Installation of MS program loop

Similar Questions

• When I try to install iTunes, I get this error: "there is a problem with this installation package. a program required for this installation could not be executed.

  He said: "there is a problem with this installation package. a program required for this installation could not be completed, contact your provider of batch

  original title: itunes is not installed.

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to see the links and check.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  See also:

  Solve problems with programs that cannot be installed or uninstalled http://support.microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  I also suggest you to contact the Apple support and check.

  http://www.Apple.com/support/

• Try to load Quick time. All goes well until I get "administrator has set policies that prohibit the installation of this program.

  original title: rules of the administrator

  Try to load Quick time.  All goes well until I get "administrator has set policies that prohibit the installation of this program.

  I am the system administrator, logged as such, can't find a way to change these policies of 'administratoer' to allow me to download and install a program that I want to install!

  Hi J1walters,

  ·        The computer is connected to a domain network?

  ·        Which edition of Windows vista is installed on the computer?

  ·        You are able to install other programs outside of Quicktime?

  However, you can try the steps below and check if it helps to install Quick time.

  Method 1

  a. open the location of the downloaded program.

  b. right click on Setup.exe or install icon.

  c. click the run as Administrator option.

  Check if the program is installed.

  Method 2

  Try to temporarily disable control user account (UAC) on the computer and try to install the program and check if he moved very well. Subsequently re-enable the UAC settings after installing the program.

  Access the link below to see how to enable and disable the UAC settings.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A previous program installation was never completed. You must restart your computer to complete that installation before running the installation of Skype program. Setup will now close

  I get the following information on the screen.

  Skype information

  A previous program installation was never completed. You must restart your computer to complete that installation before running the installation of Skype program. Setup will now close

  Original title: installation of Skype in Windows 7 Professional

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the question on Skype.

  I will definitely help you with this.

  Please provide the information below.

  1. are you an error code?

  2. don't you make changes to the pc before that?

  I suggest you go through the links below:

  Refer to the suggestion given by John Rubdy replied on May 27, 2011:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/unable-to-install-Skype/c00745e0-39b1-49FA-b3b0-c6ed5feab9bf

  Also check out the link below:

  https://support.Skype.com/en/FAQ/FA11033/why-do-i-get-a-Windows-Installer-1618-error-code-when-i-install-Skype

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Slimware download files can be deleted after installation in the programs?

  Slimware download files can be deleted after installation in the programs?

  Hello

  Do not download in the first place.

  Read this:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/Driverupdate-from-Slimware-utilities/d016d4a2-7ac4-467e-B07B-59058e7827e2

  See you soon.

• Error associated with Windows Installer during the installation/uninstallation of programs

  Original title: HekMat

  Hi guys! having a problem, wondering that how can I repair my windows installer? and when I want to install or uninstall some programs, it is said that (the windows installer was not correctly accesed) so please help solve my problem, I'd be happy! Thanks :)

  Hello

  Thank you for reaching out to us on the Community Forum of Microsoft,

  According to the description, it seems that you have problems with installation/uninstallation of programs and you receive error message associated with Windows Installer.

  Troublsehoot the issue try the steps below and check to see if they help.

  Method 1:

  Step 1:

  Start the Windows Installer service
  1. Click Start, type Services.msc and press {ENTER}
  2. double-click on Windows Installer
  3. set the Windows Installer to Manual startup type
  4. Click Start to start the service. Note the error message, if any.
  5. click on OK.

  Step 2:

  Unsubscribe and re - register the Windows Installer to do this follow the steps below.

  1. click on start, run, type MSIEXEC /Unregister. and then click OK. Even if you
  This correctly, it may seem that nothing is happening.
  2. click on start, run, type MSIEXEC/REGSERVER, and then click OK. Even if you
  This correctly, it may seem that nothing happens, or you can briefly see an hourglass.
  After you run this command, the operation is complete.
  3. try your application based on Windows Installer again.

  Method 2:

  The process of installing or uninstalling a program may fail for several reasons. This article describes the following issues (click on each question for corresponding resolution):

  • Windows problems install
  • Installation or update of programs in Windows may not have completed successfully
  • Uninstalling programs in Windows may not have completed successfully

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Hope the helps of information provided.

  Please keep us informed if you have more questions about Windows.

• During ANY installation of a program (e.g. Skype), I get the "year error occurred while attempting to create the directory C:\Program\Microsoft\Windows\Start Menu.

  original title: facilities program

  During ANY installation of a program (e.g. Skype), I get the "year error occurred while attempting to create the directory C:\Program\Microsoft\Windows\Start Menu. What happened with cd installs, but also downloads on the internet.  I already "took possession" of the computer, which is still delayed freaking, but am still unable to fight through all the questions of security, I guess that.  Any help would be greatly appreciated as I'm about to DOWNGRADE to something more user-friendly.  Thank you

  BTW, this is WINDOWS 7 Home Premium

  I had this problem for a long time on Windows 7. Finally, by pure chance I came across this solution that solved the problem. -Take the shortcut of the property

  http://www.SevenForums.com/tutorials/1911-take-ownership-shortcut.html

  You will need to run the "fusion" in the context menu of a reg file, published as part of the solution to change some registry settings. On any folder, you'll get a context menu 'Take Ownership' which restores the property correctly. This solves a lot of problems installing.

  Many people have trouble with this and therefore decided to post here.

  Gem of a solution. Thanks to GRIM and Brink on Windows 7 Forum!

  -Jayawanth

• How to make windows require a password during the installation of new programs?

  How to make windows require a password during the installation of new programs?

  Hello

  You will not be able to circumvent the password that appears before the execution of actions (installing a new program) in a non administrator account.  If you are logged on as administrator, and again, you get the command prompt, you can disable UAC (User Account Control) to stop the password dialog window.

  However, as a work around you can right-click on the installation of the program files and select run as administrator. Check if this is useful.

  Let me know if I can help you with this question or any problem related to Windows.

• My serial number that has been given does not work for the installation of the program of the premier adobe elements.  What should I do?

  The serial number that gave me to install Adobe Premier elements 14 does not work.  How can I get a serial number of work in order to proceed with the installation of a program that I already paid for.  I can't get anyone on the phone with Adobe to help me.

  Error "serial number is not valid for this product". Creative Suite

  Select a topic and then I STILL NEED HELP to start the first elements online chat

  -http://helpx.adobe.com/contact.html?step=PRE

• Muse CC x 64 installs in C:\Program and not C:\Program Files

  I want to install Muse CC x 64 through creative cloud Packager.  Whenever I installed Muse, it installs to C:\Program and leading mad Windows.

  I have re-uploaded Muse via CCP, but I'm still having this problem. I'm doing something wrong?

  Edit the ExceptionConfig file.  It is just an XML file.  If you reformat it is not all recorded on a single line, you need to change line 109.  Serach otherwise for the Muse section and change the Argument with the [INSTALLDIR] value.

  [INSTALLDIR] must be enclosed in quotes.  Change this key value to look like this:

  You can then run the ExceptionDeployer.exe and it will install properly.

  If you are manually install and don't define the installation directory be sure to place in quotation marks or use the 8.3 name path file to install.

• You try to run the system on my desktop restore encounters a problem with the program looping.

  Original title: System Restore loops

  Hi, I am trying to run restoring the system on my desk is a problem with the program in a loop.  He directs the system restore and then comes back just to start the system again Restore page.  How to solve this?  I started having problems when I have updated the BIOS on my motherboard.  When I installed the motherboard at the start, I think I used the incorrect installation disc (my son has same brand motherboard but the sound is more advanced).

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
  contact PC manufacturing (see support links below) and order the recovery media.

  Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

  Also to save your documents on external support (if possible) before starting the recovery process.

  Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

  To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

  If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
  Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  http://Acer.custhelp.com/app/answers/detail/A_ID/2631
  Acer support: http://www.acer.com/worldwide/support/
  Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

  Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
  The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
  Support: http://www.adventcomputers.co.uk/product-support/support-services

  ASUS: Press or press the F9 key as soon as you see the Asus logo.
  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
  ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
  Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
  Or: http://www.dell.com/

  EMachines: hold the Alt key and hold press and release the key F10
  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
  Support: http://www.emachines.com/ec/en/US/content/support

  Fujitsu: Press F8 several times directly after switching on
  https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
  Support: http://www.fujitsu.com/global/support/

  Gateway:
  http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
  Support: http://www.gateway.com/worldwide/support/

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
  Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Lenovo uses the F11 key to launch the restore process:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
  Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
  https://support.Lenovo.com/us/en/documents/ht077384
  and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
  Support: http://support.lenovo.com/en/supportphonelist

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  You can also find parts of this article from Lenovo worth reading:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

  LG: Press F11 directly after switching on / to start the computer
  Support: http://www.lg.com/

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.
  Support: http://www.packardbell.com/index.html

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
  Support: http://www.samsung.com/

  Sony VAIO Windows 7: restart and press "F10".
  https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
  Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
  https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
  Support: http://www.sony.net/SonyInfo/Support/

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
  Support: http://www.toshiba.co.jp/worldwide/

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• All Windows updates and all the patches and individual installation on my program

  Is someone can you please tell me why every windows update fills up my programs?
  I have about 30-40 on my all programs.
  Can I remove all?
  I don't have this problem on my other pc just this laptop.
  Thank you in advance.

  Hello

  It seems that no one is able to answer this question here. If you have 2 possibilities:

  -disable the update of windows to avoid an additional installation of new updates and etc...
  -go to "Add/Remove Applications" and uncheck the 'Show updates' (or something similar). This box should be at the bottom of this window

  Otherwise, you should check out other, more associated microsoft forums, or just google a bit around to find an answer.

  Welcome them

• Incomplete installation of the program unknown - unable to capture/playback pop box

  I am more able to update/install programs.  I get an error message indicating that another installation is running.  Programs already checked to see which would be installed to recently.  Also checked the tasks of process & CPU Manager to try to identify which tries to run background booklet.  Without success.  The pop-up flashes too fast... impossible to read.

  Also tried to run the detection of problem Windows progr.  It is said there is a program in execution, but it does not provide a solution to cancel or complete installation.

  Is there another way to catch/see what is at fault for giving up and reinstall correctly?

  Run a full scan with your antivirus software.

  Your installer of Windows can still run, try this to return to normal:

  http://sherylcanter.com/wordpress/2008/12/another-installation-already-in-progress-but-its-not/

• Error during installation of a program with web server

  Hello

  I have a program that uses the Web server, it works fine on the development computer, but it seems that I can not configure the application builder to successfully deploy the web server on the target computer. I think I tried this medication, including the links below and still get the error message (see image)

  http://www.NI.com/white-paper/7747/en/#toc13

  http://digital.NI.com/public.nsf/allkb/62B9C2D5C91EE8B28625778800609FF2?OpenDocument

  ... help

  Dima

  Hi Shane,

  Thanks again for your response, I finally got a solution.

  After uninslalling and the computer completely from products OR cleaning, manually by removing all remaining folder and files and cleaning the registry, I installed a new copy of LabVIEW by selecting only the LV 2011 components.

  In addition, I think that did the trick, after a new version of the project of creation, I notised there are files that appear twice, for example: dp.msi and .msi dp (2), so I deleted the Installer project and physically on the disc.

  ... Finally, after creating a new installer and install on the target machine (that I also cleaned and deleted all the old files) the installation went well, and the web server has been deployed.

  Thanks again for the help,

  Dima

• Internal Error 2908 {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} during the installation of a program

  Hi all

  I need help please. I get 3 errors when you try to install a program and I will include all of the below 3. Please help me get rid of this headache. Thank you.

  This is the first...

  Internal Error 2908. {837EE547-6D3B-7124-817B-A0DDC38CDA99}

  When I select OK I then get this one

  Internal Error 2908. {182C2188-3F15-CE6C-1FC2-23A0CB4637D1}

  If I hit OK once again I get a different error...

  Error 1935. "An error occurred during the installation of assembly ' vdFramedControl, Version ="6.1.60117.0", Culture ="nuetral", PublicKeyToken ="54EAC14E23C9EE53", ProcessorArchitecture = x 86." Please see Help and support for more information. HRESULT: 0X8002802F.

  It drives me crazy and I don't know what to do. Thanks in advance for any help that you could provide.

  Hi KelMil,

  1 Windows operating system you are using?

  2. what software are you trying to install?

  Method 1:

  You can consult the following thread link and try the steps Diana D December 1, 2010 and check if it helps.

  Error 1935.An error occurred during the installation of assembly ' Microsoft.VC80.ATL,.

  Method 2:

  You can also try to give permission for the two above mentioned registry keys. Check for multiple entries, registry keys, and give permission to all keys.

  a. click Start, type regedit in the search box and press on ENTER.

  b. click on edit and select find and type the copy and paste the registry key: {837EE547-6D3B-7124-817B-A0DDC38CDA99} and click Next.

  c. right-click on the key component and select permission.

  d. click Add, type everyone and click ok.

  e. Select group or the user name one by one and check the complete control of the area for all.

  f. click apply, click Ok.

  g. check for multiple entries for the key. If one is present, then repeat the steps above to give perimmision to all keys.

  Note: You must give permission to the {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} key by following the steps mentioned above.

  h. restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry