Installation of Forms 11 g 64 bit on Windows Server 2008 64 bit
HelloWe are trying to install Forms 11 g 64 bit with WebLogic 64 bit on windows Server 2008 64-bit and followed by the short list of Jan Carlin:
-installed the 64-bit JDK
-installed WLS1032-generic
-a started installation of forms/States
Installation of the software worked fine and the part of configuration has created the field, but from the failure of area (hang).
Information in the log file:
=========================================================
oracle.as.provisioning.util.ConfigException:
Fehler beim Starten der field.
Cause:
Zeituberschreitung beim Starten von Admin_Server.
Action:
Weitere information, see Sie in den connects.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
]]
[2010-02-22 T 19: 37:39.730 + 01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B, 0] []
oracle.as.provisioning.exception.ASProvWorkflowException: workflow runtime error.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
================================================
I read somewhere that the reason might be that the installation uses 32-bit JDK, but I don't know if I did something wrong.
Somewhere else I read that the reason might be the path parameter, which may include some directories with emphasis in the name which could be a problem for Weblogic.
No idea or help is appreciated.
Thank you
Mark
Hello
You have a directory containing c:\Program Files (x 86)-in your path?
If so, set the PATH without this / these director (y) / (ies) before launching the setup.exe:
Example:
set PATH=%WINDIR%;%WINDIR%\system32
Setup.exe
Concerning
Tags: Oracle Development
Similar Questions
-
error starting forms and reports manageed servers on windows server 2008
This drug has been authorized during the installation and configuration steps, to forms and reports, run application, 2 days later, servers collapsed and it was impossible to start:
[2013 09-26 T 12: 20:03.199 - 04:00] [AdminServer] [NOTICE: 28]
[] [oracle.sysman.core.pagemodel.logmgmt.msgs.LogMessagesPageModel] [tid: [ASSETS].] [ExecuteThread: '4' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: weblogic] [ecid: 09f1d44aa5c550d0:-67c617bc:1415b0acd1e :-8000-00000000000000 c 3, 0]
[APP: em] Lack the o registro Configuracia³n're Va¡lida para los destinos: / Farm_FormsReports/FormsReports/WLS_FORMS, / Farm_FormsReports/FormsReports/WLS_REPORTS
any suggestions?
WebLogic 10.3.4
11.1.1.4 forms
Windows Server 2008 x 64
JDK: java 6u30 x 64
delete all, re-install all... ok
-
Required for the installation of Oracle Database 11 g 2 on windows server 2008
Hello
I'm looking for progressive oracle support, but I am unable to find a note that details install requirements of Oracle 11 g 2 database on 32-bit platform of windows server 2008. Anyone know where to find the requirements? I need so I can prepare the documentation available to migrate our database servers.
Thank youHello
they can be found in the installation guide: [url http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#i1011417] requirements Oracle under Windows.
Herald tiomela
http://htendam.WordPress.com -
Oracle 10.1.0.4 on Windows Server 2008 64 bit Standard
Hello
For purposes of migratiion, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bit Standard and then update to 11 g.
We forced installation Oracle 10.2.0.4 on a Windows Server 2008 64-bit Standard, but we are not safe for 10.1.0.4.
Given that we do not have this version of the software to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bit Standard?
Could you point me to a document referring to Oracle versions compatibility with Windows Server 2008?
Thank youAt MOS, click the Certificates tab, and then enter the database in the first menu drop-down and select the RDBMS. Then enter the relevant information in other blocks, and then you will see the database Oracle 10.1.0.4.0 is not certified for Microsoft Windows x 64 (64-bit) 2008 R2
Certification is a little stricter than the support, but extended support ended in January. REMINDER: First Support for Oracle Database 10.1 ends January 2009 [761713.1 ID]
There is always a lifetime support, but your case shows how useful that can be.
-
Hello
I encountered the following error when I try to open the form in oracle EBS R12.1.1
It stuck for a little while and then appears an error message
FRM-92101: there was a failure when starting Server Forms...
(I've never been able to run the form on this)
I ran a vision online forum that works very well which means java is ok.
It is the new installation on windows server 2008 32-bit with costs of database (no vision).
I search on the internet and tested all of the available options, including;
change in the registry for example 1024,12288,1024 etc.
marking the check box for oracle process manager to PROD "allow service to interact with desktop".
check the configuration files of forms (all files of any bad path that I found and corrected)
running files adautocfg.cmd for db and apps (returned errors and can be verified at the following link)
https://DL.dropboxusercontent.com/u/60474194/adconfig%20apps.log
https://DL.dropboxusercontent.com/u/60474194/adconfig%20dB.log
I'm not a technical professional and unable to solve the problem, please help
Problem solved
-
We are facing problems of physical memory to the hp Server model: HP Proliant ML350G6 with windows server 2008 standard 32-bit.
The memory of the system installled is 22 gb but showing physical memory is 4095 MB only.pls give me the solution for this.* original title - NOT of the PHYSICAL MEMORY MONTRANT CORRECTLY *.
According to this the max is 4 GB for this version and 32 GB for 64-bit. You need to install 64-bit
-
installation of Weblogic Server 10.3.2 on Windows Server 2008 R2 x 64 64-bit?
Hello
I am trying to install the 64-bit version of Weblogic Server 10.3.2 on my Windows Server 2008 R2 SP2 64-bit operating system.
First of all, I downloaded "jdk-6u24-windows - x 64 .exe" and installed on my 64-bit platform.
I downloaded "wls1032_generic.jar" and try to install it by the command below
"java-d64-jar wls1032_generic.jar".
However, I received the message below
Unrecognized option:-d64
Could not create the Java virtual machine
All options on this problem. Where am I wrong?Hello
You must ensure that the following things:
(1) If you want to run your WLS on L 64-bit mode, then you must use the generic installer Jar example: * "java-jar wls1032_generic.jar" *.
(2) the pot above must be installed using only a 64-Bit JVM so that all libraries in 64-bit will be available with the WebLogic when installing it. Then first download a 64-bit JVM Woindows Inbox.
Then simply run the following command to check if the JVM is 6 t 4 little or not:
Set JAVA=HOME=C:\My64BitJDK\jdk1.6.0_21* $JAVA_HOME\bin\java-version *.
(3) you can now start your setup of WebLogic as follows:
* $JAVA_HOME\bin\java-jar wls1032_generic.jar* -
11.1.0.7 on windows server 2008 64-bit client installation failure
Hello!
I want to install the Client 11.1.0.7 (for windows server 2008 64-bit) on WIndows server 2008 (64-bit, R2), but it does not work.
Error I got Universal Installer when I run the installer to the Client software.
-------------------------------------------------------------------------------
1 - checking ooperating system requirements...
Expected result: a 5.0, 5.1, 5.2, 6.0
Actual result: 6.1
Problem: Oracle Database 11 g is not certified on the current operating system
Recommendation: Make sure that you install the software on the correct platform
2 - checking service pack requirments...
Full version. The result of this review is: not running
YES-18001: 'version WIndows vista 6.1' operating system is not supported
Recommendation: Install the recommended Service Pack.
-----------------------------------------------------------------------------------
However, when I install the Client 11.1.0.7 for windows server 2008 (32-bit), it works well.
I don't really understand why the Client does not work on Windows Server 2008 (64-bit).
Can someone help out me?
Thank youProblem: Oracle Database 11 g is not certified on the current operating system
What is your problem? The message seems clear. Windows 2008 Release 2 (important here is Release 2) requires 11 GR 2 is not out yet for any Windows platform.
http://www.Oracle.com/technology/tech/Windows/index.html
Werner
-
All 32-bit applications crash with error 0xc000005 after windows Server 2008 R2 backup
Hello world...
I am in a big mess... and really need help!
I did last night a Backup windows... but one of my users were connected to the server works with applications...
and this morning No 32 no bits applications... same installer...
the 64-bit application works very well...Others or generating an error 0xc000005 and stop...
failing Ole32.dll module...And I'm sure that the backup is reliable, even if the backup of windows said it was successful...
I tried to restore only the apps files... but it seems more complicated than that...
If anyone has an idea...
Hi, Emeric,.
Thanks for posting the question on Microsoft Community.
According to the description, it seems that 32-bit applications crash with an 0xc000005 error code in Windows Server 2008.
As the question more appropriate forums Technet, write the topic in this forum for better support.
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
Using the windows-related issues feel free to post on Microsoft Community.
-
Installation of Windows server 2008 on Poweredge R320
Hello everyone
We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.
I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.
We found no Raid 0 disks
1 Vitrual disk (s) were found.
I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloadedSAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment
The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe
I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.
nodev.inf
percsas.inf
I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.
Thank you very much
Goudeuk
Even I have the same problem... Can anyone suggest a solution?
Thank you
Scott
http://www.vmexplore.com
-
PowerEdge 2600 and Windows Server 2008 R2 installation problem
Hello.
I have a Dell PowerEdge 2600 server. Here is the configuration:
BIOS version: A14
2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)
4 x 1 GB of RAM
2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1
6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration
Firmware for the PERC 4/Di 2.52D
It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.
Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.
I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?
I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.
Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.
Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.
Thanks in advance.
The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:
- The 2600's chipset does not support ALL 64-bit processors
http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller - No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx - 2003 x 64 is not no more, which would be if 64 bits have been supported all the
You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.
"2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."
16-bit applications are not supported in 64-bit operating systems:
http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx - The 2600's chipset does not support ALL 64-bit processors
-
Do you have Oracle Fusion Middleware Infrastructure Installer 12.2.1 and content Webcenter 12.2.1 Support windows server 2008 R2?
Hi Saif,
This is not supported for the content... Please check the certificate of the MOS
Support content 12.2.0.1 MS x 64 64 bit 2012 and 2012R2 and same is applied to the installation of Oracle Fusion Middleware Infrastructure program.
Thank you
Amey
-
T61 4 GB RAM on Windows Server 2008 64 bit problems
Hi, I just bought 2 * 2 GB Crucial PC5300 667 Mhz memory to upgrade my T61 that has 2 * 1 GB installed before. Hardware installation is smooth and easy, I followed all the steps in the maintenance manual. Then I restart the computer, BIOS can recognize that it has 4096MB ram installled. My operating system is Windows Server 2008 Enterprise 64-bit, which, unlike these 32-bit system, I am sure that it can handle more than 3 GB of memory. It is found in the system, and and showed there is 4 GB of memory, but in other programs like Everest, CPU - z, or Photoshop, even in the task manager all told me that there are only 2 GB of memory.
I was confused and thinking that it might be the Crucial problem of the new memory, then I install only a SINGLE memory of 2GB each time. They can enter the system and be recognized as 2 GB. So the new Crucial memories have no problem. Then I combined the old 1 GB memory and new 2 GB Crucial memory to boot. Windows can also recognize 3 GB ram but only 2 GB of it can be used.
It seems that 2 GB is the threshold of this system, any combination of greater than 2 GB can be recognized but cannot be used. However, it should not be like this since Windows Server 64-bit, theratically it can manage more than 512 GB of memory. That's happened? What should I do to remove this threshold? Windows problems? T61 problem.
BTW, I've updated the BIOS of the laptop to the latest version. 01/07/2008
This is the snapshot of the screen, my Windows is the Chinese version, but the crucial information is in English.
http://farm3.static.Flickr.com/2194/2949357419_857717624d_o.jpg
How dramatic is... It seems that I can use all 4 GB right now. I made a few changes and changes of the last
Boot, however I don't know that we are contributing to the problem.
During the last closure, I
(1) switched the 2 Crucial memory slot,
(2) put on the battery (it has been disconnected since the first time I changed the memory).
(3) disabled windows virtual memory (now my laptop only works on real RAM, Yes...)
something like this works now, thank you wjli2!
-
How to create DSN on Windows Server 2008 R2 64 bit 32 bit
I've created System DSN using the SQL Native Client ODBC DSN name does not invite to the screen of the database option during the installation of the VMware Update Manager utility in vCenter Server 4.1
vCenter server 4.1 is irunning on Windows Server 2008 R2 64-bit in which SQL Server 2008 R2 is installed.
Please help how can create 32-bit DSN for VMware Update Manager. Screenshots are attached to the post for referance.
-
Cannot install the vCenter 4.1 on Windows Server 2008 R2 Enterprise Edition 64-bit
I have a brand new installation of Windows Server 2008 R2 Enterprise Edition 64 bit, but when I try to install vCenter Server 4.1, I get a window with the message following (screenshot attached):
This product can only be installed on operating systems for 64-bit at the following address:
Windows XP SP2 or higher
Windows 2003
Windows 2008
I checked the compatibility matrix before I started and he says vCenter 4.1 is compatible with Windows Server 2008 R2. I checked the community boards and the knowledge base but have not met anyone else having this problem. Am I missing something, perhaps a Windows role or service before installing vCenter necessary?
Is it a controller AD? You can not install vCenter Server on an AD DC.
André
Maybe you are looking for
-
Linux Mint - no adjusting brightness on Satellite L45-B4182SM
Hello world I recently bought a L45-B4182SM and I switched from Windows to Linux Mint 17 8.1. Everything seems to work properly. However, brightness (F3 and F3 keys) control do not work. I would like to know if anyone has faced this problem before, a
-
We just bought a new iMac. The apps that are used on iPhone or iPad is usable on the iMac? My daughter has apps on iPhone to my wife and our iPad downloaded from iTunes that she wants to be used on the iMac. Is this possible?
-
I think I have malicious spyware on my phone. Need help on what to do?
I think, there might be spy ware or other types of dangerous malware on my phone. Perhaps related to the apps or my accpunt, who need advice on what to do.
-
P300-sensitive keys unresponsive and stay on even when laptop turned off
Hello I have a P300 - 18M and the sensitive keys has suddenly stopped working, none of them are to be pressed (usually the light goes on). So I rebooted, and they were always the same. I can stop the laptop and the fires remained, even when I unplugg
-
automatic updates, it is absent, HELP!
I went through the steps in windows XP, I don't have any "automatic updates"