Installation of application server

Hello

I am in the process of upgrading oracle forms 6i to form 10 g. I installed forms & Standalone (10.1.2.0.2) reports on a test server Services.

Should which version of windows server I use? Linux wouldn't be better?

10.1.2.0.2 is correct to install application server? I'd better go directly to the Server Application 11 g?

What version JDK should I install on the server? What JRE must be installed on the client computer?

Thank you
Faoilean.

Published by: faoilean on February 2, 2010 05:08

10.1.3 has forms and reports.
In regard to forms and reports, I daresay that 10.1.2 and 11 g is the same version, just a Java different container, with regard to the engine for services, so it could be the same work from 6 to 10 or 11.

As far as I have been unsing WebLogic, I can say is slightly more complex to use, because of the product have not been full integrated and administration is a bit more complex because of this.

But as I say before 10.1.2 is about to be out of support which could be my decition point, not to mention that they are the same.

Greetings.

Tags: Fusion Middleware

Similar Questions

  • Installation of application server disaster recovery

    Hi all
    I want to set up Guard app server to our production application server. Have you guys tried to install a guard, before... documents are quite misleading, especially when configuring the network settings like ip address, hostnames etc.

    Please could guys you know everything for installation PROTECTION r...
    I don't chose not a high availability and Repliation during the installation of OAS. Is it necessary to put in place the GUARD?
    My SV is 10g rel2 - 10.1.2.0.2

    All that is required is ASGuard 10.1.2.2 shall be installed in all oracle_homes instead of having OAS basic minimum version 10.1.2.0.2.

    Can I just go ahead with the ASGuard 10.1.2.2 installation in my app server 10.1.2.0.2 without having previously installed the high availability and replication? or it will give the error...

    Please help gurus...

    Edited by: anandk, 1 Sep 2009 12:17

    From my experience ASGuard is not widely used. It's much more common to use Data Guard directly (or CARS) to the IAS metadata repository, if of course this license implications (i.e. you must entirely DB Enterprise Edition license on both primary and standby for Data Guard).

  • Standard deployment failed installation foundation services deployed on the application server

    Good day ~

    Let me preface this with I have very limited exposure to Oracle products - thank you for your patience.

    I was busy learning, to install and prepare the Oracle EMP 11.1.2.3 components.

    Environment:

    New installation - I use Oracle Enterprise Performance Management System Standard Deployment Guide and the Guide of Installation and Configuration.

    Windows 2008 R2 - single server for all instances.

    SQL 2008 R2 - on a separate server.

    I started with the deployment guide Standard following all the steps for "installation of the Services of the Foundation" and at the end of the installation, it shows 'Impossible' for these red x products/task and status said Configuration is complete.

    The newspaper that I pointed at by using 'Help' EPM_ORACLE_INSTANCE/diagnostics/logs/config/configtool_summary.log says:

    (10 December 2013 12.48.49 PM): move the Foundation Hyperion [000 min 37sec] [PRE] - pre-configuration

    (10 December 2013 12.48.49 PM): pass [000 min 00 sec] [COM] Hyperion Foundation - the common settings

    (10 December 2013 12.49.48 PM): pass [000 min 58 sec] [COM] Hyperion Foundation - configure Oracle Configuration Manager

    (10 December 2013 12.49.52 PM): move the Foundation Hyperion [000 min 03sec] [DB] - database configuration

    (10 December 2013 12.50.01 PM): pass [000 min 04 sec] [PRE] Provider Services - pre-configuration

    (10 December 2013 12.55.40 PM): pass [005 min 38 sec] [PRE] Performance Management architect - pre-configuration

    (10 December 2013 12.55.41 PM): pass [000 min 00 sec] [REG] Performance Management architect - register with Shared Services

    (10 December 2013 12.55.44 PM): pass [000 min 03sec] [DB] Performance Management architect - database configuration

    (10 December 2013 12.56.15 PM): pass [000 min 30 sec] [VCC] Performance Management architect - configure the server of Dimension

    (10 December 2013 12.56.32 PM): pass [000 min 17 sec] [PRE] Essbase Studio - pre-configuration

    (10 December 2013 12.56.33 PM): pass [000 min 00 sec] [REG] Essbase Studio - register with Shared Services

    (10 December 2013 12.56.38 PM): pass [000 min 04 sec] [DB] Essbase Studio - database configuration

    (10 December 2013 12.56.38 PM): pass [000 min 00 sec] [PRE] calculation Manager - pre-configuration

    (10 December 2013 12.56.38 PM): pass [000 min 00 sec] [REG] calculation Manager - register with Shared Services

    (10 December 2013 12.56.39 PM): pass [000 min 00 sec] [DB] calculation Manager - database Configuration

    (10 December 2013 12.57.39 PM): pass [000 min 59 sec] [PRE] Reporting and analysis - pre-configuration

    (10 December 2013 12.57.40 PM): pass [000 min 00 sec] [REG] Reporting and analysis - register with Shared Services

    (10 December 2013 12.57.47 PM): pass [000 min 07 sec] [DB] Reporting and analysis - database configuration

    (10 December 2013 12.58.14 PM): pass [000 min 27 sec] [FSC] Reporting and analysis - configure the Services Framework

    (10 December 2013 12.58.15 PM): pass [000 min 00 sec] [RMI] Reporting and analysis - configure the Ports of RMI financial statement

    (10 December 2013 12.58.56 PM): failure [000 min 40 sec] [APP] Hyperion Foundation - deploy to the application server

    (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Provider Services - deploy to the application server

    (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] performance management architect - deploy to the application server

    (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] performance management architect - deploy to the application server

    (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] calculation Manager - deploy to the application server

    (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Reporting and analysis - deploy to the application server

    (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Reporting and analysis - deploy to the application server

    (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Workspace - deploy to the application server

    (10 December 2013 12.59.18 PM): pass [000 min 21 sec] [PRE] financial management - pre-configuration

    (10 December 2013 12.59.28 PM): move financial management [000 min 10 sec] [HDC] - DCOM configuration

    (10 December 2013 01.00.56 PM): move the Foundation Hyperion [001 min 27 sec] [WEB] - configure the Web server

    (10 December 2013 01.00.56 PM): pass [000 min 00 sec] [LWA] Hyperion Foundation - configure a logical address for Web Applications

    (10 December 2013 01.01.41 PM): iron loop [000 min 03sec] [BEW] on the task pane

    Newspapers are vague and I don't know where to go from here. Any ideas?

    Thank you in advance.

    Hello

    Please check if you are able to run Weblogic if you use as a Weblogic application server.

    Because it is the application server that establishes the communication between components.

    Thank you

    Amith

  • Deploy the ADF web application and forms and reports Services on the same installation of Weblogic Server

    I have forms and reports already installed on the Weblogic Server.

    Now, I want to install ADF web Application on the same server, Weblogic.

    Is it really possible to have forms & reports services and the application of the adf on the same installation of weblogic server?

    Please suggest / guide me on how to achieve the task above.

    Here are the details of my wls, forms and reports, and adf web application

    • WebLogic Server version 10.3.5
    • Forms & Reporst 11 GR 2
    • ADF web application developed using JDeveloper 11.1.2.4

    Thank you

    Deven


    Hello

    a few entries,

    https://forums.Oracle.com/thread/2433508

    https://forums.Oracle.com/message/11020401

  • installation of Peoplesoft using an application server and a database server

    IAM installing Peoplesoft on windows 2008R2 64-bit. I've had the Installer (combinations) of the matrix must be installed. I did a successful installation on the server test and its job very well. Now I have to make an installation on the production environment and in the production environment we use a 64-bit application (1 machine installed with windows 2008R2) server and a database server (1 machine installed with windows 2008R2) 64-bit words, we have two separate servers. So will there be additional tasks or settiings who have to do the installation. Thanks for giving me the details.

    As long as the basic connectivity works between servers, there is not particular to do things.
    If you do not plan to run components as CHRP (*) Peopletools on the database server, you will not need to install PeopleSoft (Peopletools nor) on the database server. In any case, it's much better to avoid the DBWizard of production database, manually creating db will be much closer to your expectations.

    Nicolas.

    Process Scheduler (*)

    Published by: Gasparotto N November 3, 2010 09:50

  • Installation of 10g application server.

    Hello
    I want to install 10g application server in my Linux Machine... I want to know if I can install this application server
    on RHEL5.

    Salvation;

    What is your exact version? Refer to the installation guide,

    http://www.Oracle.com/technetwork/indexes/documentation/index.html

    You can find which certified platform is from prior software request. You can also check this info from the matrix of certification that is available to
    http://www.Oracle.com/technology/support/MetaLink/index.html

    Respect of
    HELIOS

  • application server 10g installation

    Hello

    a bit of my environment

    EBS 11.5.10 + HP - UX 11.11 (application server test node)
    Oracle 10.2.0.4 + HP UX 11.13 (DB node)

    I recently applied patches to load on my PROD, because of which balancer

    My discoverer starts giving problems

    It is already at a level of old (4i)

    NW my quetsion is

    can I install existing Oracle BI on the application node and run discoverer independtly?

    Hello

    You, you can use another user for your new home of oracle, or you can use the Oracle user for the same installation. If you choose to use the same user, then you will need the following
    -all the uncommenct you approx. e.g. variable sid of user at home,.
    -you will need to make een scripts to aliases that will mention the ORACLE_HOME right you willneed. ex if you need to go to the EBS, DB, or Disco, you just need to say to the ebs, db or Disco. You can switch automatically. the ORACLE_HOME right.
    If you need dample of these aliases just let me know.

    Have a great day,
    Respectfully,.
    Hamdy

  • The 10g application server installation

    Hello

    I have Windows 2003 is installed on a virtual machine, I also have Oracle Database 10g release 2 (10.2.0.1.0) installed and configured, I need to install Oracle Application server release 2 (10.1.2) to the same server, is this applicaple?

    Also although the application server will install a database, this database will use the same port 1521. is it possible to change the port. I tried that to change the listner.ora, but it does not work for me.

    Thank you for helping me.

    It is possible, in the DB change listener.ora the listener from 1521 to 1522. And when you start the installation of the OAS 10.1.2 consider using another Oracle Home thus Instance name so you don'r something rewrite by misstake.

    greetings.

  • Installation of Oracle Weblogic Application Server distributed environment

    Hello

    It's like when we install in distributed environment (Windows and Linux). Oracle Weblogic application server is installed automatically on all servers.

    Or we can install on a server and on other servers when you perform the configuration that we can point to the first application server configuration server.

    What are the benefits of installing Oracle Weblogic server in every server and Weblogic server in single server.

    In what scenario we must install and create the new instance of the oracle weblogic application and configure products in each server.


    Please notify.

    Oracle Weblogic application server is installed automatically on all servers.

    It gets only installed, but you need to configure/deploy WebLogic admin server on 1 server. namely the Foundation Server.

    WebLogic is installed on each server, because the common component of EMP products rely on components of WebLogic.

    Kind regards

    Santy

  • Oracle 10g se & 10g application server installation conflict port 1521

    Hello

    I use Windows server 2003 and I had previously installed Oracle 10 g Standard Edition for Hyperion 11.1.1.3.

    now, I want to install Oracle 10 g application server.

    But when I tried to install Oracle 10 g application server, sound suspends with the oracle 10g database server in port 1521.

    Is it possible to install Oracle 10 g Standard Edition and Oracle 10g application server in Windows server 2003?

    Help please.

    Hervé M

    Yes, it is possible to make them together.
    In cases where the port 1521 is busy, try 1522.

    AMN

  • Misfortunes of OBIEE on CentOS Linux installation with the application server

    So I'm under CentOS 5 with 10 gr 2 10.2.0.4 and Oracle application server 10.1.3.1. The application server seems to be running, that I can open an Informatica repository and access server: 7777 / em and do some configurations.

    I installed OBIEE and BI and presentation servers claim to have started (log files not referenced the .sh scripts show no error)

    However, when I open the url http://server/analytics, I get a page not found error. According to the section application of MBeans, the RPC port is 9703. When I go to http://server:9703 / analytical, the screen just hangs, until I hit Cancel on my browser. When I hit Cancel, the file NQServer.log shows

    [nQSError: 12002] Error in communication on the socket call = send: (number = 9) bad file descriptor

    Any advice on what to watch next? I feel that I'm missing something really simple

    Thank you
    James

    You can also try to deploy the EAR of WAR files / yourself, they are copied by Setup OBIEE under ./OracleBI/web /.

  • LabView 2013 or 2014 Web Application Server does not start.

    I have a request that I built in 2013 of LabView that uses the Web application server OR. The application worked until end November 2014 when the Web in LabView 2013 application server has stopped working. Specifically, 2 and 1) NI NI Application Server Web services) Web Server system both were running, but I was unable to access web pages that I created earlier, or I could access the Configuration Web page OR localhost:3582. In addition, the button "Configure Web Application Server" under "Options/Web Server" is gray. Makes me think that web services NOR did not start successfully upward. Complete a repair facility OR to the LabView 2013 install did not help either.

    Since the opening of a service ticket with NEITHER, I've now deleted and reinstalled the 2013 LabView and LabView 2014 each with the latest patches. But the problem persists.

    The ticket OR for that matter now rests with RnD, so I'm tender hand to the community OR to see if anyone sees something similar? Or has any ideas to try?

    Some additional notes:

    (1) contrary to LabView LabView 2013 2014 no web services NOR would begin, based on a new for 2014 dependence on the Authentication Service of NOR. In 2014 this service does not either.

    (2) when I uninstall 2014 and re-install 2013, chess happens again (as above).

    (3) my system runs Win 7 Pro x 64 with 8 GB of RAM.

    (4) I have McAfee virus scanner/firewall. I have disabled and even uninstalled without correcting the problems.

    At this point any ideas to try would be greatly appreciated, because I can't wipe my OS and start over.

    Thank you

    * Update *.

    I finally found a solution to this problem. The solution is the following:

    1. Delete the two files "C:\ProgramData\National Instruments\NIAuth"

      • commitmark.1
      • Registry.bin
    2. Restart the OS and re-launching of LabView.

    On the next reboot, LabView recreates these two files and the Web services OR Windows services start normally. Once NI WebService which works normally.

    I'm assuming that one or both of these files has become corrupted at some point, that has kept the WebServices OR start properly. But as none of the services OR created an error event Windows for that matter, I stayed to search for the solution. And since the installer NOR has not remove or repair any of these files, the question continues to no matter how many times I have re-installed LabView on my system.

  • ISE 2.0 Application Server initializing state

    Hi team,

    I have update the ISE of 1.3 to 2.0 version. After the upgrade of the ISE to 2.0, that application server service is initializing state.

    Tried the steps below:

    1. application stop ise

    2. application start ise

    3 reload.

    4. install the latest patch. Patch 3.

    But, no luck

    You all sharing the output of the status of the request

    # sh application status ise/Admin

    ISE NAME STATUS PROCESS PROCESS ID
    --------------------------------------------------------------------
    Running 3477 database listener
    Server database running 39 PROCESS
    Initializing application server
    Database of Profiler running 4497
    Connector AD running 6426
    Database Session M & T performer 3007
    M & T Log Collector executes 6314
    6262 clocked M & T journal
    6223 performer certificate authority service
    SXP Engine Service disabled
    pxGrid Infrastructure Service disabled
    pxGrid Publisher Subscriber Service disabled
    pxGrid Manager of disabled connection
    pxGrid disabled controller
    Identity mapping service disabled

    Version information:

    Admin # sh ver

    Deploying applications engine Cisco OS version: 2.3
    ADE-OS Build Version: 2.3.0.187
    ADE-OS system architecture: x86_64

    Copyright (c) 2005-2014 by Cisco Systems, Inc.
    All rights reserved.
    HostName:

    Version information for the installed applications
    ---------------------------------------------

    Cisco Identity Services engine
    ---------------------------------------------
    Version: 2.0.0.306
    Build Date: Thu Oct 8 13:25:23 2015
    Installation date: Tue may 10 18:32:37 2016

    Cisco Identity Services engine Patch
    ---------------------------------------------
    Version: 3
    Installation date: Wed May 11 14:17:51 2016

    Any help on the matter would be appreciated.

    Urgent!

    Thank you... Laxmi

    How long wait until she finishes, it may take quite a long time, anything from 10-30 minutes in my experience

  • Print file .rep directly on the printer, configure the application server

    Hello

    I spent several hours on this forum and unfortunately not found a solution yet so hoping someone has an idea that can help me solve this problem.

    Using forms/States of oracle 11g with a linux application server, we develop on windows machines. Printing reports using compiled .rep files.

    We have a network printer sharing (HP) that is configured on the application server, and we can print on the correct printer directly on the application server.

    Problem is when I try to print a report when executing the forms of oracle on my machine of development directly to the printer.

    I tried:

    SET_REPORT_OBJECT_PROPERTY (l_repid, report_destype, printer);

    SET_REPORT_OBJECT_PROPERTY (l_repid, report_desname, 'APPSERVER_PRINTER_NAME');

    When I put the report_desformat in 'pdf' format I can see the reports to enter the print queue, but they do not reach a 'State' order ' print file empty. "

    When I remove report_desformat, he sends in eps and as I understand it, it prints, but with bad formatting (I work remotely and run by what their colleagues say.)

    CUPS 1.4.2 reference printer queue tab.

    The report generates in the browser if I change the destype to produce and use web_show_document to display it as we usually do.


    I understand there are solutions using a java bean or involving the installation of the software on the client computer, but my employer is unwilling to go to that direction. We have only a handful of reports that require the ability to print directly to the printer.


    That someone has an idea of what the problem might be or help provide additional steps, I can take to solve problems? I have no idea how to do to configure printers, our IT Department managed this and they say, it's good so I don't know if there is a problem with what I'm doing or there was something installation related rate with this network printer.


    Thanks in advanced for any assistance!

    I have given up trying to use a report_desformat of pdf and paste it with the default value of the eps, after review, it seems pretty close match that generates pdf format and despite the fact that the queue on the application server throws a misprint even with the eps format it actually always draws for the good enough for now. Would be nice to know what happened here, but the problem has been resolved.

  • webutil read file function finds the file on the application server

    Hello

    I want to select and read a file (possibly .pdf) and save it to the database.

    To achieve this, I:

    1) created a table, deltia (key primary aa, varchar2, blob, other columns... image_blob, filename)

    (2) created a block form of database based on the deltia table. The element of the "image_blob" column type is image

    and the image format is "tiff".

    (3) wrote the following piece of code to perform the selection of local file (successfully)

    Select the FUNCTION (i_FileFiltre IN Varchar2 default vDefFileExt)

    RETURN VARCHAR2

    IS

    vPath Varchar2 (128);

    vFileName Varchar2 (256);

    vFileFiltre Varchar2 (200): = i_FileFiltre;

    Begin

    vPath: = CLIENT_WIN_API_ENVIRONMENT. Get_Temp_Directory;

    vFileName: = WEBUTIL_FILE. FILE_OPEN_DIALOG

    (

    vPath,

    '',

    vFileFiltre,

    "Select the file to download.

    ) ;

    Return vFileName;

    END selection;

    The form above function call is:

    Declare

    vFileName Varchar2 (200);

    Begin

    vFileName: = PKG_File_Ops.Selection;

    If vFileName is not null then

    : eq_deltia_metakinhshs. Filename: = vFileName;

    End if;

    End;

    (4) wrote the piece of code to the game/place the file selected in the form element "image_blob", as following:

    client_image.read_image_file (: eq_deltia_metakinhshs.filename,)

    substr (: eq_deltia_metakinhshs.filename, instr (: eq_deltia_metakinhshs.filename,-1)).

    "eq_deltia_metakinhshs.deltio_image");

    The call to the packaged procedure client_image.read_image_file does not work. It returns error

    "47109 - cannot locate the/u01/oracle/temp /... image file"

    In other words, the system will search to read the selected file locally on the server App.

    What can be the cause of this?

    With regard to the content of the webutil.cfg of the App Server. :

    # ---------------------------------------------------------------------------

    # webutil.cfg - WebUtil default configuration file

    # ---------------------------------------------------------------------------

    # This file contains all the configuration settings for webutil. These are some

    # divided according to the following sections:

    # 1. Logging options

    # 2. Installation options

    # 3. Upload a file and download Options

    # 1. Logging options side server for recording the log messages and errors

    # You must set logging.enabled to true to allow registration of mid-range. Without this

    logging of mid-range # will not be any PL/SQL or URL options

    # are provided to turn it on. Once recording is activated the other settings are

    # in-game.

    #

    # Details

    # -------

    # logging.file: sets the file name and location of the log file.

    # Note that WebUtil does no management of the log file. You can

    # need to manually clean this file at any time.

    # logging.enabled: can be TRUE or FALSE

    # logging.errorsonly: can be TRUE or FALSE. Parameter True will ensure that

    # only errors and the normal information log messages

    # are written to the log file. It would be for the use of the product,

    # normally be set to TRUE

    # logging.connections: can be TRUE or FALSE. Setting to true causes each

    connection from a client using WebUtil for write in #.

    # the log that it puts in place.

    Logging.file =

    Logging.Enabled = False

    Logging.ErrorsOnly = false

    Logging.Connections = false

    # 2. Installation options

    # WebUtil needs to download files on the client to perform

    # some operations such as OLE integration or access to the registry. These files

    # are downloaded on the client when webutil is run for the first time.

    # Subsequent executions will use the dll in the cache. Define the location of the

    # These files on the server and the location on the client.

    #

    # Here's a chart that shows numeric constants and their meanings. They

    # are used in configurations of installation options. These constants are defined

    # in WEBUTIL_CORE package spec. Note that the Processor Architecture of the Client operating system

    # is generally the architecture of the JAVA virtual machine that runs on the client,

    # not necessarily even the real client architecture of BONE.

    #

    # < Os - > Client OS family < arch - > processor for the Client operating system Architecture

    # 0-0 - 32-bit Windows

    # 1 Linux 1-64-bit architecture

    # 2 SOLARIS

    # 3 HP

    # 4 AIX

    # 5 mac

    # 9 unknown

    #

    # < Package > - package name

    # 7 WEBUTIL_OLE2

    # 9 WEBUTIL_C_API

    # We do not yet have downloads for other packages. If you need, refer

    # Spec package WEBUTIL_CORE for constants of other packages

    #

    # Details

    # -------

    # NOTE: For all < arch > parameters field is optional. Without this field, the

    # setting will apply to the client 32-bit and 64-bit OS (FMV)

    architectures of #.

    #

    # install.syslib.location. < os >. < arch >:

    # The virtual path of the directory containing the webutil library files the

    server-side of #. This must be an absolute URL or a relative URL

    # for the documentbase.

    # NOTE: < os > field is optional for this parameter. In the absence of a framework

    # which has the client OS and ARCH, it will use

    # install.syslib.location. < arch > cannot be specified if < os > is omitted.

    #

    # install.syslib.location.client. < os >. < arch >:

    # The path to the directory on the client machine where the webutil library

    # files will be downloaded. This must be an absolute path or a path

    # which is the profile of the client user or at HOME. Directory will be created

    # If necessary as well as other parent directories. If the path is

    # do not set, it will be treated as a special case where the libraries will be

    # downloaded to the client JRE\bin (windows) or JRE/lib (unix). If this

    # Directory is changed, all libraries will be redownloaded again.

    #

    # Please keep in mind that other forms server may also have a similar

    the location of # and so libraries could be overwritten even when

    # client running webutil server of different forms. It is therefore

    # advised that the location has a subdirectory that may be unique to your

    # Server, such as the name of the host server. You could use $(SERVERHOST) in the

    # location. This string will be replaced with the actual hostname of the server

    #

    # install.syslib. < os >. < arch >. < package >. < n >:

    # The names of the libraries required for the particular webutil beans. The

    # format of it's name. size | version | showDownloadDialog. Several libraries

    # can be downloaded per package. But make sure the values < n >

    # row and start at 1 for a given operating system, arch and package together.

    install.syslib.Location=/webutil

    install.syslib.Location.0.0=/webutil/Win32

    install.syslib.Location.0.1=/webutil/Win64

    # Add/Edit the following if you want to specify a different location client

    # where syslib libraries.

    # Format:

    # install.syslib.location.client. < os >. < arch > = < location >

    \win32 install.syslib.Location.client.0.0=webutil\syslib\$ (SERVERHOST)

    \win64 install.syslib.Location.client.0.1=webutil\syslib\$ (SERVERHOST)

    # Change the size and the version if necessary, such as when the upgrade of the library.

    # Normally this is not necessary since most of these libraries are equipped

    # settle. Jacob does not however come with installation

    # Format:

    # install.syslib. < os >. < arch >. < package >. < n > = name | size | version | showDownloadDialog

    1.14.3 - install.syslib.0.0.7.1 = Jacob - x 86 DLL | 102400 | 1.14.3 | true

    1.14.3 - install.syslib.0.1.7.1 = Jacob - x 64 .dll | 117760 | 1.14.3 | true

    install.syslib.0.0.9.1 = JNIsharedstubs.dll | 45056 | 1.0: true

    install.syslib.0.1.9.1 = JNIsharedstubs.dll | 58368 | 1.0: true

    install.syslib.0.0.9.2 = d2kwut60.dll | 81920 | 1.0: true

    install.syslib.0.1.9.2 = d2kwut60.dll | 102400 | 1.0: true

    # You can also add your own libraries here, for example

    #install.syslib.0.0.user.1 = testwebutil.dll | 204872 | 1.0: true

    #install.syslib.0.0.user.1 = ffisamp.dll | 40960 | 1.0: true

    #install.syslib.0.1.user.1 = ffisamp.dll | 35328 | 1.0: true

    # 3. Download / upload options

    # For file upload and download options, you can set the default locations

    # on the server that webutil can use as a work space. Optionally, you can pass

    off # upload and download

    #

    # Details

    # -------

    # transfer.database.enabled: can be TRUE or FALSE - allows you to activate or

    # disable upload and download of data

    #                                server.

    # transfer.appsrv.enabled: can be TRUE or FALSE - allows you to activate or

    # disable the upload and download from the

    application server #.

    # transfer.appsrv.workAreaRoot: the root of the location in which can WebUtil

    # store temporary files uploaded by the client.

    # If no location is specified, application server

    # user_home/temp will be assumed.

    # This place is always readable and accessible writable

    # No matter the parameters of

    # transfer.appsrv. * are. This parameter is

    # If you need side customer

    # READ/WRITE_IMAGE_FILE procedures.

    # transfer.appsrv.accessControl:Can be TRUE or FALSE - allows you to specify

    # that loads and downloads can occur

    # the directories named in the

    # transfer.appsrv.read.n and

    entries transfer.appsrv.write.n # and their

    subdirectories #. If this parameter is set to FALSE,

    # transfers can happen anywhere.

    # transfer.appsrv.read. < n >: list of directory names that downloads can read

    #                                from.

    # transfer.appsrv.write. < n >: list of directory names that mail can write

    #                                to.

    #NOTE: by default, the file transfer is disabled by security measure

    Transfer.Database.Enabled = True

    Transfer.appsrv.Enabled = True

    transfer.appsrv.workAreaRoot =

    transfer.appsrv.accessControl = FALSE

    #List transfer.appsrv.read. < n > directories

    Transfer.appsrv.Read.1=c:\temp

    #List transfer.appsrv.write. < n > directories

    Transfer.appsrv.Write.1=c:\temp

    # 4. Others

    # Details

    # -------

    # BlockAllowHeartBeat: Continue the heart beat communication with the

    # Server when set to TRUE. By default, the value is

    # the value False. If set to False, there is no heart

    # fight mode blocking communication.

    BlockAllowHeartBeat = False

    Notes:

    The database version is 11g v.2

    Forms services version is 11g v.2

    The webutil has been installed and configured (I have done a project that requires reading a

    saved locally excel file - using webutil_ole2.)

    I didn't notice an error in the Java console.

    Thank you

    SIM

    This error indicates that your server is a unix platform: 47109-cannot locate image file/u01/oracle/temp /


    If it is correct, then your webutil.cfg is not been set correctly.  Entries for transfer.appsrv are in reference to the appsrv and not the client.  So you currently C:\temp which is a directory of Windows and not Unix.

    (2) Transfer.appsrv.Read.1 =c:\temp. It is already set.

    3) Transfer.appsrv.Write.1=c:\temp. It is already set.

Maybe you are looking for

  • Satellite A200 - error when running Recovery Wizard

    Hi all I'm having a problem on the wizard of recovery on my laptop A200 (OS: Vista). I have an error message - "error: Create Partition 08-104 b - 0000 failed. I tried all the solutions provide the FAQ page or "how to". Like http://www.mytoshiba.com.

  • Problem with CD

    I inserted a new CD in my PC and it came properly.  I then copied to my hard drive but could not bring this copy. I inserted the new CD in my PC, but this time it would not come. I got the new CD to a second PC and it came properly.  Then I took an o

  • Architecture?

    If I understand it correctly, an application could be either run completely from a web site or be "packed" to run completely independent. I got the idea to bring out the best of both worlds, but I'm starting to think that's not possible. My idea was

  • Because crude oil is no longer supported, can I return my photoshop for a refund? [LOCKED]

    I use CS6, the latest version of Photoshop for sale.  But I now own a 1 d x mk ii camera, which is not supported.  Since Adobe has announced that they have no intention to provide an update to this, is there a way I can get a refund for the abandoned

  • Creative Suite Design Standard 6 for Mac

    I bought CS Design Standard 6 victory two years ago. Now, I would buy a Mac. How can I get the same Creative Suite for Mac, or can I get a new serial number for Mac when I pay an additional amount?