Installation of a second HD

Hi, I have a HP ENVY 17 1100 I have a second HD. I read that it is possible to add portable too computers HD, but the parties are usually propritary and must be purchased from the company that sold the laptop.

As far as I can tell that I will need the following

(1) HP Envy 17 HD support

(2) a laptop 2.5 "HD

(3) SATA power cable

(4) SATA cable

I think that any part will do for the last three, the player, I've chosen is a 7200 RPM (the same as the one I have right now).

Are the things I wonder

(1) is there a place to plug into the motherboard and battery.

(2) what are the reference numbers for any owner that I need

(3) where can I order parts of said

Hello

Please look at these:

http://www.YouTube.com/watch?v=0qOzkiY3MZ8

http://www.YouTube.com/watch?v=ecxdfCIZhsQ

ALSE read these:

http://h30434.www3.HP.com/T5/notebook-hardware/HP-envy-17-1050ea-second-hard-drive-size/TD-p/711735

http://www.newmodeus.com/shop/index.php?Main_Page=page&ID=30

Good luck.

Tags: Notebooks

Similar Questions

  • Download Lightroom without installation on a second laptop my cd

    Download Lightroom without installation on a second laptop my cd

    Photoshop Lightroom

    You can get downloads to Lightroom for Windows or Mac from the following link as well as the system requirements.

    To download click here to start

  • Two monitors / installation of a second display driver

    Hello

    I'm not able to get my two monitors running. I just performed a new installation; These monitors were fine with my other drive hard and windows.

    I checked my display drivers in Device Manager and there is only one pilot listed under display cards

    ATI Radeon HD 3800 series

    I know it is supposed to be two of these listed, but there is not... Windows does not detect my secondary monitor... two of these monitors are the same and both connected by a DVI input on the graphics card.

    I've uninstalled and reinstalled the drivers several times with no progress.

    I have excluded sons and defective connectors by switching autour and he always seems to be the same screen that works on its own...

    Any ideas would be appreciated.

    Thank you

    Arthur

    Good so I solved the problem...

    Apparently, all I had to do was the eve of my machine and cut off from all power using the power bar for a few seconds until all residual power is gone, turn back on my machine and Voila!

    An easy solution for this aggravating problem...

  • Installation of cloud second time

    If I tryied to install my licens abo second cloud on my Local PC... the first time the problem is that on my drive C: did not have enough space for LR and PS and now I will install it a my drive d but the download does not start... If I click after downloading on the cloud icon I get the promt if I run or save and I click Run then nothing... also when I click on save and after that start the file downloaded... as nothing happened... so what can I do to install Photoshop and Lightroom on my d drive... I also deleted all folders that I find on drive C: named Adobe... Thankx for any help or assistance in this case

    Installation location of change in HR Applications

    With the application of CC open, select the gear icon in the upper right, and then choose Preferences.  In the preferences of the screen select creative cloud and then look for the drop-down list installation location

  • installation on a second computer Aum?

    Hello, I get an installer creator cloud on a second computer Aum? How do I messages Hauptstr.

    All Adobe software can be installed on up to 2 computers at the same time IF these 2 computers are used by the same person and at the same time. So you may have installed on say a desktop computer for use of Home Office and on your laptop when traveling or away from home.

    It does not installed on 2 separate computers, if both of these computers are used at the same time by 2 different people

  • vCloud vCAC Automation unit distributed Installation Architecture Center second device does not record services

    I work at the vCAC 6.0 installation in a distributed architecture for a production environment.  I have deployed the device of the identity, configuration Netscaler for balancing the load, configure external postgreSQL, followed vCloud Automation Center Documentation until you restart the vcac-server the vcac appliance second service and it never starts or registers the services on the second device vcac.

    The first aircraft arrives as it should and works through the just right load balancer.  After restarting the service vcac-server and 20 minute wait I can't to the second application directly bypassing the load balancer to access the page of the shell-ui-app.  Connect to the console of the second application I tail'ed the output of /var/log/vcac/catalina.out and used netstat - year to view the ports used.  Port 443 just never came up.

    I have filed a ticket with support but thought someone might have fallen on this and can help in the meantime.

    The problem has been resolved with the GA vCAC 6.1 version and using the HA tab for additional devices.

  • Installation on the second computer problem

    Hi, I have a problem installing and hope to find help. Please excuse my bad English, I'm from the Germany.

    I run Adobe full CC as a freelancer one OBA my iMac in the second year now.

    Last week, I bought a used MacPro and wanted to install it on the Mac too, as a second installation.

    I downloaded the installer of creative cloud, logged and downloaded/installed programs.

    When I want to start a program I have only two choices. First, to start the test (what is the test 30 days?). Then to activate it with a serial number.

    I don't remember entered a serial number when I activated my original copy on the iMac first... or I should have one...? !!

    Help, please.

    If you went well all the steps, contact the adobe support, https://helpx.adobe.com/contact.html

  • Installation of a second hard drive in an HP DC7800 Tower

    I am installing a second hard drive in this PC.  Here now, the drive in seems to have bit sockets rubber screwed onto the side of the disc.  These rings slide into the slots in the area of the disc hard turn... anyone know where I could get these little pads?  You can not install the drive without those crossings.  The service rep has no idea what I was talking about.

    tecbal,

    According to the maintenance manual, extra screws are provided for mounting the 2nd disc, see Figure 2-19

    Extra Hard Drive isolation Guide screw http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162202/c01162202.pdf location

  • Installation of a second disk in the Qosmio F30

    Hi guys and girls :)

    I just bought the secondary hard drive for my Qosmio F30, but when I opened the drive Bay, I found that I have a problem with the installation of the drive on my hands.

    First of all, I tried to put the new drive in the Bay and press down lightly to connect with power and data connectors sata and it works perfectly, but it is impossible to move the laptop around since the disc is a bit loose in the Bay and I'm worried a little for my data and the drive itself.

    Then, I opened the first Bay and noticed that original Toshiba drive is kept in place with the help of some mount thin metal plate, which is set on the disk and the Bay with a few screws.

    I checked the Web for any revision of the F30 model that might have pictures of the Bay secondary in his State and found a few. See the photos of the same thing Im. Check this one out, it clearly shows the high Bay (sata connectors are right and not visible):
    http://www.Ferra.ru/images/179/179520.jpg

    Note a small screw hole on the left side of the Bay, clearly intended to fix the mounting plate similar with hdd secondary on the laptop. The plate which is, unfortunately, not included with my computer.

    Did someone here had the same problem and if so, how to solve?

    Hello

    As you have already said the HARD drive need a special framework that maintains the 2.5 HARD drive in the Bay.
    This frame and the screws required, you can order directly from the authorized service provider who is responsible for your country.

    I recommend talking to these guys here and explain what you need.

    Best regards

  • P6620: Installation of the second hard disk

    How to install a second hard drive (4 t) of my HP P6620?  I opened the box and there is no extra cable for adding disks hard disks/CD.  Two slots used for cables are currently being used by the installed hard drive and a CD player.

    Hi @jdrabourn!

    Since all SATA ports are used at the present time, you can go with a SATA multiplier in order to have more drive connected to your PC. Plug you it in to a single SATA port, but limited all disks to the SATA speed (for example 4 discs on a 6 GB/s aura port 1.5 Gb/s limit each). This is different from a RAID controller because controllers allow a potential speed on each disc while the multiplier limited all disks to the single port speed.

    Regarding the cables, you will need additional in order to connect additional HARD drive.

    Hope this helps, and feel free to ask any questions you may have.

    See you soon!

  • Installation of a second SATA HDD in 500-304nd Pavilion

    I recently bought the Office mentioned in the topic, as well as a second 1 TB SATA HDD to add. I found the connections for a second car but unable to find a place on the computer chassis to physically install the disk. What is the secret here? Do I need a room to mount the HARD drive and if so: where can I find one?

    Thanks for your response!

    I found a simple solution to mount the second HDD:
    -J' noticed that the HARD disk that comes with the computer is mounted using the holes at the bottom.
    -J' used the screw holes on both sides of the HARD drive and those identical on the second HARD drive, using four strips of metal (with screw holes on the same distance as the thickness of a HARD drive) and eight live, to link the two together.

  • Is there guidance on the installation of a second DVD player on the p6280t Pavilion?

    I would like to install a second DVD player in my PC, but because most DVD players have their own door opening, like the PC, should I buy a HP drive, or there at - there a way to disable the built in door?  Are there written policies of this?  I have installed additional disks on other computers, but none of them had built in door and built-in open button.  Thank you.  Mike

    Here are the specifications and factory configurable options for your desktop HP Pavilion p6280t CTO. Please consult this guide HP titled "adding or replacing a CD or a DVD player. Just follow the instructions in the guide mentioned above and place the new drive into the open slot. Any SATA optical drive with a load of 'plateau' should work fine. The houses of coverage, two drive doors get opened by the drive platters and the external release buttons press the eject button on the actual readers.

    Please send Bravo

  • Legal installation on the second PC

    Hello
    I recently bought a CD of XP Professional + SP3. He wrote on it, came with a product key, Dell and is described as a "reinstallation CD. It installed and no registered ok on my first pc product key no problem. I had to get some drivers for the motherboard though.

    My question is, can I legally use this disk to rebuild my second pc that has XP home on him using the existing XP Home product key. Is it OK to do this? I still have my original CD of microsoft XP Home, but wouldn't use it for this purpose as its so obsolete.

    Sure. Slipstreaming is a good thing.

    http://theeldergeek.com/slipstreamed_xpsp3_cd.htm MS - MVP - Elephant Boy computers - don't panic!

  • Installation disk hard second - "Uninitialized" says and will not let me format

    In disk management, I see my new drive hard second 1 TB.  It recognizes the 931,51 Go drive, unallocated.  When I walk through the process to configure a partition and format, I get the following error message:
    "The operation cannot be performed because the disk is not initialized."

    I must have missed a step, but reading that I did it is not clear to me what I missed.  Help?

    Thanks in advance.  Branden

    Figured it out.  The player appeared in the red list a small arrow down through the disc.  By right clicking on the arrow pointing down, they gave me the option to "initialize disk".  Now am going forward with the formatting process.  Confused, but hope someone saves some time.

  • Installation of a second hard disk in P6 - 2412 has

    Is there a position to mount a second HDD in case the Pavilion P6 - 2412a?

    I had a peek inside and can't see anything obvious.

    We spare ports SATA and connectors to power supply but I can't find a place to mount the real drive.

    Any ideas (other than to let it hang) would be appreciated.

    Hello

    Those also too ask about it:

    http://h30434.www3.HP.com/T5/desktop-hardware/adding-a-second-HDD-to-an-HP-Pavilion-P6-2450ev-desktop/TD-p/2431067

    http://h30434.www3.HP.com/T5/desktop-hardware/adding-second-hard-drive-to-a-HP-Pavilion-P6-2100-desktop-PC/TD-p/1624857

    http://h30434.www3.HP.com/T5/desktop-hardware/HP-how-to-says-second-hard-drive-can-be-added-to-P6-2026-but/TD-p/1070205

    Option: use the optical drive (5.25 ") with media Bay for. 5"HDD.

    Good luck.

  • Installation of a second HARD disk (slave drive) in an Inspiron 3646

    Can I add a second HDD (a slave drive) to an Inspiron 3646? It's a new I 3646, he replaced one consumed. I managed to save the hard drive and I would like to install it as a backup drive/extra storage.

    I can't find any technical information on the Dell website, no patterns or the FAQ.

    There are two bays 'open' on the rear of the case. It allows to install the reader?

    There is no cage attached to these berries or inside the case. Workaround is to make an external hard drive and plug in usb, but would rather put it in the box.

    Any suggestions? Thank you.

    sdxm

    Is it possible to remove the optical drive and replace it with a second hard drive?  This needs no additional hardware?  He would support a 3.5 or 2.5 "hard drive using this method?

    sdxm

    Yes, you could.

    There are two 5.25 "x 3.5" and 5.25 "x 2.5"Bay of converters available, probably 2.5 HD"would be the best fit, but you have to find a 5.25" virgins for the collar. [page 34].

    Bev.

Maybe you are looking for

  • Enjambements messages

    In recent updates of Skype, messages seem to go through if I'm in a quick conversation. For example: [15:26:10] BueNO: who[15:26:10] BueNO: wow[15: 26:11] Spangbab: what I had typed 'what' before my contact said, 'wow,' but after that she sent, he ma

  • Separated from 100 GB in 2x50GB - how to make a 100 GB HARD drive?

    Yesterday, I bought my Toshiba Satellite A100-225. This laptop has a 100 GB hard drive. But when I go to "EC/workstation" I see two hard drives. The C: and D: hard drive are two 50 GB. But I wish I had just a 100 GB. I heard a little more on the part

  • Re: Player SD - did not work with 8 GB card

    Hi, how can I read my Micro SD (with SD adapter) - (8 gb SDHC), my PC don't see this map. If I plug in my 2 GB SD micro is all ok. Is the problem with SDHC? (or 8 GB capacity?) Thank you [email protected]

  • Qosmio F20-137: WLan connection falls very quickly from 54mbs to 1mbs

    I connect to internet using my F20-137 via a linksys g wireless router. The router is in another room (25 feet and on two walls) for the laptop computer and the connection very quickly falls to 54mbs to 1mbs.Is it possible to maintain the speed of co

  • Windows Vista - configuration of the firewall

    "due to an unidentified problem windows cannot display windows firewall settings" (vista)? How can I fix.  Just finished a upadate before that happened :-( Thank you Glenn