Installation of Windows 7 32/64 Asus M2NPV-VM daul bit product platform key blocked why?

Similar Questions

• Lost the disk for Installation of Windows Vista - can I use my friends with my product key?

  I am running Windows Vista on my computer at home, but I had this for a few years, and he began to have very slow, so I decided to completely erase the hard drive, now I know how to do this, but I need to re - install the OS when I'm done, but I've lost my Windows Vista installation CD , even though I still have my code/product key - it would be OK to use my drive of Windows Vista to friends with my product code?

  I tried this article: http://support.microsoft.com/default.aspx/kb/326246and he do not seem to answer my question - I'm trying to replace my copy, I just want to know if it is OK to use my friends?

  Yes.

  As long as it's a DVD from Microsoft and not a computer Manufacturer'e Recovery DVD.

  Read the information below.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to repeat the installation of Windows XP on my Acer Aspire One?

  How to repeat the installation of Windows XP on my Acer Aspire One? I have the key but I can see that the version of the Windows because label is damaged. They do not protect the foil label. Where can I download the windows installation? Thanks for your replies!

  Hi Luka Vetma,

  Windows XP is not available for download and it is no longer supported.

  You can contact the computer manufacturer to restore Windows XP on your computer or you can install Windows 7, for more information, see the links below

  Acer Support link

  http://support.Acer.com/us/en/default.aspx

  Purchase Windows 7

  http://www.Microsoft.com/Windows/buy/default.aspx

  10 reasons to buy Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/products/10-reasons-to-buy-Windows-7

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Note: It is recommended to backup your important data, before performing any installation of Windows.

• Installation of Windows 7 Key

  Can I use the same key for multiple installations of Windows 7 RC, or do I have to get a new key for each computer?

  You can use it on up to 3 installs. If you need other keys, go back to the download page.

  HTH.

• Blue screen: 0x7e during installation of windows xp

  original title: blue screen of death during the installation of windows xp

  I just bought a motherboard ASUS p5g41t-mlx with a Pentium E5400 2.7 GHz dual core and a hard drive when booting with the windows xp cd in, it goes through the initial configuration and is preparing to restart the computer when I get a blue screen (this is before we get to make a partition)

  It's basically my blue screen message

  problem detected windows stops to prevent damage of the model
  Check for sufficient disk space. If a driver is identified in the stop message, disable it or check updates,
  try changing video cards

  control the bios upgrade. Disable the bios memory options such as implementing caching or shading. Start in
  safe mode to remove or disable components

  STOP: OXOOOOOO7E (0xc0000005, 0xf748e0bf, oxf78da208, 0xf78d9f08)
  PCI.sys - address f748e0bf base at f7487000, DateStamp 3b7d855c

  "superbuddha" wrote in message News: * e-mail address is removed from the privacy * .com...

  I just bought a motherboard ASUS p5g41t-mlx with a Pentium E5400 2.7 GHz dual core and a hard drive when booting with the windows xp cd in, it goes through the initial configuration and is preparing to restart the computer when I get a blue screen (this is before we get to make a partition)

  It's basically my blue screen message

  problem detected windows stops to prevent damage of the model
  Check for sufficient disk space. If a driver is identified in the stop message, disable it or check updates,
  try changing video cards

  control the bios upgrade. Disable the bios memory options such as implementing caching or shading. Start in
  safe mode to remove or disable components

  STOP: OXOOOOOO7E (0xc0000005, 0xf748e0bf, oxf78da208, 0xf78d9f08)
  PCI.sys - address f748e0bf base at f7487000, DateStamp 3b7d855c

  Have you installed the drivers SATA asks to press F6 to install drivers from floppy drive?  Assuming you have this type of "new HDD" with your new motherboard.  (small cable from motherboard to the drive instead of wide ribbon cable.)
   
  You may need to go into the bios of the computer to IDE mode to install the operating system.  Once installed, you can install the SATA drivers and then move into the bios SATA mode for the HARD disk controller.

• Windows updates failed prevent installation of Windows 10

  1. I correctly installed 10 Windows of Windows 7, but came back to Windows 7 because of a problem with a MIDI device. The routine was told that I could re - install Windows 10 at any time.

  2. I decided that I could solve the problem of device in Windows 10 and so decided to try a re-installation of Windows 10.

  3. However, since the return to Windows 7, there are four "chess updates" in Windows Update and these keep requiring a reboot, and Windows 10 is blocked to re - install until this is resolved.

  Failed updates are KB2970228, KB342058, KB2861208, KB2742613.

  These updates are NOT installed, so don't tell me not to remove from the update not installed because they are not there!

  I need to know how to stop Windows insisting I restart to complete installation, only for the installation fails and asking that I have to do over and over again.

  System: ASUS P8H67M Pro, Intel i5, RAM 32, Windows 7 x 64 Ultimate.

  Thank you

  Kenneth Spencer

  This question seems to have been caused by maintaining a registry which I think should be deleted after the completion of the update process.

  It is:

  Update\RebootRequired windowsupdate

  After the removal of the key, do NOT restart, but install updates is run and restart.

  It worked for me, after three weeks of boredom!

  Kenneth Spencer

• Unable to band Nike fuel of installation under Windows 7

  Original title: fuel nike band download

  I'm trying to set up my Nike Fuelband, nothing helped. He tries to access Free Download Manager. I am told an error message: "the Manager has been incorrectly installed. I'm trying to find the program in my system to uninstall and reinstall, and I'm not?

  I have a laptop Asus n61j 2010, Windows 7 with all updates?

  Hi Phil,

  From your description, I understand that you can't Strip fuel Nike of installation under Windows 7.

  What browser do you use?
  
  We will run the following fix - it and check if you can uninstall the free download manager.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  After uninstallation of Free Download Manager, visit the following Web site and install the NIKE + Connect software.
  

  http://support-en-us.nikeplus.com/app/answers/list/p/3169, 3174/session/L3RpbWUvMTM3MDUyMjUwOS9zaWQvcXBpQTQzc2w%3D

  Also check out the following link:

  http://support-en-us.nikeplus.com/app/answers/detail/A_ID/20908/p/3169, 3174

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• Computer guard reboot during the installation of windows 7

  Hello world

  I just bought a desktop computer and put up my car, it consists of a z - 87 asus mother board I just bought with 32 GB Patriot memory, processor intel i7 and when I install windows and get to the point where it asks me to put in the name of the computer, and as soon as I hit next will be the remote computer.

  at first I thought it was the hard drive, so I bought a new 256 SSD disk scan and its still doing the same thing.

  What should I do, all the parts in the PC are brand new.

  Thank you

  Moved from the center of Community Participation.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Reduce the amount of RAM installed on a single key and proceed with the installation of Windows 7. If the installation is successful, you can reinstall after the extra RAM.

  Also, if you have more than one attached internal storage device, disconnect all but the target device where Windows 7 is installed.

• How can I re - install Windows 7 on my computer if I ever had the installation for Windows 7 disk? (ENGLISH-SPANISH)

  How can I re - install Windows 7 on my computer if I ever had the installation for Windows 7 disk?
  I have a laptop with Windows 7 installed on it, Original but I do not have the installation for Windows 7 disc, since I bought the computer I had never the disk. How can I re - install Windows 7 without having to purchase another license?
  How I can restore Windows 7 en mi computadora TR nunca he tenido el disco instalacion of Windows 7?

  I have a computer laptop ASUS not con Windows 7 original wont, pero no tengo el disco instalacion of Windows 7, from which the Adquira no he tenido el disco. How I can restore Windows 7 sin tener comprar otra license?

  Your computer may have a recovery partition which is accessible when you first start the computer (usually by typing the key F9 several times will begin the recovery process).

  This will reinstall Windows back to the point when you received everything first, therfore backup important data files (Documents, photos, music, etc.) on external before starting. Be prepaired to reinstall all the software can also be purchased and installed (rounding up of multimedia installation and product key codes).

  For more information contact the ASUS Technical Support: http://www.contacthelp.com/directory/Shopping/Computer+Hardware/Asus?ListingID=342

  J W Stuart: http://www.pagestart.com

• Mac lost during the installation of windows

  When installing windows on a MAC, I deleted my partition mac completely and I am now left with windows 7 to my mac book air. Y at - it an option to install mac, I don't mind losing the windows partition

  Hello smarthala,

  Thank you for using communities of Apple Support.

  I see that you deleted by mistake your Mac partition during the installation of Windows. The partition itself deleted or was it the Mac OS that has been erased, leaving an empty partition?

  If the latter, you can reinstall OS X from OS X Recovery. See this article for how that should be done: On OS X Recovery
  Otherwise, you can use Internet recovery (Command-Option-R, as opposed to the command-R) to repartition the entire hard drive and install the version of Mac OS X provided on your Mac. Who is finished, you can upgrade to El Capitan via the App Store > bought.

  Best regards.

• Bootcamp: Installation of Windows 10 USB cannot find bootcamp partition

  Hello

  I deleted the old partition 10 windows using bootcamp, upgrade of the space itself.

  I ran BootCamp again to set up windows 10 pro, as I had already installed on my end 2012 21.5 "iMac and the wizard successfully install on a USB stick, my Windows 10 ISO and any software downloaded from Apple.

  After restarting, start the configuration of Windows 10 until the selection of the partition.

  I, as the statement says, choose partition, BOOTCAMP and Format. Then I click Next, but the Windows says:

  "I can't create or find a partition...". »

  So I can't install it... What is going on? How can I fix this as never before appeared?

  Thank you

  Disconnect the external storage, perform the following two procedures and then only connect the USB Flash drive containing the installer W10.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• delete the partition after a failed installation of windows 10

  Hello world

  How is it possible to delete partitions, if in disk utility, there is no possibility to click on the '-' key?

  So I made a failure (several) attempts to install windows 10 on my new iMAC.

  I could download an ISO of windows and start the bootcamp assistant.

  In the last attempt of last night, I selected the bootcamp in windows installation partition, however, installing windows said it was impossible to read the hard drive.

  I then re-formatted this partition (BOOTCAMP) in the installation of windows, and after that, still could not read.

  Then, I deleted the bootcamp partition in windows and re-created a partition on "unallocated space" in the windows installation.

  Installing windows 10 still wouldn't move forward then I've bailed out and went back to OS X with the hope of turning it back on (again) by deleting partitions.

  I was unable to delete the Mac partition.

  Then, I deleted this partition (the one original bootcamp) and reformatted as OS x journaled. At least now, I can see the Partition.

  However in Diskutil, I was then impossible to delete this Partition. There is also a small partition 16 MB that cannot be erased.

  Wizard bootcamp will be past a pop up station: the startup disk cannot be partitioned or restored to a single partition.

  So I will now try to delete these partitions (the boy and the training camp original one) merge into the original and give then installing bootcamp, another go when I have a lot of energy!

  any help would be appreciated. I'm a little cautious to use Terminal command lines for fear of ruining my new computer.

  concerning

  Evan

  1. your iMac has a Fusion drive?

  2. don't mix to disk utility and Wizard of BC. They can lead to a host of issues.

  3. If you do not typos in the Terminal, they provide much more rich in detail. You have a Time Machine backup, put in place?

  4 can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Satellite C855 - installation of Windows 7 suspended

  I am trying to install Windows 7 on a Toshiba Satellite 855.
  At present, we have 8 Windows is installed. The computer runs about 05:00 and 23:00 without obvious problems. for example no 'blue screen of death '.
  Secure boot is disabled and the boot mode changed to UEFI to CSM.
  The computer starts correctly on DVD player and the message "starting Windows 7", then on the logo.
  Shortly after, the computer will not quiet i.e. no noise among readers and seems to stop and nothing happens. (we left on during several hours, just in case where)
  Different disks of Windows 7 have been tried with the same result.
  We also tried exchanging the hard drive completely and replacing it with a new drive with no success.
  The computer is now running Windows 8 back without any obvious problem, but we want to run Windows 7!
  Help!

  Have u tried to boot the installer of windows 7 on USB?

• Installation of Windows XP on new machines

  Hey, does anyone know if the latest machines Toshiba supports the installation of Windows XP,
  It is commonly accepted to support only Windows 7 and OS later?

  I tried to install Windows XP Pro SP3, 2008 version on the machine Satellite C660 released in 2011.
  and he crashed at the beginning of the installation. Is it possible that the Bios prevents
  forcing to work with Win 7?

  Or some drivers are missing in XP installation package, which makes XP incompatible with HW?

  On this forum, you will find number of threads where you can find answer to your question and also good explanation how to do to install Windows XP Home edition on the new laptop models.

  > I tried to install Windows XP Pro SP3, version 2008 on the satellite C660 released in 2011.
  and he crashed at the beginning of the installation.
  I assume that it happens because of lack of driver SATA. It must be loaded with F6 before installation of WXP begins. You can also create the installation disk of Windows XP Home edition with the integrated SATA driver. How to do this you can read
  http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  If you have any other questions you are welcome.

  By the way: you have created recovery DVDs before you started the installation of Windows XP Home edition?

• Satellite Pro 4300 series installation of Windows 2000 Professional

  Hi guys!

  I was given a 2nd hand Satellite Pro 4300 notebook PC series of my brother. Its shows be quite slugglish (over the start time of 20 minutes). I think I'm a format and a new installation of windows 2000 (windows 98se running sound) may be useful. However, I don't have the original recovery disk, although I own an original copy of Windows 2000 Professional.

  Would it not be possible to do a full format and install windows 2000? Or would I meet problems, for example with driver problems, later? I know computers cell phones can be a bit of a nuisance when it comes to facilities OS!

  Any help and advice would be much appreciated!

  Thank you!

  FONZ

  Hello

  Your machine should work very well with Win2K - Toshiba have drivers available for download.

  Kind regards

  Nick