Network and sharing Center could not load the

Similar Questions

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• Network and sharing Center shows not connected, but the computer is connected to the wireless network

  When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

  Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

  Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

  Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

  It will be useful.

• Network and sharing Center does not open

  I get this error when you click "Open network and sharing Center" in the icon in the system tray wireless network connection.  In addition, same error when you click on "View the status of network and tasks" in the Panel.

  [Window title]
  : {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{8E908FC9-BECC-40F6-915B-F4CA0E70D03D}

  [Content]
  This file does not have a program associated with it for performing this action. Install a program or, if such is already installed, create an association in the default programs control panel.

  [OK]

  This all started with the question of the status of dead network icon (I'm under Win 7 Ult x 64): (http://social.answers.microsoft.com/Forums/en-US/w7network/thread/c3ee2c3f-82e5-44c7-8f40-ee7fb7f48c83)

  Found the answer, although I had to hit some unknown sites to get...

  http://www.Neowin.NET/forum/topic/597084-cant-open-network-and-sharing-Center-at-all/page__s__7f0aa9d03ff6176913fac7cf9fabe1de

  Here are the error messages which started my crazy searching for an answer:

  [Window title]
  Explorer.EXE

  [Content]
  This file does not have a program associated with it for performing this action. Install a program or, if such is already installed, create an association in the default programs control panel.

  [OK] [Window title]
  : {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{8E908FC9-BECC-40F6-915B-F4CA0E70D03D}\Advanced

  [Content]
  Windows cannot find ': {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{8E908FC9-BECC-40F6-915B-F4CA0E70D03D}\Advanced'.} Make sure you typed the name correctly and then try again.

  [OK]

• "Library not registered" in Vista Home Premium in network and sharing Center trying to activate the password protected sharing.

  Trying to activate sharing protected by password in the network and sharing window I get the error message "library not registered. Also, in media player, I get always an error of sharing multimedia. I think that the 2 mmight be bound. PLEASE HELP ME!

  Hi Dj,

  When he the accur first question?

  Have you tried a system restore to a point before the question accurred?

  You can follow the procedure as described below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow steps 7 to place the computer in his usual when you finished the clean boot troubleshooting

  Do the system restore to a date preceding the accurred question according to the link below:
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Reply back with more information for you to help

  Kind regards

  Kiki

• Network and sharing Center does not

  I run windows Vista premium edition
  Even though I am connected to Internet (wifi or lan), the Center says
  NOT CONNECTED
  and I cannot perform any normal setting

  Also clickking on the icon, it is said
  YOU ARE CURRENTLY NOT CONNECTED TO ANY network

  This prevents me from doing a lot of things, such as modifying properties or sharing...

  Thank you
  I think I solved in

  Just run a prompt as an administrator (right click on it and click on)
  "Open as Administrator") and then enter the following command line:

  net localgroup "Administrators'"NT Authority\Local Service"/ Add

  I found it on
  http://www.Vistax64.com/Vista-Networking-sharing/102034-Hella-problems-Vista-Ultimate-network-sharing-Center.html

• Network and sharing Center is not a work of al. screen is frozen. How ca I fix the problem!

  When I go to a sharing network, the screen is frozen. How can solve the problem thanks

  Hi MaurizioSpallino,

  Thanks for joining us on the Microsoft Community Forum

  To better understand the question please respond with the following information.

  1. You did changes to the computer before the show?
  2. You receive an error message?

  For now, you can try the troubleshooting provided in the following steps and check if they help to fix the problem.

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2:

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article.

  The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

  Keep us updated on the status of the issue.

  For any help about Windows, you can still post on the Microsoft Community Forum.

• Vista cannot open the network and sharing Center. Cannot open the computer properties. After trying to configure network options

  cannot access system restore and many other things

  Looks like I'm not the administrator more

  Hello david_).

  Thanks for the return of the response.  How antivirus software you use and what was the last full scan you completed on your system?  Did you run any software removal of malicious software on your system?

  Please visit the link below and follow the advice of THE C...  Please let us know status once it's over.

  Microsoft Answers: Malware

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/malware-called-antivirus-Pro-has-taken-over-my/3cb4a36a-6134-448C-A134-151d03fbd968

• Virtual WiFi not presentation, it disappears from the network and sharing Center.

  Original title: Virtual WiFi not presentation

  Hello

  I created Virtual Wi Fi cmd (netsh wlan), first it was created and posted his icon in the network and sharing Center, after that show how I disabled it from the network and sharing Center by clicking on the icon and pressing the button disable I pressed off it disappear from the network and sharing Center.

  Can someone help how to activate it so that I see her back icon in network and sharing Center.

  Thank you

  Hello

  You have virtual map of Wi - Fi enabled in Device Manager?

  This problem may occur if network settings are changed.

  You try to run the following command check if it helps.

  a. press on the key Windows + X.

  b. click on (Admin) command prompt.

  c. type the command netsh wlan start hostednetwork and press on Enter.

  If the problem persists, I recommend posting your query in the TechNet Forums to get help:

  8.1 Windows networking forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot turn off or disable password protected sharing the network and sharing Center

  I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

  I tried to disable Avira Antivir.

  I enabled the guest account and set its password to a string explicitly empty with net user guest «»

  Nothing helps.

  svampi,
  This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

  http://support.Microsoft.com/kb/947232

  Let us know if this can help, or if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista connected online but not shown on network and sharing Center or on the taskbar, leads to other problems

  I have a Dell Inspiron 1520 running on Windows Vista, my router modem is a Motorola SURFboard SBG901. A few months ago on this computer, I couldn't see that I was connected online either from right down icon in my taskbar (it shows just two monitors with an 'x', that when you highlight on he says "not connected, you are currently not connected to any network.")  I don't see it on my network and sharing Center which States: "not connected wireless connections are available." In terms of network it shows that my PC and then the line that has an x on him. If you click the x, or select diagnose and repair, he informs me that all is going well with my computer. If I go to connect to a wireless network, it shows that I'm connected to my network ready. I open one of my browsers and they all work very well, I can access any site without problem. I was not embarrassed with him at the time, but since then I moved into a new House and have a new service and everything, with this motorola modem cable. my new wireless network is a network unsecured, which of course, I want to fix it. I can connect to this network, but I can't access it through Windows properties to make sure. I read the manual of the modem, telling me to connect through an ethernet connection and access configuration manager using the ip address of my router on a browser, but which does not charge or the other. I have other devices (Ipod Touch and PS3) wireless I got other people come computers and they all detect the network but cannot connect to it. Thanks for any help.

  Hello
   
   
  I would like to ask you a few more things.
  1. how many network connections you have created?
  2. are there multiple NICs installed on the computer?
   
   
  Since this is a common problem and many users have solved this problem by using different methods.
   
  This can also occur if you frequently use several type of internet connections such as dial-up, Ethernet and LAN.
   
  As the article below also indicates that there could be multiple reasons for the same.
  The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected
  http://support.Microsoft.com/kb/945925
   
   
  Method 1.
  I ask you to remove any network connection if you have created and then check.
   
   
  Method 2.
  For control please check in mode safe mode with Networking if the problem exists.
  Here's how:

  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Center network and sharing Center shows "Page failed to load".

  On Windows Vista, Network and Sharing Center comes with a blank page except for text in the middle and says 'The Page impossible to load' steps, I tried:

  Clean boot

  SFC/scannow

  CHKDSK /r

  System Restore (has not only once other succeeded, but does not solve the problem)

  None of them have worked. I have reviewed the SFC newspaper and looked at DLL files, it says could not be fixed and replaced those with well known copies.

  A clean install is not a good option in this case either. My thoughts are that it is a corrupt DLL somewhere or a DLL that has incorrect permissions.

  On another note, I can't connect to wireless networks either. To be more exact, no networks appear in the list (I can connect by typing the SSID manually. The pop-up icon wireless in the status bar indicates "networks are available", but the list shows no. I believe that these two issues are related. Please give suggestions and connents, I appreciate all help.

  Thank you.

  Hello
   
  Do you remember any change to your computer before the problem?
   
  Search for related errors and Event Viewer .

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  You can uninstall the drivers for the network adapters in the Device Manager and reinstall the same.

  To uninstall the wireless device manager,

  1. click on Start , type Device Manager in the start search box and press ENTER.

  2 locate the network adapters and expand the same.

  3. Select the adapter, right click and selectUninstall.

  4 restart the computer, if prompted.

  Pilots should settle automatically after the computer restarts.

  Note: Before uninstalling the drivers from Device Manager, make sure that you have a backup installation files.

  Step 2:

  A. If not help, to create a new user account and check if the problem persists.

  B. Si the problem is resolved in a new user profile, then probably you had a corrupted profile and can be remedied .

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]