installation of gagets on windows 7 on a 64-bit machinge

Similar Questions

• TOSHIBA Libretto SD Card - gel after the installation of the SP3/Windows Update

  Hello

  Since the installation of SP3 via Windows Update on a new installation (Original Toshiba Recovery CD) my card reader SD freezes Windows after putting the card in the slot.

  The card is OK and formatted.

  Besides updating windows doesn´t work more.
  I´ll to pass the message on the updates, and the installation stops.

  The patch couldn t be installed because there is a problem with the computer.

  I m of the Austria and I translate to English.
  Hope you can read and understand it - perhaps someone has a solution.

  Best regards

  Ingo

  Published by: ADMIN

  Hello Ingo

  Last days, we read more similar reports on the various problems after installing SP3. As far as I know that Toshiba has faced similar problems after SP2 release and updates were offered. The fact is that SP3 has a negative influence on the different drivers and Toshiba has designed tools and utilities.

  For now, Toshiba has not any update and we need to see what will happen in the future. I always use SP2 and do not have similar problems on my laptop satellite.

  Or you can live with it and wait for update or restore BONES on time earlier and remove SP3.
  I see no solution at the moment.

• Installation problem w / 10 Windows on end 2015 27 "iMac retina

  I used boot camp and it installs windows 8.1 very well. When install updated to 10 from inside windows 8.1 windows or try a cleanup of 10 windows using boot camp, he gets at some point and I see a black screen and it does not go any further. Why Windows 8.1 installs fine, but not windows 10? I have the model with the hard disk of 1 TB in it.

  I have the same model as you, and I just spend the whole day trying to solve that, more than an hour on the phone with Apple support. Here's what I learned.

  Apple support agreed with me that the problem is most likely a bad display driver (AMD?) in the last set of drivers for Boot Camp. Unfortunately, Windows 10 compatibility for the end iMac to 2015 has been added only last month, so there would still be easily bugs in drivers. The result is that Windows is unable to turn on the display when the Boot Camp drivers are running, but cannot when the default system drivers are running. That's why we could still install Windows and boot to the desktop at the very first (until Boot Camp installed drivers).

  Support has also suggested that the new update of El Capitan 10.11.2 could contribute to the bug, but he was not sure about it.

  From my experience, the following will not solve the problem:

  • Reset the PRAM
  • Reinstalling Windows (bad drivers should I not get removed)
  • Using the Windows system restore
  • Install Parallels (you cannot yet touch the drivers)

  The only remaining thay of possible solutions have been discussed on the phone are:

  • Enter Windows 10 safe mode (very difficult, unless you hard reboot and reset the PRAM repeatedly) and uninstall the graphics card drivers or install the latest AMD drivers
  • Remove your Windows partition reinstall from scratch and refuse installing Boot Camp drivers when it comes to the top

  If you try one of these solutions, please let us know if it works.

  And if someone could tell me please how to guarantee to be able to boot in SafeMode Windows 10, it would be greatly appreciated. For the record, F8 and SHIFT + F8 are very likely to work.

• Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  I managed to install the deployments of work to the target machines. However, I expected to see the classified facility "My TestStand system" in my Start menu, but it is not. Am I misunderstanding something here?

  Also, if I do another target second deployment to the station as "My TestStand system B", all LabVIEW files in my previous installation for "My system TestStand" disappear from the directory (c:\Program Files\My TestStand system) target.

  I use TestStand Professional 4.2.1 on Windows XP and LabVIEW 2009 development station.

  Thank you Paul,.

  That solved my second problem and inspired me to look deeper for the response to my first problem. The answer lies in the tab 'distributed file","Installer properties' box 'create a program item:

  

  Wouldn't be nice if it is automatically checked by default for main sequence files? Wouldn't also nice if "Upgrade Code" was regenerated automatically by default whenever we have saved the file *.tsd under another name?

  Thanks again,

  Eugene

• Installer of Modules of Windows - "WindowsWcpOtherFailure3".

  I have a laptop dell inspiron 1720 (PC X 86 - Based) 4.0 GB RAM with Windows Vista Home Premium (32 bit), SP2 installed (6.0.6002 SP2 Build 6002).
  My problem is that I noticed two events in my "problem reports", showing "Windows Module Installer - WindowsWcpOtherFailure3". I never received any error at the time of the incident, I just accidentally he found everything while browsing my "problem reports". Here's the full description:
  
  Signature of the problem
  Problem event name: WindowsWcpOtherFailure3
  OsVersion: 6.0.6002
  File: base\wcp\sil\merged\ntu\ntsystem.cpp
  Function: Windows::Rtl:SystemImplementation:DirectRegistryProvider:SysEnumerateKey
  Line: 3724
  Status: c000009a
  StackHash: 0xf383468d
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Files helping to describe the problem (some files may be is no longer available)
  poqexec.log
  CBS.log
  CBS. Persist.log
  SCM. EVM
  FilterList.log
  minidump.mdmp

  I was not installing anything at the time of these "problems". In fact has occurred after that I fell asleep. I ran Disk Defrag last night around 01:00 and went to sleep, then this incident occurred at 02:33. My past computer activities consist of the installation of two cards DIMM 2.0 GB new, (two cards of 1.0 GB DIMM upgrade). After installation, I made diagnostics, ran test extended memory and everything going on. I have also received 8 updates from Windows Update aprox. two hours before I started having this "problem of the event. 7 of the 8 installed updates. I think that one of the updates has caused to happen. I entered "Services" from the start menu... it say windows setup is set to automatic and not running. Should I start the service and maintain, even if im not to install anything? Please help and if possible, please explain why this "problem event" occurs when Im not install or download anything either. Finally, I ran scans of complete system by Norton and Windows Defender, nothing 'undesirables' in the computer and Disk Defrag is done.

  Thank you for taking the time to answer. I really appreciate it!
  I don't know why JohnD - Support Engineer, MSFT, moved my "question" in the Windows Update Forum, when I put here. As I said in my original question, I have nothing installed not at this 'problem '. In fact, all of my updates appear to install correctly, (other than SP2, I've had to reinstall a clean version of Vista to do). I was sleeping at the time of the last problem report, so I know that I was not install because I was not awake, and no updates are displayed at the time of the problem.
  In any case, Microsoft helped me and I believe it's now corrected... at least temporarily. In the past, I got errors about "CBS". For this reason, microsoft has me do the following:

  Open command prompt
  run as administrator of
  type fsutil resource setautoreset true c:\

  you will receive a message that he managed. This seems to have worked far... No. so many errors or the reports about this problem... Thank you once again for trying.
  Billy Ganoe

  P.S. - Hope this will help someone else!

• HP Proliant ML350G6 with windows server 2008 standard 32-bit memory system installled is 22 gb but the physical memory is only show 4095 MB

  We are facing problems of physical memory to the hp Server model: HP Proliant ML350G6 with windows server 2008 standard 32-bit.
  The memory of the system installled is 22 gb but showing physical memory is 4095 MB only.pls give me the solution for this.

  * original title - NOT of the PHYSICAL MEMORY MONTRANT CORRECTLY *.

  According to this the max is 4 GB for this version and 32 GB for 64-bit. You need to install 64-bit

• My system installs the updates of windows, whenever I stop

  My system installs the updates of windows, whenever I stop.  What should I do to prevent this?

  See: http://support.microsoft.com/kb/910339 . All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Windows XP installation software to reinstall windows?

  I have a dell computer with Windows XP Home on the side product key.  How can I get the installation software to reinstall windows?

  Dell should have provided you with a Windows XP Recovery CD or recovery hard disk partition. You check specific instruction manual. At least on some Dell compters the procedure press the F8 key during the boot process.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Why Windows Vista Home Premium 32-bit installs not Windows updates?

  I am not able to download and install Windows Vista Home Premium 32 bit windows update.  This Gateway laptop has always been able to quickly and easily install the update by clicking windows update.  However, since the introduction of Windows 10 it has been a lot of your time trying to install updates.  I had this same problem with Windows 7 too.  Never before there was no problem for the two operating systems.  Installation of Windows updates has always been easy and fast without any problem.  Running the troubleshooting isn't good and hunting error codes has been unproductive.  What the hell is happening?

  Hi Joe Cool1:

  'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems.  The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.

  There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista.  The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.

  You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/.  Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.

  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• my laptop came with windows media center vista 64-bit, please help to install the same OS that I don't have installation dvd or I restore partion work.

  I bought the laptop United States & the model no is Pavilion dv4-1120us. Pls help me to restore or to get my system back BONES & also let me know if I can upgrade to windows 7 or not, once I am able to recover my original OS.

  Hi Pavan,

  Please answer these questions so that we can properly diagnose the problem, and to help you, as a result.

  1. the operating system does not work properly? What exactly is the problem you are having?

  2 did you receive any disk partition recovery with the computer?

  I suggest you contact HP support to obtain the recovery partition disk and for aid to restore the computer to its factory settings.

  If you want to re - install Windows Vista, check out this link:

  Installation and reinstallation of Windows Vista
  http://Windows.Microsoft.com/en-in/Windows-Vista/installing-and-reinstalling-Windows-Vista

  If you want to upgrade to Windows 7, see these articles:

  Upgrading to Windows 7
  http://Windows.Microsoft.com/is-is/Windows7/products/upgrade

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-in/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Please get back to us with the results.

   

  If you have questions about Windows operating systems, help us on this forum. We are happy to help you.

• How to get a windows Vista Home Premium 32-bit installation disc?

  My computer is an emachine T5086.  It has Windows Vista Home Premium and when loading drivers they stop loading at "windows32 drivers/crcdisk sys. I don't know what that means.

  Then, the computer restarts and asks me to install my windows installation disc for repairs.  F8 on reboot is not available as an option.  I don't have a repair option I turn on the computer and hold down the F8 key manually.  I don't have a windows disk or recovery disk and I can't to where I can find a restore either point.

  How to make a windows Vista Home Premium 32-bit installation disk?  I have my product key. Or where can I get one?

  Hello

  There are different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact the manufacturer of your computer, eMachines and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://www.eMachines.com/EC/en/us/content/home

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• Windows could not complete the installation. To install Windows on this computer, restart the installation

  Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears

  "Windows is unable to complete the installation. To install Windows on this computer, restart the installation.
  How should I solve this problem?

  Hello

  1. may I know the exact error you received during initialization failed prior to relocation?

  2. do you know the exact reason for the failure of start?

  I will be asked to get in touch with the manufacturer of the system on this issue.

  Installation and reinstallation of Windows Vista, you can fallow the article below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3

• Installer of Modules of Windows Vista - Windows has stopped working... Configuration 3 of 3 to 0%

  original title: Windows Vista Ugh.

  I have Windows Vista Home Premium on a laptop Gateway. I get the installer of Modules of Windows has stopped working and has been the error message closed as well as the configuration 3 of 3 0% starting upwards.  Thank God the restart of death cycle is no longer happens, but it always appears when I restart/start my computer.  I have tried almost everything that I found online to fix this, and yet I still have these questions. I can not install updates to Windows due to the fault of the Windows Modules Installer every 3 minutes and I can't install SP2 even when I tried the 64 bit version of stand alone for my computer.  I literally a novel of installs failed in my history of windows because of this update and I constantly receive error messages when you try to install the update SP2 failed. I don't know what else to try now that I tried the system restore, and none of the dates are far enough for these errors go away.  Help, please.

  Check here the answer to the similar problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/popup-box-says-Windows-module-installer-has/ae2fbeba-6f15-4676-8ddc-9cd926a79730

  Tom Ferguson

  PS

  I've seen many references to Vista but Vista ugh is new to me. ;-)

  TF