Windows 7 installation of the CD - requires CD / DVD player
Hi, I am installing Windows 7 on CD on a new machine (new HD like the old one failed).
I can get the machine to start the installation (I can click on "install Windows 7"), but then immediately he asks a saying CD/DVD device driver is absent.
The driver is very likely to be missing is a new hard drive, but I cannot take place even if the machine can use CD player to recognize the Windows 7 disc and start the Setup process (from the CD player), but not everything can go further.
Any help much appreciated.
Thank you.
It of a shot in the water and no sense complete because the error message complains of a CD/DVD driver rather than a hard disk driver, but you can go into the BIOS and change SATA of Enhanced in AHCI option (your BH12LS38 from LG is a SATA device).
Tags: Windows
Similar Questions
-
Qosmio F - installation of recovery with portable CD/DVD player
Hello
I need help, I need to reformat my Qosmio using the recovery CD, but my problem is that my CD/DVD drive does not work. So I decided to buy the new portable CD/DVD player. When I try to reformat using the restore CD in the portable CD player that does not work.
I have an external hard drive, my plan is to transfer the hard disk then I'll use it to reformat my computer. is it possible and how can I do?
Can someone show me how to solve my problem?Thank you
rtmasagcaHey Buddy,
I think that the installation of recovery is not possible because it can be made of internal CD/DVD drive.
I put t know what laptop you have because you n t will display information but most of the computers laptops don't support booting from an external drive.Therefore, buy a new internal drive to install Windows recovery disk. Then it won't work.
-
I am dual-boot between Windows 7 and Windows 8, but fear the time required to start,
I am concerned about the time it takes my computer to start
I have a system dual boot with Windows 7 and Windows 8, and it takes several minutes to decide to show me the screen to decide which OS to use, and then it restart and takes some time to start [the chosen OS
Isn't time that Microsoft has put some of their skills as computers immediately when starting lit instead of focus on trying to outdo all other systems with stuff
By the way, I have the same comment on the closure, it takes some time to completely close down--another point for Microsoft to put the attentionUnfortunately, the processor is just at the level of the minimum required. In addition, RAM is 4 GB, in which folder page size will be approximately 8 GB. Norton 360 scans all files prior to execution, even if it's a system file. This is the reason for the delay.
Try to upgrade the processor and the rest will be solved. -
Windows XP installation causes the laptop restart on the installing devices portion.
I have a HP dv9000 series, which came with vista and I decided to downgrade to XP. After having inserted the WinXP CD and continue with the installation of the configuration, starts about 39mins and then begins to install devices that gets stuck and then to halfway through the process and my cell phone begins to turn off and then back on. When he turns on the system begins to restart the same installation configuration and then turn back off the coast to the installation of devices.
Ive google which could help for hours. things like type SHIFT + F10 and then type tskmgr.exe and ending the files of svchost.exe. This was do nothing. The computer restarts again to the installation of devices.
I read it could be a driver, but that the cause could be could be?
We hope to get this fixed a problem and thank you all who try and help me.You can get the best expert advice for laptop HP attending the Forum Notebook HP. Carey Frisch
-
On the Satellite L650-12Z DVD player does not work
(this is posted on the US forums who sent me here)
Hello.
I have a bit of a problem with my portable DVD player. If I put a DVD in there, he turns and runs for 2 minutes, but he made nothing read (read: I do not hear the lens engine).
Now, in this age of digital distribution, it is less a problem then it used to be, but it is still a bit boring.
It is also not a question relating to the OS because when I try to boot from a DVD of Windows 7 it also does not work.It is out of warranty, so I can't send it to cost me money.
Thanks in advance.
It looks like a hardware problem of the optic disc.
In some cases it is only a matter of laser lenses, could you fix this by cleaning up that part.I cleaned the lens laser alcohol or cotton tip.
Some people recommended this and in my case it helped also.Of course, this could be a solution only in case your laser lens is dirty.
-
Satellite U400 - failed to create the recovery disk - bad DVD player?
Hi all
I have a 13 inch Satellite U400.
Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).
My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
I noticed, that error code changes, but I don't know how to get the recovery disk creator will.What can I do? Change something in the registry?
I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.So, if someone nows how to work at least one of the problems, please give me advice.
Thanks in advance,
wiglip
Hello
Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).
And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!
Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
(1) run Regedit (start-> Run-> Regedit)
2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
(3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
(4) restart.Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724Good luck! :)
-
burned music CD only works in the computer not in dvd player
CD burner problem
I have music from different CDs in my media library and made a cd I burned and it works that on my computer and my dvd player, it does not work for my friend, I did it to help me please Gwen123
The following items may be worth a visit:
Windows Vista - burn a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
(Expand the section: "Burn audio CD")Windows Vista - burn a CD or DVD in Windows Media Player:
Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questionsWindows Vista - burn a CD or DVD in Windows Media Center
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center
(expand the section - to burn an audio CD to play on your CD player) -
How to replace the drivers lost for dvd drive that is not recognized by the computer.
If you can connect to the internet, go to the website of the manufacturer of your make and model of PC support and required drivers should be available there. If the drive is an external DVD, go to the support site for the manufacturer of your DVD drive specific make and model and they should be available here.
Device manufacturers generally provide drivers rather than Microsoft.
-
Hi, I tried during the last hours of 8-9 solids, to install the software so that I can watch a dvd on my computer... :( I almost disjoint my satchel right & worn out from my computer... :( I could watch the movie on youtube, but Prob because of me having a mental illness, its becoming a (stupid) point-of-pride for me to install the software.
I have ' law enforcement called "Blazedvd" and other "Advanced dvd player", who would do ANYTHING EXCEPT play a dvd... I can't go on any more on my own... :(
Trust him to be 'Boxing day' so... :(
Thank you
I tried to look at 5 different dvd using VLC... 2 of them can be viewed. 3 of them are not. I do not know and can not walk why... :(
-5 all the dvd is in the format "PAL"...
========================================
Intermittent problems are difficult to solve. The question you
describe may have more to do with the DVD that the
Media Player.The DVD may require cleaning or they can be damaged.
The DVD can also be a problem with the region Code.
It is also possible that your DVD player needs to be repaired or
replacement.Sorry I don't have a better answer for you.
-
The satellite A40-151 DVD player will not play DVD
Hi my dvd player will play music CDs, but when I try to play a dvd, it is simply a beep and nothing don't get going I tried windvd and it lights up, but everything is blurred and still wont read dvd
Hello
Very bad situation here! What will you do now? Replacing the drive maybe?
-
remove the hp pavillion d4990y DVD player
I release the clip in plastic on the side and the DVD player to withdraw to halfway and stop. I can not find something else to delete or release. What is the secrt, please?
Hello
The only thing I can think to suggest is when you remove first the lever plastic to release the reader, to keep pulling the lever while sliding as the hunt - if it's any help, there is a guide (including a video preview) on the following link.
http://support.HP.com/us-en/document/c00619424
Kind regards
DP - K
-
Installation of the addon requires escalation of privileges
When I tried to install an add on for Photoshop CC 2015.5 on the Adobe add ons site in that I got an error the application Adobe CC who add it to cannot install because it requires escalation of privileges. I am running Windows Pro 64 bit build 10, 1607 and I don't have the administrator privileges. Any suggestions on how to fix this error would be greatly appreciated. Thank you.
Hi Bill, during installation, after clicking on 'acquire', you should see a pop-up message balloon in the lower right of the screen, in the systray. It does seem that tempoarily so you have to click on it when you see and accept the privileges. If you don't see it after you click 'acquire' even once, restart your computer and see for this arise when your PC is restarted.
-
Windows 7 update, showing the "verification requirements" when perform regular updates
Hello, Microsoft community!
After that the icon 'Get Windows 10' came, the next thing that happens when I check for updates and windows updates, I click on install. It should display "Download updates" but instead of showing "Download windows 10" after have finished downloading the updates and when you install updates, instead of showing "Installing updates" it showed "Verification requirements". Once, I thought this was actually installing windows 10 even if I don't check in the optional updates, but I've found that is not the case.
In my taskbar and hidden icons section, I noticed the icon as usual windows update, but it says "Download updates" "Installing windows updates" instead of these notifications windows 10 weird?
Help is greatly apperciated
You can find a solution more simple to: http://www.infoworld.com/article/2993131/microsoft-windows/disable-windows-10-upgrade-nagware-on-windows-7-windows-81-computers.html
Use the free GWX Control Panel app.
-
When I'm able to take my windows 7 installation from the dvd media when I do the installation?
I want to install windows 7 and I was wondering if I can take the dvd from the drive after the installation. Or should I keep it there to set up the hardware and install the video drivers?
I want to install windows 7 and I was wondering if I can take the dvd from the drive after the installation. Or should I keep it there to set up the hardware and install the video drivers?
Know not why you need to release the DVD (unless you are installing on multiple computers and you need the DVD as soon as possible - which case I suggest you get some 4 GB USB sticks and making the installation media bootable off of them for speed and flexibility in this situation - but once the files are copied and extracted - you can remove the DVD.
If you ask because you are caugfht in a boot loop - just change your BIOS settings so it starts on the second CD/DVD drive and the hard drive first and then determine what needs to specify the bootable media to power on the key combination (for example, Dell is F12) and the press who After turning on the machine until you get the selection menu and choose the DVD of the first hour and then ignore it from there on. -
Hi, I got problem with IE 9 RC. I posted here, but there is no solution! (I can't send mail to Hotmail).
I tried the final version of IE9, but the problem didn't slove. I tried to fix the Win7 + sp1 (upgarde) but it shows me this message:The following problems prevent upgrade Windows. Cancel the upgrade, perform each task and then restart the upgrade to continue.Your current version of Windows is more recent than the version that you are trying to level to. Windows is unable to complete the upgrade.Windows needs to be restarted if necessary to system files can be changed before you continue.The upgrade of Windows will affect the following programs or devices:These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.USB Virtualization: Stub virtualization USB driverThese programs may not work properly after the upgrade. We recommend that you uninstall these programs before upgrading. Cancel the upgrade, open Control Panel and search for "uninstall a program". (Note: programs marked as * can be reinstalled securely after the upgrade.)Age of Empires IIIand thank you.I tried wake SP1 with windows installation, but it did not work, I installed clean.
Thanks to you all.
Maybe you are looking for
-
Should I update my Mac pro OSX LIon 10.7.6 to Yosemite or El Capitan?
Should I upgrade my OSX Lion 10.7.6 to Yosemite or El Capitan? My Bank says that I have to go to access my account
-
Error 200428 creating task in DAQmx Base
I wrote a basic program that captures a voltage signal, plots and written to a file, but when I run it, I get this error message: "Error-200428 occurred at the value passed to the control task/channels is not valid." I enclose a copy of my VI. At fir
-
HP laptop computer 635: WIFI on HP 635 problem
Hello I just try my new card wlan Intel Dual Band AC 7260 2 x 2 AC + BC and I got an error that the dooesn can't BIOS supports the card. If I understand the Forums that the card works with a modded bios, but I want to avoid this approach. Is it an of
-
Vista and Quattro Pro x 3 runtime error
I use QuattroPro X 3 with Vista. These days, no Windows Update does not install and the attempt creates a runtime for QPro error. I can fix QPro with a cleaning of the registry and the difficulty of the H - KEY, but it happens every day. I never h
-
When I opened again I get this:I think the problem is that I went from the plans. Still doesn't have a link to the new plan as all other products, probably because it isn't in Adobe CC.In any case how can I associate still on my package?