Advanced POS 5.8 only sees the system databases in SQL Server 2014 and fails when attempting backup

Similar Questions

• Service SQL Server 2014 will not start start after the update sp1 (KB3058865, KB3075950, KB3094221)

  Hi, my SQL Server 2014 works very well in my server with WIndows 2012 until I installed the new day & service pack that was required for server hardening.

  I successfully installed SP1 KB 3058865 first, then discovered that the services do not start. After so much research to fix, I came with the 2 cu updates KB3075950, KB3094221 in knowing that it could solve my problem but unfortunately is not.

  I also tried to change the service account that many suggest, but his does not work.

  I tried to replace the master file & maslog but also failed.

  I tried to run etc and unique usermode and restore master db... also failed.

  Here is the log file:

  16/02/01 15:21:21.83 Server Microsoft SQL Server 2014 (SP1 - CU3) (KB3094221) - 12.0.4427.24 (X 64)
  October 10, 2015 17:18:26
  Copyright (c) Microsoft Corporation
  Standard Edition (64-bit) on Windows NT 6.2 (build 9200 :) (hypervisor)

  2016-02-01 15:21:21.84 setting the server UTC: 08:00
  2016-02-01 15:21:21.84 Server (c) Microsoft Corporation.
  2016-02-01 15:21:21.84 server all rights reserved.
  2016-02-01 15:21:21.84 server process ID is 5128.
  2016-02-01 15:21:21.86 Server system manufacturer: "Microsoft Corporation", model of system: 'Virtual Machine '.
  2016-02-01 15:21:21.86 the server's authentication mode is MIXED.
  2016-02-01 15:21:21.86 Server record SQL Server messages in file ' C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG'.
  2016-02-01 15:21:21.86 Server service account is "NT Service\MSSQLSERVER". This is an informational message; no user action is required.
  2016-02-01 15:21:21.86 registry server startup parameters:
  -d C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\master.mdf
  e C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG
  l C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\mastlog.ldf
  2016-02-01 15:21:21.86 Server startup command line parameters:
  s 'MSSQLSERVER '.
  2016-02-01 15:21:22.27 Server SQL Server has detected 1 struggling with 1 cores per socket and 1 logical processors per socket, 1 total logical processors; using 1 logical processors based on SQL Server licenses. This is an informational message; no user action is required.
  2016-02-01 15:21:22.27 Server SQL Server starts at the normal base priority (= 7). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.28 Server has detected 7999 MB of RAM. This is an informational message; no user action is required.
  2016-02-01 15:21:22.28 Server using conventional memory in the memory manager.
  2016-02-01 15:21:22.33 default server collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
  2016-02-01 15:21:22.37 Server this instance of SQL Server is a latest report by using a process ID of 1600 at 01/02/2016 15:13:12 (local) 01/02/2016 07:13:12 (UTC). This is an informational message only; no user action is required.
  2016-02-01 15:21:22.38 the maximum number of connections administrator dedicated to this server instance is '1 '.
  2016-02-01 15:21:22.38 configuration of server node: node 0: CPU mask: 0 x 0000000000000001:0 Active CPU mask: 0 x 0000000000000001:0. This message provides a description of the NUMA configuration for this computer. It is an informational message only. No user action is required.
  2016-02-01 15:21:22.40 allocation of dynamic locking using the server.  Initial allocation of blocks of lock of 2500 and 5000 per node lock owner.  It is an informational message only.  No user action is required.
  2016-02-01 15:21:22.43 spid8s start database 'master '.
  2016-02-01 15:21:22.49 Server CLR version loaded v4.0.30319.
  2016-02-01 15:21:22.51 spid8s d - 8 operations in the database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.61 Server common language features (CLR) runtime initialized using CLR version C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ v4.0.30319.
  2016-02-01 15:21:22.62 spid8s 0 operations cancelled in database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.62 spid8s Recovery is writing a checkpoint in database 'master ' (1). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.79 spid8s SQL Server Audit begins audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.80 spid8s SQL Server Audit has begun audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.88 spid8s Trace SQL ID 1 was launched by the "sa" login
  2016-02-01 15:21:23.28 spid8s server name is "UATCASADB". It is an informational message only. No user action is required.
  2016-02-01 15:21:23.28 spid13s A self-generated certificate was loaded successfully for encryption.
  2016-02-01 15:21:23.33 spid13s Server listens on ['none' 1433].
  2016-02-01 15:21:23.40 spid13s Server listens on ['none' 1433].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\SQLLocal\MSSQLSERVER].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\sql\query].
  2016-02-01 15:21:23.48 Server Server listens on [: 1 1434].
  2016-02-01 15:21:23.49 Server Server listening on [127.0.0.1 1434 ].
  2016-02-01 15:21:23.49 connection admin support dedicated server was created for locally listening on port 1434.
  2016-02-01 15:21:23.49 Server SQL Server attempts to save an of Service Principal name (SPN, service principal name) for the SQL Server service. Kerberos authentication is not possible, until a name for the SQL Server service is SPN. This is an informational message. No user action is required.
  2016-02-01 15:21:23.60 spid14s A new instance of the full-text filter daemon host process has been started successfully.
  2016-02-01 15:21:23.71 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph] for the SQL Server service.
  2016-02-01 15:21:23.72 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph:1433] for the SQL Server service.
  2016-02-01 15:21:23.97 spid17s start database 'msdb '.
  2016-02-01 15:21:23.98 spid18s database startup "ReportServer".
  2016-02-01 15:21:23.98 spid19s database startup 'ReportServerTempDB '.
  2016-02-01 15:21:24.03 spid9s start database 'mssqlsystemresource '.
  2016-02-01 15:21:24.08 spid9s the base resource database build version is 12.00.4427. It is an informational message only. No user action is required.
  Error logon 2016-02-01 15:21:24.11: 18401, severity: 14, State: 1.
  2016-02-01 15:21:24.11 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:24.18 spid19s 1 transactions rolled forward in the 'ReportServerTempDB' (6:0) database. It is an informational message only. No user action is required.
  2016-02-01 15:21:24.28 spid19s 0 transactions cancelled in the database 'ReportServerTempDB' (6:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.44 spid17s 133 transactions rolled forward in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.73 spid17s 0 transactions cancelled in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.74 spid17s Recovery is writing a checkpoint in database 'msdb' (4). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.79 spid9s start database 'model '.
  2016-02-01 15:21:25.01 spid9s clearing tempdb database.
  2016-02-01 15:21:25.94 spid9s start database 'tempdb '.
  2016-02-01 15:21:26.12 spid20s The Service Broker endpoint is in a disabled or stopped state.
  2016-02-01 15:21:26.12 spid20s The Database Mirroring endpoint is disabled or stopped state.
  Manager of Service Broker 2016-02-01 15:21:26.15 spid20s began.
  2016-02-01 15:21:27.32 spid8s database 'master' is upgrading script 'msdb110_upgrade.sql' of level 201328592 level 201331019.
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:27.32 spid8s start PRE_MSDB execution. SQL
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:28.36 spid8s configuration database COMPATIBILITY_LEVEL option for 100 for database 'msdb '.
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.56 spid8s start PRE_SQLAGENT100 execution. SQL
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.60 spid8s configuration database option COMPATIBILITY_LEVEL of 120 for the database 'msdb '.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  Error logon 2016-02-01 15:21:29.18: 18401, severity: 14, State: 1.
  2016-02-01 15:21:29.18 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:31.84 spid8s attempting to load library 'xpstar.dll' in memory. It is an informational message only. No user action is required.
  "2016-02-01 by using spid8s 15:21:31.86"xpstar.dll' version ' 2014.120.4100 ' to run the extended stored procedure 'xp_instance_regread '. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC TRACEOFF 1717, process server ID (SPID) 8. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC execution completed. If DBCC printed in error messages, contact your system administrator.
  2016-02-01 15:21:31.90 spid8s
  2016-02-01 15:21:31.90 spid8s create table temp_sysjobschedules
  2016-02-01 15:21:32.20 spid8s
  2016-02-01 15:21:32.20 spid8s Alter table sysdownloadlist...
  2016-02-01 15:21:32.22 spid8s
  2016-02-01 15:21:32.22 spid8s Alter table sysjobhistory...
  2016-02-01 15:21:32.24 spid8s
  2016-02-01 15:21:32.24 spid8s Alter table systargetservers...
  2016-02-01 15:21:32.25 spid8s
  2016-02-01 15:21:32.25 spid8s Alter table sysjobsteps...
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.42 spid8s
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.42 spid8s PRE_SQLAGENT100 execution. Full SQL
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.46 spid8s DMF pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s DC pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s check if Data collector config table exists...
  2016-02-01 15:21:32.84 spid8s State of collector of data before the update: 0
  2016-02-01 15:21:32.84 spid8s pre_dc100::Check if syscollector_collection_sets_internal table exists...
  2016-02-01 15:21:32.84 spid8s pre_dc100::Capturing Collection to define the status of temporary table...
  2016-02-01 15:21:33.05 spid8s Deleting cached generated automatically collect T - SQL packages to msdb data...
  2016-02-01 15:21:33.05 spid8s end of the DC pre-staged to level as follows.
  2016-02-01 15:21:33.05 spid8s DAC pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s from CAD pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s end of the CAD pre-staged to level as follows.
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.06 spid8s start execution of MSDB. SQL
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.37 spid8s check the size of the MSDB.
  2016-02-01 15:21:33.63 spid8s error: 8966, severity: 16, State: 2.
  2016-02-01 15:21:33.63 spid8s can not read and lock the page (1:56616) with lock type SH. page no ID invalid. has failed.
  2016-02-01 15:21:33.63 spid8s error: 8946, severity: 16, State: 12.
  2016-02-01 15:21:33.63 spid8s Table error: Allocation page (1:56616) has invalid header values to the PFS_PAGE page. The type is 0. Check the type, unit ID of ID and the ID of the page on the page.
  2016-02-01 15:21:33.63 spid8s error: 912, severity: 21, State: 2.
  2016-02-01 15:21:33.63 spid8s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' has detected 3601, an error state 5, severity 25. It is a serious condition that could interfere with the normal operation and the database is taken offline. If the error occurred during the upgrade of the 'master' database, it will prevent the entirety of a SQL Server instance to start. Review the previous entries in the error log, take appropriate corrective action and restart the database so that the script upgrade steps run until the end.
  2016-02-01 15:21:33.64 spid8s error: 3417, severity: 21, State: 3.
  2016-02-01 15:21:33.64 spid8s cannot recover the master database. SQL Server cannot run. Master of restoring a full backup, repair or rebuild. For more information on how to rebuild the master database, see the SQL Server online documentation.
  2016-02-01 15:21:33.64 spid8s stop SQL Server launched
  2016-02-01 15:21:33.64 spid8s trace SQL stopped due to server shutdown. Trace ID = "1". This is an informational message only; no user action is required.
  2016-02-01 15:21:34.70 spid8s error: 25725, severity: 16, State: 1.
  2016-02-01 15:21:34.70 spid8s an error occurred trying to empty sessions extended all running events.  Some events may be lost.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc/servername.urldomain] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc / servername.urldomain:1433] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.

  -----------------------------------------------------------------------------------------------

  I would be grateful for all the help I can get. Thank you.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Installation of Microsoft SQL server 2014 on Windows server 2012 R2 Std (Eng the 64-bit environment)

  I am about to install Microsoft SQL server on my server Windows 2012 R2 2014.

  The network consists of three offices of construction, all connected through VPN tunnels.

  There is only one server in each office, all promoted domain controllers servers. (Two servers running Windows 2012 R2 server Std, the first domain controller is running on the Windows 2008 R2 server).

  The installation allows me to have single login in one of the networks of site and access my storage server.

  I have some difficulty during the installation of Microsoft SQL server 2014. It seems that the service will not start.

  I install SQL server by using the domain administrator, such as the local administrator account is deleted due to the promoted feature of DC. Facilities is made from the server that will have the SQL service running.

  Best practices or the settings before installation very appreciated.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Restarting my computer (Dell... Microsoft XP), the system tries to install creative projects and requires the insertion of a CD that I don't have or want.

  Restarting my computer (Dell... Microsoft XP), the system tries to install creative projects and requires the insertion of a CD that I don't have or want.

  I tried all obvious ploys, but I can't always Cancel/remove this element which is a nuisance, because it prevents me to install other programs that I want to.
  Any other suggestions would be welcome.
   
  Original title: CREATIVE WINDOWS

  Robert,

  Try to run this Fixit: http://support.microsoft.com/mats/Program_Install_and_uninstall

• Where am I going to access the the system restore on my Vista "help and support." It has been easy on XP!

  Support under XP system quite simply, I went to 'Help and support' clicked on it, and a new screen open and followed the easy prison. Where am I going to access the the system restore on my Vista "help and support."  I just want to go back to a previous restore point.  Thank you!!

  Hello

  Start - All Programs - Accessories - System Tools then system restore should be visible.

  Also, a lot of PC brand have a restore option of the system via F8 at startup, and then click "fix." Useful if you cannot start Windows successfully.

  Also you can click on start and then just type rstrui.exe and press ENTER.

  Please mark this as useful or response if applicable.

  Tricky

• Vista wouldn't boot - the system starts for a few seconds and powers down.

  I have a laptop computer HP6915 under Vista Premium. When I turn on the system starts for a few seconds and turns back. I don't know if there is a hardware problem or if Vista is somehow corrupted. I tried to enter the net bios, but the machine does not respond to the F2 command. Ideas?

  Hello

  Symptoms, especially since it will be impossible to access BIOS, mean that you need a real computer
  Shop (not the leeks and the glances at a Best Buy or other stores) or HP support.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

  I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

  c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

  This file can be replaced.  When I scan this folder individually its fine, please help

  Thank you

  Hello

  What protection software antivirus you are running on the computer?

  Method 1: Check if you can run the scan in safe mode without in all questions

  Follow the steps mentioned in the link below to access the secure mode
  Startup options (including safe mode)

  Method 2: you can run Safe Mode security monitor, see the steps in the article below
  How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

  Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
  Check your hard drive for errors

  If the problem persists,

  Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

  Note: Copy the file to the original location.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed).

  Original title: necessary emergency aid

  Windows lost completely. After trying a variety of things, I finally got one to start, but my entire system had returned back to the year 2012.

  After updating my anti-virus and other security programs, I tried to check the updates of Windows, but I get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed). You run the Windows Update Troubleshooting Wizard and he said that he had set things so I rebooted to try check update again. However, I get the same message.  There is nothing showing at all when I click "update history", but check "updates installed" shows things are fine until 2012.

  Please, how can I get my system again right?

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Œuvres SQL query to MS SQL Server 2008, but not when you use the database kit

  I have this SQL query:

  DECLARE TABLE (@DataTypeTable)
  Name varchar (128).
  TypeID INT)

  -Add comma delimeted type data in the temporary table names
  INSERT INTO @DataTypeTable (name)
  SELECT * from WhatWeShouldDoRead.func_Split (@DataTypeTrimmed, ',')

  SELECT the name OF @DataTypeTable

  That takes a comma delimited by the string and returns the string as a table.  It works correctly in Microsoft SQL Server Management Studio.  When I run this as a stored procedure I return nothing.  There are no errors, SQL or otherwise.  I checked that I am connected to the correct database and the stored procedure is responsible without changing any error chain which is reported of this stored procedure (that code is not shown in the example above).  Has anyone seen this problem before, or have experience with SQL/Labview interfaces to tell me what I am doing wrong?

  Thanks in advance.

  
  

• Problem installing SQL Server 2014 with the language of the OS

  I installed a new 2012 french windows server essentials.

  Then I tried to install sql server 2014 standard (English version). But, it is not possible. I get the message "this SQL server installation media does not support the language of the operating system, or does not have the SQL Server installation files English version.» Use the correspondent... ».

  Then I tried several solutions provided on different forums on the web. Now my system is set to English (United States), but the message still appears at the beginning of the installation of SQL.

  Any suggestion will be fine... I'm tired of installation problems.

  BB

  Hello

  You can post your question Server 2012 Server TechNet forums, that your question is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please repost your question about SQL Server in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• The call for a SQL Server SP in PL/SQL Server

  I'm currently run a remote stored procedure (SP) on the system of MS SQL Remote Oracle Server.
  
  It is where I am currently and if I'm not mistaken this call must be correct:
  
  ---------
  DESC 'dbo '. "GetIdByLoginEmail"@mssql
  PROCEDURE GetIdByLoginEmail"@mssql
  Name of default input/output argument type?
  
  @login VARCHAR2 IN
  @email VARCHAR2 IN
  result_set_handle REF CURSOR OUT
  
  * refcursor variable r *.
  * exec "dbo." "GetIdByLoginEmail"@mssql('test','[email protected]',:r) *.
  BEGIN "dbo." "GetIdByLoginEmail"@mssql ('test', '[email protected]',: r); END;
  
  *
  ERROR on line 1:
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [Transparent gateway for MSSQL] [A04B] An incorrect number of parameters passed to saved the query specification
  dbo. GetIdByLoginEmail(). It has 3 parameters and not 2 as indicated.
  ORA-06512: at line 1
  ----------
  
  Anyone has an idea why this call fails? I can't find a lot of resources on this topic.

  Take a look at Metalink note:
  Article no.: Note 351400.1
  Title: How to call a remote procedure to Sybase using TG4SYBS

  It was written for TG4SYBS, but works for MS SQL Server, too.
  This note contains a sample how to call a foreign procedure using ref Cursor through the gateway.

• What is the date of end SQL server 2008 SP2 support?

  What is the date of end SQL server 2008 SP2 support?

  Have you tried Google? or:

  ASK THE QUESTION IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• Microsoft SQL Server 2014 (SP1 - CU4) (KB3106660) query failed with error ORDER BY items must appear in the select list if SELECT DISTINCT is specified.

  Hello
  I use Microsoft SQL Server 2014 (SP1 - CU4) (KB3106660) Enterprise Edition (64-bit) on Windows NT 6.1 (Build 7601: Service Pack 1)

  SELECT DISTINCT A.PI_LOOKUP_CATEGORY_ID,
  REPLACE (REPLACE (UPPER (A.LOOKUP_CATEGORY_NAME), ' ', '_'), '-', '_') AS CATEGORY_TECH_NAME,
  A.LOOKUP_CATEGORY_NAME,
  A.LOOKUP_CATEGORY_DESCR,
  COUNT (B.PI_LOOKUP_CATEGORY_ID) AS USAGE_COUNT
  FROM [PI_LOOKUP_CATEGORY] A LEFT OUTER JOIN B [PI_INSIGHT_COLUMN] WE
  A.PI_LOOKUP_CATEGORY_ID = B.PI_LOOKUP_CATEGORY_ID
  A.PI_LOOKUP_CATEGORY_ID GROUP,
  REPLACE (REPLACE (UPPER (A.LOOKUP_CATEGORY_NAME), ' ', '_'), '-', '_').
  A.LOOKUP_CATEGORY_NAME,
  A.LOOKUP_CATEGORY_DESCR
  ORDER TO REPLACE (REPLACE (UPPER (A.LOOKUP_CATEGORY_NAME), ' ', '_'), '-', '_')

  above request is failed with error ' ORDER BY items must appear in the select list if SELECT DISTINCT is specified. " Microsoft SQL Server (SP1 - CU4) 2014 (KB3106660)

  same query works fine with older versions of SQL servers like (2008R2, or 2012)

  Please let me know the resolution of this problem...

  Thank you
  Touria

  Ask here:

  MSDN - SQL Server - Microsoft forums

• Hotmail: the current format of hotmail is clumsy and stiff when retrieving emails "Sent" or "deleted".

  The current format of hotmail is clumsy and stiff when retrieving emails "Sent" or "deleted". We get bundles of emails when trying to get one on the screen. How can I isolate and recover a single e-mail received or sent, to be able to print without the printing of other incoming or outgoing emails? waste of ink are considerable. Nuisance is infuiating.

  Better yet, can we just get back to the proper format, we had in this regard for the years?

  The current format of hotmail is clumsy and stiff when retrieving emails "Sent" or "deleted". We get bundles of emails when trying to get one on the screen. How can I isolate and recover a single e-mail received or sent, to be able to print without the printing of other incoming or outgoing emails? waste of ink are considerable. Nuisance is infuiating.

  Better yet, can we just get back to the proper format, we had in this regard for the years?

  Hello

  Hotmail has it's own support forums. Here is a link for your convenience.

  Live Hotmail forums

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP