Installation of HP Photosmart 7250 Fatal Error

Similar Questions

• PhotoSmart C6280 - fatal error during Installation

  I have Win 7 (64-bit) system and can not install the software for my C6280 all-in-One Printer.  I get a message "Fatal error during Installation" and then the software tries to uninstall.  During this process, a reboot is required and then the software tries to install again and it fails.  I'm in a circle without end of the installation-uninstall-install-uninstall...

  How to do this?  I want to uninstall completely all the software associated with this printer and then start over from the beginning.

  The issue that brought this situation was that I was getting the following message is displayed when starting:

  "There was a problem starting C:\users\Myron\AppData\Local\IsolatedStorage\HP\zelqof.dll.

  The specified module could not be found. »

  I guess the missing module would settle if I re - install all software associated with the printer as it is ONLY connected printer (USB) to the PC.

  Hello BigDog5280,

  Welcome to the HP Forums.

  I see that you have a problem with a loop uninstall/reinstall the software and drivers.

  If you have Norton 360 installed, please disable it and restart the computer.  When the computer is back on, try to reinstall with Norton 360 always off.

  Here is a link to a document that is on a Fatal Error ' error 1603. A fatal error occurred during installation "(MSI erreur 1603) poster in HP Software Installation in Windows "

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• Photosmart C4580 - fatal error during installation

  Today I received my AIO printer and expected (based on all the reviews on the product), it is an easy install and Setup.  NOT THE CASE! I'm going out of my mind and got NO help from HP Technical Support on this issue, even after 2 sessions online and a phone session.  I know it's a DLL problem and a tech tried to tell me it was my installation CD and he would send me a new.

  I get about 20% of the way through the installation of the software (with CD and download) and get a 'fatal error' message that says this:

  

  I tried to uninstall, stop, and then reinstall the two albums and a download and get to every time the same exact error message.  Can someone please PLEASE help?

  Message edited by juliedm66 on 30/12/2008 15:49
  Message edited by juliedm66 on 30/12/2008 15:52

  Waiting for an answer here, I decided to look for other threads and found an answer that worked by Andreas Rosenberg... As soon as I registered the dll mentioned below, I was able to install the software.  I just wanted to post here for other people who might have the same problem can have an answer that might work for them too!

  July 9, 2008 15:39:35 GMT unassigned
  The reason for the mentioned error is a missing or invalid to Atlant record. DLL.

  1.) check if ATL. DLL exists in the WINDOWS\SYSTEM32 directory. If it is missing, you must get it.

  2.) register the ATL DLL with: "start |" Run"and type"regsvr32 C:\WINDOWS\system32\atl.dll ".

  Try to install the printer software again.

• Photosmart C4400 Fatal Error download drive, Windows Vista

  Operating system: Windows Vista 32-bit

  Printer: Photosmart C4400 (I have had no other printer software on my computer)

  Problem: I can not download the driver (from the included CD) on my computer.

  Step 3/4, 94%, I get a fatal error Message:

  MSI. Scan

  Microsoft.vego.STL, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9alel8e3b" version = "8.0sc727.91", type = "win32".

  Error situation coade 20218093

  What I tried: disable the firewall, by downloading the reader from HP site, try the message error MSI listed on the HP site. All to nothing does not.

  What should I do to correctly download the driver? BTW: The printer works when I use a memory card.

  Thanks for all the solutions!

  try to download the latest version of msxml for windows, and then try to reinstall

• PHOTOSMART C7280 FATAL ERROR DURING INSTALLATION wStub 460504 WINDOWS VISTA

  DID NOT FINISH INSTALLING NEW SOFTWARE TO FIX THE HP SOLUTIONS CENTER NOT LOADING AND UNABLE TO SCAN

  Hi bob1830,

  Try the next method below and let me know what you find?

  Downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-52268-5&CC=US&DLC=en&LC=en&os=2093&Product=3204785&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. type % temp % in the field of race

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11. start the L4uninstall.exe

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• HP photosmart B8550: fatal error "-Stub""66186"»

  My printer has stopped printing.  The page came across as if it was printing to go, but it came out white.  I went to the HP website and went through the process of downloading and installation for the drivers, including all the troubleshooting steps where I should go to the system configuration of uncheck then check boxes.  This has not fixed the problem.  After several restarts and attempts to reinstall (even using what is called a Wizard), a window come suggesting that I come to this forum.  So here I am.  My printer is connected to my CPU by USB and is no longer supported by HP.  Should I give up and buy a new printer or is there something else I can do?  If more information is needed in order to help me, please ask.  Thanks in advance for your help.  Marian

  Welcome to the HP community @rinkly ,

  I read about your Photosmart B8550 impression now out of the white pages, and I wanted to share my own suggestions. I think that the problem is hardware related somewhere in the printer itself, so perhaps that's why troubleshooting software you tried has not solved the problem. There could be a failure of the print head and you might need another unit however, before determining that, try the troubleshooting steps in the guide I posted below.

  HP Photosmart B8550, B8553 and B8558 printers - faded colours or ternes in impressions

  If troubleshooting does not at all help, finally I would contact HP technical support to review your options of the printer with you.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  

• Fatal error when installing the Photosmart all-in-one software on Windows 7 x 64 for printer C4385

  Hello

  I had to reformat one of my laptops and as a result, reinstall the Photosmart software & drivers for my printer C4385. I downloaded the software from the HP website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76047-2&cc=us&dlc=en&lc=en&... =).

  However, during the installation, I get on a fatal error in the last step, "product Configuration".  I uninstalled and reinstalled several times with the same result.  As you can imagine, I am really frustrated and seeks help from the community to solve this problem.  Here is a screenshot of the error.  Your help in solving this problem is greatly appreciated.

  

  Hello

  I see that you have a problem with the printer.

  I suggest you to install the software one. Go ahead and uninstall the software first and then follow the instructions below.

  You should get to a point in the facility, which looks something like this. Please click on the area where the yellow arrow.

  

  Once you do, it will look like this. Please install each driver one by one, starting with the first options which is the printer driver. You have to disable each option, that some of these drivers will not let you uncheck which is very good.

  Once its finish, you can go back and do the following installation.

  

  Let me know the results.

• HP M175nw: M175nw fatal error during installation

  New HP Pavilion 500-223w.  Have a HP M175nw I'm migrating over an old pc.  Downloaded the latest drivers, HP etc.  Installation takes more than 30 minutes and in the end, I get "Fatal Error".  No code, nothing.  Went to the event viewer, still no code.

  I've updated the Firmware, rebooted the new PC and printer, still nothing.  He is still waiting at the end of the installation before giving me the "Fatal Error".   The only way I was able to use it is to have a repair shop to install the core files.  It would only print, no wireless, scanning, etc.

  dakota453,

  The commands are:

  msiexec /Unregister

  msiexec/regserver

  You can run these by going to the command prompt. Go to your search bar and type in the command prompt to access. Note the space after msiexec.

  The reason why I suggested the Microsoft Fix It was because you can choose the option that says something like "I will have problems with the installation or uninstallation of a piece of software.

  I've linked this document because the installer give you an unrecoverable error message. The document was designed for printers inkjet in mind, but the troubleshooting steps to solve this problem for Laserjet printers thus.

  If this does not solve your problem please let me know and we can try something else.

• Fatal error 1603 when installing my printer software. How can I fix it?

  When I insert the disk to install my printer, the installation is interrupted with the fatal error 1603.  What is the solution?  I use Windows XP.

  Hi rlbass,
   
  -What is the brand and model of your printer?
   
   

  Try to reregister the Windows Installer Service, and then install the product again by following this step:

  a. in the menu 'Start', click on ' execute:.»
  b. in the "Open" box type "msiexec /unreg" and then press ENTER.
  c. on the menu 'Start', click 'run '.
  d. in the "Open" box type "msiexec/regserver" and then press ENTER.

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package
   
  Check if this helps you.

• Windows error message: fatal error during Microsoft Office 2000 Setup

  Virus protection removed a Trojan horse.  Therefore, Office 2000 is damaged.  From Control Panel - Add/Remove program, I tried to fix it using the Office 2000 disc but it hangs as it tries to set up.  He ends up giving error - installation failed due to a fatal error. Operating system is Windows XP

  Office 2000 programs are working except cannot enter into Excel.

  Just fixed it.  I took the survey and decided to google the error message #1305.  Follow-up of the steps for error reading file to Microsoft Support http://support.microsoft.com/kb/248263

  Disk Cleanup and player.  It is loaded after the cleaning.  The cost of repair shop would have been almost the cost of the ultimate office for my new system.

  Bleak Morn & JoelJ1964 thanks.

• Cannot install Nero Multimedia Suite 10 platium update, getting fatal errors

  I have reinstalled this program at least 3 times. Nero download and installed great, but then there are updates for this program in Control Panel of Nero, then he tells me what updates I need. So it downloads updates without problem and then starts to their installation and immediately after the installation is complete, it says: fatal error during installation. I have Windows 7 Pro 32-bit. When I uninstalled Nero I used the mode of Iobit uninstaller to get rid of the remaining files. Tired of reinstalling as it did help more it takes a lot of time to do. I hope someone can help.

  Thank you.

  Glen.

  Hello

  I suggest post you the same question in Nero support and check if it helps.

  Nero Support: http://www.nero.com/eng/support-contact.html?ecid=etr.am...R10774

  Reference:

  Nero Multimedia Suite 10 Platinum HD - General Installation Notes: http://forum.my.nero.com/index.php?showtopic=7658
  Nero Multimedia Suite 10 Platinum HD - updated:
  http://www.Nero.com/enu/downloads-Nero10-HD-update.php

• HP Photosmart 6280 all-in-one: HP Photosmart C6280 all-in-One error - wstub 197370' «Fatal error during Installation»

  Hello

  I have a problem with my HP 6280 All in One Printer. There are a few problems and it's really annoying, I wonder if anyone can prove useful please?

  I uninstalled the software and drivers for the Photosmart series C6200 of the site, and when re installation, the software starts uninstalling itself and gives the following message:

  "Error - wstub 197370'

  "Fatal error during Installation"

  And then starts to uninstall the entire software package and then request to restart to uninstall complete.

  Once restarted, the whole scenario goes in a loop that is the uninstall process? Very confusing indeed and have never experienced this kind of problem before!

  All advice is appreciated.

  Best regards, K

  Hi @k_san7,

  Welcome to the HP Support forum.

  I understand that you found "error - wstub 197370' and"Fatal error during Installation"messages when you try to install the software and drivers for the HP Photosmart C6280 all-in-One printer on your Windows PC 7." I would like to help with that.

  I searched our database for "error - wstub 197370' and did not find anything related, but I found some documents related to"Fatal error during Installation"errors." Here is a document that can help - Displays A 'fatal error' during HP Software Installation (Windows).

  I'll try to uninstall the software and printer drivers. Click here if you need help with uninstalling.

  Then I would erase the temp directory.

  1. tap folder in the field "search programs and files".

  2 Select all the files in this folder, and then press the delete key to remove.

  Once removed to close all windows and restart the computer.

  When the computer restarts, download and install the latest version of the software and the printer drivers.

  Here's a direct link to the software and drivers for Windows 7 - HP Photosmart series C6200 full feature software and driversprinter.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• All-in-One D110A Series: series D110a, fatal error installation problems

  Before our son using this printer at the school, he worked well at home for years.

  I am tired of the to put back, thinking it was already installed on my laptop, and all I needed to do is etup the wireless.

  Something went wrong when setting up wireless, someone walked the table and pulled off the printer power cord.

  Anyway, after that I could never set up the wireless, even after coming back to the default settings. I tried to uninstall all traces of the printer on the laptop and more. Now, I don't remember using a disk to set up a few years previously, only connect the cable USB and passing away.

  When you try this I get some of the elements of lines installed, but three lines who say Photosmart series would come to say no driver found. I tried to download the driver software manually, NG.

  Today, I just tried to use the hppiw.exe, the installation wizard, everything seems ok then I get a fatal error during Installation.

  Clicked by the guests, he even said at one point, a solution has been found, he did a report error report collection before that. Now, shows the following:

  Fatal error during Installation (no joke)

  Error 1935. an error occurred during the installation Assembly Microsoft.VC80.CRT, processor architecture = '86', publicKeyToken = "1fc8b3b9a1e18e3b", version = "8.0.50727.91", type = "win32". See Help and Support for more information. Then he said: go to the HP Support for troubleshooting on Fatal error and MSI. Scan.

  Fact some digging, checked I have a high end version of MS Installer (V.5.0.7601.18896).

  Any help will be appreciated.

  Thanks for your time.

  Well, a fatal error like this on Windows 7 is suggesting to an operating system problem. The following steps should be able to solve it.

  Click Start.

  In the search bar type cmd and press to enter.

  in the window that opens type "msiexec /Unregister" (without the quotes) and press ENTER.

  Type "msiexec/regserver" (without the quotes) and press ENTER.

  If you don't see anything except a new line will appear to type, you've successfully entered the correct line. Now:

  1. Click Start.
  2. In the search bar type in msconfig and press ENTER.
  3. Click the Services tab.
  4. Click Hide all by Microsoft.
  5. Click Disable all.
  6. Click the Startup tab.
  7. Click Disable all.
  8. Click OK and reboot your PC.
  9. Disable any antivirus, firewall and software security on your PC.

  At this point, you should be able to install the software. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Officejet J4680 question 'FATAL ERROR' on XP software installation

  I'm having a problem with the installation of the software for the Officejet J4680. I am running XP, and when it gets to 96% it seems to stall then later a bit shows a fatal error during the Setup error.

  The printer is installed and I can print (wireless) but when I click on the HP Solution Center a note appears saying "no HP devices have been detected. Solution Center HP close now. "Then, of course, the software has not installed correctly. I hope that this is a common problem that can be fixed quite easy.

  Thanks in advance for any help!

  Troubleshooting steps here can help.  There are also several updates and a new driver that was published a few weeks available for download from HP here.

• Fatal error during installation of HP Deskjet F2180 Solution Center

  Hello world!

  During the installation of the HP Deskjet F2180 Solution Center, it says "fatal error" - couldn t write the key to '\SOFTWARE' more 'MSI '. GPBaseService2"error.

  I tried several times to completely uninstall all this software and remove the key in regedit and reinstall it. I have also respected the order: first install, after that connect printer. HP Digital Imagiing monitor works but not enough iťs for me. Maybe there is a problem with permissions in Windows, who knows. I just installed Windows 7 Professional 32-bit.

  Could you help me to solve it, please? Each response pleases!

  Hello!

  I have solve it without help. A few key registry could not be written in \SOFTWARE, so I set the permission to write to this folder in regedit and it works!