note added MOS
  Published by: 399642 on November 30, 2010 11:51

• installation of 10g on OEL5.5 (Details of the required package)

  Hello all;

  I need information about the packages required for the installation of 10g.

  It's for my free practice only between two VMs on the same host and not for commercial purposes.

  Usually I select after to the parcel. IS it enough? or do I have to add a few extra packages?

  GNOME desktop environment

  Editors in Chief

  Internet graphics

  Text on Internet

  Development libraries

  Development tools

  Existing software development

  Server Configuration Tools

  Administration tools

  Base

  Support for software

  System Tools

  X Window System

  System Tools

  If I need additional packages, please provide details.

  Thanks in advance...

  The valid oracle package is available for Oracle Linux, RHEL not. Oracle-validated packages will fire the installation of the required packages and also configure your account settings and the oracle kernel.

• Installation of 10g of OBIEE

  Hello
  
  I do the installation of 10g of obiee. I will have two boxes unix as primary and secondary and want to make it as NAS is shared between the two servers of the cluster. So I need to install it on a box mmee or both boxes.
  
  Thank you

  Hi RM,.

  Yes, you must install OBIEE on both boxes. However, you will need to a part of the cluster with a box including the cluster controller running BI servers on both boxes. You can use the NAS to store the global cache.

  I hope this helps.

  Thank you
  Diakité

• Questions about 10g Grid Control (where/how)?

  Should install US 10g Grid Control on a separate machine, then our production database server or is it play nice on the same machine? The production server is a decent UNIX machine currently used 12 instances; We have capacity/room for EM if it will work well here. If this is the best on a separate machine, will be Windows 2003 (2 CPU 2 G of RAM) enough?
  
  The current databases are all 10.2.0.4 and configuration with Enterprise Manager on an individual basis. Should I remove or stop these agents EM if I go to the Grid Control?
  
  Thank you.

  You can certainly seven. database repository of WHO and in large installations, it is highly recommended. If you are going to hang Grid control for monitoring and alert you want as stable as possible to ensure the capture and alert as expected and breakdowns in the grid control functions affect not your ability to be alerted when monitored environment has a problem.

  It is not necessary that the repository of control grid and WHO will be on the same platform there fore mix windows and unix to the SGC and the repository is fine, but ensure that the environment will be as stable as you need it to be to achieve the objectives of grid control.

• 11G Grid Control Installation.

  Hello
  
  I need to install 11g grid control in a server, using the grid control, I need to maintain and manage 4 different databases, they are running in different servers.
  
  Please guide me what stage I must follow.
  
  Note:
  Each target, I need to install the management agent? and how to install the management agent?

  I suggest that get you the latest version on EM 12.10.2 rather than 11 g. You can install costs em 12.1.0.2 SGD and agents to install 12.1.0.2 on your DB. Agent note 11g will not work with 12 ch. SGC or vice versa.

  EM 11 g installation guide
  http://docs.Oracle.com/CD/E11857_01/install.111/e15838/install_em_exist_db.htm#CIAIGDIH
  agent installation guide
  http://docs.Oracle.com/CD/E11857_01/install.111/e15838/install_agent_usng_console.htm#CACJEFJI

• Grid control installation

  Hello!
  
  
  To install the Grid control
  
  -What is the possible version of the database for the grid control,
  -where it is possible to download the application of the grid control?
  
  Please notify
  
  Thank you and best regards,
  Pavel

  Hi Pavel;

  -What is the possible version of the database for the grid control,

  -where it is possible to download the application of the grid control?

  The latest version is 12 c
  http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/downloads/index.html?origref=http :// www.oracle.com/us/technologies/grid/index.html

  To see the facility:
  http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/documentation/index.html
  Master Index for the grid Service control management (OMS) high availability (HA) environment: Installation and Administration [1304492.1 ID]

  "" PS: for your problem of future grid, I suggest farm your thread here that change the status of the thread to answered and move it to Forum Home "business management" Enterprise Manager which is dedicated GRID forum site.

  Respect of
  HELIOS

• Oracle Grid control - installation of JDK

  I want to install Grid Control on linux 5. one of the steps is to install jdk1.6.0_18 from Oracle binary file jdk-6u18-linux - x 64 .bin. After I installed it, I checked the version of java and it does not seem right:
  

  CD jdk1.6.0_18/bin
  Java-version

  java version "1.4.2".
  gij (GNU libgcj) version 4.1.2 20080704 (4.1.2 - 51 Red Hat)
  
  I expect to have the 1.6.0 version but it shows 1.4.2.
  
  Can someone throw some lights?
  
  Thank you
  
  S.

  Hello

  It seems that the path or the CLASSPATH environment variable is pointing to an earlier installation of the JDK.

  The following link can help: http://docs.oracle.com/javase/tutorial/essential/environment/paths.html

  Thank you
  Cree

• Is 10g Grid Control compatible with Database 11g R2?

  Hi all
  
  I tried the certificaction for grid control matrix in Metalink and it shows the latest compatible version of the database to create the repository is 11.1 also I do not know if he could watch a 11.2 database...
  
  If I try to install the usual way, I get an error of invalid version and if I use the silent mode, I'm stuck on an error, so I guess that, for now, it is still impossible.
  
  Any of you have had experiences like mine? I had planned to use it to administer Data Guard...

  If he could watch a 11.2 database...

  It can monitor, at least the basic functions, I added a database of 11 GR 2 targets being watched (more exactly the agent discovered it correctly). New features (and some for dataguard, too) are not yet covered. And it is not supported. 10g is not very accurate, is not the latest version 10.2.0.5 running on Windows Server 2003, don't know about the lower versions.

  The lack of official support, I would not included another 11 GR 2 databases in production environments.

  Werner

• Oracle10g grid control installation - management service hostname

  Oracle 11g R1 RHEL 4 64-bit
  Grid Control 10.2.0.4
  
  Hi all
  
  I install the Oracle agent and when I get to the screen 'Specify Oracle Management Service rental' asked 'Management Service host name'. Is it the same as my host name of the database server? I don't know what to put here. When I do not have the host name of the database server in, and then he said: he can't locate port 4889 on this server. However, if you continue through the Setup all succeeds in the end. BUT, when I go to the link http:// < management_service_hostname >: 4889/em then nothing appears. I'm new with grid control. Anyone have any ideas?
  
  Thank you.

  OK, so you say install Grid Control 10.2.0.3 and then patch it to 10.2.0.4 can then be used with 11g? I think that I get it now.

  Correct, since you have a 64-Bit, 10.2.0.3 full installer is available for this OS.

  Thanks Bobcatalog

  You are welcome

• Installation of 10g on Windows XP

  Hi friends,
  
  I was installing on windows xp to oracle 10g, one of the constituents associated with network has failed and the indicated error was installation supports the system with DHCP MS Loopback adapt to the main network adapter on the system...
  
  Remaining components were successful, so ignoring the error above I install 10 g, now it works correctly and how resolve the above error...
  
  Please, someone guide me to this error...
  
  Thank you and best regards...

  According to the documents, you must use the static IP address:

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16773/reqs.htm#BABBDGBI

  How to install the loopback adapter (including Windows XP):

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16773/reqs.htm#BABGHEFB

  Best regards

  Gokhan Atil

  -------------------------------------------------------
  If you answer this question, please mark appropriate as correct/useful messages and the thread as closed. Thank you

• Installation of 10g application server.

  Hello
  I want to install 10g application server in my Linux Machine... I want to know if I can install this application server
  on RHEL5.

  Salvation;

  What is your exact version? Refer to the installation guide,

  http://www.Oracle.com/technetwork/indexes/documentation/index.html

  You can find which certified platform is from prior software request. You can also check this info from the matrix of certification that is available to
  http://www.Oracle.com/technology/support/MetaLink/index.html

  Respect of
  HELIOS