Installation of the JDE 4.6.0... PREREQ JDK 5.0 (1.5) not recognized

Similar Questions

• The Z10 blackBerry Getting counter messages: "this tag is blank or not recognized.

  Hi all
  I started getting messages 'this tag is blank or not recognized' continuing on my screen. They appear every few seconds, accompanied by a vibration.
  He started out of the blue as I wasn't even using the device. I re-started, but it does not help.
  Someone knows what to do?
  Thank you!

  I had seen this happen to someone - who had stuck a card of NFC in their case... The BlackBerry kept reading the card (which was empty)...

• Installation of the OTA for Storm: "907 invalid COD. "Error HTTP 404: not found.

  Installation of Storm OTA:

  -----------------------------------------------------------------------------------------------

  COD

  -----------------------------------------------------------------------------------------------

  My request 'abc' has a big .cod file and > 64 KB. I extracted and produced 6 .cod files.

  ABC. COD

  ABC - 1.cod

  ABC - 2.cod

  ABC - 3.cod

  ABC - 4.cod

  ABC - 5.cod > 64 K

  ABC - 5.cod is always larger than 64 KB

  -----------------------------------------------------------------------------------------------

  JAD

  -----------------------------------------------------------------------------------------------

  However abc.jad file has files of 7 cod enteries

  RIM-COD-URL-6: abc - 6.cod

  RIM-COD-URL-5: abc - 5.cod

  RIM-COD-URL-4: abc - 4.cod

  RIM-COD-URL-3: abc - 3.cod

  RIM-COD-URL-2: abc - 2.cod

  RIM-COD-URL-1: abc - 1.cod

  RIM-COD-URL: abc.cod

  When you download it gives me "907 invalid COD. "Error HTTP 404: not found" error.

  -----------------------------------------------------------------------------------------------

  I also tried deleting after 3 enteries of the .jad file.

  RIM-COD-URL-6:

  RIM-COD-SHA1-6:

  RIM-COD-size-6:

  But it still gives the same error.

  -----------------------------------------------------------------------------------------------

  Emergency assistance is required.

  Alhumdulillah

  Problem is solved

  Mistake I made was that I have not put the .zip file on the Web server that was originally the .cod > 64K file.

• installation of the software for HP1610 and/or 4315 all in printers will not accomplish and crashes

  
  

  Hello

  Problem solved to my satisfaction.

  I went to ms config and follow-up instructions from hp and then opens the d\l file and press the remove software and the program began to install software for both printers, even if one of them was closed.  The two programs are installed by a stroke of luck...

  The icon detects now two printers.  The only thing missing is the other icons that came with the program, which I did not need.

  I think there is a problem with the software and it needs some more work for Vista...

  Roger

• The moderator last night found my problem of tracking both ed keys are corrupt. I lost the contact before I had the names of the two keys. My TSSTcorp cd/DVGW ts 552D is not recognized by windows XP. What are the two keys, please?

  No changes have been made to my computer.  The cd player is sometimes recognized by windows XP maybe once a month.  It is not playing audio files or music CD or movie videos either.

  I'll give you a link to an automatic fix for these two registry keys, but it really sounds like the optical drive is a failure. Replace an optical drive, it is very cheap and very easy to do.

  http://www.aumha.org/regfiles.htm - for MS - MVP cdgone - Elephant Boy computers - Don ' t Panic!

• I changed the case of a letter in my code and DW is not recognizing

  I get the following error:

  Warning: mysqli_connect(): (HY000/1049): unknown database 'vba2015_usermaster' inC:\wamp\www\VBAMF\Connections\mysqlitest.php on line 3...

  However, my code is composed as follows:

  $conn = mysqli_connect ("localhost", "root", "","vba2015_userMaster");

  Note the two red areas...

  It's on my test server (wamp). The correct format is a CAPITAL M, but DW will not recognize the shift. With the help of DW CC 2015.

  Any help would be appreciated.

  This error message is not from Dreamweaver, but MySQL. You are using Windows, so the default of MySQL is to store the names of database and table in lowercase and treat them in a case insensitive way. See MySQL: MySQL 5.6 reference manual: 9.2.2 identifier case.

  The recommendation for MySQL is to use the tiny all table and database names. This ensures maximum portability between operating systems.

  It doesn't seem to be an error in the line of PHP code that paste you here. The problem must be in the name of the database. PhpMyAdmin allows to check if it has been created.

• Satellite 1800 is not recognizing the hard drive of 80G

  I recently bought a store and save 2500 80 external to free up hard drive space on my laptop. Deliberately, I bought a disc that was backward compatible with my USB 1.1 (assuming) ports. When I plug it in, the external drive turns on and it beeps constantly but is not recognized by my PC. I tried the drive in a desktop computer and it works fine - so were excluded from the unit malfunctions. I uninstalled the USB drives and re-installed, etc, but no luck.

  Any ideas of what I can do?

  What form factor is this player 'record and store? It's a 3.5 "or a smaller as 2.5"? And how the HARD drive is powered? With two USB connectors or an external AC adapter?

  It would be useful to know some information about everything that solve your problem.

  Welcome them

• in error like sqlplus is not recognized the command

  Hi all
  I want to connect through the Cmd from windows.
  
  as
  C:\ > sqlplus
  gives error
  "sqlplus" is not recognized as an internal or external command
  operable program or batch file.

  Try to do

  echo % ORACLE_HOME %

  and then

  set PATH=%oracle_home%\bin\

• Simulators not appearing is not in the JDE

  My company has recently switched us to new computers using Windows 7, which requires me to re - install the simulators that I had used and the JDE (JDE is 5.0 and is necessary according to the needs of the customer).

  Initially, I've deployed the Simulator on the default folder, but got an error whenever I started it. The research forums, it was suggested that the error would leave if I have deployed in a different folder.  So, I have deployed the JDE in a different directory.

  Then, I tried to install the Verizon 9650 Simulator.  I have deployed it in the same folder that the JDE is deployed (for example simualtor is c:\...\dev\BlackBerry SmarthPhone simulators 6.0.0 and jde is in c:\...\dev\BlackBerry JDE 5.0.0). I stop the JDE during installation of the Simulator.  When I restarted the JDE, the Simulator was not visible in the list of Simulator (by default the simulators are and I am able to start them). Any thoughts on what I might need to do to get the JDE to recognize simulators?

  Thanks in advance,

  Dennis Brundage

  Simulator installers should update the JDE when they are installed.  Try one of these installers as administrator.  They probably fail update the installation location of the JDE.

  Or you can try to configure them manually.  To do so open the file SimPackage-# .rc located in the installation directory of the Simulator with a text editor.  Copy the decommentes lines (those that do not start with a #) and paste them into the SimPackage - JDE.rc, located in the bin of the BlackBerry JDE installation directory directory.

• Remove packages of the JDE Simulator?

  Is anyone know how you can remove packages of the JDE list Simulator without uninstalling them? I want to remove all the BONES ' are older that are running in the most recent d (ie the 4.5,4.6,4.7 of the list of Simulator JDE 5.0). After the installation of several packages of Simulator, I had to go back and change the memory allowed in the JDE default 256 / 512 M to 1024M so that the can load up. The only thing I can think of is the simulators causing the JDE in need of more memory for the files of configurations. But I think its crazy to the JDE go on using 256 MB or 1 GB for memory to load and run. And im using Windows 7 for my development environment.

  After some checking, it seems that there is some sort of threshold with the installation of the packages of Simulator and the memory required to start the JDE. I had 15 Simulator packages installed and it took 1 GB of memory to load the JDE, but once I removed several that I didn't use and he got up to 9 installed packages, memory fell to the bottom of the preload of 256 MB. But I still have not found a way to delete some individual packages JDE, it seems it's all or none with simulators.

• Installation of the Sierra

  It is essential to backup prior to installation of the operating system Sierra?

  Yes. It is always essential to backup before starting any kind of a major project as an upgrade of the operating system.

  Old saying IT: it is always best to have a backup, no need then to need a backup and not have it.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Portege 2000 - new installation using the PCMCIA CD-ROM XP

  I try to install XP on Portege 2000 using the official PCMCIA Toshiba CD-ROM drive.

  Install the XP disk boots fine, but after that Setup copied the files it blue screen (BSOD blue). I'm not very tech savvy, but I think it means that the BIOS can 'see' the PCMCIA CD-ROM, but that the real image of XP loaded by the installation program cannot, probably due to missing drivers for the PCMCIA CD-ROM?

  Then, I thought that maybe I could use F6 to load additional drivers during the initial installation, but it is beyond me to create the right set of files required. I know that you can download the Freecom drivers, but I don't know what are the driver files from CD to use and how to create from scratch the txtsetup.oem file right.

  Does anyone know how to properly use F6 and load the drivers for it?

  I found a lot of messages suggesting I copy the installer to the HARD disk and launch the installation from there. My problem is that the XP installation is an upgrade CD, so I will ask you at a certain time to insert a previous Windows CD and if at that time there I don't have a working CD-ROM drive...

  First post on this forum so be nice - I did a search but not find a thread with a real solution, but of course if I miss a please report!

  Edited by topic: beneix_1

  Hello

  I managed to install Windows XP Home the Portege 2000 using the PCMCIA reader but I ve used recovery disks original Toshiba which includes the correct driver for external optical drive.

  So far I tried not to install Windows XP Home edition, using the Microsoft installation disc.

  Maybe you should get the disks of facilities and not use this upgrade disk. I think that on this path, you will be able to install WXP as suggested when you copy data from facilities at the disk directly.
  Have you tried to get the original recovery disc Toshiba WXP?

• OfficeJet Pro 8000: installation of the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0

  I'm chasing a well-documented problem of my printer lost network connection after a variable period of printing to do not. The only way to connect is to change the power supply, but the printer may take 5 minutes to blow and grunts until it settles and prints...

  I put a static IP address on the printer (10.0.0.250) as well as an empty default gateway successfully, and the documents are printed after 5mins of blowing and grunting (save the regular lost connection which I'm hunting...).

  I put what I thought has a static IP address on the router to match (see image below), but now I don't know if it was necessary, and if the 'hosting of the fixed DHCP server' is correct. It might be useless and missleading...

  Using the configuration of the printer to 10.0.0.250 interface, it seems to accept the installation of the network when the default gateway is blank. With the help of 10.0.0.2 caused the 'page not found' error in my browser (Chrome).

  However, when you try to reinstall the drivers, the installer has grumbled to the default gateway is set to 0.0.0.0, which currently is the only way it will work...

  The Win7 PC is plugged into the router.
  The printer wireless to the router.

  ipconfig on the pc gives Ethernet card details below.

  So basically I have no idea what I'm doing...!

  ==============

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::c8e1:63ef:85e0:7 24% 13 c.
  IPv4 address...: 10.0.0.249
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 10.0.0.2.

  Router config.

  

  Thank you for your comments. It seems that I solved the problem of the default gateway. Time will tell if the remains of the printer connected through long periods of no use (see update below).

  It seems that the configuration of the router of the "DHCP fixed existing host" has nothing to do with the device assigned a static IP address. In fact, it seems that this setting prevents the printer through a default gateway of the router address.

  I noticed that when you give the PC a fixed IP, it connected through the router without any other configuration of router. If I reasoned that it may be applied to the printer also, so I moved the printer 10.0.0.251 and Bingo! the default gateway can be set to the IP address of the route.

  Since then I downloaded to other updates, which is supposed to correct the common problem of wireless printers, loss of the connection.

  I'll try to report in the next few weeks an update about the stability of connection network printers.

  UPDATED: May 23, 2016

  And more of the foregoing, my router support suggested I increase a parameter "timeout" from 24 hours to 10 days. I did it more than a week. Today, the printer worked after the impression of not for about 5 days