Installation of ColdFusion on (k) Ubuntu 12.10

Similar Questions

• Error on the 100 + entered form after installation of ColdFusion Security Hotfix APSB12-06

  I recently installed ColdFusion Security Hotfix APSB12-06 (http://helpx.adobe.com/coldfusion/kb/coldfusion-security-hotfix.html).

  After installation, the shapes that have more than 100 entries produce a 500 - internal server error.

  I just noticed this note in the instructions for the fix:

  • Customers who want to change the postParameterLimit, go to the {ColdFusion-Home} / lib for Server installation or {ColdFusion-home} / WEB-INF/cfusion/lib multiserver or J2EE installation. Open the neo - runtime.xml file, after the line

  1

  "100.0"

  Add the below line and you can change the desired number 100.

  1

  "100.0"

  I'll try that

• installation of coldfusion on tomcat 5.5

  Hello
  I'm doing a project involving coldfusion and j2ee (what a good idea, btw?), and I met some problems on installation of coldfusion.
  
  I installed apache (tested and works well with a j2ee project), jdk 1.5.0.6 - tested with a few projects and works very well and a plugin for eclipse (cfeclipse I think)
  then I installed "coldfusion-702 - win.exe" (downloaded from macromedia, developer version - it says it is supposed to work with j2ee).
  
  the installer has 2 directories: CFusionMX7 and ColdFusionSearchService. in the first, there are "cfusion.war" file that I copied in the directory webapps of tomcat (as well as the "CFIDE.war" file).
  
  then I started the apache server and it created (;)) apart a couple of directories in the webapps directory: CFIDE and cfusion (which contain more files and subdirectories))
  
  Next, I created the file "setenv.bat", by following the instructions on this site (which contains the paths to the directories in coldfusion, access roads written here all corect) and place in the directory 'bin' of tomcat (next to the file "tomcat5.exe"). restarted the server, etc etc.
  (set JAVA_HOME = C:\Program Files\Java\jdk1.5.0_06\
  Set CF_HOME = C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\cfusion\
  put CF_WEB_INF=%CF_HOME%/WEB-INF) etc...
  
  My question is: what should I do next to make it work? :)
  
  I started tomcat and I tried typing " http://127.0.0.1:8080/cfusion/CFIDE/administrator / ", but I get the "Cannot display page" error
  Help.

  Nevermind, I got it.
  the tutorial on the macromedia site is outdated. This is were you can find correct information:
  http://www.librarywebchic.NET/WordPress/2005/11/18/Tomcat-and-ColdFusion/
  

• Installation of ColdFusion on Linux VMWare session

  Has anyone had a successful installation of coldfusion mx7.0.1 meeting of vmware linux? I found a problem on this site for coldfusion installed in a vmware windows session. I tried the work around by using a silent installation and still had installation problems.
  ( http://www.macromedia.com/cfusion/knowledgebase/index.cfm?event=view & id = KC.f7447c40 & extid = f7447c40 & dialogid = 117420173 & iterationID = 1 & sessionID = 4830838986d87c681272, & stateID = 1 + 0 + 11739 4817 & mode = advanced)
  
  (do a find for VMWARE)
  
  I know C++ compatibility issues, and I know that I have additional libraries installed. (I don't think that is the question for this installation, in any case)
  
  I get the error listed in the Setup log file indicating:
  '/tmp/0124.tmp/ant_bin_dir.zip '.
  Status: ERROR
  Additional notes: ERROR - problems wit the Extender of the type Z_/installers/CustomCode/includes/ant_bin_dir.zip's. "He said: error in opening zip file.
  
  I zip and unzip in the path and callable. There are a lot more error thereafter, but I think it's because files are missing in zip archive. Any ideas?
  
  Oh, I also tried to download this file 3 different times. I had an original installation file that I used before without any problem. I also downloaded it twice just to make sure I didn't have a corrupted file.
  
  (Edit)
  
  I made the request to record the temp directory, so I could see what he was working with. I went through the decompression of the files I could find and found that Resource1.zip has problems.
  
  "Signature of end-possibili-directory not found. This file is not a zip file, or it is a drive from one archive in several part. In the latter case you Central Directory zipfile comment is on the last drive of this archive.
  unzip: cannot find zipfile directory in one of the Resource1.zip or Resource1.zip.zip and cannot find Resource1.zip.zip, period. »
  
  Maybe its a problem with this file in the installer?

  OK, I played around with it some more but I thought that I have here documents for later use, if someone has the same problem.

  I downloaded many times coldfusion linux installation.

  I'll implement this laptop so I can program so that not even connected to the network. I bought a copy of CF7 earlier and downloaded the file.

  I think that the download of "Developer" from the download section of adobe (macromedia) may be bad. That, or by downloading it 4 times on this computer all failed in the process.

  I remembered that I still had the coldfusion linux install file on my Web server, so I downloaded the file to my session for laptop computer to vmware using sftp.

  I should also mention that the md5 sums did NOT match those shown in the download section. In fact, I couldn't get one to match at all. I don't have a sum on the first two downloads, so I don't know if they match or not.

  Anyway, I knew that the cold fusion on my web server setup file worked, so I copied that and ran the installation using the installation in silent mode. I don't know if it would work with the installation in normal or not; I have not tried.

  So, if you encounter this error, it's probably the download. Try to download the test the other section (can't remember what his name). You can install either of those in developer mode.

• Installation of ColdFusion on Windows 10

  Someone at - it installed with success CF11 (or any other version) on Windows 10 machine?

  I installed IIS, ISAPI, ASP.NET and CGI Extensions.  The CF11 Installer seems to work well and got to the point where it would normally launch CF Admin and came up with a 404 error.  I run the Web Server Configuration tool, and it appears a warning box that says "Version 10.0 installed. Versions supported are 4.x, 5.x, 6.x, 7.x, 8.x"after that I chose all IIS sites. Also, it isn't a record numbered under c:\ColdFusion11\config\wsconfig\ as it should, there is no mappings for the CF file extensions in IIS.

  You'd think that adobe would be all this because many developers will soon move to Windows 10.

  This problem has been fixed. The latest version of CF 10 / 11 update added 10 Windows / IIS 10 compatibility.

  Updating ColdFusion 11 7

  Updating ColdFusion 10 18

• Questions about the installation of ColdFusion 9.0.2 version of existing in version 9.0.1

  Hello

  I'm currently running ColdFusion 9.0.1 enterprise edition and plan to upgrade to version 9.0.2 version. I understand that this requires uninstalling existing 9.0.1 and perform a new installation of version 9.0.2 version. My concerns are below:

  1. for the installation of the 9.0.2 version the 9.0.2 installer (demo / trial version) must be downloaded and the existing serial number (used in version 9.0.1) can be given during installation to convert it in fully registered mode - please correct me if my interpretation is incorrect here. My question is will the existing serial key (as shown in the page Admin of CF 9.0.1 version version) work with the 9.0.2 version as well?

  2. There are many features that are present in the current 9.0.1 version - for example the sources of data configured in the Admin see Y page there a way I can save these configurations of the existing version and to migrate settings to the new 9.0.2 install, or what I have to do the entire configuration manually after the installation of new? Data sources is something I can think; What other configurations can I save, if such a provision is available?

  3. in the installation of the 9.0.2 version there is a question about "configure the Web server for CF Connector" allows me to add Web/sites Internet servers during installation. If I select "built-in Web server" as the option (so do not configure any Web-site Web server), can I change this and configure Server/site later, after compeleting installation?

  What would be the things I need to be careful during this installation to version 9.0.2 from 9.0.1?

  Thank you!

  Arun-

  I did a successful version 9.0.2; installation answering my own questions, for the benefit of future development-

  1. Yes. Only the serial number is required (as shown in the Page of the CF Admin of existing facility)

  2 configurations (for example: data sources) can be exported. Go to CF Admin Page, click on packaging & deployment, click on Archives of CF. Basically, you export settings as files with the extension archive. car. Once exported from the current installation, it can be imported by clicking on the button deploying car file.

  3 server configuration can be modified (Add/Remove) by using the "Web Server Configuration Tool" which is installed by default with CF 9. You can find it under program files (windows OS).

  I had some problems during the installation. After installation, the CF Admin page would not be made. Virtually no cfm page don't take charge, because the extension is not known by the IIS (or the server you are using). To set this up, use the "Web Server Config Tool" mentioned above. This launch and activate the check box that is on the rendering cfm pages (forgot the exact name). Once this is done, cfm pages must load. I had to enable this and then do a reinstall but.

  -arun

• Installation of VMWare Workstation in Ubuntu [Hardy - Haron]

  Hello Gil,.

  I'm newbie in Linux. I was already using VMWare workstation in my windows.

  Now, I want to install the same version of http://Hardy - 8.04 Ubuntu linux.

  I was downloaded package VMware-Workstation - e.x.p - 240242.i386.bundle more here.

  Can anyone suggest me the steps for installation?

  Thank you.

  Hello

  You can follow this video. It shows how to install Workstation 6.5 on Ubuntu, but it should work for Workstation 7 also.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Installation/update of VMWare on Ubuntu on Fusion tools

  I'm using Ubuntu Linux on the merger (latest version), and he tells me that VMWare Tools are not installed. I think they need to update. How to make updates? I Googled it and tried a few commands in the terminal, but do not by far. Any help would be appreciated.

  Thank you!

  Nathan

  Problems with the specific indications "install or upgrading VMware tools in a Linux Virtual Machine from the command line with the Tar Wizard" in the help file for VMware Fusion, is that they are common because not all Linux distributions are the same, and as such, he should be familiar with the different characteristics of each distribution to install VMware Tools on Linux...

  Species, in the old distributions of Linux, that the mount point is usually / mnt still under Ubuntu, the point is/Media editing so you would need to replace by good fully qualified path whether on your particular Linux distribution compared to what it shows in the directions.

  That said, and after reviewing at the output of the Terminal commands, it shows that not only were using the full qualified path wrong do not issue you orders correctly at first and I'm don't know why you would not just extract the installer of VMware via the GUI tar as I suggested earlier and then go forward from the command line.  In any case below the commands in the order that they should appear based on what is typical on Ubuntu.

  After that selection install VMware Tools from the Virtual Machine menu and it is mounted on the Ubuntu desktop (this normally occurs automatically in this distro) open a Terminal and deal with the following commands.

  Note: You will need to check the segment "cdrom0' of the command"tar"to this being safe, it's 'cdrom0' not 'cdrom1' and using an asterisk in the name of archive tar is correct because you don't actually need to use the full name as"VMwareTools - 7.9.6 - 173382.tar.gz.

  cd /tmp
  tar zxpf /media/cdrom0/*.tar.gz
  cd vmware-tools-distrib
  sudo ./vmware-install.pl
  

  Also, point you issue the command 'sudo./vmware-install.pl' and the actual installation process starts after you type your password then from then on, you can simply press Enter for the questions that followed, with the exception of the resolution of the screen if you want it to be something else, then the default value.

  If you have errors or problems be sure to copy and paste the contents of the Terminal Services session to the response unit.

• Installation of ColdFusion on RHEL 6.1 10

  Hello

  Someone was able to install properly 10 ColdFusion on Red Hat Enterprise 6.1?

  I tried to make it work, but when I try to load the CF administrator after installation I get an error from apache/tomcat.

  http://127.0.0.1:8500/CFIDE/administrator/index.cfm

  exception

  javax.servlet.ServletException: java.lang.NullPointerException

  coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:129)

  coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)

  org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472)

  org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)

  org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928)

  org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414)

  org. Apache.Coyote.http11.AbstractHttp11Processor.Process (AbstractHttp11Processor.java:987)

  org.apache.coyote.AbstractProtocol$ AbstractConnectionHandler.process (AbstractProtocol.jav one: 539)

  org.apache.tomcat.util.net.JIoEndpoint$ SocketProcessor.run (JIoEndpoint.java:298)

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  java.lang.Thread.run(Thread.java:662)

  first cause

  java.lang.NullPointerException

  ColdFusion. CfmServlet.init (CfmServlet.java:82)

  coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)

  coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)

  org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472)

  org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)

  org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928)

  org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414)

  org. Apache.Coyote.http11.AbstractHttp11Processor.Process (AbstractHttp11Processor.java:987)

  org.apache.coyote.AbstractProtocol$ AbstractConnectionHandler.process (AbstractProtocol.jav one: 539)

  org.apache.tomcat.util.net.JIoEndpoint$ SocketProcessor.run (JIoEndpoint.java:298)

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  java.lang.Thread.run(Thread.java:662)

  Any suggestions?

  Thank you

  Simon

  Hi Simon,.

  The license service uses the API of InetAddress.getLocalHost () and so your file/etc/hosts should include an entry for the two localhost as well as for your host name.

  Should resemble your file/etc/hosts

  # This is an example of the hosts file

  127.0.0.1 localhost

  : 1 localhost

  127.0.0.1 LMCFXD01

  Once you have the hosts file fixed, you should be all set.

  Check out http://en.wikipedia.org/wiki/Hosts _ (file)

  Kind regards

  Rupesh

• ColdFusion 7 on Ubuntu

  Hello
  with the help of here and elsewhere, I just install ColdFusion 7 developer on my local machine. When I start it, I get the following:
  From ColdFusion MX 7...
  The ColdFusion MX 7 server is put into service and will be available shortly.
  ======================================================================
  The ColdFusion MX 7 Connector Wizard
  ======================================================================
  Configuration of the connector to webserver (launched in the first round of ColdFusion MX 7 launch script)
  Running apache Connector Wizard...
  [: 36: ==: unexpected operator]
  =======================================
  There was an error when the Connector Wizard
  Installation of the connector was not successful
  =======================================
  ======================================================================
  ColdFusion MX 7 was launched.
  ColdFusion MX 7 will have to write logs to the /opt/coldfusionmx7/logs/cfserver.log
  ======================================================================
  
  In the paper, everything seems fine.
  I can access http://localhost/cfide/administrator/index.cfm, but it's the source code I see...
  Interestingly, on http://localhost:8500/cfide/administrator/index.cfm, I get "unable to connect".
  
  I edited the apache_connector.sh file according to the suggestions of a member of this forum in another post, running the script - apparently successfully - with no effect.
  
  The error comes from cfmx - connectors.sh in the bin directory of CF. But I am unable to do anything "unfitting.
  
  Can anyone help?
  
  Thank you!
  oerzzz

  O, I just it is resolved.
  It was simply a matter of rights.
  In/var/www, there was a cfide directory and symlink CFIDE. The owner of CFIDE is "nobody", and when I use CFIDE in the URL, it works.
  That's all...

  See you soon.

  oerzzz

• Installation of ColdFusion 64-bit with 32-bit Apache web server on Windows Server 2008 64 bit

  This is linked to another discussion that had a solution using a 64 bit unofficial Apache, which is not allowed in my situation.  The discussion is here: http://forums.adobe.com/message/3580001. 

  I have a problem running after you connect the two with wsconfig Apache and ColdFusion services.  I tried to replace the mod_jrun22.so 64 bits with the equivalent of 32-bit and the Apache service will begin, but the ColdFusion services error when loading the jvm.dll.

  Anyone who is familiar with that?

  Apache Web Server 2.2.22

  ColdFusion 9

  Thank you.

  Updates, good news, I've replaced the Java virtual machine and the services are copacetic.

• Ubuntu installation

  Hello

  I have HP pavilion 15 n-012tx, recently I drive recovery procedure and got six DVDs of the OS, so that I now have the Windows8 full operating system in the dvd, I want to change the operating system to Ubuntu.Can I do?

  I have not partitioned the hard disk in multiple reader, I have just a basic motivation of C:, as will be a problem if I partition the hard drive into several readers after removing the Windows OS?

  Welcome to the HP support forums

  first

  including right on my computer > manage > storage

  Right click on the partition sys you (90% C) > shrink > make the desired space 1024 * 20, meaning 20 GB

  great now you 20 GB for Ubuntu and simply

  * Make sure that the new partition in your fourth partition on your system, as if you already have 4
  you need to delete one of them

  Restart your PC, and then you choose the boot from CD/DVD/USB device

  then choose install ubuntu

  Follow the options until you reach app Gparted which controls the partitions in Ubuntu

  now choose it the 20 GB partition

  chanfe then options to

  EX4 journalist / root / format partition: (/) / use this partition

  then next

  Let it complete the installation

  conratulations you have Ubuntu with Win 7

  If this helped you please click on accept as solution

• Cannot be deactivated the previous installations of generator 2 coldfusion

  I can't activate an installation of ColdFusion Builder 2 because it says that I have two adjacent facilities of CF Builder on two other computers.

  The other two computers of hard drives have been erased before CF Builder can be disabled.

  Thus, he still thinks they are currently used.

  What can I do?

  Ted C

  You must contact the Support from Adobe thru tank and ask that your activation reset.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Configuration and ColdFusion 10 silent installation

  Hello

  CF 10 docs seem a little thin on the configuration object and silent installation / silent / scripted.

  I need to find a fully automated (scripted) way to do these things:

  (1) installation of ColdFusion server in stand-alone mode 10

  (2) create instances of additional servers

  (3) configure separately each server instance (parameters, data sources, mappings, etc.)

  It is currently possible with CF 10? If Yes, where is the documentation?

  I aim a cookbook from Chef to perform installations without assistance of CF10 on a farm of Linux guests without a head. Manual configuration through the user administrator interface is a deal breaker defined here.

  Thanks in advance!

  Best regards

  Jan

  For more convenience, a summary...

  How to silently:

  1 a) install server ColdFusion 10 software: 4721871

  installation of instance of the server default full 1 b): 4722100

  (2) create instances of additional servers: 4722350

  (3) configure separately each instance of the server: 4724683

  Related files:

  Neo-security - config.sh

  example - configuration.cfm

  BR,

  Jan

• Error installing on linux (Ubuntu)

  mreed@hallowserv3:/mnt/hallowpod1/public/software/blackberry$ ./installer-bbndk-1.0-linux-3312-201110112127-201110120215.bin
  Preparing to install...
  Extracting the JRE from the installer archive...
  Unpacking the JRE...
  Extracting the installation resources from the installer archive...
  Configuring the installer for this system's environment...
  
  Launching installer...
  
  exec: 3225: /tmp/install.dir.24229/Linux/resource/jre/bin/java: not found
  

  mreed@hallowserv3:~$ uname -r
  2.6.32-27-server
  mreed@hallowserv3:~$ lsb_release -a
  No LSB modules are available.
  Distributor ID: Ubuntu
  Description:    Ubuntu 10.04.3 LTS
  Release:    10.04
  Codename:   lucid
  

  mreed@hallowserv3:~$ ls -ails /tmp/install.dir.24229/Linux/resource/jre/bin/java
  790721 48 -rwxr-xr-x 1 mreed hallowtech 47308 Apr 12  2010 /tmp/install.dir.24229/Linux/resource/jre/bin/java
  

  mreed@hallowserv3:~$ ls /tmp/install.dir.24229/Linux/resource/jre/bin
  ControlPanel  java  java_vm  javaws  jcontrol  keytool  orbd  pack200  policytool  rmid  rmiregistry  servertool  tnameserv  unpack200
  

  https://www.BlackBerry.com/jira/browse/Tablet-376

  Why is there a Setup anyway? Please provide a .zip or. tar.gz.

  In order to run the program installation and the IDE on Ubuntu 64-bit, you need to install the ia32-libs

  Source: https://bdsc.webapps.blackberry.com/native/download/requirements/