installation of 10g to the CentOS error

Similar Questions

• Troubleshooting installation printer driver on the computer. error message: "the arguments are invalid.

  I recently purchased a Brother (MFC-J265W) all-in-one printer that has a wireless capability.  I finished configuring wireless from the machine, however when I tried to install the printer drivers by using the CD-ROM, the installation failed because an error message indicates that "arguments are invalid".  I contacted brother customer service and they said it's a matter of Microsoft.

  A few details:

  I use Microsoft XP Home edition 32 bit SP2. It came installed on my laptop (Acer).

  I've uninstalled and reinstalled the driver several times, but I get the error message.

  I tried to download and install the latest driver from the Brother Web site, but I still get the error message.

  Specifications (in the manual and on the Windows website), the printer IS compatible with Windows XP.

  I would like to know how to solve this problem and also to understand what means the error message.

  Thank you

  When a hardware vendor says "It's a problem of Microsoft", without providing further details, you can be sure that you talk with a person of lazy tech support who wants to end the call and does not know how to solve your problem.

  I suggest that you completely uninstall some pieces of the printer driver and the associated software are already installed using the directions here: Article 1.  Then, disconnect your computer from the Internet, run your antivirus application disable (disable realtime protection) and install the printer as if you planned it or connected to the computer via the USB port, but do not connect the USB cable until you are prompted to do so.

  If you successfully installed printer as a USB printer, converting the wireless connection should be reasonably simple :-).

  If the above procedure doesn't help, especially if you get the same error, return brother support and request that escalating the issue until you find someone who can help you.

• After installation of updates, received the critical error, then stuck in a reboot loop, Windows Defender now firewall and Security Center are all off

  I recently downloaded updates from microsoft. One of them was Security Essentials. Well, when I did caused a critical error. My laptop shut down and restarted. then gave me the same error message and rebooted again. He kept in a continuous loop. I tried the system recovery, but that did not work. I managed to get him to stop, but now my firewall is disabled and the Security Center and Windows Defender. If I try to turn it on, it does the same thing again. I don't know what to do to solve this problem. I need help!

  Original title: critical error

  Hello

  1. you have any multiple security software installed in the computer?
   
  2. What is the exact error message?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Disable all third-party antivirus programs
  
  To disable a firewall, antispyware or antivirus program, right click on the appropriate icon for the firewall, anti-spyware or anti-virus program in the notification area in the taskbar. Then, click exit or click disable.
   

  a. in Windows Vista, click on start toreduce this includes this image, type appwiz.cpl in the Start Search box and press ENTER.

  b. in the list of installed programs, search for and then click on the program in question, and then click Remove.

  c. restart the computer.

  Note After you uninstall a third-party antivirus software, contact the manufacturer of the program or visit the company's Web site to see if a cleaning tool is available to help you remove any remaining files.

  Step 2

  See services

  a. click on start

  b. type services.msc

  c. navigate to the Windows event controller (right click on and select properties)

  d. set the startup type to automatic, start the service, click on apply and OK

  e to navigate to the Base filtering engine (right click on and select properties).

  f. set the startup type to automatic, start the service, click on apply and OK

  g. navigate to 'Windows Firewall' and select Properties (right click on and select properties)

  h. set the startup type to automatic, start the service, click on apply and OK

  Method 2

  Start your computer in a clean boot to avoid conflicts with third-party software.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  
  Note: follow step 7 of the article mentioned above to start the computer in normal startup, once you have completed the necessary troubleshooting.

  Method 3
   
  Look for errors in the event viewer.
   
  Please check the Event Viewer logs to find errors in application logs.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  
  Please post the results for a better understanding of the problem causing the reboot.
   
  Hope this helps

• What installation updates, I get the following error and all updates fail: __code 646 Windows update encountered an unknown error__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Thanks Michael, it worked.

  Enjoy and happy father's day

• Date of Intel Corporation - storage controller - Intel (r) 7 Series Chipset Family SATA AHCI Controller Installation: 1 / 6 / 2016 22:26 Installation status: Details of the failure error message: Code 80070103

  • 0 x 80070103
    Please give the solution for this?

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to refer to the link below and check if this is useful:

  Windows Update, error 0 x 80070103

  I hope this helps.

  Sincerely,

  Ankit Rajput

• OfficeJet 7300: delivering during the installation of software of the printer/scanner for officejet 7300

  After you download and run the printer/scanner installation software, I get the following error that I can't solve. Note that the USB hardware is enabled in the BIOS and drivers are up to date. I tried all USB ports and they work all with different components, including keyboards, external hard drives, devices, bluetooth and other printers. Help, please.

  Error message:

  "This system does not meet one or more of the minimum requirements for the installation of this product. The installation cannot continue.

  Requirement:

  USB drivers

  USB device

  Detials and direction or requirement for USB driver:

  This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB.

  Required measures - click Cancel to exit this software installation. Order to intall this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers.

  Detials and orientation or USB Hardward requirement:

  This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB.

  Required measures - click Cancel to exit this software installation. Order to intall this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers. If you are sure that your computer has the physical USB connectors, refer to the documentation on how to enable USB in the BIOS of your computer. »

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• The Service Pack installation failed with the 0x8e5e03fe error code.

  Hi all

  I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.

  ' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".

  2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.

  Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514

  Error code: 0x8e5e03fe

  State: 7 "

  I took the following steps to resolve. but it's not helping me.

  1. I CA anti-virus, I disabled the Agent Client of CA.

  "2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-04-16 15:49

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 753
  No error found.

  3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "

  Please help me

  Concerning

  Ganga

  Hi Ganga,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get the 80070026 error during the installation of Windows Vista SP2

  Everyway that I try to run my automatic updates for windows I get the error message with the error Code 80070026.  I have Vista service Pack 1.  I do not know there is an update for me who keeps my computer at risk or with this problem.

  I've also disabled my anti-virus (3rd party firewall) and tried to install the update. I get the same error.

  Advice or assistance on the issue would be greatly appreciated.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  «Assistance free unlimited installation and compatibility is available for Windows Vista, but only for Service Pack 2 (SP2).» This support for SP2 is valid until February 26, 2010. »

  Use the link above for Vista SP2 support.

  And for other Windows Update issues:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Update Vista Update Readiness Tool system for Windows Vista (KB947821) [September 2009] - Installation failed due to the error Code 09370001 - how can I solve this problem?

  I have the same error Code 09370001 which appears whenever my PC is trying to install the update: System Readiness Tool for Windows Vista KB947821... I have 7 failures of my PC, try to install this update.

  My system is:
  Windows Vista Premium Hm
  Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  3.00 GB RAM
  Mobile Intel (r) 965 Express Chipset Family

  Can someone guide me how I can get this update to install?

  Thank you so much in advance.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I don't know what error code I get when trying to install KB974417, KB963707 and KB939683. I found a solution for KB974417 which is to install the latest Windows Installer. What about the others? KB963707 and 939683.

  I installed Windows Installer 4.5, because the support microsoft inform me that I have the latest Windows Installer Package to install KB974417. But I can't find solutions for KB963707 and KB939683.

  To get the Windows error meets during updates, you can try to read the Windowsupdate.log file using the http://support.microsoft.com/?kbid=902093 article

  Also try the few measures available under article http://support.microsoft.com/kb/971058, the http://support.microsoft.com/kb/822798 and the http://support.microsoft.com/kb/906602 if they relate to your error.

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO