Oracle10g grid control installation - management service hostname

Similar Questions

• Grid control installation

  Hello!
  
  
  To install the Grid control
  
  -What is the possible version of the database for the grid control,
  -where it is possible to download the application of the grid control?
  
  Please notify
  
  Thank you and best regards,
  Pavel

  Hi Pavel;

  -What is the possible version of the database for the grid control,

  -where it is possible to download the application of the grid control?

  The latest version is 12 c
  http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/downloads/index.html?origref=http :// www.oracle.com/us/technologies/grid/index.html

  To see the facility:
  http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/documentation/index.html
  Master Index for the grid Service control management (OMS) high availability (HA) environment: Installation and Administration [1304492.1 ID]

  "" PS: for your problem of future grid, I suggest farm your thread here that change the status of the thread to answered and move it to Forum Home "business management" Enterprise Manager which is dedicated GRID forum site.

  Respect of
  HELIOS

• 11G Grid Control Installation.

  Hello
  
  I need to install 11g grid control in a server, using the grid control, I need to maintain and manage 4 different databases, they are running in different servers.
  
  Please guide me what stage I must follow.
  
  Note:
  Each target, I need to install the management agent? and how to install the management agent?

  I suggest that get you the latest version on EM 12.10.2 rather than 11 g. You can install costs em 12.1.0.2 SGD and agents to install 12.1.0.2 on your DB. Agent note 11g will not work with 12 ch. SGC or vice versa.

  EM 11 g installation guide
  http://docs.Oracle.com/CD/E11857_01/install.111/e15838/install_em_exist_db.htm#CIAIGDIH
  agent installation guide
  http://docs.Oracle.com/CD/E11857_01/install.111/e15838/install_agent_usng_console.htm#CACJEFJI

• Oracle Grid control - installation of JDK

  I want to install Grid Control on linux 5. one of the steps is to install jdk1.6.0_18 from Oracle binary file jdk-6u18-linux - x 64 .bin. After I installed it, I checked the version of java and it does not seem right:
  

  CD jdk1.6.0_18/bin
  Java-version

  java version "1.4.2".
  gij (GNU libgcj) version 4.1.2 20080704 (4.1.2 - 51 Red Hat)
  
  I expect to have the 1.6.0 version but it shows 1.4.2.
  
  Can someone throw some lights?
  
  Thank you
  
  S.

  Hello

  It seems that the path or the CLASSPATH environment variable is pointing to an earlier installation of the JDK.

  The following link can help: http://docs.oracle.com/javase/tutorial/essential/environment/paths.html

  Thank you
  Cree

• Grid control

  Hi all
  
  30%
  SLES 11
  
  Kindly help me in this endeavor.
  

  Oracle® Enterprise Manager Grid Control Installation and Configuration Guide
  10g Release 5 (10.2.0.5.0)
  Part Number E10953-15

  18 configuration Enterprise Manager for Active and Passive environments

  18.1 using Virtual Host names for environments Active and Passive high availability in Enterprise Manager Database Control

  Set Up the Alias for the Virtual Host Name and Virtual IP Address
  
  You can set up the alias for the virtual host name and virtual IP address by either allowing the clusterware to set it up automatically or 
  by setting it up manually before installation and startup of Oracle services. The virtual host name must be static and resolvable consistently 
  on the network. All nodes participating in the setup must resolve the virtual IP address to the same host name. Standard TCP tools similar 
  to nslookup and traceroute commands can be used to verify the set up.

  My question is, for the paragraph that precedes, it seems to be missing details. It is assumed that the reader already knows how do?
  
  Can you help me find the docs missing details for this?
  
  
  Thank you
  
  zxy

  Still, if you want to create a cluster of operating system level, you must level operating system, software clustering. Which is provided by the operating system vendor (or a third party for the operating system) not by the hardware vendor. This is why you said now many times that there is no such thing as 'Dell clusterware provider'. If you are looking for something that does not exist, you are unlikely to find something useful.

  In your thread in duplicate (one of the reasons why it is annoying to have multiple threads duplicate with a different story and its context), I you pointed a clusterware solution for linux operating system. Hemant suggested others. If you're dead set on using OS clusterware to create a cluster rather than using CARS, you will need investigating one or more of these options to determine which work for you.

  Justin

• Grid Control 11g of the problems with the basic policy of RAC database

  We have a group of three nodes 11 GR 2 (rac1, rac2, rac3) and a policy based RAC database 11 GR 2 (ORCL) with cardinality 2 (ORCL_1 and ORCL_2) on this group. Used to monitor the Control 11g Grid infrastructure. Founded political RAC databases are linked to the pools of the server and not to the cluster nodes, therefore, restart the cluster database instances can run on both on 3 nodes in the cluster. For example, if ORCL_1 is running ORCL_2 and rac1 rac2 Sir after a full reboot ORCL_1 and ORCL_2 can be run on rac2 and rac3 respectively. Binding of the pool with two special nodes will be as if we use database RAC database administrator and not the policy based.
  
  Now the problem is that Grid Control registers the services in database with the node that is running the instance due to which, once the instances are started on a different node, she complained authorities are declining. We don't have to then reconfigure database instances and say Grid Control that they are now on another node. However, this removes the history of AWR for these instances.
  
  Is there a solution to this problem?
  
  Kind regards
  
  Kashif.

  Hi koko,.

  to work around this problem (I think that there is no "automatic" support in the current version of EM for switching hosts databases), you can create an ACTION_SCRIPT for your database cluster resource that is running the relocate_targets command emcli (so an emcli should be placed on all nodes of your and recorded with Super Administrator privileges). So every time you start your database resource, this script command / move the target to the current host without losing any historical information.

  Best regards
  Robert

  Edit: You can find an example of the command emcli in this document written by Rob Zoeteweij: http://oemgc.files.wordpress.com/2011/02/manage-node-failover-in-an-active-passive-setup-using-oracle-enterprise-manager-grid-control1.pdf
  In this scenario is an active/passive environment, but the command itself appies to your situation, too.

  Published by: Robert Hanuschke on August 1, 2011 13:11

• Requirements to install grid Controll 11g in Windows Server

  Hi guys,.
  
  I met application Grid Control 11 g on Windows Server that has an installed database and Enterprise Manager configured.
  I followed the official docs and viewing the video how to make the Grid control installation in OTN.
  I deconfigured Enterprise Manager, then installed the JDK. I installed Oracle Grid Control, but I ended up installing Web Logic, Fusion Middleware and then next is the grid. I'm on the right track?
  
  I remembered installing 10g grid and I just installed the grid and Agents.
  
  I'm on the right track? Thank you!

  The installation of OEM GC 11, you must first install WLS.
  Make sure it's 10.3.2 because it's the only exit from suppored to OEM GC

  Take a look at my Oracle SUpoprt note: step by step Installation of 11.1 Grid control * [1059516.1 ID] *.

  Concerning
  Rob
  http://oemgc.WordPress.com

• I can't install OEM Grid control on the client computer?

  Hello
  I have two instances of database (11g). I would like to install Oracle Enterprise Manager Grid Control they manage. Can I install OEM Grid Control on the client machine, or just on the server, where are instances of database?
  
  Thanks awfully for help.
  Concerning

  Hello

  You can install OEM Grid control on a separate server.

  But remember that for OEM grid control, you need a database in the repository. This repository can be on the server used for the OMS (Oracle Management Service) or on a separate server:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/overview.htm#CJAHHFEA

  In any case, it must be aware that Oracle, Oracle Management Service and the repository Agent must be able to communicate with each other and to use specific Ports.

  So be sure that these Ports are open and free to use.

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/firewalls.htm#i1005951

  Hope this helps.
  Best regards
  Jean Valentine

• Install 10.2.0.1 grid control

  I keep running into this problem with my Grid control installation on my SLES 10 box. I tried to reinstall my SLES 10 environment and no luck. It gives the warning to the
  

  Checking for the Hostname...
  Check complete. The overall result of this check is: Failed <<<<
  Problem: The host name in /etc/hosts is not proper.
  Recommendation: Please verify the hostname in /etc/hosts. The /etc/hosts might either contain short host name or ip address instead of full host name.

  My file/etc/hosts looks like this
  

  #
  # hosts         This file describes a number of hostname-to-address
  #               mappings for the TCP/IP subsystem.  It is mostly
  #               used at boot time, when no name servers are running.
  #               On small systems, this file can be used instead of a
  #               "named" name server.
  # Syntax:
  #    
  # IP-Address  Full-Qualified-Hostname  Short-Hostname
  #
  
  127.0.0.1       localhost
  
  # special IPv6 addresses
  ::1             localhost ipv6-localhost ipv6-loopback
  
  fe00::0         ipv6-localnet
  
  ff00::0         ipv6-mcastprefix
  ff02::1         ipv6-allnodes
  ff02::2         ipv6-allrouters
  ff02::3         ipv6-allhosts
  <my ip>   DLIWSB3AH.MT.GOV DLIWSB3AH

  I tried to change
  

  <my ip>   DLIWSB3AH.MT.GOV DLIWSB3AH

  a little

  <my ip>   DLIWSB3AH.MT.GOV

  with no luck...
  
  Any Suggestions?
  Tom

  Can you ping the server with the given host name?
  Try adding the hostname to lowercase instead.

• Monitoring of the EBS R12 in grid control

  Hello
  
  I try to control EBS R12 in grid control. So far, I followed the AMPInstallGuide.pdf guide and corrected my grid control installation. I also followed the related documents in this thread How to start ebs R12
  
  I have an agent that is running on the server of the EBS and I can see the database as expected.
  
  I don't see anything else right now.
  
  Is there something fundamental, that I'm missing?
  
  On the application of the patch Patch 5843357 -R12 APPS PATCH FOR the PATCHES REQUIRED FOR the plugin EM
  
  do this as 'applmgr' or 'oracle '?
  
  concerning
  
  Alan

  Hi Alan,

  You must run AutoConfig on the database layer, and then on the application layer, even if you have a single node installation.

  The steps are:

  Run AutoConfig on the database layer:

  -Login as user oracle
  -Source file of database env
  -Issue "" cd $ORACLE_HOME/appsutil/scripts /".
  -Run the automatic configuration script (adautocfg.sh)

  Run AutoConfig on the application tier:

  -Login as user applmgr
  -Source file env
  -Issue "cd $INST_TOP/admin/scripts.
  -Run the automatic configuration script (adautocfg.sh)

  Note: 387859.1 - AutoConfig helps manage system Configurations in Oracle E-Business Suite Release 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=387859.1

  I hope it is clear now.

  Kind regards
  Hussein

• Installation of Enterprise Manager Grid Control 10.2.0

  Hello
  to install Oracle Enterprise Manager Grid Control 10.2.0. that I should
  1. install 10 g Release 1 (10.1)
  2. apply the patch nnnn (which COMP)?
  Is it possible to install Enterprise Manager Grid Control 10.2.0. from scratch? Where can I download the resource?
  Thank you.

  Here

  Link: [http://www.oracle.com/technology/software/products/oem/index.html]

  See documentation Readme

  SS

• Latitude E6430 - Dell control | Power Manager installs in Win7Pr6 arch - 25025 err

  Hello

  I recently bought a Dell Latiture E6430 refurbiished, who came with win7 pro x 64. As I don't have full trust in the seller, I decided to reinstall the OS from Dell (win7 pro x 64-glb Polish) DVD. Of course the drivers detected for my tag are installed (and updated by "Dell Control |") Updated".

  However, with reinstall it I lost the ability to control the way in which the battery is maintained. If I understand correctly, this must be obtained by "Dell Control | "Power Manager". Before you reinstall, it worked. But this app is not detected for my service tag. I tried to install different versions that were available for this model, including the recent

  System - Utilities_Application_3N7TV_WN32_2.1.0_A00. EXE

  System - Utilities_Application_0X5N4_WN32_2.1.1.EXE

  (w32, but both are theoretically "32-bit executables for 64-bit architecture")

  They only moved it back 25025 (unsupported system) error. Any ideas how to approach this problem?

  I suspect that this isn't a hardware problem, as the management of the battery worked before system reinstall.

  Jesse, thank you very much.

  I followed good order during my first attempt, with a significant exception - I don't have dotnet4/4.5/4.62 installed. Otherwise, the installation failed for ' Dell order | Be able to manage"and of"Dell Feature Enhancement Pack"(I have not installed one on the other, I know that they compete. I tried the latter as the first failure in the manner described - error 25025).

  I drove back to the installation of the provider (backup turned to be useful) just to find out that I have a laptop with DFEP installed, and it is this package that provided control over battery scenarios.

  So with the new installation, I've got dotnet installed, after ' DC | PM"always failed with the error 25025, but installed DFEP ok by" DC | Updated".

  It is now resolved :-)

  TLDR: to get a control over battery scenarios, first install the bios update + chipset + network drivers, and updates of windows including dotnet 4 + 4.5 + updates, then "Dell order | Updated"+ updates detected driver, then in ' DC | Updated"display all updates and install"Dell Feature Enhancement Pack Application".

• Grid Control 11g R1 installation YES-10133 error

  Hi all
  
  I'm installing Oracle Enterprise Manager 11 g Release 1 on x86_64 SUSE Linux 10. Here I am faced with an error * "YES-10133:Invalid rest area. There is no top-level for Linux for the Installation component in the transit area. » *. Installation packages have been downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unpacked. Someone on the internet said that these zip files must be extracted to a directory. But I see some folders exist in all the three unzipped files are the same, but contain different files. If I put them in a directory that they would be "crushed." What should I do? Please suggest. Thanks in advance.
  
  Best regards
  Guangming Duan

  864397 wrote:
  Hi all

  I'm installing Oracle Enterprise Manager 11 g Release 1 on x86_64 SUSE Linux 10. Here I am faced with an error * "YES-10133:Invalid rest area. There is no top-level for Linux for the Installation component in the transit area. » *. Installation packages have been downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unpacked. Someone on the internet said that these zip files must be extracted to a directory. But I see some folders exist in all the three unzipped files are the same, but contain different files. If I put them in a directory that they would be "crushed." What should I do? Please suggest. Thanks in advance.

  Best regards
  Guangming Duan

  Hello Sylvia,.

  You must decompress all the files in the same directory. Don't worry about records. Unzip tool will extract the files in the correct folders (will not overwrite the contents of the folder).

  Concerning

  Grosbois

• Installation of 10g (10.2.0.1) on Linux86 OEM grid control

  Hi friends,
  
  I managed to install OEM grid in our RHEL 4.6 Server (1st time).
  
  At the end of installation, I received this message:

  See below for information pertaining to your Enterprise Manager installation:
  
  
  1. Use the following URL to access the Enterprise Manager Grid Control:
  
  http://server01.ebiztech.biz:4889/em
  
  
  2. The Enterprise Manager installation includes an Oracle Application Server instance, which is administered using a special "ias_admin" user account. The following information was defaulted for the embedded Application Server instance:
  
  Instance Name:    EnterpriseManager0.server01.ebiztech.biz
  ias_admin password: This password is the same the SYSMAN account.
  
  
  3. The connection details for the Enterprise Manager Repository are:
  
  Host: server01.ebiztech.biz
  Port: 1521
  SID: emrep

  I can do #1 and #3.
  How do you get #2? What is the URL to it? Or is it done through SQLPlus?
  
  Thank you very much
  
  Ms. K

  ytterp2009 wrote:
  REDA thanks, but the e-mail screen does not appear in my installation :(

  Ok.. no problem... I think in 10.2.0.1 as this option is not there

  you are also able to go forward in the installation?

  Concerning
  Rajesh

  Published by: Rajesh Larry on May 24, 2010 16:11

• grid control Oracle enterprise manager 11g

  Hi guys,.

  Is it mandatory to obtain the license for the use of the oracle enterprise grid control manager 11g?

  Yes, the grid is paid outside the database.

  Onkar