I install Vista SP error 0x800B0100 andg get.

Similar Questions

• Used to install Vista SP2. error code 800705b 3 error_requires_interactive_windowstation

  I now tried installing Vista sp2 several times and get the above error message.

  I have Windows Vista Home premium 32-bit with Service Pack 1.

  I use Google Chrome as a browser and Kaspersky Internet security as a security suite.

  I have a Dell Dimension desktop computer about 6 years now with 1 GB of Ram & AMD Athlon 64 x 2 Dual Core Processor5000 + 2.6 GHz.

  Although I am British my windows operating system is in German.

  I tried a lot of different options suggested on google and Microsoft.

  I tried to install windows update, but that has not worked.

  I also downloaded the SP2 and system update readiness tool and tried to install again, which didn't work.

  I tried to install in safe mode. I did a clean boot and tried to install.

  I checked the registry for the vLight folder see if that was causing the problem, but there was no record vLight.

  I downloaded the Microsoft Fixit 50202 but still cannot install.

  I hope someone can help. All tips are welcome.

  Do you think we (or rather you) will be able to decipher this problem or are - it probably that I have to reinstall Vista and SP1, and then try again to install SP2...

  My #1 concern is the fact that your computer has been & still lacks so many updates of security reviews.

  • Support for Vista Service Pack 1 (SP1) ended on Tuesday, July 12, 2011. Computers still running Vista SP1 "will no longer updates [i.e., updates published after July 12, 2011 so you're now nearly three 3 years behind on security updates critical!]. from Windows Update"until SP2 has been installed (this will require several prerequisite updates be installed first).

  Even if we managed to get SP2 installed, there's a very good chance that one or several updates released since July 12, 2011 will not be able to install.

  Then there's the fact that your computer - and the data on it - has been at risk for so long.

  Therefore, the only way you can ever trust the computer sescurity again would be of formatting the hard drive - and then do a clean installation of Windows (Vista or Win7).

  See the poster in this thread and follow the instructions of (my) WHOLE (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If you need additional help with the clean install of Vista, please start your own new thread in this forum & advice: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the local computer, reputable and independent (i.e., not a "BigBoxStore") computer repair shop & let them do the work.

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

• Problems with Windows Vista update error code I get is Code: 80096001

  Hi gang,.

  I need help I can get at this point. I am currently working on a machine to a customer who had the rootkit zero.access top. The machine works like a champ, now that it is all clean; but for some reason any Windows Vista refuses to update. Let me mention the operating system before proceeding. The operating system is Windows Vista Home Premium 64-bit. When I try to run Windows Update, the machine has a total of seven updates to install; This is especially important and option. In the important section, the machine is trying to install a security update and that is 9. In the optional section, the machine is trying to install the driver as updates: video, network, etc. The PC is already running Service Pack2. The error code I get is: 80096001. I tried every fix that Microsoft recommends, even the Microsoft Fix It tool. Nothing seems to work. I had a simular problem before in Windows XP. If my memory is good, I had to go to the entry in the registry of Windows Update and apply a DWORD here, or something; I don't remember exactly what I did. I can tell you that I checked the registry and there is literally no key to change in Windows Update. Any help or advice would be great, this question is about to drive me crazy.

  Thank you

  What's next for security/antivirus installed; is it's subscription and current definitions; has whatever it is detected the last time that the system has been scanned with it?

  You can reset the Windows Update components, but If the malware is present on the system update will still be blocked by the malware.

  (When was the last time you checked your system for malicious programs?)

  Suggest you try to have the system scanned both of the following in this order - do not jump...

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  (MBAM) Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html >

  How to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

  ESET Online Scanner

  http://www.eset.EU/ESET-online-scanner>

  Access the article KB971058 via Internet Explorer (only)

  If no malware is present - How to reset components Windows Updates?

  http://support.Microsoft.com/kb/971058>

  Download and Save the fix it 50202 from the page above.

  Close all the open browsers and programs prior to execution of the fix it.

  Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 19:30 on Friday, October 7, 2011

• Cannot install Vista SP1, error code "WindowsUpdate_80004004" "WindowsUpdate_dt000"

  Summary: I have bad installation of Vista SP1 and would be grateful for any advice, see details below.

  B A C K G R O U N D:

  I am running Vista Home Premium (32-bit version) and I need to upgrade Adobe create Suite 3 (CS3) to CS4. The problem comes from the fact that CS4 requires Vista Service Pack 1 (SP1) and I'm unable to install SP1.

  I really, really want to avoid storing new factory setting and re-install Vista... So, I would be very grateful if there is someone out there who could offer some advice to help me correct my current system with SP1, allowing installation both need the software Adobe CS4. Someone has an idea of what I might try next?

  E R R O R D E S C R I P T I O N:

  After trying to install the Vista SP1, I get the following under Windows Update error code: "WindowsUpdate_80004004" "WindowsUpdate_dt000" Leading to this following error occurs:

  1. SP1 is installed and Vista claims that it is correctly installed (it takes a few hours...)
  2. Computer is restarted and 3 updates are applied to the system. The first of these takes forever and housing is 98% completion for a few hours, not a sign of healty I guess...
  3. Computer is then restarted again (or maybe it goes directly from 2) 3) without a re-boot inbetween?) and now I am facing a window called "Start up repair" telling me "your computer is unable to boot"... here I just have to click Next and the computer now spends in the order of 45 minutes to fix the system. When it's done, Vista starts but without SP1 and Windows journal showing the unsuccessful attempt to install KB936330 entry more an upgrade.

  S Y S T E M C O N F I G:

  • HP Pavilion dv9000
  • AMD Turion 64 X 2 rocessor
  • 2 GB of RAM, 32-bit version of Vista Home Premium, no other OS
  • Trend Micro Internet security (antivirus and firewall)

  Vista updated with all updates high priority, except the following:

  • KB905866, error message "WindowsUpdate_80004004" "WindowsUpdate_dt000"
  • KB936330 (SP1), an error message "WindowsUpdate_80004004" "WindowsUpdate_dt000"
  • KB955430, "WindowsUpdate_800F0825" "WindowsUpdate_dt000" (note the difference)

  W H A T I H A V E T R I E D S O F R:

  Diagnosis of basic computer:

  1. run chdsk: OK
  2. the verification of memory: OK
  3. I also downloaded a Vista recovery disk and booted from the recovery disc. In this mode, I tried to repair Vista, but no error was found.

  I tried to install the SP1 with these configurations, all attempts to exactly the same error as described in detail above:

  • update of the "normal route" via automatic windows standalone
  • Downloaded the stand-alone SP1: unsuccessful (I read somewhere that has helped other users...)
  • disabled wifi: unsuccessful (I read somewhere that has helped other users...)
  • disable the antivirus and Firewall: unsuccessful

  That's all the advice?

  Thanks in advance,
  Peter

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems to install Vista SP2, error 0x80070bc9

  Hi Mick Murphy, I can't install SP2, although it should have been downloaded automatically until I'm having some strange problems with my Vista so I'm trying to verify that this update is installed correctly.  As it has been dated to 2009, I do not remember exactly but think I had a problem and claimed a record that never came.

  Anyway your connection link see that as a mistake!

  I tried a reboot before reinstalling clean but KB948465 gets up to now and shows then I think a mess of Ox80070bc9 error (sorry, but I'm starting to get confused by all of this.)  I then read to use the KB947821 Hotfix but who wants to install both versions at the same time;  Thus abandoned that.

  Help!

  CAV

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Vista-Service-Pack-2/53ceaa00-e86c-4636-9e65-533af2a5974c#LastReply

  Hello Christina,

  Apologize for the delay in response. I suggest that you try to reset the Windows Update components by running the difficulty it as mentioned in the following article and see if it helps:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If the problem persists, try the remaining steps in this article:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: The Chkdsk scan will try to identify and repair bad sectors on the hard drive. All the data on these areas could be lost in the process. The computer can also enter a no start condition.

  We know if you need help. We will be happy to help you.

• Cannot install Vista SP1, error 800F0816

  I reset my computer to factory settings. I went on the installation of the updates that come with, until the time came to Vista SP1. I did the thing, he started to install and when it restarted it sent me to the thing system restore and it has not stopped. I was forced to 'pull the plug' and reset my computer to its previous state before installing SP1. Everything was OK until I did my format. Could this be a problem, that I don't have my original graphics card and RAM on my pc (I have them again).

  What else could I give you, so that you can give me the best possible solution. I just want to know where the fault is and how to fix it. Even if I have to buy new hardware or something like that. Could it be, because I did a format and I have all the drivers and other updates, so that my computer crashes after I turn it on in the morning?
  I get error Code 800F0816, when you try to install the Vista SP1
  Thanks in advance
  Andres.
  Edit: The problem Signature:
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1061
  More information about the problem:
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8FE8CDF7
  BCP3: 8BB37A8C
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  I think I still have these files after restoring that describe the problem.

  Hello

  1. are you able to start your computer normally, now?

  2. Once you get the blue screen error?

  3. is your copy of Windows Vista active?

  Method 1:

  Step 1: Perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Step 2: Download and install a stand-alone copy of Windows Vista Service Pack 1.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  Method 2:

  Check the hard disk for errors.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3:

  Check the memory of your computer for any errors.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  I hope this helps.

• Impossible to install Vista SP2 - error 800f0900

  I run the update package and invites me to accept the license. It fails then after about 10 seconds with this error. I tried several times to install the service pack, including the stand-alone version. Other updates were installed fine.  I've disabled my AV (norton) software and closed all programs. I have cleaned the update of Windows, as shown in the steps "General Windows Update troubleshooting" and still get this error. I searched high and low for articles related, and that this error pops up regularly in previous discussions. I ran many times analysis tool, including a new on the list updated as recently as yesterday and I still have this problem.

  The system is a Dell Studio 1737 with 2 x 320 GB drives. No further questions. Help!

  Great help, thanks.  In any case, I found a day 1 Norton Ghost backup on DVD from when the system was brand new. I restored all files in the directory windows\servicing\packages for patches of two problem (955839 and 853839) and catalogues of CSI corrupted in windows\winsxs\Catalogs\

  The response was so corrupted files and installed SP2.  I would have found it much more quickly if, when the tool DONE, he actually TOLD me to look in the newspaper! I had taken a correct end of the update TO mean that she couldn't find any problems.  Seriously, I would put that!

• Cannot install Vista SP1: Error Code 2

  Each attempt installation of Vista SP1 fails: Error Code 2.  I tried everything that seems relevant on help and Support.

  Doug K

  Hi Doug K,.

  What is the exact error message received when the problem occurs?

  Method 1:

  You can try the steps from the following link and check if it solves the problem:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Method 2:

  You can try the steps from the following link and check if it solves the problem:

  Learn how to install Windows Vista Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Let us know if it helps!

• Used to install Vista SP2 / error 800f081f

  I saw various suggestions for this problem, but I tried them all, with no luck.  I installed SP1, I use webroot anti-virus/malware, and I am running Vista 32 bit.  I have tried to install this 50 times since last year at least!  Help!

  BerlinJudy,
  In addition to providing the requested information, try the steps below and let us know the results.

  Run the System Update tool

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PC will not install Vista Service Pack 2, it gets in the Middle then shows the Installation failed

  PC will not install SP2. = Gets to halfway and then stops with the message "installation failed." Can't seem to solve the problems there.

  Original title: Filure to install SP2

  Hi kerr523,

  Also the previous posts, please take a look at the article here about the troubleshooting problems when you try to install Service Pack 2.

  I hope this helps!

• Error 80073712 when installing Vista SP 1

  I can't install Vista SP1 - error 80073712.  I tried all of the corrective actions: System Update tool, download, save and install out of office and put out 3rd party security.  I don't have a Windows disc with my RESUME and I can't access my partitioned drive.  Any suggestions?

  MSicard,
  You can try Safe Mode Setup and see if it works.  However if you can not access your recovery partition you can get that fixed first.  This problem may need to install a repair to do, and you will need to access or a DVD of Vista on your partition recovery.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Problem re-installing VISTA after the removal of Windows 8 Preview Release, all I get is a black screen with a message "Not found operating system"

  I recently tried Win 8 on my VAIO laptop spare parts on which I ran Vista, after having previously deleted all the files and documents (I don't use often the laptop). Having concluded that Win8 will really work correctly with a touch screen (and the display size was bad as well), I uninstalled WIN 8, understand that I have to re - install Vista from my rescue disks. This I tried successfully a few months previously to make a clean reinstall. However, after removing 8 WIN via the Control Panel, I can't re - install Vista now. All I get is a black screen with a message "The operating system not found" and the rescue disks do not register. What can I do? I like Vista (although I now run Win 7 on my PC) and really want to put it back. Grateful for the advice.

  Well I finally fixed it by tweaking the BOOT BIOS settings and find something along the lines of VAIO Setup. I'm afraid, I just don't remember exactly what I did, but suddenly I found and ran 'VAIO Hardware Diagnostics' gave me a heart when it announced "no error was detected on the Vaio. Then I saw there was an entry for 'VAIO Recovery Utility - Recovery Wizard' and everything started to load. Since the 2 recovery discs I had. Finally, I ran MS Office and Small Business CD-ROM and now everything is back the way that it used to be. Here I had taken more note of how I got to the well Recovery Wizard. I hope that I never have to do it again!

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed.  Quickly fails after it starts with error 0x800b0100 in the system log.  It's a fully verified SP2 full download.  I did a full chkdsk /r who fixed some issues.  Removed AVAST.  A running Fix It tool that fixes the problem with crypt services.  Scanned for malware with MRT.  Scanned for malware with MalWareBytes.  Scanned for rootkit with the McAfee tool.  Run the sfc/scannow, that signals mistakes.  The CBS. Partial contents of the LOG file (see KB972036):

  2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
  2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
  2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
  2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized.  Reboot required: no
  2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
  2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
  2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized.  Reboot required: no
  2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
  2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.

  KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store

  System will not install KB972036 - States does not apply.

  Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit.  In addition, it specifies SP2 - which obviously I do not have.  But I manually downloaded the apparently correct tool and ran it - get does not apply.

  Hi John,.

  Apologize for the delay in response. Please try the steps as described in the following article:

  Windows Update error 800b0100

  Back to us for assistance.