Installation of IOM on windows server 2008 R2

Similar Questions

• Create a Windows Server 2008 R2 DVD for Installation of the EFI

  Is there an official method of production of compatible installation media EFI for Windows Server 2008 R2.
  I created successfully using a rough method to recreate an iso using the original media and oscdimg.exe set out in a number of unoffical positions elsewhere.  However, I ran into another issue that fits the description that is described in the following article.

  http://support.Microsoft.com/kb/975535

  I expected that the fix provided in this article would have been incorporated in SP1 of Server 2008 R2 version, but has been unpleasantly surprised to find that there was still no support. I'm more than happy to include the fix in the media but it seems that the files are identical apart from the creation date.

  I have completely updated the firmware of my server to set the server up to EFI Shell Version 2 which I hoped would solve some problems, but this did not help either.

  It seems EFI will be the way forward because of size limits of hard drive on startup disks until when can we expect a real sollution?

  If anyone has any experience with this issue so any help would be greatly appreciated.
  Thank you

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Windows Server 2008 R2 rejects all incoming TCP connections

  I am unable to connect via http, for example to a brand new installation of 64-bit Windows Server 2008. The server is in a domain, but is not a domain controller (which is another problem altogether).

  A specific example, IIS7 is running on the server and the site is accessible locally via http://localhost, but when I try to connect from another machine on the same subnet, the connection is denied, even if the Windows Firewall is disabled in all profiles.

  I am able to connect to and browse shared folders on the server by using Windows Explorer, it is not a user account or physical connection problem. I can ping other machines on the network from the server, but trying to ping the server causes another machine "Destination host unreachable".

  I have determined that the server refuses simply connections TCP from any other machine. I think, there must be some other configuration setting I'm missing...

  In the network and sharing Center, I see that my connection type is 'Internet', which can very well what is the problem, but I have no way to change that.

  Help, please!

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to: install Windows Server 2008 R2 (64-bit) in ESXi 4.1 - 260247 with controller 'LSI Logic SAS'?

  Hello

  I have a newly installed ESXi 4.1 - 260247 on a Fujitsu - Siemens GROUND RX300 S4 with 2 x Intel Xeon E5420 @ 2.5 GHz with 36 GB of RAM.

  Storage controller is a LSI MegaRAID SAS 1078 6 x 750 GB SATA - drives configured with 3xRAID-1 logical drives. BIOS Version 4.06 Rev 1.04.2519

  Now, I'm trying to install "Microsoft Windows Server 2008 R2 64-bit" in a virtual machine, but fail because the virtual hard disk cannot be found.

  I tried with all Types of SCSI controller, but when running of the "Create Virtual Machine"-magician, he suggests 'LSI Logic SAS'. "." I tried 'LSI Logic parallel' and "VMware Paravirtual" but it did not work. However, I have not tried "Parallel BusLogic", since it clearly says no "recommended for this guest operating system".

  I was unable to find documentation on how and where I can find the "LSI Logic SAS" - pilot to be able to continue the installation. The

  Windows Server 2008 R2 installation is an ISO obtained directly from Microsoft eLicensing.

  I also downloaded the drivers floppy 'pvscsi - Windows2008.flp' and 'vmscsi.flp' from the ESXi server, but the program finds no driver validates the installation of Windows on them.

  I also extracted files "windows.iso' of the ESXi machine, but not drivers there as well.

  So my question is, what model is the "LSI Logic SAS", I guess I can download these LSI directly, I need to know what model?

  Any help appreciated.

  Thank you!

  Kind regards

  Christian

  chrkad,

  I think you have the same problem I had.   Trying to install 2008 R2 and asked for drivers?

  The issue wound up being an ISO corrupt Ms.

  Try to download the ISO using the java-based download manager.  This will tell you if your download is getting disturbed, as mine was.  It will also be the image once completed to ensure you've got the whole thing of checksum.  Just download via HTTP does not.

  I found myself in download the image of the House and burn a DVD and realize that the back of the office,

• Failed Installation of Windows Server 2008.

  Hey,.

  I recently tried to install Windows Server 2008 on ESXi 4.0.0 (revision 1).

  The installation went all the way until they have to 'Finish installation', how come wrong stop installation.

  "Setup.exe - bad image".

  

  After that, another windows came up saying that windows could not be configured for use on the hardware in my server.

  Could someone advise me to solve this?

  Thank you.

  Oliver.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2008 Installation on server.

  I try several time to install Windows server 2008 on the server, but it cannot run the installation process.

  But when I try to install the software on a PC... It installs successfully. Are there measures to set up the process starts...

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Thank you
  Tony

  Original title: windows server 2008 key

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.

• Installation of Windows Server 2008 R2

  Installation of Windows Server 2008 R2 on a server without an operating system present.  Get an error 0 x 80070017.  What is the cause?  It is a new server.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• HP Proliant ML350G6 with windows server 2008 standard 32-bit memory system installled is 22 gb but the physical memory is only show 4095 MB

  We are facing problems of physical memory to the hp Server model: HP Proliant ML350G6 with windows server 2008 standard 32-bit.
  The memory of the system installled is 22 gb but showing physical memory is 4095 MB only.pls give me the solution for this.

  * original title - NOT of the PHYSICAL MEMORY MONTRANT CORRECTLY *.

  According to this the max is 4 GB for this version and 32 GB for 64-bit. You need to install 64-bit

• Installation of Windows server 2008 on Poweredge R320

  Hello everyone

  We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.

  I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.

  We found no Raid 0 disks

  1 Vitrual disk (s) were found.

  
  I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloaded

  SAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment

  Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810 Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810

  Recommended

  5.2.220.64

  18/10/2012

  Windows Windows Server 2008 R2

  The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe

  I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.

  nodev.inf

  percsas.inf

  I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
  

  Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.

  Thank you very much

  Goudeuk

  Even I have the same problem... Can anyone suggest a solution?

  Thank you

  Scott

  http://www.vmexplore.com

• SITE v2.0 failed Installation on Windows server 2008 R2 with SP1

  Installing CPID v2.0 on Windows server 2008 R2 with SP1, the Setup log reported that the installation failed with the error "CustomAction RollBackSccmComponents returned error code 1603"

  I run the Setup with this command after you open the command prompt as 'Run as administrator ':

  MsiExec.exe /i Dell_Client_Integration_Pack.msi

  I even put the command above into a batch file and run it with the same result. With the help of Trace32, I also found this error to be the main problem causing the failure of this facility:

  "custom action InstallSccmComponents unexpectedly closed the hInstall (type MSIHANDLE) handle provided. The custom action must be set to not close this handle.

  Autour Googling, I came across this link: http://en.community.dell.com/techcenter/enterprise-client/f/4448/t/19416814.aspx to try to perform the steps below, but when I did the steps below, the installation just rolled back without even beginning the installation:

  Steps in the link above:

  *********************************************************************************************************

  "We have found this to be a problem with the way that the custom action is running in the MSI file, it is executed in the context of the user who was unable, we changed this to run in the context of the system that solved the problem. To do is relatively simple;

  First unzip the files from the downloaded executable deployment package. Then, download Orca here, http://blogs.msdn.com/astebner/archive/2004/07/12/180792.aspx. Once installed Orca, do a right click Extract MSI and select, "Edit with Orca. Once Orca lance, do not panic, just click on the top menu and select, "Transform", then select "Transformation." Then go to the 'Custom Actions' Table on the left and find the "InstallSccmComponents" entry on the right; Change the value in the column "Type" 3073, then go to "transform", "Generate Transform", save the transformation in the same directory as your MSI and select, and then close Orca.

  To install, use the following command line;

  MsiExec.exe /i \Dell_Server_Deployment_Pack_v1.2_for_ConfigMgr_A01.msi TRANSFORMS =-number

  = The path to the directory containing the package deployment installation files and your STDS. »

  *****************************************************************************************************

  Has anyone seen this problem before? And if so, how to solve?

  Thank you

  TeeDarling77

  I found myself by opening a ticket with Dell to get this problem finally solved. After the installation of Dell's Support log shipping, they asked me to follow these steps below:

  1 if the SQL DB is on a separate machine, try to create the "SMS_TaskSequence_Action" class in WMI under \\.\root\sms\site_ >.  You can download WMI Explorer to browse if you want to see if this class already exists.  Run the script below will not hurt if it already exists.

  a. here are the instructions to create the custom class.  First open powershell as an administrator.

  b. set-executionpolicy RemoteSigned

  c. change the extension on the attached in .ps1 file and change the file to replace the "site_abc" by "site_their 3 letter site code.

  d. change the storage location of the ps1 file.

  e... \WMIClassAdd.ps1

  f. restart and try the installation again.

  3. If it still does not work, send me the newspaper install again to look at.

  Note:

  Here is what was in the attachment in step C.

  ****************************************************************************

  $newClass = ' new-Object System.Management.ManagementClass

  ("root\sms\site_abc", [String]: empty, $null);

  $newClass ["__CLASS"] = "SMS_TaskSequence_Action";

  $newClass.Qualifiers.Add ("Static", $true)

  $newClass.Put)

  *************************************************************************

  After you run the instructions above and restarted the server, installing v2.0 CPID ended successfully.

  I hope that these instructions will help someone in the future... :))

  TeeDarling77

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• Do you have Oracle Fusion Middleware Infrastructure Installer 12.2.1 and content Webcenter 12.2.1 Support windows server 2008 R2?

  Do you have Oracle Fusion Middleware Infrastructure Installer 12.2.1 and content Webcenter 12.2.1 Support windows server 2008 R2?

  Hi Saif,

  This is not supported for the content... Please check the certificate of the MOS

  Support content 12.2.0.1 MS x 64 64 bit 2012 and 2012R2 and same is applied to the installation of Oracle Fusion Middleware Infrastructure program.

  

  Thank you

  Amey

• OM_5.4.0_Man_Node_A01.msp installation fails (Windows Server 2008 x 64)

  I can't get it to load the patch installer. Of course, life would be easier if Dell has released a proper version of OpenManage (with support for Windows Server 2008 x 64).

  Here are the instructions...

  Application of the Service Pack
  1 double-click the MSP file or enter the following in a command prompt window:
  MsiExec.exe /p OM_5.4.0_Man_Node_A01.msp

  And the error message...

  Windows install

  The upgrade patch cannot be installed by the Windows Installer because the program to be upgraded is may be missing, or the upgrade patch may be a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.

  
  

• em cloud control windows Server 2008 installation

  Salvation of the experts;

  I try to install enterprise manager cloud suite on windows server 2008 R2. I also have the database oracle 12 c on windows server. But when I clicked on the Setup file, the installation program is not started, cmd frame is open and disappear manually. How can I solve this problem?

  Can you check if there is no Installation log file is generated in Program Files/oracle/inventory.

  If this is not the case, try to do the installation in silent mode and see if it works.

  concerning

  Pravin