Installation of AutoCAD 2009 on Windows 7.

Similar Questions

• Vista Business 64-Bit with AutoCAD 2009 does not seem to use all 8 GB of RAM available.

  A workstation newly built (S5000XVN Intel / Xeon / 8 GB RAM / 2 GB RAM video) with Windows Vista Business 64-bit is used with AutoCAD 2009 (64-bit).  The workstation hangs under stress, apparently because not enough RAM is available.  ("Stress" is "Turning entirely made of a certain complexity 3D drawings")

  The Task Manager / Performance tab indicates never to use RAM above about 3.25 GB, even if ten or more concurrent applications are loaded, including IE 8 (6 graphically heavy windows) and AutoCAD with 6 or more complex drawings open at the same time.

  There are two issues, I think:
  1. in the event that a busy workstation indicate use RAM above the 32-old bit of 3.2 GB limit?
  2 are there MS Windows Vista settings that are necessary to ensure the use of RAM available?

  Thanks in advance.

  Thanks for the reply.

  I studied the installation of AutoCAD 2009.  It's actually the 64-bit version that is installed, and the Task Manager reports it as a 64-bit application when it runs.  (In other words, it is not marked as a 32 bit application.)

  I must admit that I no longer believe that the machine is running out of resources or do not use all the resources available to it.  We tested the machine by throwing 18 complex, fully rendering the 3D drawings within the Academy, in addition to two cases of IE 8, three instances of Explorer Windows and MS Windows Mail.  Use of the RAM did climb, reaching finally the 4.06 GB, clearly indicating that the 32-bit 3.2 GB limit has been exceeded.  It seems that just drawings don't take up that much RAM.  BTW, there was no increase in the paging activity that I could see.

  However, the application does not seem to be frozen or looping when the client attempted to turn one of the drawings.  The CPU on the two wires (Xeon processor) usage increased to 55% and remained there. the State of the process, as reported by the task manager went to "Not responding" and stayed there; and the display of the image froze on an empty workspace, with a three seconds flash drawing on every 20 seconds.

  So: It now seems that there is a problem with AutoCAD, not a Vista problem.  I would appreciate comments, however, if you think that this analysis is wrong, incomplete or based on wrong assumptions.

  Thanks for your help.

• How to install AutoCAD 2007 on Windows 7?

  I recently bought a new system to upgrade to 64-bit with Windows 7 (home edition).  I would like to install an AutoCAD program on the new computer. Preference of AutoCAD 2007 ((j'ai les versions R14 et 2007))

  I do not own or operate a business, and my use of AutoCAD does not generate income, so it is not profitable to run out and buy a new copy of AutoCAD, whenever it is updated (GETS expensive).  Running out and purchase Autodesk - AutoCAD 2010 is therefore not an option.

  So what can I do to circulate and operate one of these two versions of AutoCAD on this new system?  ((I really need to do market.)) < pulls="" hair=""> > I thought conversion on Windows 7 XP would be GREAT... but NOW I'm starting to regret!

  Hello phnx428,

  Thanks for posting on the Microsoft answers Forum.

  The site of AutoCad:
  Both 32-bit and 64-bit AutoCAD® and AutoCAD LT® 2010 2010 are compatible and supported on Microsoft Windows® 7.

  Autodesk does not officially support the versions of AutoCAD and AutoCAD LT 2009 and older on Windows 7. If you choose to run older versions of AutoCAD on the Windows 7 operating system, you can opt to use the Windows compatibility mode.

  I would try to install in Compatibility Mode for XP or Vista. If you have an older application for Windows XP or Vista, which does not work in Windows 7, you can make it work properly by running the program in compatibility mode.

  1. to start, find the application or the shortcut which is the cause of the problem, and then right-click on it and select Properties.
  2. then, select compatibility in the menu tabs at the top of the properties page:
  3. now check the box run this program in compatibility mode "dethrone" and select the operating system you want to emulate. For most applications, this will be Windows XP SP2. Once you are finished, click OK.
  4. When you then run the application, it must run under compatibility using the OS mode you have selected. If it runs properly, try another selection of OS in step 3, and then try again.

  I hope that this will help solve your problem. If this isn't the case, you will need to communicate with AutoCad to see if there is no work around.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to import the Image into AutoCAD 2009 "file."

  Asalamo-Aliqum!

  I just have a question about the picture of my Autocad file when I open autocad 2009 and insert the image of 'The Image' it shows a jpeg file in adialog box. But when I get my Google map image using my tool I get a file, it can not show on my image dialog box. How do I move this file in my AutoCAD2009.

  

  When I open this file in the pictures Windows viewers. I'll get a picture.

  

  Thank you

  Hi Malik.

  The question you posted would be better suited in support of Autocad you are trying to import the Image of Autocad 2009.
  http://forums.Autodesk.com/T5/AutoCAD/CT-p/8

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• Can I transfer my old regsitry to a new installation of clean boot of windows 7

  Can I transfer my old register to a new installation of clean boot of windows 7?  If so, how this is done?  Without a transfer, it is necessary to reinstall all my software and it is very time consuming.

  You will not be able to transfer all the registry settings. Unfortunately, you will need to reinstall everything.

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• Windows Setup is unable to find a place to store temporary installation files. To install windows, make sure that a partition on your startup disk has at least 686 MB of free space

  Current operating system: Win XP

  New version: Win 7 Home premium downloaded from digitalriver (student version)
  The download went well and expanded on in the expandedSetup folder. When I click on the button 'Install now' on the configuration screen, it displays error
  "Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your startup disk has at least 686 MB of free space. »
  The unusual thing only that I have in this facility, it is that I "shrunk" the volume existing XP windows C: 228 GB to 150 GB to make room for the new partition W: for windows 7.
  Here is the my drive details
  Total
  Disk 0
  Letter of free space size
  c: 150 GB GB 48.3
  W: go-go 78.0 78.1
  I: 54.7 47 MB MB (seems to be the DELL diagnostics dell partition)
  J: 4.63 GB 959 MB (seems to be the DELL partition with the original copy of OS)
  Disc 1
  free space of letter size
  M: g 78.1 29.8 GB
  N: 39.0 go-go 22.8
  X: 21.8 31.7 go-go
  Thank you
  Muthu
  I found the fix - made a bootable disc from the "expandedSetup" directory and booted from the disc. Look for the startup disk process in the solution of this tread

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/aedb1245-f8f9-42EC-9A0C-1aa932363bbb

• Can I make a new installation on new hardware with Windows 8 Pro OEM?

  But seriously, I have a new MB that I need to use as there is a problem with my Chipet a PCB there is some problem with power. I have not really but it's a mess now of working with and I bought a copy of Windows 8 pro OEM System builder and I made sure that if reason I could use the liscence to win 8 OEm on new hardware store and this Orginal Statemant of Microsoft saying it's fine as long as it's only on a PC. Although I found many threads say otherwise and win 8 OEM is not transferable, as are all the Windows OEM. So I ask you once again so I can have a PC is able to install on new hardware?

  Original title: fishing trolling warn... Can I make a new installation on new hardware with Windows 8 Pro OEM?

  Windows 8 Pro OEM System Builder has rights of transfer, then Yes, you can move it to a new computer or the motherboard.

  http://personaluselicense.windows.com/en-US/default.aspx,

  "Can I transfer the software to another computer or user?

  You can transfer the software to another computer owned by you. (You can also transfer the software (as well as the license) to a computer that belonged to someone else if one) you are the first user under the software license and b) of the new user accepts the terms of this agreement. To make a transfer, you must transfer the original media, the certificate of authenticity, the product key and the proof of purchase directly to the other person, without keeping all copies of the software. You can use the backup copy that we do or the media the software provided on transfer the software. Whenever you transfer the software to a new computer, you must remove the software from the previous computer. You can not transfer the software to share licenses between computers. You can transfer the Get Genuine Windows, Pack Pro or Media Center Pack software only in combination with the licensed computer. »

• I have problems with the installation of adobe reader for windows 10

  I can't install adobe reader for windows 10

  Hi magda, m

  Please see the troubleshooting provided in this KB doc steps: installation troubleshooting Adobe Acrobat Reader | Windows

  Check if that helps.

  Kind regards

  Meenakshi

• ERROR: This Setup program does not support installation on a 64-bit Windows

  I just bought the first items 14 and trided to install it, but got: "ERROR: this Setup program does not support installation on a 64-bit Windows operating system." Please download the 64-bit version of first Elements". So, I know that I must have downloaded the wrong version. (We are still in 1995, I thought that these applications have been more intelligent these days...) SO, how can I do now? Is it possible to download the right version and use the same license number? Need help how to proceed!

  You can download the 64-bit link version:

  Download first Elements | 10, 12, 14, 11, 13

• I purchased Adobe Premiere Pro CS4 in 2009 for Windows, but now I use an apple computer. Please can you lucky my serial number of the version of windows in a Mac version?

  I purchased Adobe Premiere Pro CS4 in 2009 for Windows, but now I use an apple computer. Please can you lucky my serial number of the version of windows in a Mac version?

  First of all, this isn't Adobe.  This is a user to user forum.  We are customers like you, with the exception of a few employees from Adobe that are similar to.

  Second, Adobe doesn't support a change of platform (operating system) for current software versions, although you can switch to another platform:

  Exchange a product for a different version of the language or platform

• during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  I just had to go to the directory "Win Support files" and open the implementation file. Now it's working.

• Flash Player 18 HA installation will not accomplish on Windows XP 32-bit.

  I've always been able to update Flash player, including the other 18 version, but the version 18 HA installation hangs and crashes on Windows XP 32-bit. An explanation or a way to fix?

  Hi jerryd52418238

  It is an error with the installation online program and I have forwarded this to the team that manages the installation program online for further investigation.

  In the meantime, please use the installer in offline mode, posted at the bottom of the problems Installation | Flash Player | Windows page in the section "problems".

  --

  Maria

• Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

  (Info for PC vs Mac: https://forums.adobe.com/thread/1658959?sr=inbox&ru=3738552)