Installation of IE9 causes my wireless to get lost

Similar Questions

• I want to install Windows XP on my iMac, but I can't find the installation CD. Is it possible to get another disc, since I already have the product key?

  I just bought an iMac and want to install windows xp on it with bootcamp. I want to load all my old files, photos, etc. on the Mac. I have the product key but cannot find the installation cd. Is it possible to get a cd without having to buy the whole program, or the upgrade again?

  original title: iMac pc

  How to replace hardware or lost, broken, or missing Microsoft software:
  http://support.Microsoft.com/kb/326246/en-GB

• Unit does not not after installation, missing drivers, dot know were to get drivers

  Unit does not not after installation, missing drivers, dot know were to get drivers

  George2222 (2) you were right. Problem solved, thank you.

• Installation 6 Lightroom from a disk and get an error message that says OS not met obligation / no support for Windows Vista.  Vista has never been loaded on this PC.  It is running Win7

  What installation Lr 6 to a disc, I get an error message that says OS obligation has not met.  Windows Vista not supported.  Vista has never been installed on this PC.  Operating system is Windows 7.  What now?

  Copy the installation files to a desktop directory.

  Right-click on the Setup file in this directory > click Properties > compatibility > win 7 > ok: Finally, double-click the configuration file.

• Hi, I bought and downloaded Adobe Pro, but when I reached installation and type my serial number, I get an error that it is inactive - can anyone help?

  Hi, I bought and downloaded Adobe Pro, but when I reached installation and type my serial number, I get an error that it is inactive - can anyone help?

  Adobe is a company that you bought?

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

• Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Download from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html.

• Error message the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  
  

  The error message happens chronically today.

  It does not matter what I try to install the air file.

  I uninstalled, cleaned the registry and all the usual things.

  And then re-installed-with the same error messages

  
  

  Windows 7. Current update.

  processor 2.8 ghz, 12 G Ram - one machine to cook breakfast and make the beds.

  
  

  
  

  " The application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. "

  
  

  
  

  This is the last log of installation-

  I am not able to find out how to decipher what it means.

  
  

  Someone would have noticed?
  

  
  

  [2015-02 - 18:10:58:58] Unpackaging/validation complete

  [2015-02 - 18:10:58:58] no app location to "LocalizerLeadsTool" appID and pubID "

  [2015-02 - 18:10:59:01] conversion of unpackaged to a native installation package in C:\Users\admin\AppData\Local\Temp\flaAA62.tmp application

  [2015-02 - 18:10:59:02] create an installation package Native failed: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "unhandled exception error: EndUpdateResource: error Windows #5" errorID = 0]

  [2015-02 - 18:10:59:03]

  I got a response on another area of support.

  And

  Because I asked for help here-

  I think it's the kind of thing to do to post the

  steps that allowed me to correct.

  I knew I had the latest Adobe air platform.

  I felt that I knew that the download files were updated.

  So-

  What was one of the suggestions I've had -

  Told to turn off the firewall and antivirus.

  Instinct made me disconnect the machine from the router.

  I continued and disabled all the protections I had put in place-

  and watched as the first program installed air -.

  Since before January.

  Then put those protections back in line.

  And re-attached the router line.

  It doesn't seem to work now.

• This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. On my Mac.

  
  

  I tried to uninstall and reinstall

  
  

  Help, please!
  

  What version of Mac OS do you have? I guess it's 10.6.8 which is not supported by the App Builder. You need to update to a newer version of Mac OS.

  Neil

• My mouse wireless guard saying lost connection.  I thought that it may need a new Bluetooth card.  An idea of the cost if I do it?

  My mouse wireless guard saying "lost connection".  It takes time for it to reconnect.  Wireless keyboard is OK.  Apple store said that it may need a new Bluetooth "card."  Any idea the cost if necessary.   I tried a new mouse, with the same results.  Having to use a "wired" mouse now taking a much-needed port on my iMac.

  I return to the store and get a better answer. Material, of course, could be the problem. As far as I know, there is no such 'map '.

  Reset the PRAM and SMC... can't hurt, might help.

  Barry

• Wireless connections is lost after count is inactive.

  My internet connection seems to be time. After that my counter top has sat idle for about 15 minutes my wireless connection is lost. I have to click on connect and wait until I can get online. I spent a lot of time on the phone with Frontier trying to get help from their Abu this question, but no one can seem to help me. No idea why it will not stay connected?

  Original title: network Ethernet NIC network adapter wireless network device

  After that my counter top has sat idle for about 15 minutes my wireless connection is lost.

  Wireless connection to what?   Sounds like a router problem, so you can get better help a forum that specializes in this (e.g. by the manufacturer, not an a Microsoft support forum).   In addition, some ISPS will not help unless you restore a direct modem connection, if it does not work properly, often so you might be out of luck to get help from this side in any case.

  Good luck

  Robert Aldwinckle

  ---

• Aftertouch message get lost?

  I have a Yamaha Motif Rack ES of Nektar Panorama P6 and iLok connected via a hub ("HooToo") USB3 generic port USB3 on my MBP.  The Mac USB2 port is connected to the Focusrite Scarlett 18i20, and another keyboard (old Korg N1) is connected to the midi in port of the Focusrite.

  I have several patches where I play the Motif Rack ES with the nectar, with Aftertouch keyboard mapped to the Modulation of the motive... setting to bring in the vibrato with aftertouch. Many times it seems that aftertouch messages get lost... Modulation will come as planned when I press harder the nectar, but often doesn't come back down again... Vibrato stays on until I have pressure and then release again. My vibe all the loot.

  Did someone else had a problem like that and maybe found a solution or workaround? I suspect that the USB hub can be a bottleneck, but I don't see any way around that.  Maybe it's the ground itself? I didn't notice messages are lost during playback of the soft synths, but I'm not sure about this.

  Try to connect the Motif Rack ES MIDI to the Focusrite.  If it solves the problem, using a USB cable on the ground by midday. It seems that I remember reading about the problems of USB communication with that of patterns and MO6s time on the Yamaha forum. USB hub is powered? Try another USB cable and a powered hub.

• I forgot my security question answer on my account and I get lost email address of relief

  I forgot my security question answer on my account and I get lost rescue address, how do I get my new security question?

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• If I use different, the same computer, but an iCloud account will be my projects get lost?

  If I use different, the same computer, but an iCloud account will be my projects get lost? I downloaded the trial version to my friend with her iCloud computer and now it is expired and my project was not yet ready. If I connect with my iCloud on my friend's computer and buy FCPX, my project will be there? And if not, if I buy the program with my friend iCloud account, is it possible I could move my computer later? I would not buy an app €300 just for my friend...

  LLA libraries are separate from the application. That you have subscribed to the trial is quite distinct from what you use to connect to the purchase. However, once you bought with an Apple ID it is that you always have to sign in with to receive updates. The application and the Barrie similar don't really care what you signed in in iCloud.

• Printer get lost on cable network

  I suffer for my printer (HP OfficeJet 7680) constantly be lost. (no software can find to print to it. I can restart and it will show for a while, then he gets lost. I use Windows 7 (little) and have another Windows 7 (32 bit) on the network that has the same problem. I applied the fix for this supposed HP. Any ideas how to continue?

  Click on the 'Start' button--> printers and fax machines.
  Under print jobs, click on "add a printer".
  Click 'Next' in the Add Printer Wizard window.
  Select "local printer attached to this computer.  Deselect "automatically detect and install my Plug and play printer."  Click "next".
  Under Select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is enabled and configured. Click on the button "next".
  Under "Add Standard TCP/IP Printer Port" enter the IP address of the printer (normally I would put the printer is there, but you use a static IP address for the printer).  Click 'Next' and then click 'Finish '.
  Now, select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  Keep the existing driver and click "next".
  Add the name of print spooler, and then click "next".
  Click "next".
  Click "Next" and "Finish."

  Print a test page.  I would like to know if it works.

• I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost and then c

  I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost connected, then lost several times until the capture of attachment option is closed. I tired buy new cables, lightrooom and call Update to Canon support, but still nothing works for me please help?

  Hi Martin,

  In order to make shooting with the Canon 7 D Mark II captive, you need Lightroom 6 and higher.

  Please visit the following link: a list of cameras that can be attached to Lightroom.

  Kind regards

  Tanuj