Installation of Windows 7 OEM

Similar Questions

• Cannot complete installation of Windows 7 OEM on Precision T3400

  Can someone help me?

  I try to do a clean install on a Dell Precision T3400 with Windows 7 64 Bit OEM, but cannot complete the sequence.

  It goes through the sequence of the whole installation, restart a couple of times. He gets in the beginning of the sequence as "complete installation" - contribute to what, according to me, it's the final reboot - and then crashes. I think that what should come next is the bit where to enter information first name of computer use - time, date, place - time etc. I never get that much, however.

  I have not updated the BIOS. Previously Windows Vista - but the disk has been deleted - not sure if I can update the BIOS in this State.

  Another thing - I swapped the graphics card. The monitor of works well during the initial installation sequence.

  Any suggestions?

  Thanks a lot for reading.

  The suggestion above about SATA drives didn't really solve my problem, but it got me thinking in the right direction.

  Here's what I've learned about this through the answer and the answers on other forums above. It turns out be a common problem:

  It is usually caused by the lack of drivers for devices that are connected to the computer. Devices can include: any type of USB device (may be same mouse or keyboard), any type of hard disk, graphics cards and other types of cards such as PCI or PCIe Firewire. If you have a SCSI card then remove it permanently.

  I had a Dell keyboard with built in USB ports and a Media Player control. I swapped it for a simple vanilla ordinary keyboard.

  I also already swapped the graphics card that came installed on the T3400 for an older NVidia Quadro card as a fix for compatibility with my older monitors SVGA adapter.  When I searched on the NVIDIA site, I discovered that there is no Windows 7 driver for my graphics card, so I bought a DVI - I adapter that I needed the original card and replace.

  My problem turned out to be the graphics card.

  On other forums I have seen people solve the problem by removing the USB devices all THE. If you have a keyboard and a USB mouse, this may seem to be a problem. However, once you have initialized the windows 7 install process you can remove the keyboard and the mouse. Whenever the computer reboots it page and warn that any input device is fixed, but after a short pause, he must continue with the installation procedure. In my case, the fancy USB keyboard was certainly a problem too. Disconnected after initialization of the installation allowed the installation of two additional steps.

  I curse me Microsoft about this problem, but to be honest, I was not able to run a compatibility test of windows 7 on my computer. I bought it on ebay without an operating system. If I could perhaps it would have marked the graphics card problem and composite USB keyboard device.

  Don't know if it will work, but if you can't figure out what your driver problem, you can be able to run a hardware compatibility test and periperhals by a temporary installation of Ubuntu and connect it to the Net. I had no problem to boot Ubuntu from a USB key and the connection to the network.  It works perfectly first time without any of the usual shenanigans of Microsoft. In my opinion, Ubuntu is an operating system much higher with a much nicer user experience. My only reason to stick with Microsoft's older software. It's highly unlikely that I will ever consider buying a new system from Microsoft again. They lose the pedals after XP.

  Good luck

• I use Windows Xp OEM installation disc on another computer, if I have updated from Xp to Vista on a computer?

  I built a computer with Windows Xp OEM and then upgraded to Vista Home Premium SP1.

  I want to know to build another computer with the same Windows Xp OEM installation disc, is this possible?

  Possible? Yes.

  Authorized by the license agreement? N °

• Re-installing Windows XP (OEM - purchased version of njewspaper ad without mentioning it was OEM only) after the installation of the pirate Win Xp (full version). Can I retrieve pirate settings to not reinstall aps (have about 100). __

  Hello
  I'm trying to reinstall Windows XP (OEM - purchased version advertises in newspapers not to mention it was OEM only) after the installation of the pirate Win Xp (full version). Can I retrieve pirate settings to not reinstall aps (have about 100).
  (I guess I have to change registry to eventually replace OEM version with pirate version - it still would make it impossible to activate the automatic updates). Or I can just reinstall registry then replace edition OEM version? (Would still allow the applications to be installed without the re - install?) (A major pain).

  Visit the Genuine Microsoft software and click on Validate Windows.  After that validation fails, look for the Get Genuine button and click on it to find out how to acquire a Kit of WGA. Carey Frisch

• New installation of Windows 7 Home Premium 64 bit on Sony VAIO key OEM

  Hi all

  I recently bought a Sony VAIO VPCEB27FA, who is essentially a Middle East of the EB series model. The PC is literally loaded with all sorts of versions possible assessment and bloatware and it absolutely killed any computing experience. Windows 7 starts at more than 3 minutes. Yes, I timed it actually to see how long it takes for Windows load up before you can start actually using my computer. My old gateway desktop which is in reality a P4 and has Windows 7 installed on it opens in less than 45 seconds and is good to go. So I definitely do a clean install on my laptop to clean up all the UNWANTED horrible. But can I use the Windows 7 key on the back of my laptop after a clean install? I go to download the English version of Windows 7 Home Premium 64 bit of Digital River. Currently, my laptop has the same version that is the English version of Windows 7 Home Premium 64 - bit as mentioned on this page from Sony

  http://www.Sony-Asia.com/product/vpceb27fa

  Thank you

  PS: - You can see for yourself on the page of Sony in the specifications of the software INCLUDED, how trialware and bloatware been installed by Sony on this machine. I hate Sony for this and I will never buy a VAIO again in my life.

  There is no need to separately download OEM or retail of Windows 7 RTM installation DVD ISO, as the release of Windows 7 installation can be easily converted using simply the correct product key (for example OEM_SLP product key can convert an installation of Windows 7 at retail in OEM version), as issued by the OEM product keys has a different basis of the retail product key. For ISO of DVD images, the only difference between a Windows 7 RTM retail ISO and ISO of OEM of Windows 7 RTM is in position of EI.cfg file [channel], which specifies the sales channel to retail or OEM.

• Windows 7 OEM installation does not work immediately

  Hello

  I tried to install Windows 7 x 64 Premium on a new computer, but I still get this error: "A required CD/DVD drive driver is missing".

  I tried two Windows 7 different DVDs, including a new copy from NewEgg, and two of them have started successfully on the drive, so I really don't see what the problem is? I used two readers different external DVD, but what specific drivers for each drive could Windows even need? DVD players must be sufficiently interchangeable to avoid this problem.

  I found this article on the basis of knowledge: https://support.microsoft.com/en-us/kb/2755139, but after using two different DVDs, both manufacturers, none of this applies really, unless they have both missed the combustion.

  Means that the probable error, the installation media is corrupt. You can download and create a new copy of Windows 7 Home Premium, and then try again.

  Step 1: Download a copy of Windows 7:

  http://www.gHacks.NET/2016/02/17/download-Windows-7-and-8-1-ISO-images-from-Microsoft/

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Windows 8 OEM samsung original is disabled after the installation of windows updates.

  I have the original windows 8(Samsung Laptop) confirmed by Samsung as the original windows. Have this laptop for about 2 years now and have reset my windows again. But this time after the installation of windows updates, my windows are disabled and the watermark comes and it is said to activate windows. Samsung said support windows is authentic and check with Microsoft. But Microsoft has no support for 24 hours and support is not live at this time. Can someone help me with this problem. Please, I beg you. And I tried to put the key in the firmware to activate, but nothing helped. And the OEM key is invalid for activation at all.and add I activated my windows by phone before the update using the technique of slui 4... and after it started to update. And now reactivate cant using this key method.and calling OEM is not valid anywhere.

  Hello

   
   
  Please contact Microsoft Community.
   
  We regret sincerely all the inconvenience caused to you.
   
  I suggest you try the phone activation this time and see if it helps.
   
  a. at the start screen, drag from the right side, or hover your mouse on the top right of the screen to display the menu of charms.
  b. tap or click the charm of parameters.
  c. press or click on change PC settings.
  d. If your PC is not activated, computer settings provide instructions that are customized to your activation error. If telephone support can provide assistance for your mistake, tap or click the appropriate link, which may resemble one of the following conditions:
  > Activate

  > Activate by phone

  I suggest you refer to the following article for more information.

  http://Windows.Microsoft.com/en-us/Windows-8/activation-errors
   

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Kind regards
  Anusha

• Stand-alone installation Windows 8 OEM.

  Is it possible to install my Windows 8 OEM only from my HP "Recovery Manager" without all the other stuff installed either HP "factory setting" software.

  Thank you.

  Jeff.

  Hello

  No, the game of factory settings will install "Presets" on your machine. I saw no OEM version, but if you want you can try to download Windows 8 Microsoft then sit back, HOPE he accepts the key in the BIOS.

  Kind regards.

• Can't activate Windows 7 (OEM Version) after the installation on the new HARD drive

  Hello, recently my HARD drive crashed and I replace it with a new one, but after I reinstalled my window 7 (OEM Version), I can get it activated. The error code is 0xC004C017, I tried to activate using different methods, but the options given to me is only 1) buy a new product key online 2) try a different product key for activation of Contact 3) Microsoft to help solve this problem. There are no other options available to me as the activation of the phone.

  Please tell us how can I activate my Windows 7 on my new HARD drive.

  Thank you

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• DV7-6c95dx: installation of windows 7

  Acquired over machine without HDD - put in new hard drive

  1. have a windows product key, but does not check

  or-

  2. can I reinstall windows from a set of recovery discs

  Hello:

  Microsoft has removed the unlimited access to download W7 in February of last year.

  To download W7, you must have a full commercial product key.

  The key on your laptop case is for an OEM of W7 edition.

  If you have any disk installation of windows 7 Home premium, you can use that and the product key on your PC.

  If you do not, you can still order a set of recovery discs for your laptop on the link below...

  http://support.HP.com/us-en/mediaorder/HP-Pavilion-dv7-6c00-entertainment-notebook-PC-series/5169332/model/5210873/softwareitem/679228-002/STEP1

• Installation of Windows 7 Professional on a computer laptop windows preinstalled

  So yesterday, I did a check disk on C:, but since it froze because of some damage to windows, I force shut down (I'm sorry), but when windows came after that, the internet was off because the diagnosis Services policy has been down. After awhile, I realized that half of my registry was severely damaged causing most of the main as firewall programs and some services stop and does not start again. I checked all permissions, but nothing allows me to activate the services. My computer was really slow and freezing all the time anyway so I want to reset it to factory settings, or at least format my HDD, but the problem is that my HP laptop had Windows 7 Professional pre-installed on it so I have no disk to reinstall. Now I need help or opinnions popular on what to do, please someone help me on how to reinstall windows without the disc. (Restore doesn't work either) (I checked for the virus as well)

  Hello

  One option would be to create your own Windows installation disc, but you must always be able to read the activation key of 25 characters for Windows 7 Professional of your COA label - an example of a COA label can be seen here.

  You can download the Disk Image, you need from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a very respected source - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are by entering either your model number. or Nr here.

  Kind regards

  DP - K

• Help to perform a new installation of Windows Vista 64-bit.

  Original title: Clean Install.

  I am wanting to perform a clean installation of Windows Vista Ultimate 32-bit.  I would like to install Windows Vista Ultimate 64-bit.  I was told, during the custom Setup, that I could choose which bit to install.

  Hello

  With Vista, you do not boot from an external drive to install it.

  It is an option in Windows 7.

  And they told you to contact Microsoft for support.

  Microsoft does not provide support for OEM installations.

  In Vista, 32 bit and 64 bit come on different DVDs.

  See you soon.

• How can I get an installer for Windows Vista drive?

  Need windows on a drive!

  I have an acer aspire 5315 with OEM windows vista Basic. I want to perform a new installation of this version of windows on my laptop that there have been some problems (multiple annoying windows error codes) and want to start over. I have not provided with an installation for windows cd when I bought this laptop a few years again. I have a license for this laptop windows key but not drive! I am able to get one sent me free I paid initially for windows?  Thanks, Mike

  Hello

  Contact Acer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or ACER Alt + F10 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Installation of Windows 7 on SSD HP drive

  We have three HP 8300 Elite SFF machines in our headquarters. All came with Windows 7 pre-installed on the hard drives of 500 GB.

  I bought two genuine HP SSD drives (with 120 GB Intel), but cannot install Windows 7 on them because the provided installation HP discs report that the new disks are too small!

  I contacted HP about this and told me that the recovery disks only supports hard drives, initially installed on the machine, (i.e. 500 GB) or a larger size. I'd like a 960 GB SSD, but I'm not too keen on the cost!

  The obvious solution would be to buy packs of sale at retail of Windows 7, but I hesitate to buy expensive software when I already have a license.

  I had thought to resize the partition of HARD drive, less than 120 GB and copy of data across using a disk image but the facility could be optimized for a hard drive instead of the SSD, and it would probably go to default defragmentation!

  There is no work around that I could use to install Windows 7 from the restore disks original, I want to get these new discs work?

  Any advice welcome.

  Nigel.

  Please see "how to install Windows 7 without the disc" for instructions how to install a new copy of Windows 7 on your computer by using the key of HP OEM Windows 7 SLP/SLIC of factory (not the 25-digit number on the COA), the activation OEM HP certificate factory and BIOS of the computer. Please see below for step by step instructions;

  (1) download and unzip ABR Beta with Windows 7 Support. This is the homepage of ABR for Windows Vista. Please follow the section "How to use" for information and instructions on how to use it. These steps also apply to Windows 7. Perform the 'activation' backup and save the certificates and keys retrieved in several external locations. The key and the certificate for each computer should be the same. (He gets the certificate of your factory installed OS and HP preinstalled OEM factory original key)

  (2) install Windows 7, after all the guests as needed. Don't let not Windows try to scoped. Run ABR 'restoration of activation' to 'install' the previously saved until the product key and the certificate. Make sure that Windows is activated, repeat "restoration of activation" until Windows 7 is activated. (It "installs" pre-installed HP OEM factory original key and certificate from your factory installed OS to your new installation of Windows. This HP OEM key and certificate are what allows your computer to HP be factory preactivated.)

  (3) install all drivers from the computer. These can be found on the support page HP for your computer, or you can find newer drivers on the various websites of the manufacturers of component... Intel, NVidia, AMD/ATI, Ralink, Realtek, etc..

  Please click the White Star of KUDOS to show your appreciation