installation of the update does not password

Similar Questions

• Fix installation problem: "the update does not apply to your system.

  Greetings and thanks for reading.

  Currently, I am trying to fix a problem of high performance mouse. During the game, the mouse staggers moving (or 'looking', through the mouse) left or right . I tried two different mouse and the problem persists. The mice and their software, both work fine when connected to an XP system.

  By raising the solution, I found this support page that seems to match symptoms more than all other pages (with the solutions, I have already tried) I found: http://support.microsoft.com/default.aspx/kb/932653/en-us?p=1

  The page suggests that a service pack must be installed (already done) and otherwise, to try a fix .

  I got the patch in question, but when trying to apply the patch I am presented with an error message:

  "The update does not apply to your system."

  I understand that this question would happen if I had chosen the bits bad operating system (I chose x 86 for my 32-bit system, rather than the x 64 bit), but I chose the right bit system.

  I wonder how do I overcome this problem during the installation of the hotfix.

  I want to emphasize: I updated all drivers for the system (I had to shell out money for a driver update program because you are looking for that many drivers manually is virtually impossible), including the specific software for the mouse, the firmware of the mouse... None of them solved the problem. This fix may be my only remaining option to fix this mouse and I am unable to continue without help.

  Kind regards
  Luke

  mousesupport12345,
  Please post with the information requested here: what to post in the Windows Update forum

  Explain when you experience the problem.  It is only in the games?  If so, is it all games or only some of them?

  Clean boot your PC then test the mouse and see if the problem persists.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update Standalone Installer returns "the update does not apply to your system" Installer MSI 4.5 [KB942288]

  MSI 4.5 is required to install some software on the sub system, Setup MSI 4.5 returns "the update does not apply to your system.

  Windows Server 2008 SP2 64-bit Standard

  sfc/scannow does return no problem

  CBS. JOURNAL

  2011-11-10 09:19:30, v6.0.6002.18005 Info CBS responsible Servicing Stack with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\cbscore.dll
  2011-11-10 09:19:30, called CSI Info 00000001@2011/11/9:22:49:30.113 WcpInitialize (wcp.dll version 0.0.0.5) (battery @0x7feef748c85 @0x7fef2ef53ae @0x7fef2ec3ed1 @0xffb649a8 @0xffb630c9 @0xffb63578)
  2011-11-10 09:19:30, CBS News could not load SrClient DLL path: C:\windows\system32\srclient.dll.  Continue without the system restore points.
  2011-11-10 09:19:30, called CSI Info 00000002@2011/11/9:22:49:30.116 WcpInitialize (wcp.dll version 0.0.0.5) (battery @0x7feef748c85 @0x7fef2f386cf @0x7fef2f125d9 @0x7fef2ec3feb @0xffb649a8 @0xffb630c9)
  2011-11-10 09:19:30, called CSI Info 00000003@2011/11/9:22:49:30.117 WcpInitialize (wcp.dll version 0.0.0.5) (battery @0x7feef748c85 @0x7fef74f838d @0x7fef74f84ba @0xffb64207 @0xffb63125 @0xffb63578)
  2011-11-10 09:19:30, CBS NonStart info: check to ensure the treatment of start-up was not necessary.
  2011-11-10 09:19:30, info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x12df8d0)
  2011-11-10 09:19:30, CBS NonStart info: success, start, treatment not required, as expected.
  2011-11-10 09:19:30, info CSI CSI 809616 (0x00000000000c5a90) store initialized 00000005
  2011-11-10 09:19:30, CBS briefing: initialized 30187313:3612201472.
  2011-11-10 09:19:30, CBS information session: 30187313:3612201472 finalized.  Reboot required: no
  2011-11-10 09:21:33, CBS Session info: initialized 30187314:546129020.
  2011-11-10 09:21:33, CBS Session info: 30187314:546129020 finalized.  Reboot required: no
  2011-11-10 09:23:35, CBS Session info: initialized 30187314:1775756314.
  2011-11-10 09:23:35, CBS Session info: 30187314:1775756314 finalized.  Reboot required: no
  2011-11-10 09:25:38, CBS Session info: initialized 30187314:3005403140.
  2011-11-10 09:25:38, CBS Session info: 30187314:3005403140 finalized.  Reboot required: no
  2011-11-10 09:27:37, CBS Session info: initialized 30187314:4186893820.
  2011-11-10 09:27:37, CBS Session info: 30187314:4186893820 finalized.  Reboot required: no
  2011-11-10 09:27:43, CBS Session info: initialized 30187314:4247657872.
  2011-11-10 09:27:43, CBS Session info: 30187314:4247657872 finalized.  Reboot required: no
  2011-11-10 09:29:30, CBS info trap: package store indicates there is no element to clean, to jump.

  Advice please.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope that helps.

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• my creative cloud is not getting updated. the update does not start yet. There has been 0% for the last 24 hours now

  my creative cloud is not getting updated. the update does not start yet. It was 0% for the last 24 hours

  Hello

  Please follow the steps below and check it, if it helps:

  1 - click wheel settings in the upper right of the cloud creative app > Preferences > sign out

  2 force quit Adobe all activity monitor processes / end of task for Adobe on the process from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  3-

  MAC: Right-click on the icon in the Finder and select the 'Go - To' folder option. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol") ~/Library (It will open the folder of the user's library.)

  Then go to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  WINDOWS: C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE times

  4-

  MAC:  Go to the Apple icon > System Preferences > privacy and security > firewall > TURN OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  Go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be in ANY

  WINDOWS: see, turn the firewall on or off - Windows Windows help

  5 make sure there is no other Internet active safety program - if it is then go ahead and launch CC app and login and check

  Let us know if that helps.

  Kind regards

  Bani

• Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• The update does not apply to your system

  I can't run the help files which require winhlp32.exe. while I was trying to install the same.but I get the message that the update does not apply to your system,

  I use windows vista SP2 32 bit.

  Thank you

  Ankit,
  Here is an article about getting the winhlp32.exe for Vista. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

  Hello

  I will need to know the brand and model of the device in order to help you solve it.

  You see the device listed in the Control Panel, hardware and sound, scanners and cameras?
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: The system does not meet the installation requirements. the software does not support this versio

  1 LASERJET PRO CP1525nw

  2. Windows XP

  3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.

  4. no change

  Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.

• WinHlp32.exe for Windows 8 the update does not apply to your system

  I try to install WinHlp32.exe to allow the old program help files can be read, but when I try to run 'Win8-KB917607 - x 64' stops

  with this message "the update does not apply to your system"

  I download the correct file for my PC

  I tried many suggestions that are available on various sites without success

  I ran file system check on prompt without error and tried to re - run the program unsuccessfully.

  I would really appreciate the help

  Thank you

  It seems you must have U.S. English language pack installed and enabled in order for Windows8-RT-KB917607-x 64.msu run. Or there is a replacement winhlp32.exe solution directly. See http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/installing-winhelp32exe-on-windows-8-pro/03c15af2-0402-4098-96d9-6efe2ea2b545 for discussion of these two options.

  Kind regards

  Peter

• Need to update my Acrobat 9.0.0 Pro to 9.5.5 version. Where can I find the necessary files - because the update does not seem to react (not supported any more, I guess that)

  Need to update my Acrobat 9.0.0 Pro to 9.5.5 version. Where can I find the necessary files - because the update does not seem to react (not taken care no more, I assume that). I wouldn't be forced to buy a newer software in this way...

  You can get all updates from here: ftp://ftp.adobe.com/pub/adobe/acrobat/

  Remember that you must install in order, one after the other.

• I just installed for CS5 and my option for installation of the shares does not... How to install?

  I just installed for CS5 and my option for installation of the shares does not... How to install?

  I'm just not my palette actions checked.  Fact.  Thank you.

• crashed during the update does not start now

  my computer laptop gateway arrested during an update (not sure which). It does not start, I get a file missing or corrupt ntoskrnl.exe error. My repair disc does not work either, I read in the forum vista repair disks are not recognized if you instaledl a service pack. So if this is the case where should I go from here. I would be most grateful for any help. jpshan

  It seems that the update has affected your daughters to start.

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (you may need an Installation of Vista disc to do that)

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  ·        Bootrec /RebuildBcd

  If this does not work, then withdraws EasyBCD http://neosmart.net/dl.php?id=1 and run this process and see that helps.

  If not, then please repost your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where update problems specialists will be happy to assist with the problems you have encountered. Be sure to include the names and numbers KB ALL updates that have been installed before this problem started.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Speed dial installs, but the icon does not appear

  I used speed dial for a long time, both on my desktop and my laptop, and I really like it. Recently, I got a new office and installed the latest version of Firefox. Everything seems to be working well, but when I try to add Speed Dial, it appears to install correctly, but the icon does not appear in the menu bar. I tried several times and each time I like Speed Dial will be installed after I restarted Firefox. However, by clicking on the button will restart FF, but the icon never appears! What goes wrong, and how can I get Speed Dial to work for me, as it has always done?

  Dial manual > getting started - http://speeddial.uworks.net/gettingstarted.html (see paragraph beginning "when this extension is installed... »)

  • This is the same as the other buttons on the toolbar add - see: https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars#w_how-do-i-customize-or-rearrange-toolbar-items

  Complete manual of dial - http://speeddial.uworks.net/manual.html

• M40X-250: Installation of the OS does not work

  Hello

  I just tried to upgrade to a standard installation of XP Home Edition to a XP pro edition. When installing the note happens that the facility lacks a mass storage device driver. Later, when you restart the pc it does not get through the start-up phase. Bluescreen fraction of a second and it restarts give me mode without failure of the standard options - previous installation-... Option all lead to the same loop.
  So here are my questions:

  (1) is the HD a SATA drive and therefore not yet supported by Win XP pro (I couldn't find the exact specifications of the HD)
  (2) where can I find the drivers for this problem
  (3) is there a solution anyway...

  Any help is welcome...
  R
  PS. : Yes, XP pro is a legal full version...

  Hello

  As much as I know this laptop came with a HDD 60 common GB improved Interface (ATA-6). In this case you n t need to install all of the SATA drivers.
  In my opinion, it is another question.
  I think you should try to install the Chip Set Utility and other Hotfixes Microsoft. The best way is to install SP2. In addition, the Toshiba site, you will find a few patches. You must install these files in the order that is listed on the download site.

  Good bye