OfficeJet 7300: delivering during the installation of software of the printer/scanner for officejet 7300

After you download and run the printer/scanner installation software, I get the following error that I can't solve. Note that the USB hardware is enabled in the BIOS and drivers are up to date. I tried all USB ports and they work all with different components, including keyboards, external hard drives, devices, bluetooth and other printers. Help, please.

Error message:

"This system does not meet one or more of the minimum requirements for the installation of this product. The installation cannot continue.

Requirement:

USB drivers

USB device

Detials and direction or requirement for USB driver:

This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB.

Required measures - click Cancel to exit this software installation. Order to intall this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers.

Detials and orientation or USB Hardward requirement:

This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB.

Required measures - click Cancel to exit this software installation. Order to intall this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers. If you are sure that your computer has the physical USB connectors, refer to the documentation on how to enable USB in the BIOS of your computer. »

Advertisement

Hello
Click the Start button and type folder in the search bar, then open the Temp folder indicated.

Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
Open the installation folder.
Find the file usbready.exe and rename it to usbready.old.exe
Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

Now follow the installation and check for the difference.

Kind regards
Shlomi

Tags: HP Printers

Similar Questions

  • I'm unable to install the printer driver for HP OfficeJet G55xi

    I am trying to install the printer driver for HP OfficeJet G55xi.

    When I went to the HP site, it said to install Windows 7 operating system printer driver, by plugging the printer on my Windows 7 computer using a USB cable.  I did, but it was not installed.

    I also need to install the HP Director software.

    I had a computer technician to connect remotely to my computer to install the printer.  He had to install additional tools that are available on the same site where I tried to install the printer driver.  I don't know how he did, but I watched it.  Anyway, he managed to install additional tools, which resulted in the printer being installed correctly.

    It's a pity that the site where I download the printer driver does not provide adequate instructions for how to do this.  I guess the solution is hiring a computer technician to do it for you.

  • Is it possible to add extensions of party 3rd during the trial period for the PS?

    Is it possible to add extensions of party 3rd during the trial period for the PS?

    Yes it is possible.

  • Mac OS 10.5 Hello cannot find the printer driver for P1606dn connected via a wired network.

    I tried to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I have connected the priner to my LAN via the Ethernet cables and Switch 8 port NetGear.  I then properly installed printer driver from the CD provided on the Mac and went into system preferences / Print & Fax to add the printer to the list of the connected printers.  Click on the button «+»  The HP P106dn was listed in the table (kind = Hello).

    I chose this entry in the table, and the dialog box immediately went into action: the pullodwn "to Print using" listed the message 'Please select a printer or driver model' greyed and a spinning wheel called 'Search for new drivers' appeared underneath.  The dialog box search but never find the printer driver (I waited for 20 minutes without success).  I installed some other HP printers in this way on this machine with no problems, for example, HP Color Laserjet 2605dn.  Why this method does not work with this printer?

    I was able to connect to this printer with other (Intel) Macs in my house through this arrangement of LAN.  Is the printer driver for the Intel Macs only?

    I disconnected the printer from the local network and connected directly to my Mac with a USB cable.  The same process, and I was able to connect to this printer.  Successfully print a document page.  Although it gives me a work-around for Mac G5, I need to share this printer with other Macs in my household.

    I went on the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on Mac and repeat the steps for the arrangement of LAN (above) complete the connection via the Print & Fax dialog box.  The result was the same: spinning wheel looking for a printer driver are not.

    I don't know what else to do, or why this facility will not work.  I would much appreciate it if someone could give an explanation for this or any suggestions as to what can be done?

    Ed

    I'm sorry to get back to you on this so late.  I was OOT Sunday all day.

    Ok. So, here is what happened.  As I mentioned at the end of my last post, I was in the process of resetting my printing system, repair disk permissions, then restarting.   Reset the printing system wiped out all my printers in the "Printers" pane in the "Print & Fax" system preferences dialog window  I moved forward and fix permissions of the drive on my system disk.  A number of authorities have been repaired, but nothing that I could decipher impression related ro.  Finally, I restarted my Mac and went directly to the dialog box print & Telec.

    As the printers pane was still empty, I'm gone before adding the simplest of my printers (LaserWriter 360 connected via AppleTalk) who has always been correctly added to the list printers in the past.  No chance!  WAITED a few minutes everything is was "Looking for new drivers.".  I tried the Color Laserjet 2605dn.  No luck.  Then the Laserjet P1606dn.  No luck.

    Thus, this way of solution did not work, and now I was without any driver associated with one of my connected printers.  I decided that I had no choice to rebuild the operating system.  I started my DVD of Installation OS 10.5.4 to rebuild my system (without reformatting my HARD drive).  Once which was finished, I've immediately went to the Print & Fax dialog box and tried to add in each of my printers.  In a few seconds the LaserWriter was added successfully, then the HP Color Laserjet 2605dn, and FINALLY, the Laserjet P1606dn.  Thus, it appeared that my upgrade to OS 10.5.8 was at the origin of the problem.

    I proceed with Sofware Update to restore the computer to OS 10.5.8 and again once, went to the dialog box Print & Fax to experiment with the addition of each of the printers again.  Stopping before the acceptance of each 'Add', I could find quickly and successfully the drivers for each of the connected printers.  So, it doesn't seem to be a problem with OS 10.5.8 find printer drivers.

    After reflection, I concluded that the problem must have appeared during the upgrade to OS 10.4.11 OS 10.5.4, but it remained hidden until I tried to add these new printers to the list of printers.

    I appreciate the reference to the last download Laserjet full feature software.   Since I was able to solve the problem without it, I mind not do the download.

    I want to thank you for patiently stay with me during the last two weeks, your advice and comments.  Just having someone to "talk" about it, it was reassuring and useful that I went along to apply each suggestion to the problem.  I tried to solve this problem several times on my own before that, the search of the forums, and I hesitated to participate actively – to reach out.  I'm feeling very different about it now.  Once again, thanks a lot.

  • Host of the print driver for 32 bit applications has stopped working. Why?

    Host of the print driver for 32-bit applications has stopped working msg apear when giving the print on my RICOH printer N/W command. Why?

    * Operating system: Windows 7 64 bit * 32 bits of MS office 2010 * Print driver 64 bit PCL6 * Adobe Acrobat Reader x.

    SPLWOW64.exe event name: BEX64

    Please give a solution.

    Hello

    (1) did you do changes on the computer before this problem?
    (2) what are the types of documents that you are not able to print?
    (3) is the issue limited only with the Microsoft Office program?
     
    Step 1: Test the problem to the boot to check if it is a question of software conflict. A clean boot to check if startup item or services to third-party application is causing this issue.
    Try to install the updates in clean boot mode, and check if the problem still persists.
    You can read the following article to put the computer in a clean boot:
    http://support.Microsoft.com/kb/929135
    Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
    Step 2: Download printer driver last OEM
     
    Step 3: Uninstall printer related software l and features

    un) go Panel.

    (b) select Uninstall a program under programs and features.

    (c) click on printer drivers , and then click Uninstall.

    (d) wait until the process of uninstallation is completed, restart the computer.

     
    Step 4: printer installation and driver when prompted then only connect printer and check if it helps.
     
    If the question is limited to Microsoft Office, I suggest to return the items listed below and check to see if they help.

    How to troubleshoot print failures in Word 2010, Word 2007 and Word 2003?
    How to solve printing problems in Word 2010, Word 2007 or Word 2003?
    Hope this information helps.
     
  • host of the print driver for applications stopped working 5100cn

    I don't know if my previous attempt at this post went through...

    I've recently upgraded to an SSD and a new installation of won 8.1 (exactly the same thing I had on my old HDD) and now when I try to print from my Dell 5100cn I get the following error:

    Host of the print driver for applications has stopped working

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: splwow64.exe

    Application version: 6.3.9600.17480

    Application timestamp: 545871c 1

    Fault Module name: dlpsc51r.dll

    Fault Module Version: 0.3.1281.4200

    Fault Module Timestamp: 4324d 269

    Exception code: c0000005

    Exception offset: 000000000000cd 87

    OS version: 6.3.9600.2.0.0.768.101

    Locale ID: 1033

    Information additional 1: 1 has 72

    More information 2: 1a7236b9868d6b38d3fd37b43ff05b06

    Information additional 3: 269 b

    Additional information 4: 269b7fc9d660b4191041ae78f0745b83

    For the life of me I can't figure out what I'm doing wrong... The printer still works fine if I swap back to my old HDD so I know its something I do (or not do)... I tried to figure this out all day and have installed several drivers in normal mode and compatibility without result.

    When I open devices and printers on the old drive HARD the printer name reads "Dell Laser Printer 5100cn PCL6" but when I check the devices and printers on my new SSD it reads "Dell Printer 5100cn PS"... So, I know that I do not want to install the same as I have done before and I can't understand what I installed... I use a Toshiba Satillite P75 A7200 if that matters...

    Help, please

    Hi Roydub83,

    Thanks for writing on the Dell Community Forum.

    Please uninstall all the printer driver on the system installed for Dell Laser 5100cn printer and then install the driver on Windows 8 using this link http://dell.to/1ETptNA. Install in compatibility mode if the installation does not engage.

    Answer please if you have any other questions.

    Have a nice day ahead.

  • where can I get the printer driver for canon lbp2900 printer. I'm running Windows 7 on a HP Pavilion PC

    where can I get the printer driver for canon lbp2900 printer.  I'm running Windows 7 on a HP Pavilion PC.  Windows Update does not list a driver for LBP2900 printr

    A quick google found this - http://software.canon-europe.com/products/0010177.asp perhaps?

    I have not tried, I don't have the printer.

    Its usually best to ask the manufacturer of the device for its pilots in the first instance.

  • I can't find the printer driver for my printer to savin C9020 wsd

    I can't find the printer driver for my printer to savin C9020 wsd, anyone know where I can get it?

    Hello

    What operating system do you use?

    I suggest you to check if it is compatible with the operating system you are using.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    I suggest to the manufacture of the printer and check.

    http://www.Savin.com/downloads/default.aspx?HBN=drivers

    See also:

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • Host of the print driver for 32 bit applications has stopped working (v515w) - cannot print in addition to the test pages

    My printer is Dell v515w Red

    Currently, I can only test pages print.  When I try to print from any other application, I get this error-

    Host of the print driver for 32 bit applications has stopped working

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: splwow64.exe

    Application version: 6.1.7600.16385

    Application timestamp: 4a5bd3ca

    Fault Module name: ntdll.dll

    Fault Module Version: 6.1.7600.16559

    Timestamp of Module error: 4ba9b802

    Exception code: c0000710

    Exception offset: 000000000006e3f9

    OS version: 6.1.7600.2.0.0.768.3

    Locale ID: 1033

    Additional information 1: 3edf

    More information 2: 3edf0feac74021b377b392a0115d74c0

    Additional information 3: bf41

    Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9

    I've updated through microsoft and dell and some solutions.

    What is a dell problem or a problem of microsoft?

    My features are-

    Studio Dell XPS 1645, Win7 64 bit, IE8

    extacy1375,

    Unplug the printer.

    Uninstall the printer.

    Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

    Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.

    Links to the 64 bit Vista drivers are to...

    Wireless printer Dell V515w All In One Printer - owners (RED) wire

    Rick

  • hp photosmart 8050 printer, install the printer driver for hp photosmart 8050

    don't know how to install the printer driver for hp photosmart 8050, can't even see. Help

    There are two 8050 models, here are the HP instruction form

    http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01874792&CC=UK&DLC=en&LC=en&os=4062&Product=454816&sw_lang=

  • Officejet 6310 all-in-One fainted during the printing and copying

    I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

    I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

    Thank you.

    Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

    It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

  • Downlad of E5542 driver software does not recognize the printer/scanner

    When I try to run PS5520_1315.exe, I get an error if the printer is not recognized.  I have the printer and the router, also wired USB.  The printer works and the control panel scanner scan function works, but I've never been able to laod any software on my machine - so that I can scan in formats other than images.

    Can you hep please?

    Hi @BagsyBaker

    Did you follow all of the steps in my previous post, up to and including 12-13? If you did, please let me know the result of step 13. It is important that these steps are completed in the order presented.

  • Scanning HP & Capture has a software IP different than the printer/scanner 7510

    I cannot scan to my computer (Windows 8.1) eitheer using the software HP Scan capture & on the computer or the computer function scanning on the 7510.  The IP address of 7510 is 192.168.1.112, but HP Scan software capture & he's trying to get to the IP 192.168.1.100. How can I get two addresses to match?

    The 7510 on-screen scan lists the computer, but when I take it I get a message saying "no computer."

    Any help would be appreciated.

    Thank you

    Hi ho_scot,

    From what you described, I feel that we have made some progress. Rather than scanning with scanning and Capture, let's try to scan from HP scanning. In the printer wizard click on scan a Document or Photo, it will launch the HP scanning. If it still work, so the question is from the other program which I think is a Windows Scan program.

    Weather scan works with the HP Scan or not I suggest to use the doctor HP Print and Scan to see if it will solve the problem. Click here to download and run the utility > HP print and Scan Doctor, it was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers. Here are some common problems that printing and scanning doctor can solve easily:

    • "Printer is offline" or print jobs stuck in the print queue
    • Missing or corrupt drivers
  • Size adapted during the printing of web pages no longer works correctly

    If I choose the scale to fit, the impression is ridiculously small. If I turn off appropriate size and scale is 100%, it turns 3-page 11-page document and each page is trashed. He is brother laser & printing of normal files (not web) is fine, as is printing of web pages in IE. Tried to reset the settings of the print for brother in all: config.

    Is a visible problem in preview before print or preview looks normal and only the real impression is wrong?

    Firefox seems to use only part of the page? Sometimes, Firefox saves a wrong paper size setting. This can be a non intuitive such as name

    printer_printer_name.print_paper_data
    

    At least two other users (one said he had a Brother printer) find this 256 value and change to 1 in all: config solved their problem.

  • Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

    I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

    The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

    Print spooler starts windows 7 error 1053

Maybe you are looking for