TV as external monitor: works when starting then stops working

Similar Questions

• 17 3200 envy: Envy 17 3200 screen flickers and dies. External monitor works. (Video included)

  Hi, I bought my laptop about two years ago. A few days ago the screen suddenly dies, and at startup, it flashes several times with the correct display, but then turns off. The backlight seems to stay on. When I use an external monitor with HDMI port, the external monitor works fine, however, the laptop screen remains empty. Here's a video of what it looks like when I first boot the laptop: https://www.youtube.com/watch?v=mmro4P1NmyY & feature = youtu.be , how can I do to fix this problem? Thanks, Wes

  @Saichotic ,

  Hello and thanks for the display on the HP support forum.  It is somewhat a problem when it comes to laptops that comes up from time to time.

  The reason is there is a cable connected to the motherboard that goes back through the hinge area and connects to an inverter that powers the monitor.

  Once the cable wears out, but more often just to move General around get you a loos to the inverter or the motherboard connection.

  Here is a link to your Maintenance and service guide. You can use this to help pull the cable and inspect the connections.

  Maintenance and Service Guide

  Here is a video that will show you how essentially happen to things as well to test and check the cable.

  The HP Envy 17 laptop computer screen replacement procedure

  Now, if it of a little too difficult to manage, and believe me it took me a couple years before that I liked working on laptops is not a problem.  Contact HP support by phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks for posting and have a great day.

• (Laptop HP-2000) White screen, external monitor works.

  (HP 2000 Notebook PC / Windows 8.1, 64-bit) Still white screen, external monitor works fine. What components could be defective? This occurred about six months ago about a week after the expiry of the one year warranty. Nonfortuitous.

  Hello

  You confirm this problem is intermittent, and now its working fine, it means that the question would be the display cable. The display cable is loose. Issue can be fixed by rebonding the display cable, if the problem persists then the display cable needs to be replaced.

  This is the only reason why I asked you in the previous post if the problem was intermittent or display changed while moving the display cover.

  This particular problem has nothing to do with the temperature.

  Kind regards

  Sumit

  I am an employee of HP

• Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop

  Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop immediately.

  Repetition and crashes again. Help it does not start!

  Solved! Tried everything in support documents and none of it worked. Frustration massive Adobe Chat staff who knows nothing and just told me to look at the documents of support again and again. They also gave me a phone number in Australia which has a recorde d message saying that the product is not supported! What is everything?

  Finally Adobe technical support Anand called me (from when I have opened the original case of support which gave me the serial number).

  Just had to rename the file SLCache in c:\program (x 86) and again the EULA and reactive. Now everything works fine. Way to hard.

• my laptop connects to an external monitor at the start, but then turns off I have xp sp3 with anyone who can help

  When I boot my laptop with an external monitor or TV it showws the logo of windows but when it starts good happening to and does not display the message no signal

  It allows to work with vista but uninstalled vist because I do not love

  is this a fault of software with xp

  Hello

  · What is the number and the model of the laptop?

  · What is the exact error message that you receive with error code if any?

  Check out the links and then re - configure multiple monitor and check if that helps.

  Hardware requirements for the display Support in Windows XP: http://support.microsoft.com/kb/296538

  How to configure and use multiple monitors in Windows XP: http://support.microsoft.com/kb/307873

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• External monitor works but integrated screen is not

  Hello

  I have a model of Macbook Pro 13 of the retina (mid-2013) .

  A few months back the display has stopped working, but when I hooked to an external monitor everything worked as expected except the screen of course.

  I took it to the service center and a descent computer repair shop and they both said that display connection with the logic board is fried and they need to fix the logic board that retina display is fine.

  The price they are quoting is about $ 900, which is not fair.

  The logic card cannot be repaired?

  anyone else in a similar situation?

  If all the otherwise failed I think I'll delete the entire display of macbook. Someone knows how to do this?

  Thank you!

  Welcome to the CSA!

  Because of the tiny parts and connections on a logic board, repair is usually not an option. I don't say it can't be done, but it's hard to find someone who can / will work on resolder delicate bits on a LB (redistribution) without making a mess of labor law.

  You live in the United States? If so, ask about a "repair." Instead of working on the computer in the Apple Store, they send to Apple rehabilitation center where they pretty much fix everything what they find wrong inside (with the exception of the display unit itself) for a flat rate that is much lower than the cost that you quoted for repair in the store. I believe that the current price for this service is approximately US$ 315.

  The only downside I see is that the repair takes about a week, largely during the transportation to and from the depot.

  If you are not in the United States, ask anyway. I don't know what Apple has implemented for this kind of repair outside the United States.

• External monitor works only with the Macbook Pro?

  I just bought a Macbook Pro 15-inch (mid-2015, OS X El Capitan 10.11.4) and planned to connect it to my BenQ GL2450HM (he had since worms 2011 for my Windows PC). I had a DVI adapter for them, but the card connects to the cable correctly (as it goes down easy) and then when I plugged it, the monitor gave me a green light for a bit, but finally displays 'no signal' and the screen went black, and yellow light. But when I pulled the cable out of my monitor, he said "no cable not connected" (implying that he entered the connection somehow before that?)

  So, I read while holding down the option key to detect monitors, but that did not work. Put the laptop to sleep and then wake it up didn't work either. I also tried to plug the adapter to DVI/VGA Converter that I have, but they fit together. I tried to plug the adapter directly to the DVI port on my monitor, but they are not at all together.

  I feel, it should be possible to make the Macbook and monitor work together, but I'm stuck to know exactly what needs to be fixed. Probably the adapter or DVI cable, however. Do you have any suggestions?

  I don't see that this is not possible, so I am that give a bump.

• White laptop of Lenovo Windows 7 screen... .external monitor works

  Don't know if I should ask this here... but... I have a laptop lenovo of 64-bit WIndows 7. Suddenly two weeks, the screen went black... It was working fine until I barely touched to adjust the angle and the screen went away. At startup, I very very VERY vaguely see the Thinkpad logo then nothing. Took it to the repair shop, first of all, they thought it was a problem of backlight, but a new screen OEM does not solve the problem. Now, they say it's probably the motherboard.  New MB costs as much as the computer (it is obviously OQ). It works fine with an external monitor, tho which kind of defeated the purpose of the laptop. Want to just an opinion... is this really very likely the MB or is it something else? Thanks for any info.

  Hello

  You need check the connection between the screen and the motherboard. The connection could have been disconnected with you have changed the angle of the screen. There are tutorials on youtube on how to do it.
  David

• I can't open my email IE account - it starts then stops and an error pop up My IP tried but it's IE-I have windows XP

  After a Windows Update - the next morning I couldn't open IE to get my emails. It starts to load and then stops. An error message appears that says: an unknown error has occurred. Account ' pop - server.cfl.com. Server "pop - server" pop protocol: pop3, port110 Secure [SSL}: no, error # Ox800co133.]    I called my provider IP-BRIGHT HOUSE and the Department tech ran me through a bunch of hoops and finally said the problem was with Windows. I called the MICROSOFT HELP #1 800 642 - 7676 # and tersely told they do not have XP support, except for free fees. $ 59.95.  The fact that I am a person aged 68 year on a small pension does not stage a bite person and $60.00 for a problem that began after only an automatic update did not seem to matter either. If anyone can help I would know you more. I depend on my e-mail with the requirements of the order and stay in touch with my friends and my daughter-son. Thank you very much. Cordially - Donald

  Hi Donald,.
  Here is a walk through one of our best community members Bruce Hagan.
  I think that this is your specific problem.

  Error number: 0x800C0133 = a corrupt Inbox.

  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/error-ox800co133/849906f8-0893-40AA-BA8B-4ff7b9c6f279?auth=1

  Let us know if you have any questions.
  B Eddie

• whenever I'm down load it starts then stops and says that it has been discontinued.

  I'm going to download FireFox, it starts, then he says that he has been interrupted. I tried for days that it just keeps telling me the same thing.

  Try this:

  • Download the installer of Firefox and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/
  • Start the installation by double-clicking on the desktop icon

• Re: Satellite C660 - fan starts then stops

  Hello

  Sorry for my English, I'm French, I have a Toshiba Satellite C660 laptop a few days ago and I noticed that the fan starts and stops every minute at any time when the temperature exceeds about 40 degrees (noted with SpeedFan).
  Even if I'm just the desktop, the Internet. However, it does not heat up much. Is this normal?

  Before I had a laptop and the fan stops, but almost never had low-noise. I prefer it, but it's can be a simple matter of habit for the Toshiba...?

  Hello

  Try it please change cooling method option in the advanced power settings.

  Open power options > n a click your power profile that you use > choose the advanced power options > Toshiba Power Saver Settings > cooling method > change two optimized battery options.

  I think that this will reduce fan activity.

  Please test and send feedback.

• Tecra S11 - 11G - external monitor flickers when the Wifi is enabled

  I have a similar problem on my brand new Tecra S11 - 11G. The only difference is that the problem is present only when I have my laptop plugged in and turned on WiFi radio.

  If I turn the Wifi radio off and keep the laptop connected to the power source, the external screen keeps flickering. If I keep the WiFi radio and disconnect it from the power source blinking stops, too.

  I reported this problem to Toshiba customer to the Portugal (where I bought it) and they gave me the ticket case #710008193. They said that they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new. A customer still expects to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft. In addition, this laptop is part of a fleet of the company who buys only Toshiba laptops and we are talking about a Tecra and not a Satellite. We deserve more respect from Toshiba.

  In a year or two, I have a new laptop (company policy) and it surely won't be a Toshiba.

  > They said they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new

  That is why amazing? A hardware malfunction can still happen and this happens not only in the world of the computer/laptop. Therefore, manufacturers provide a service to a client and failure may be fixed and covered by the warranty.

  > A customer still waiting to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft

  Of course you are right, but in the reality of things happening.
  My PS3 died after a short period of time. It has been fixed and replaced under warranty conditions, but this isn't a reason for me to say; I would not buy PS3 more because of this problem.
  My BMW had some engine problems, that it was fixed under warranty and I would buy this car again once because this car is great and I think other builders are no better, and I think this would also happen to other manufacturers

  That s my personal opinion in the opinion

  Greetings

• Satellite 4030cdt has a white screen but external monitor works properly

  Hello
  I have the following problem.
  My boss give me a Satellite 4030cdt laptop because the screen was white and because he was old.
  The rest of the laptop works very well so I want to make 100%
  But sometimes I see a bit of an image at boot and sometimes a bit of Win xp.
  Half of the screen and then "working" and after a while the screen turns white.

  I have a link that says get the answer, but you have to pay for it and I don't want to pay for something, if I'm not sure 100% if I get the right answer.
  or they say he cannot be resolved.
  I hope you understand what I am trying to explane.
  This is the link. http://www.experts-exchange.com/hardware/Laptops_Notebooks/Q_21759183.html

  Greetings hans visser

  Hello

  According to your description there is certainly some malfunction of the display. If everything works with external display, this means that you might not suspect graphics card. The display must be replaced.

• External monitor works does not after upgrade

  Hello friends.

  Computer and software (Production Premium CS5.5) have improved. I use an external bridge connected via Firewire. Premiere Pro sees the bridge but does not the image/video to it. I even managed to capture from the first bridge without problem. No matter what I tried first will not export to the NTSC monitor. He did it in Production Studio Premium. With the software, I had before she would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for the color calibration. Any help would be greatly appreciated.

  CS5.5 Production Premium

  Two DVI monitors

  Quadro 2000 video card

  Windows 7 Professional - 64-bit

  I7 with 16 gigs ram