error starting forms and reports manageed servers on windows server 2008

Similar Questions

• WD Sentinel DX4000 is able to backup of servers running Windows Server 2008 R2?

  Community of Microsoft of Hello, I have the following problem:

  (1) I bought a 4 TB external hard drive to back up the servers running Windows Server 2008 R2

  (2) in order to back up servers in the external hard drive, I used the windows backup tool server

  (3) but the backup does not work and windows tool has shown a message output problem I / O

  (4) seeking to this topic, read xxxx

  (5) then went on the western digital site to check any storage which can back up servers

  (6) located the WD Sentinel DX4000 (http://store.westerndigital.com/store/wdus/en_US/DisplayProductDetailsPage/categoryID.59243300/subCategory.59245600/parid.59193300/catid.59243100)

  (7) but before I buy, I want to assure you that I will be able to connect the WD Sentinel DX4000 on servers and perform the backup or backup windows or Windows Storage Server 2008 R2 Essentials tool that comes in WD own Sentinel DX4000

  (9) also asked the technicians at Microsoft, but he could not answer with certainty.

  So I turn to Microsoft community to see if someone is using the WD Sentinel DX4000 to back up servers with windows 2008 R2 server successfully.

  Already, thank you for your attention.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Installation of Forms 11 g 64 bit on Windows Server 2008 64 bit

  Hello
  
  We are trying to install Forms 11 g 64 bit with WebLogic 64 bit on windows Server 2008 64-bit and followed by the short list of Jan Carlin:
  -installed the 64-bit JDK
  -installed WLS1032-generic
  -a started installation of forms/States
  Installation of the software worked fine and the part of configuration has created the field, but from the failure of area (hang).
  Information in the log file:
  =========================================================
  oracle.as.provisioning.util.ConfigException:
  Fehler beim Starten der field.
  Cause:
  Zeituberschreitung beim Starten von Admin_Server.
  Action:
  Weitere information, see Sie in den connects.
  at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
  at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
  at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
  at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
  at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
  at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
  at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
  at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
  at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
  at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
  at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
  at java.lang.Thread.run(Thread.java:619)
  
  ]]
  [2010-02-22 T 19: 37:39.730 + 01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B, 0] []
  oracle.as.provisioning.exception.ASProvWorkflowException: workflow runtime error.
  at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
  at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
  at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
  at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
  at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
  at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
  at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
  at java.lang.Thread.run(Thread.java:619)
  ================================================
  
  I read somewhere that the reason might be that the installation uses 32-bit JDK, but I don't know if I did something wrong.
  Somewhere else I read that the reason might be the path parameter, which may include some directories with emphasis in the name which could be a problem for Weblogic.
  
  No idea or help is appreciated.
  
  Thank you
  Mark

  Hello

  You have a directory containing c:\Program Files (x 86)-in your path?

  If so, set the PATH without this / these director (y) / (ies) before launching the setup.exe:

  Example:

  set PATH=%WINDIR%;%WINDIR%\system32
  Setup.exe

  Concerning

• Windows Fax and Scan "Sender Name" empty (Windows Server 2008 Standard)

  Hi all

  I am using Windows Server 2008 Standard (32-bit) with a RocketModem III card.  I have the latest drivers for the RocketModem.

  Using Windows Fax and Scan, I can send and receive faxes fine.  The only problem is when I see the fax, the name of the sender is blank.  I am trying to display the telephone number that someone sends me the fax to.

  I had thought it might also be under CSID, but everything I have complete options because it puts there.  I guess that means I want the CSID show for all those who sent faxes to me.

  It might be worth noting that I have active CallerID and you have a real fax machine that shows the incoming number very well.

  Does anyone have an idea where I could go wrong here?  Thanks in advance for the help!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• ESXi 3.5 and when trying to install windows server 2008

  I installed ESXi 3.5 on my server and successfully created a first virtual computer on which I am trying to install Windows server 2008 standard. I use VMware Infrastructure Client 2.5 from a Vista machine to access my virtual machine console.

  Installation of Windows server is an ISO file located in the root directory of the ESX Server data store. Everything went well with the installation until one last server restart showed a screen stating "the password must be changed before logging on the first time' by clicking on 'OK' present a login for 'Administrator' screen, asking me to enter a password for the 'new' and 'Confirm password '.

  Any attempt to enter a new password results (up to 14 characters, mixture letter & number) in a message "unable to update the password, the value provided for the new password does not meet the requirements of length, complexity or the history of the area.

  As far as I know, I'm not usig a specific domain, have never been able to access Windows server 2008 to create an admin account. I don't know how to solve this problem. I am new to VMWare and Windows server 2008.

  Any suggestion to move forward and allow me to have access to the server via the console?

  Thanks in advance for your help, Claude

  This isn't really a problem with VMware, but more of a problem of Windows 2008 password complexity requirements.

  The account that she is not asking that you must change the password is the local administrator account.

  And you have tried in upper case, lower case, numbers and special characters?  Something like Win2008!@#$ maybe?

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

• How the mirror system and boot partition (RAID1) in Windows Server 2008 and SATA disks

  looking to make a Windows Server 2008 to a desktop computer that meets all the requirements of Server 2008.

  I have 2 hard drives SATA 2 to identical installed. No RAID controller.

  Is this possible?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• How to install database 10g and forms and reports developer 10g?

  Hello
  How to install the database 10g and forms and reports developer 10g on windows xp 32-bit? and that one must first install? How to connect? where can I find complete guide

  Gul says:
  Hello
  How to install the database 10g and forms & reports developer 10g on windows xp 32-bit? and that one must first install? How to connect? where can I find complete guide

  This link will help you http://tahiti.oracle.com/

• Oracle Forms and reports OPMN OC4J_BI_Forms start, restart automatically.

  Hello

  We run Oracle Forms and reports 10g (10.1.2) virtual server Linux 5 in the test environment, using 5.5 ESXi.

  We have above question (Oracle Forms and reports OPMN OC4J_BI_Forms start and restart automatically) with this server, OPMN logs (ipm.log)

  below please help us solve this problem permanently.

  IPM. JOURNAL:

  15/07/24 11:23:06 [4] ask complete 2. Command: start

  15/07/24 11:23:55 [3] [libopmnoc4j] attempt to ping OC4J has expired

  15/07/24 11:23:55 [2] [libopmnoc4j] AJP13: error reading response AJP13

  15/07/24 11:23:55 [2] [libopmnoc4j] URL to Ping for proc: 1506214241 a failed ping url: / reports/rwservlet/pingserver? start = auto

  15/07/24 11:23:55 [4] [libopmnoc4j] process Ping failed: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:24:45 [3] [libopmnoc4j] attempt to ping OC4J has expired

  15/07/24 11:24:45 [2] [libopmnoc4j] AJP13: error reading response AJP13

  15/07/24 11:24:45 [2] [libopmnoc4j] URL to Ping for proc: 1506214241 a failed ping url: / reports/rwservlet/pingserver? start = auto

  15/07/24 11:24:45 [4] [libopmnoc4j] process Ping failed: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:25:35 [3] [libopmnoc4j] attempt to ping OC4J has expired

  15/07/24 11:25:35 [2] [libopmnoc4j] AJP13: error reading response AJP13

  15/07/24 11:25:35 [2] [libopmnoc4j] URL to Ping for proc: 1506214241 a failed ping url: / reports/rwservlet/pingserver? start = auto

  15/07/24 11:25:35 [4] [libopmnoc4j] process Ping failed: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:25:35 [4] [libopmnoc4j] inaccessible process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:25:35 [4] restart process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:27:35 [4] process shutdown: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:27:35 [4] [libopmnoc4j] with strength of the termination process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:27:37 [4] from process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:0)

  15/07/24 11:27:40 [4] living process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:10657)

  OC4J Log:

  ========

  --------

  15/07/24 11:38:29 stop processes

  --------

  15/07/24 11:38:29 closing...

  15/07/24 11:38:30 using the oracle.reports.util.EnvironmentGlobal class

  15/07/24 11:38:30 REP-56040: rep_abc_oracleas1 server already exists in the network

  --------

  15/07/24 12:14:55 start

  --------

  15/07/24-12:15 FormsServlet init():

  configFileName: /d01/oracle/OraHome_1/forms/server/formsweb.cfg

  testMode: false

  15/07/24 12:15 oracle Application Server containers for J2EE 10 g (10.1.2.0.2) initialized

  15/07/24-12:15:20 by using the oracle.reports.util.EnvironmentGlobal class

  15/07/24 12:15:27 ListenerServlet init()

  15/07/24-12:19:29 by using the oracle.reports.util.EnvironmentGlobal class

  java.lang.NullPointerException 15/07/24-12:19:32

  15/07/24-12:19:45 by using the oracle.reports.util.EnvironmentGlobal class

  15/07/24 14:03:19 session of shapes < 42 > abandoned: unable to communicate with the execution process.

  Kind regards

  Hello

  To resolve the error java you need to change ressemelable and java cache settings report error see the link already discuss

  https://community.Oracle.com/thread/847864?start=0&TSTART=0

  I hope it will be useful.

  Thank you.

• Error while installing Oracle 11 g under Solaris 10 SPARC 2 forms and reports

  We are trying to install Oracle Forms and reports 11 GR 2 (11.1.2.2.0) 64-bit Solaris 10 SPARC 64-bit (U9) and we are facing errors of installation during installation of 11 GR 2 forms. I will note down the environment and steps reproduced to produce errors:

  Environment:

  Operating system: Solaris 10 SPARC 64-bit (U9)

  JDK: Oracle 1.7.0_79 64-bit JDK

  WebLogic: Oracle WebLogic Server 10.3.6 64-bit

  Form & reports: 11.1.2.2.0 64-bit

  Steps to follow:

  1. install JDK - success

  2. installation of WebLogic Server 10.3.6 (64-bit) and created a new home of Middleware. -Success

  3. ensure that all prerequisites are met by a prior information of Oracle: http://docs.oracle.com/html/E25460_01/r2_fr_requirements.htm

  a. all patches necessary OS and packages are installed

  b. There are a lot of disk space, swap, TEMP space and memory (RAM live)

  c. all environment variables are cleaned, as indicated in the prerequisites in the URL

  d. no other product Oracle doesn't lie in the path except for the JDK. (NOTE: Forms 6i is installed in a separate House in the server.)

  e. all software are 64-bit

  f. the user oracle (same user who has installed the JDK and WebLogic) has read, write, and execute permissions for the entire House of Middleware.

  g. we set the LD_LIBRARY_PATH variable to $ORACLE_HOME/lib as indicated in the Doc ID 1643548.1.

  4. start the installer of Forms

  a. choose 'install only - do not configure ".

  b. all the prerequisite checks passed

  Errors: Installation product until it reaches approximately 92% when we get the first error:

  "Error in invoking target 'nnfgt.o' of makefile '$ORACLE_HOME/network/lib/ins_net_client.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".

  If we click on 'Continue' to work around the error, we get another error after that:

  "Error in invoking target 'repeat' of makefile '$ORACLE_HOME/precomp/lib/ins_precomp.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".

  Someone has met these errors before installing 11 GR 2 forms (11.1.2.2.0) on Solaris 10 SPARC 64-bit?

  Thank you

  Scott

  We have solved the problem. The library of expr has not found in/usr/xpg4/bin but in another location. After you create a symbolic link in/usr/xpg4/bin pointing to where it has been deployed, the installation is completed successfully (after removing the previous attempt failed).

  A test you can do to make sure that expr is working correctly is to run expr 1 + 1 in the shell. If the command works, the library can be found.

  Matthew, I thank you for your suggestions as well.

  Thank you

  Scott

• Setup error 12.2.1.0.0 forms and reports in windows 7 64 bit

  I try to install 12.2.1 forms and reports, but get the following error message when you select an Oracle Home.

  INST-07548: distribution selected only has not any type of compatible installation for the selected Oracle home.

  • INST-07548: distribution selected only has not any type of compatible installation for the selected Oracle home.
  • INST-07551: not all sets of dependent features to install type "Deployment of forms and reports" could be found. The following prerequisites proved to be missing: em_fmc - 12.2.1.0.0

  I installed 12.2.1 WLS production and the development of versions on a windows 7 64 bit machine and get the same error message against each Oracle home.

  Java 1.8.60 is the version of java installed.

  Ideas?

  It seems that you have downloaded and installed the maldistribution of WLS.  You must use the 'Infrastructure' distribution, which can be downloaded here:

  http://www.Oracle.com/technetwork/developer-tools/forms/downloads

• Installation forms and reports Services 11 g blocked the creation of OSH

  Hi gurus,

  I want to install Oracle 11 g 2 forms and reports.

  In the middle of the process it was stuck to the OSH of creation for about an hour as shown below

  

  The log file

  ....

  [2015 11-23 T 17: 35:05.454 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: transcribeTextFile] RETURN

  [2015 11-23 T 17: 35:05.454 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.provision.ohs.OHSComponentImpl] [SRC_METHOD: ohsProvision] backup to fill with the appropriate custom files

  [2015 11-23 T 17: 35:05.492 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.provision.ohs.OHSComponentImpl] [SRC_METHOD: ohsProvision] copy $ORACLE_HOME/OHS/icons * in $ORACLE_INSTANCE/config/OHS/icons

  [2015 11-23 T 17: 35:06.187 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.provision.ohs.OHSComponentImpl] [SRC_METHOD: addOPMNSnippet] ENTRY C:\Oracle\Middleware\Oracle_FRHome1\ohs\provision\opmnSnippet-OHS.xml

  [2015 11-23 T 17: 35:06.187 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.impl.OpmnConfig] [SRC_METHOD: insertSnippet] insertion of excerpt from C:\Oracle\Middleware\Oracle_FRHome1\ohs\provision\opmnSnippet-OHS.xml file in the component component ohs1

  [2015 11-23 T 17: 35:06.277 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.impl.OpmnConfig] [SRC_METHOD: persist] persistent opmn.xml (updated)

  [2015 11-23 T 17: 35:06.284 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.provision.ohs.OHSComponentImpl] [SRC_METHOD: addOPMNSnippet] RETURN

  [2015 11-23 T 17: 35:06.285 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: generateWallet] ENTRY

  [2015 11-23 T 17: 35:06.286 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: generateWallet] Generating self-signed Oracle wallet: portfolio = C:\Oracle\Middleware\FRDev\config\OHS\ohs1\proxy-portefeuille = false validity = 9125 hasPassword

  [2015 11-23 T 17: 35:07.193 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: generateWallet] RETURN

  [2015 11-23 T 17: 35:07.194 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.provision.ohs.OHSComponentImpl] [SRC_METHOD: onCreate] RETURN

  [2015 11-23 T 17: 35:07.194 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.provision.ohs.OHSComponentImpl] [SRC_METHOD: onCreate] RETURN

  [2015 11-23 T 17: 35:07.195 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: registerComponent] registration component ohs1

  [2015 11-23 T 17: 35:07.196 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.provision.ohs.OHSComponentImpl] [SRC_METHOD: registerComponent] ENTRY

  [2015 11-23 T 17: 35:07.196 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not set. isWebsphereEnabled = false

  [2015 11-23 T 17: 35:07.196 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnectionWLS] [SRC_METHOD: connect] creating connection to Hello at weblogic.management.mbeanservers.runtime

  [2015 11-23 T 17: 35:07.209 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.impl.AbstractRuntimeServiceConnection] [SRC_METHOD: invokeMBean] citing RegisterMBean operation: registerComponent

  [2015 11-23 T 17: 35:07.336 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnectionWLS] [SRC_METHOD: disconnect] break the connection to the mbean Server

  [2015 11-23 T 17: 35:07.338 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.provision.ohs.OHSComponentImpl] [SRC_METHOD: registerComponent] RETURN

  [2015 11-23 T 17: 35:07.339 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not set. isWebsphereEnabled = false

  [2015 11-23 T 17: 35:07.340 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.provision.ohs.OHSComponentImpl] [SRC_METHOD: reloadOpmn] ENTRY

  [2015 11-23 T 17: 35:07.778 + 08:00] [as] [TRACK: 16] [] [oracle.as.config] [tid: 14] [ecid: 0000L4neYLm5i ^ WFLzmJOA1MKhbc000005, 0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: reloadOpmn] Invoking opmn reload...

  The log output

  ...

  progress in computing progress4

  Task: from OPMN

  JL: About to call startOpmn

  JL: Entered startOpmn

  JL: Windows... About to run: cmd /c C:\Users\Fendy\AppData\Local\Temp\startallOpmn1448271298689.bat

  You try to start OPMN *.

  Execution of command *.

  cmd /c C:\Users\Fendy\AppData\Local\Temp\startallOpmn1448271298689.bat

  ***************************************************

  C:\Users\Fendy\AppData\Local\Temp > SET ORACLE_HOME = C:\Oracle\Middleware\Oracle_FRHome1

  C:\Users\Fendy\AppData\Local\Temp > C:\Oracle\Middleware\FRDev\bin\opmnctl.bat CALL startall

  opmnctl startall: from opmn and managed all process...

  progress in computing progress4

  Task: Creation of OSH

  Appreciate any help.

  Kind regards

  Ferrere

  Hi Craig

  Able to fix it by disabling the software AV.

  Kind regards

  Ferrere

• Tutorials Oracle Forms and reports

  Hi all

  I recently started a new job in collaboration with Oracle forms and reports using PL/SQL. I have little or no experience with either, I'm looking for some tutorials online. I found the following on Udemy me begin with PL/SQL - <-moderator removed link as we do to the business side--> but I find it difficult to find some tutorials on Oracle forms and reports. Can anyone suggest where I might find some good tutorials?

  Thank you

  -Action Moderator: removed link to a commercial side. The user don't please add links to commercial messages to any forum OTN in side. -----

  Tutorial Oracle...

  Although the first two of the following links are for older versions of forms, the concepts are still valid for all versions of forms.

  A tutorial on Oracle9i forms and reports

  http://www.holowczak.com/Oracle/dev9i/ iSelfSchooling - Introduction to forms Oracle Forms

  10g: demos, tips, and Techniques

  http://SheikYerbouti.developpez.com/index_en/

  http://www.SlideShare.NET/magupta26/Oracle-Forms-tutorial

  http://www2.cs.uh.edu/~ceick/3480/Customized_Oracle_Forms.pdf - create custom Oracle Forms

  http://www.youtube.com/watch?v=0BBiHvHzPYE - video

  Tutorial for Oracle reports...

  Here's some link...

  1. http://docs.oracle.com/html/B14364_01/title.htm

  2. http://www.scribd.com/doc/3960412/Basic2-Oracle-Reports-10g-Tutorials

  3. http://report10gsanamqa.blogspot.com/2010/08/triggers-in-reports-types-of-triggers.html

  Video tutorial

  http://www.YouTube.com/watch?v=Fum3MJm5yKU

  Hope this helps,

  Hamid

• Oracle Weblogic Server Configuration failed - new domain creation failed for 12 c forms and reports

  My machine is windows 7 64 bit with java 1.8_0_65.

  I installed the following in the following order:

  WLS 12.2.1.0.0 for developers (fmw_12.2.1.0.0_wls_quick_Disk1_1of1)

  WLS 12.2.1.0.0 Infrastructure (fmw_12.2.1.0.0_wls_infrastructureDisk1_1of1)

  Created the metadata repository

  Forms and reports 12 c (fmw_12.2.1.0.0_fr_win64_Disk1_1of1)

  Now I am trying to create my domain name for the development of forms/States and receive this error message.  It's the tail of the log file (the full file is attached):

  2015-11-04 08:37:45, 324 com.oracle.cie.domain.DomainGenerator SEVERE [71] - domain creation failed!

  Location of area: C:\orant\wls1221\user_projects\domains\alio_dev

  Reason: null

  Exception:

  Traceback (innermost last):

  "< Iostream >" file, line 37, in there?

  sun.misc.InvalidJarIndexException: invalid index

  to sun.misc.URLClassPath$ JarLoader.getResource (URLClassPath.java:1103)

  to sun.misc.URLClassPath$ JarLoader.getResource (URLClassPath.java:1013)

  at sun.misc.URLClassPath.getResource(URLClassPath.java:212)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:365)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:362)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:361)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:424)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:331)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:357)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName(Class.java:264)

  at org.python.core.SyspathJavaLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:357)

  at org.python.core.Py.findClassEx (unknown Source)

  at org.python.core.SysPackageManager.findClass (unknown Source)

  at org.python.core.PackageManager.findClass (unknown Source)

  at org.python.core.SysPackageManager.findClass (unknown Source)

  at org.python.core.PyJavaPackage.__findattr__ (unknown Source)

  at org.python.core.PyObject.impAttr (unknown Source)

  at org.python.core.imp.import_next (unknown Source)

  at org.python.core.imp.import_logic (unknown Source)

  at org.python.core.imp.import_name (unknown Source)

  at org.python.core.imp.importName (unknown Source)

  at org.python.core.ImportFunction.load (unknown Source)

  at org.python.core.ImportFunction.__call__ (unknown Source)

  at org.python.core.PyObject.__call__ (unknown Source)

  at org.python.core.__builtin__.__import__ (unknown Source)

  at org.python.core.imp.importFromAs (unknown Source)

  at org.python.core.imp.importFrom (unknown Source)

  to org.python.pycode._pyx31.f$ 0 (< iostream >: 37)

  to org.python.pycode._pyx31.call_function (< iostream >)

  at org.python.core.PyTableCode.call (unknown Source)

  at org.python.core.PyCode.call (unknown Source)

  at org.python.core.Py.runCode (unknown Source)

  at org.python.util.PythonInterpreter.execfile (unknown Source)

  at org.python.util.PythonInterpreter.execfile (unknown Source)

  at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1639)

  at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1457)

  at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1439)

  at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:86)

  at com.oracle.cie.domain.DomainGenerator.run(DomainGenerator.java:449)

  at java.lang.Thread.run(Thread.java:745)

  sun.misc.InvalidJarIndexException: sun.misc.InvalidJarIndexException: invalid index

  Traceback (innermost last):

  "< Iostream >" file, line 37, in there?

  sun.misc.InvalidJarIndexException: invalid index

  to sun.misc.URLClassPath$ JarLoader.getResource (URLClassPath.java:1103)

  to sun.misc.URLClassPath$ JarLoader.getResource (URLClassPath.java:1013)

  at sun.misc.URLClassPath.getResource(URLClassPath.java:212)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:365)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:362)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:361)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:424)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:331)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:357)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName(Class.java:264)

  at org.python.core.SyspathJavaLoader.loadClass (unknown Source)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:357)

  at org.python.core.Py.findClassEx (unknown Source)

  at org.python.core.SysPackageManager.findClass (unknown Source)

  at org.python.core.PackageManager.findClass (unknown Source)

  at org.python.core.SysPackageManager.findClass (unknown Source)

  at org.python.core.PyJavaPackage.__findattr__ (unknown Source)

  at org.python.core.PyObject.impAttr (unknown Source)

  at org.python.core.imp.import_next (unknown Source)

  at org.python.core.imp.import_logic (unknown Source)

  at org.python.core.imp.import_name (unknown Source)

  at org.python.core.imp.importName (unknown Source)

  at org.python.core.ImportFunction.load (unknown Source)

  at org.python.core.ImportFunction.__call__ (unknown Source)

  at org.python.core.PyObject.__call__ (unknown Source)

  at org.python.core.__builtin__.__import__ (unknown Source)

  at org.python.core.imp.importFromAs (unknown Source)

  at org.python.core.imp.importFrom (unknown Source)

  to org.python.pycode._pyx31.f$ 0 (< iostream >: 37)

  to org.python.pycode._pyx31.call_function (< iostream >)

  at org.python.core.PyTableCode.call (unknown Source)

  at org.python.core.PyCode.call (unknown Source)

  at org.python.core.Py.runCode (unknown Source)

  at org.python.util.PythonInterpreter.execfile (unknown Source)

  at org.python.util.PythonInterpreter.execfile (unknown Source)

  at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1639)

  at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1457)

  at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1439)

  at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:86)

  at com.oracle.cie.domain.DomainGenerator.run(DomainGenerator.java:449)

  at java.lang.Thread.run(Thread.java:745)

  sun.misc.InvalidJarIndexException: sun.misc.InvalidJarIndexException: invalid index

  at org.python.core.Py.JavaError (unknown Source)

  at org.python.core.PyTableCode.call (unknown Source)

  at org.python.core.PyCode.call (unknown Source)

  at org.python.core.Py.runCode (unknown Source)

  at org.python.util.PythonInterpreter.execfile (unknown Source)

  at org.python.util.PythonInterpreter.execfile (unknown Source)

  at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1639)

  at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1457)

  at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1439)

  at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:86)

  at com.oracle.cie.domain.DomainGenerator.run(DomainGenerator.java:449)

  at java.lang.Thread.run(Thread.java:745)

  2015-11-04 08:37:51, 245 [17] INFO com.oracle.cie.wizard.gui.tasks.OutcomeSummaryGUITask - classes of assistance provided to customize or control the add-on on Panel Summary result

  I am able to create a normal adminserver domain without any problem.  I can't simply create a field for the development of forms and reports.

  What Miss me?  Thank you!

  I have it.  It wasn't for lack of loopback adapter or the path.  I need to install the full version of wls, not the quick developer version.

• Hi I am new to Oracle forms and reports I want to know the differences between the Enter query mode and Normal mode?

  Hi I am new to Oracle forms and reports I want to know the differences between the Enter query mode and Normal mode?

  Welcome to Oracle Forms!  Out of curiosity, what do you mean by 'new '?  You are a student or new to an organization that uses Oracle Forms?  Or just play with Oracle Forms to learn something new?

  Let me start by saying that many of your questions designtime can answer by searching in the help of the constructor of the form library.  It's accessible, like most of the other products in the Builder menu > help.

  Regarding your question, ENTER QUERY mode, as the term implies, is when it is in a State where it is accept input for the execution of a query.  When in this mode, there are various restrictions.  Yet once, it will find more details in the Builder Help.  In this case, search help for these two subjects, "SYSTEM." MODE'and "built-ins comments that are not allowed in the input query Mode".  There are many other pages that contain information about the ENTER_QUERY method, but these two should help you get started.

  Normal mode, as its name implies, is when it is in a State of 'normal '.  Basically to do nothing in particular, but also not in ENTER QUERY mode.  In this State, you can move the shape, INSERT, UPDATE, DELETE, documents, etc..

  You will find additional information, as well as a lot of documentation on the product page of forms of OTN:

  http://www.Oracle.com/technetwork/developer-tools/forms