Installation of the addon requires escalation of privileges

Similar Questions

• Windows 7 installation of the CD - requires CD / DVD player

  Hi, I am installing Windows 7 on CD on a new machine (new HD like the old one failed).

  I can get the machine to start the installation (I can click on "install Windows 7"), but then immediately he asks a saying CD/DVD device driver is absent.

  The driver is very likely to be missing is a new hard drive, but I cannot take place even if the machine can use CD player to recognize the Windows 7 disc and start the Setup process (from the CD player), but not everything can go further.

  Any help much appreciated.

  Thank you.

  It of a shot in the water and no sense complete because the error message complains of a CD/DVD driver rather than a hard disk driver, but you can go into the BIOS and change SATA of Enhanced in AHCI option (your BH12LS38 from LG is a SATA device).

• Satellite M70-193: installation of the graphics driver - issue minimum requirements

  I can't install the driver on my M70-193, this meesage is coming "this system does not meet the minimum requirements for installing the software. Setup will close. What can I do? Thankss...

  Hello

  Very strange?  :|
  How have you tried to install the graphics driver and what graphics driver you tried to install?
  You must use the on the Toshiba page.

  I recommend you to first download the graphics driver.
  Then go to Device Manager and remove (uninstall) the graphics card in the system.
  After restarting again the OS should automatically find the new device and ask start the installation.

  In this case, you must follow the installation procedure and install the new driver downloaded.

  Good luck

  Good bye

• Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

  Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

  aarruunn, you might want to try Windows Installer Cleanup utility.

  http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

• Can not build an installer, because it seems to have deleted the files required

  LabVIEW does not locate the Installer source of a component necessary to build this installer. LabVIEW finally found the missing element in the following distribution:

  The distribution name: NOR-DAQmx 8.6, disc 1
  Last known installation path: C:\National Instruments Downloads\NI-DAQmx\8.6\NIDAQ860-1

  Search source for NOR-DAQmx 8.6, disc 1 Setup and build your installer again.

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:

  CDK_Build_Invoke.VI.ProxyCaller > CDK_Build_Invoke.vi > CDK_Engine_Main.vi > CDK_Engine_Build.vi > CDK_Engine_PromptForMissingDist.vi

  Loading information of product deployment
  Loading information of product deployment
  Adding files to install
  Makes adding files
  Preparing to build the deployment
  Copy of the products of distributions
  Copy distribution "OR-DAQmx 8.6, disc 2" of: C:\National Instruments Downloads\NI-DAQmx\8.6\NIDAQ860-2\ to: C:\LabVIEW\DAQ\Pentium4_Loggers\builds\Installers\Data worm 23a\ P4 Logger ".
  Deployment of the completed building

  I think I must have deleted the files required from my C drive.

  (Updated)

  This is now fixed.

  I managed to resolve this, by a combination of download OR-DAQmx 8.6.1 from the Web site of NOR and NOR-DAQmx 8.8 disc installation.

  

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• Intel HD graphics driver installation error: "computer does not meet the minimum requirements.

  Hello

  I tried to update the Intel graphics driver in my notebook using sp55098.exe , but the system returned the following error:

  "This computer does not have the minimum requirements for installing the software.

  I have the following: dv6-6b05tx laptop computer running windows 7 pro 64

  It's the device I am trying to update:

  Intel HD Graphics Family
  Current driver date: May 7, 2011
  Current version of the driver: 8.830.6.3000

  I tried the drivers on the Intel site, but they do not work either.

  Help, please.

  Thank you very much.

  PS

  I managed to update the drivers of AMD Radeon HD 6700M using this link of guru3d.com.

  But I can't find a similar solution for the Intel card.

  Hello:

  Please read the notes on the AMD driver file...

  Description:

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  The Intel driver is only for the models with only the Intel UMA graphics adapter.

  You must live with what version of the video, Intel is in the AMD driver package.

  Paul

• The installation of some software requires admin password I've ever used

  Installation of some software requires the admin password, I've ever used.

  Until this two apps will not install on Windows Vista PC, without admin password.

  Ever need before and it's been several years that laptop has been obtained.

  Never needed before.

  One is an upgrade of the software that did not before.

  Any ideas?

  Installation of App still requires a user account to be an administrator. If you are not currently logged as long as administrator, then you need to switch to an administrator account. Otherwise if you are currently on an Admin account, there could be some problems as to what may cause this.

  Can you provide information on the following:

  1 when was the last time you were able to install something in your PC?

  2. have you made any changes to the computer?

  Thank you

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  When I install Oracle Grid Infrastructure 12 c Release 1 (12.1.0.1.0), I have the following error:

  Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  Cause:-unable to access the temporary location

  Action - make sure that the current user has required permissions to the temporary location

  Details of the addition

  -GLWB-1560: "/tmp/" temporary directory path is shared on the nodes '... »

  The oracle user I use is to have access in / tmp, I did a test by creating a file here.

  Any idea?

  Thank you

  This is the description of the error, I saw, but he was trying to find an idea how to solve this problem.

  Anyway, I solved it by renaming the Group of volumes and accordingly update the fstab and the grub.conf.

  Thank you

  Eugen

• Adobe Premiere Pro requires new mac operating system. My Adobe programs already installed would work after the installation of the new operating system?

  Hey there,

  I think to get the Premiere Pro, which requires that the new Mac operating system. But I installed the other Adobe programs such as Photoshop, Indesign etc years ago.  These work on my current operating system (= Mac OS X 10.8.5).) Anyway, now I wonder if my programs already installed Adobe might work after the installation of the new operating system.

  Any ideas what to do?

  Thank you very much.

  Yes, they will work in the new OS.

  Kind regards

  Hervé Khare

• During the installation process of 6 of Lightroom, I get a box that says: Windows Vista not supported.  I have Windows 7 with Service Pak1. I meet all the other requirements listed.

  During the installation process of 6 Lightroom, I get a box that says 'Windows Vista not supported'.  I have Windows 7 with Service Pak 1.  I meet all the other requirements listed.  Any ideas?

  Hi Chuck,

  You can check out the link below.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope this will help you.

  Kind regards

  Hervé Khare

• I get a bootstrapper error and when I went in the lineage page that another user has been offered and checked the system requirements, it appears the installation of Player 10, although it offers Windows XP sp2 as an option in the download, the system

  I tried three times successively to download the Player 10 upgrade my system pushes me to and continue to get a "bootstrapper" error message interrupt the installation.
  I tried already the linked page suggested to another author of the question with the same problem and get a message that I have not found in the download process, about the system requirements.
  The download site in fact allows to select your Windows XP SP2 operating system, but on the page linked toubleshooting, system requirements do not support anything earlier than a Windows 2010 server.
  Is no upgrade to Adobe Reader available for Windows XP SP2 version 2002?

  The Windows operating system older Adobe Reader can still be downloaded is Windows XP SP3 or Windows XP SP2 (64-bit).

  The latest versions of reader for these are 10.1.10 or 11.0.08.

  You can try to install one of these versions of Reader for Windows XP SP2 (32 bit), but there is no guarantee that it will work.  Use Setup http://get.adobe.com/reader/enterprise/ offline

• Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

  Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

  Run the cleanup tool to remove Ps CC 2014:http://www.adobe.com/support/contact/cscleanertool.html .

  Restart the computer and then try to reinstall Ps CC 2014.

  Kind regards

  Ashutosh