Installation of Web server for the deployment of an Application JDevloper
HelloI'm trying to convince my administrative staff to allow me to create J2EE applications. We currently have a campus wide license. We have learned by sales to deploy a JDeveloper 11g, would need us a WebLogic Server license. For now, we don't have the budget for the purchase of this license. Is it possible to deploy a 11g JDeveloper asks a WebLogic-no server? If so, is there a white paper to set up the server?
Thank you
Kelly
Currently, we support only officially 11g ADF for WebLogic deployment.
There is at least one report of a person running this on Tomcat here:
JDev 11.1.1.1.0 BC4J ADF + application on Tomcat6
Note that this will require you to have a license to run ADF however.
Tags: Java
Similar Questions
-
Options of the Web server for the Installation of the APEX on Oracle Database 10g
Hello. We are installing an APEX on a test server that runs the Oracle 10 g 10.2.0.4.0 database. As I understand it there are two Web Server Options:
(1) oracle HTTP Server (Apache)
(2) oracle Application Express listener
Do both of these jobs for Oracle Database 10 g 10.2.0.4.0? I thought I remember reading somewhere that only the Oracle Application Express listener only works with version 11 database or higher.Do both of these jobs for Oracle Database 10 g 10.2.0.4.0?
Yes.
I thought I remember reading somewhere that only the Oracle Application Express listener only works with version 11 database or higher.
No, only the restriction (except 10 g XE) applies to the third option of web server that you have not mentioned: Embedded PL/SQL Gateway (EPG), such as discussed in your previous thread: + {: identifier of the thread = 2201975} +.
Requirements for the listener of the APEX
{forum: id = 858} forum
-
installation of creative cloud for the deployment of the teams package fails
I inherited a Department that was using the trial versions of creative cloud and older versions of some CS6 apps so far. I bought and activated via the website admin CC for the teams. I downloaded and packed the app they need to use without errors. However, the first mac, that I tried to install it just quit with an error of unable to install, contact your administrator. I have did some research and came across the cloud to create adobe cleaner and followed the instructions... uninstall the current applications and run the vacuum cleaner. Error now says to contact the Publisher of the software. The first user is now dead in the water and does not all apps from adobe, trial or others to work on projects and deadlines looming. Any help would be appreciated.
The build package installs on my own mac that I used to create the deployment package
I think I solved it... the USB key that I used was not formatted for Mac OS, so I guess that there are names of files that are not compatible for FAT32 format it's originally to. thanks.
-
Installation of SQL Server for the virtual Center Server
Hi all
We bought 16 x 2 for ESX server CPU licenses. So, I will prepare a database of virtual server of the Management Center 16 guests. As SQL Server 2005 Express is installed during installation of Virtual Center Server but VMware is recommended for use only for 5 guests.
So I would like to prepare a database of SQL for VC server, please help me how to make the database to the virtual Center Server. Are there special tables, configuration, permissions. I have no experience with databases then how should I go with it. Is there a guide for it. The ESX Server installation guide explains only create ODBC connections.
Please help me with this I would be very obliged.
I know that the procedure is restrited 2 steps (1 and 2) on page 68, but you need to install and configure SQL Server for your business standard (I guess asking the C: or D: and data/newspapers on E :). I'm not going to explain better how to install SQL Server on a server. For the SQL Server database:
Step 1: you create a database storing the files on the right disk (with at least 30 GB) with a default database size to the size defined by the "Calculator" (value of + 15% on the line of your choice statistical level).
Step 2: On your Microsoft SQL Server, create a user of SQL Server database with the database rights of operator (DBO). The default database for the DBO User is that you defined in step 1. Make sure the database user has a role of sysadmin server or the role of database db_ownerfixed on the VirtualCenter database and the MSDB database. The role db_owner on the MSDB database is required for the installation and upgradeonly. This role can be removed after installation or upgrade process iscompleted.
The user must be created for your standard business as service account (password never expires) with a long and complex password.
Other steps in the document are for the ODBC connection.
Creating the tables is made during the installation of VC. Nothing to do. A characteristic is not to stop the SQL Server agent because some tasks are scheduled in the database to 'compact' statistics.
For the record, the database is upgraded when installing patches VC creating of new tables, updating of data type or...
-
How to: Perform a Firmware Upgrade using the integrated Web server for HP printers
Watch this video that shows how to perform an update of the firmware, using the built-in Web server for HP printers.
Hope this video is useful if you find that it had to update the firmware on your HP printer.
-
Strategy for the deployed application
Hello
I deployed a simple application to standalone WLS 10.3.5 in a mode of development.
The application uses oracle/wss_username_token_over_ssl_client_policy for the spirit of the Web Service communication.
When I opened the page, WLS generates the following error:
PolicySet invalid: WSM-06102 PolicyReference reference URI "oracle/wss_username_token_over_ssl_client_policy" is not valid.
What do I need to configure to ensure the validity of this policy?
Thank you very much for the support
DanielApplication of GOSA (wsm - MP) is not deployed in your WLS field or the data source "SDM-GOSA" is not targeted to the WLS managed server where you have deployed your application. If the "wsm - pm" application is not deployed in the area, you can deploy them by extending the WLS field with the "Oracle Policy Manager - WSM 11.x.x.x." model.
Dimitar
-
Cannot start web server on the executable file
Hello
We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.
As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.
I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.
When executing:
- The code will sit in the while loop until I press stop.
- Web server: Active Server = FALSE
- Out error = ERROR No.
In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">50ms>
It's the ini file to the executable file:
[WebTest]
server.app.propertiesEnabled = True
Server.OLE.Enabled = True
server.tcp.serviceName = "My Server computer/VI"
server.vi.propertiesEnabled = True
WebServer.Enabled = True
WebServer.TcpAccess = "' + * '"
WebServer.ViAccess = "' + * '"
DebugServerEnabled = False
DebugServerWaitOnLaunch = FalseAnd it is the Web server configuration file:
ErrorLog "$LVSERVER_ROOT/logs/error.log".
LogLevel 3
The default server name
DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
Listen 8000
ThreadLimit 10
TypesConfig "$LVSERVER_ROOT/mime.types»
DirectoryIndex index.html
LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
LoadModule LVAuth lvauthmodule
LoadModule LVSnapshot lvsnapshotmodule
LoadModule LVRFP lvrfpmodule
LoadModule dir libdirModule
LoadModule copy libcopyModuleAddHandler LVAuthHandler
AddHandler LVSnapshotHandler .snap
AddHandler LVRFPHandlerAddHandler dirHandler
AddHandler copyHandler"CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
KeepAlive on
KeepAliveTimeout 60
Timeout 60As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?
I tried the things:
- Copy a new default configuration file before the entry into force
- Writing a predefined file (encoded) before initializing config
- Definition to root before initializing directory (it actually generates an error because the server is not active...)
- Set WebServer.Active = TRUE several times inside the while loop
- Toggle the web server in the ini file
System:
- LabVIEW 2010
- PC with Windows 7 running
Thanks for any help, because it makes me crazy slow!
Ben
Hi Marco, thanks for the reply.
I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!
If anyone is interested, here's the problem:
The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!
This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.
AND
You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.
The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup
-
Want to download Personal Web Server for Windows Vista
Hello, where can I download Personal Web Server for Windows Vista Home Premium 32-bit? I can only find downloads for Win - 98. Thanks for any help.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-personal-Web-server
What happened to Personal Web Server?
Personal Web server is no longer available in Windows. Instead, use Internet Information Services (IIS).
http://msdn.Microsoft.com/en-us/magazine/cc163453.aspx
Read the above info.
See you soon.
Mick Murphy - Microsoft partner
-
PIX with H &; S VPN DMZ hosting web server to the hub
Ok
Heres a problem which I think would be quite common for these even remotely conscious of security. Unfortunately, my knowledge of the PIX (as well as other Cisco devices) is still in phase of 'growth '.
So, here's the problem. I have a WAN put in place with PIXen and SonicWalls, we are set up in a design essentially Hub and Spoke (fine ok so it is partially meshed). We recently decided to pull the trigger on getting a 'real' web site and everything went relatively well that getting up and rolling. (even with my notice of 3 days/deadline), but here's the problem: I set up the web server on the DMZ to the hub pix, and I figured out (the easy part) how to set things so in the Home Office, people can connect to the web server by using the internal address, but I don't know what to do for people in remote offices with VPN home connections. I tried to define static routes, I tried to add the DMZ to the VPN trigger, I tried to do both of the last things together, and I checked that I have rules allowing traffic to the VPN outside the DMZ on the inside. So, what else can I I get?
I have no problem by configuring a PIX for all basic ups and VPN even at this stage, I can do most of it through the CLI (even if I still want to do more through the PDM). My biggest stumbling block on the PIX has so far was when I actually involve this pesky DMZ...
I actually two PIX in my office, two for my network domestic (one for my place in the States and one for my place in the Japan), so if you can help me, I'll be the two problems and do not forget to give a rating of excellent reviews!
so I guess that leaves me to the place where I scream...
Help!
and I humbly await your comments.
the current pix configuration should look at sth like this,
IP access-list 101 permit
IP access-list 110 permit
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-md5-hmac superset
myvpn 10 ipsec-isakmp crypto map
correspondence address card crypto myvpn 10 110
card crypto myvpn 10 set by peer
superset of myvpn 10 transform-set card crypto
interface myvpn card crypto outside
ISAKMP allows outside
ISAKMP key
address netmask 255.255.255.255
isakmp identity address
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
now, to add dmz on top of the existing vpn, add the following to the pix (and apply the same concept on the remote end device)
access-list 102 permit ip
access-list 110 permit ip
nat (dmz) 0 access-list 102
-
second Web server on the DMZ not visible outside
With the help of a PIX 515e
I have several Web servers in the DMZ, the first web server and the mail server are set up with the port mapping for the PIX outside IP address of the interface.
The second and third (inside interface) of the Web servers are configured with static mappings and access lists.
I can see the first n the mail very good server webserver, but I can not see servers in second or third.
What have I done wrong?
I suggest you analysze traffic with the command to 'capture' PIX and sniff traffic on the DMZ and outside traffic.
Check if packets arrive to the external interface, if it reaches the web server and is at - it a response.
example of
IP access-list 120 allow any HOST 207.236.60.35
capture the access-list 120 vpncap OUTSIDE interface
See the access-list 120 retail vpncap capture
or
https://PIX-IP-address/capture/vpncap [/pcap]
To remove the capture:
No vpncap capture
sincerely
Patrick
-
DMZ web server->; inside the database server
Suppose that a network topology looks like this:
A PIX with 3 interfaces:
interface (private public static IP 10.10.10.1) interface (public static IP of 69.110.38.35) interface (static IP private address of the 30.30.30.1) --------------------------------------------
The internal network has a {server} with the IP address of 10.10.10.2.
The DMZ has a {web server} with the IP address of 30.30.30.2.
I will welcome external guests (outside) access to the web server (30.30.30.2) via port 80.
This web server access turn the database server (10.10.10.2).
Assume that all other commands are issued. Then, I'll create an access list that allows server WWW DMZ to communicate with inside the database server.
access-list dmz-to-inside permit tcp host 30.30.30.2 host 10.10.10.2 eq 1521
Should I publish the following, too:
(1) access-list dmz permit tcp host 30.30.30.2 no matter what 80 eq
(2) access-group in interface dmz dmz
(3) static (inside the dmz) 10.10.10.0 10.10.10.0 netmask 255.255.255.0
xlate clear 4)
If so, what each of them do?
Thank you for helping.
Scott
1. Yes, the static statement "10.10.10.0 static (inside, dmz) 10.10.10.0 netmask 255.255.255.0" will disable NAT. Although it is not necessary to disable nat, however, it saves money and simple to manage. the reason for this is the traffic between the dmz and inside is private, there is therefore not necessary to apply the public ip address.
2 pix receives the package intended to 30.30.30.2 10.10.10.2. PIX examines the static statement and based on the static above statement, pix will not nat package (i.e. pix will leave the soruce address be) and send it to 30.30.30.2 via the interface of the demilitarized zone.
for example
original package - source 10.10.10.2, destination 30.30.30.2
After pix - source 10.10.10.2, destination 30.30.30.2
3. the "Clear xlate" command must be issued whenever the nat/global or static has been added/deleted/modified. This command is to force the pix to clear the existing ip translation.
for example, before you add the command "static 1.1.1.1 (indoor, outdoor) 192.168.1.100 netmask 255.255.255.255", the pix may already have an ip 192.168.1.100 translation (it might come from the nat/global). now, after you apply the static command, the pix will keep the existing translation for a certain period time. 'clear xlate' is needed to erase the old translation and so to activate the new static statement.
-
I have a purchase order where my buyers can add to my form. I use a loop that adds an extra line when they add a new product. I'm storing the information in two tables different mySQL. The first is alll of my personal, the second is the elements. My personal records correctly. However, I get the following error when you save the items:
You have an error in your SQL syntax; consult the manual for your version of the MySQL server for the right syntax to use near 1, 'wer 2345', 1, 1)' on line 9
The error occurred in E:\webs\clarkwebhosting.com\SSL\esrc\order_add.cfm on line 74
++ After storage of the personal information, I take the command ID to populate the table of Articles
< cflock timeout = "5" >
< name cfquery = "qGetorderID" datasource = "#application.dsn #" >
Select max (orderID) as oid of orders
< / cfquery >
< / cflock >
< cfoutput > < cfset getoid = #qGetorderID.oid # > < / cfoutput >
++ Is the loop that I use to fill the table items ++
< cfloop to = "#form.numba # '1' = ' index 'idx' = >"
< cfset getqty = evaluate ("form.qty" & idx) >
< cfset getitem = evaluate ("form.item" & idx) >
< cfset getunit = evaluate ("form.unit" & idx) >
< cfset gettotal = evaluate ("form.total" & idx) >
< name cfquery = "insertItems" datasource = "#application.dsn #" >
INSERT in Articles
(orderID,
quantity,
agenda,
Unit,
total
)
VALUES)
< cfqueryparam value = "" #getoid # "CFSQLType ="CF_SQL_INTEGER">"
< cfqueryparam value = "" #getqty # "CFSQLType ="CF_SQL_INTEGER">,"
< cfqueryparam value = "" #getitem # "CFSQLType ="CF_SQL_VARCHAR">,"
< cfqueryparam value = "" #getunit # "CFSQLType ="CF_SQL_INTEGER">,"
< cfqueryparam value = "" #gettotal # "CFSQLType ="CF_SQL_INTEGER">"
)
< / cfquery >
< / cfloop >
This line: 1, 'wer' 2345, 1, 1 is the first element of the command line. Any ideas as to why it doesn't work? I use 5.5.9 - log CF9 and mySQL
My apologies... that should have been (note the quotes)...
In addition, it would be...
On another note... You should probably avoid using cfinput and simply use the standard form tags.
-
Satellite P200D-128: Toshiba has a Web page for the graphics card drivers?
Hi I want to update the driver for my card graphics ATI Mobility Radeon 2400HD with the updated driver, Toshiba has a Web page for the graphics card drivers?
Concerning the best and warm
Adrian WainerHello
All Toshiba drivers for European notebook series can be found on the European driver Toshiba page:
You can find it here:
http://EU.computers.Toshiba-Europe.com-> support Download Center &-> Download driversYou will find all the latest drivers published by Toshiba
-
Original title: how to solve this problem:
System error
You have an error in your SQL syntax; consult the manual for your version of the MySQL server for the right syntax to use near ')' at line 5
Hi Roger,
It seems that you have problems with the SQL syntax. The question you have posted is related to encoding and it would be better suited to the MSDN Community. Please report it in the community below.
http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home
Hope this is useful.
-
No VRM server registered with vCenter Server for the site 'Live '.
I have SRM 6.1 and vSphere replication 6.1 installed on both sites.
The ECP is connected to the vCenter server.
I get this error message: failed to create the protection group. No VRM server registered with vCenter Server for the site 'Live '.
Screenshot attached, no one knows what is happening here?
However, there was a mismatch in the meantime server on all except VRA in the remote site, it is now resolved and the issue disappeared.
Strange, how the error related to the site online, however.
Thank you for pointing me in the right direction.
Maybe you are looking for
-
I have two IPhoto libraries and in IPhoto, I can go from one library to another. One is called IPhoto (standard) library and the second is called IPhoto Library2. I find three files in the Finder, IPhoto, named Library.IPhoto and Library6.IPhoto, and
-
"Call the executable" allows the environment variable "path"?
Hello It seems that when you use the step type "call the executable" you need to enter the absolute path of the executable, or the absolute working directory, in the definition of "call settings" step. I seem not to be able to put in a *.exe by hims
-
analyze the 2 bytes at a time series data
I am acquiring 8 bytes of serial data and I would like to analyze the data in 2 bytes of data, so that I find myself with 4 measures of different temperatures. I tried a lot of things that I found in the forum, but I can't make it work. I have attach
-
Reactivation of XP after removing the DVD drive
I just removed my active computer DVD player. Why he told me that I have 3 days to reactivate when I rebooted?
-
Network and sharing Center could not load the
Questions:-Network and Sharing Center: Page failed to load-Unable to connect to internet, but says that it is connected to a network (have three PCs in net)-Guest of the continuous window - "problems and reports no longer."-By opening system in Contr