Installation of sp2 vista problems wih

Similar Questions

• Installation/space Windows Vista problems

  Recently the Windows Vista Setup program does not allow the installation of the different software components.  Sometimes I have a vague (as impossible to install) error code, sometimes the installation starts from inside IE and then just comes back to IE. But no installation occurs.

  I am slot as Vista Business 64-bit Service Pack 2. (5 gig Ram)

  I have between 50 to 500 free MB on the disk. (I have a drive c to 35 gigabytes.  But, windows uses 31 G (winsxs uses 20 G).)  Supposedly, it's a problem of Microsoft to know during the years that they have no desire to fix.  I regularly try to clean the space, but it's like trying to hold back the Mississippi...

  Uninstall seems to work.

  I ran various utiilties of Microsoft to try to resolve the problem. (I think this is worse!)

  I ran sfc/scannow and it has detected/fixed no problem.

  When I was able to capture more storage space (by moving my virtual memory on another drive) briefly the problem has not disappeared.  The Publisher of the software after several hours of searching in various newspapers told me it was a problem of Microsoft Installer.

  I don't want to re - install the OS that I don't have a number of my installation for different software products discs (they are all legal).

  I'm not so sure that Windows installs my updates properly at this stage either.

  Any help would be appreciated.  I'm drowning in time to support.

  What is E? The dual computer boot or pagefile on E refers to the operating system in C?

  I did not used Easeus Partition Manager, Partition Magic and Acronis who buy software using, but the principles will be similar. What you need to do is to reduce the size of D, so that there is a free space between C and D, and then increase the size of C in this space. You can then increase the size of D in the original unallocated space of 5.86 GB in D.

  I suggest that you study the knowledge base, and there is a line on manual. Print the relevant parts. The FAQ in the first link and follow two particularly relevant links:

  http://www.partition-tool.com/EASEUS-partition-Manager/FAQ.htm

  http://www.partition-tool.com/EASEUS-partition-Manager/FAQ/technical-faq32.htm

  http://www.partition-tool.com/knowledge-base/how-to-extend-system-partition.htm

  Good luck.

• No sound after Installation of SP2 Vista - pretty much everything tried, so reinstalling the Device Manager software

  After downloading vista service pack 2, there has been no noise. Followed all advice found, software audit, software from the Device Manager. I have an IDT High Definition Audio CODEC and NVIDIA High Definition Audio on an HP laptop. I'm at my wits end as to what is happening.
  Any help would be great, cheers

  All the good guys, went on the HP site, installed another of their CODEC IDT drivers, even though he was no doubt a version more old, then all hunky dory.
  Solved

• Vista - problem with the installation of Service Pack 2

  During the installation of sp2 for vista 32-bit I'm having the following problem: he is stuck on configuring updates: stage 3 of 3-0% conplète computer restarts poster above restarts again and again, and again, please help!

  http://support.Microsoft.com/kb/949358>

  http://support.Microsoft.com/kb/2438651/en-us>

• assessment of Vista sp2 uninstall problem

  I have problems to uninstall evaluation sp2 build 6002. in Add/Remove programs the kb file is there and when I click on uninstall crosses the long process or uninstall and restart - then after another 10 minutes about it says theat the uninstall failed and return to the previous.  I, ve about restarted 10 times and its still there. the reason why I want to uninstall is other than irritating pop-up saying its obsolete, my pc stops twice a day and I get the blue screen saying that the pattern and error corresponds to the installation of sp2. -ideas-i have tried uninstall 4 times now.

  scas100,
  Please post with the information requested here: what to post in the Windows Update forum.  Also, let us know if your copy of Vista is genuine and that you have installed and passed the WGA.

  Then take a look at this article and try the steps to remove from command prompt: http://support.microsoft.com/kb/948537/

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Post installation of the Vista SP2, it does not detect my DVD drive.

  Recently in the month of April 10, I had my laptop (Compaq Presario V6608AU) repaired because it doesn't detect DVD drive. The techincian had reinstalled vista on it and it was my regular vista. As my laptop has automatic updates enabled it installed Vista SP1 and SP2 later. After installation of SP2, my DVD player no longer works. The light initially whn system starts but windows gets loaded, it didn't post. Could some help me to get this resolved. Restore option I tried, but I restore options after installation of SP2. I have my handy DVD recovery but I'm handicapped because of this problem of DVD player and impossible to restore...

  Support Microsoft still offers a FREE support for Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  They will give you the expert help you need with this problem with SP2.  They can connect remotely to your computer to help diagnose the problem - something that we cannot do.  Enjoy the offer while it still exists.  I'm sure they can help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

  Original title: try to put wrong question ID problem!

  Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

  I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
  #
  # Version JRE: 6.0_30 - b12
  # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
  # Problematic frame:
  # V [jvm.dll + 0x94dca]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  #

  Hi Verisetti,

  Have you installed security software after formatting windows?

  If so, you can uninstall the security software temporarily and check if you receive the access violation error.

  If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you install the security software after the trial.

  What about Windows vista product ID, you can try to validate Windows and check if it helps.

  For more information, see the following articles:

  What is the validation, and how does it work?

  Genuine Windows: Frequently asked questions

• Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. suddenly lightroom won't start when I try an image I tak

  Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. Suddenly, lightroom will not start when I try an image that I have taken with my nikon D500 and transferred to WINDOWS 8.1.  I tried to re - install lightroom: the application procedure serieal number, but refused to accept the number that has always worked. Help, please!  Jan

  If you are certain that you have the correct number of series, there are really not much that we can help you here. You can try to download and install the latest version of Lightroom 2. This will be the trial version, but when the trial screen there is an option to indicate that you have a serial number. Either way, Lightroom serial numbers start with the four first digits being 1160.

  Adobe - Lightroom: for Windows: Adobe Photoshop Lightroom 2.7 - English, French, German

• installation of SP2 removes feature "tablet".

  When you install SP2 on my HP Pavilion tx1419nr tablet pc, it deletes the Tablet and touchscreen feature.  HP says to stick with SP1 and not MS update.  I have already deleted and made a recovery and tried again to install SP2, but nothing helped.  Earlier, I did a restore prior to the installation of SP2 and have the function to return.  Should I update to SP2?... will I have problems later if I'm not?... I won't MS support?  This machine has been problematic from the beginning with this and my warranty period will soon be at an end.

  All expertise would be greatly appreciated.  Thank you.  :-) Lo

  As your Vista operating system is preinstalled HP, you are not eligible free support for MS, except in special circumstances that includes SP2...

  All your support comes from HP.

  But, you are always welcome to ask your questions here.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• During the installation of SP2 (KB2656369) get 0x800706BE error message

  During the installation of SP2 (KB2656369) error 0x800706BE get tried restoring the system without success is - that someone has a fix for this problem?

  Hello

  Trying to download SP2 from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=28

  You can install SP3 - download from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24

  Don't worry about the text which says that these are network facilities, they work very well for standalone computers.

  Tricky

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• Vista problem experienced Techniocian

  I have Vista Home Premium 32-bit. Applications are suspended. I have a lot of memory and have run diagnostics of HD. It's certainly related software. I'll run some future spyware scanners. I can't install any programs via Firefox or IE 9 even in SafeMode with network. They arrive at the final stage of download (where they are scanned for viruses), then close the application (IE, firefox). My guess is the virus. I'll try to install spyware on USB scanners. What could this be?

  Hello

  Once you are sure that the system is malware free and if necessary:

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to move Windows program from Windows.old files after you do a re-installation of my Vista Home Premium?

  How to move Windows program from Windows.old files after you do a re-installation of my Vista Home Premium? Can I move the program files or do I have to reinstall each program with the cd that came with the applicable programs? I know how to move all the other files. I do not know how to move the program files. Thank you in advance for help you.

  You can't move programs from Windows.OLD.  The programs need to be reinstalled.

  Sorry, but that's how.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the installation of Windows Vista, I get the error message "" windows/System / * ' file was not found "

  Original title: after the new installation of windows Vista it does not work.

  After the new installation of windows Vista on my laptop Lenovo at startup, it displays "windows/System / *" file could not be found... I also tried to fix.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  If you continue to have problems with it contact lenovo

  http://www.Lenovo.com/us/en/index.html

• Initial full Vista installation failed, shows 2 installs of Windows Vista from starting.

  Second installation was successful, but the installation failed initial always appears at startup upward. At a complete loss to know where to find entries that say my system there are 2 installs of Windows Vista. When launched the CD to 'view' where this "alternate" install is shows unknown HDD to address 0 w a lack of disk space. Of course, it is more than likely that only some files in the registry or the system "ask" that there is a current installation. Where can I find these to remove them? Have not found anything on any forum re: this issue. TYVM<3!>

  I see that a "MVP" edited the title of the question, but it did NOT reflect what the question. Please leave the full question in the title of the post. My problem is not a simple installation of 'failure '. I just want to find out where the entries are which are originally to show 2 Windows Vista o/s when I 'start' my computer when there are 'only' real installation. Note: I have two we HARD a WinXP Pro, the other Vista disks. At the start, it shows "Versions of Windows" and then Windows Vista and finally Windows Vista again. The non-existing o/s installation failed is the 3rd entry.

  Modify the boot.ini file to remove the installation failed (make sure that you remove the right pair) or in msconfig, check the boot paths