loss of frames, sometimes with XNET

I send you CAN frames with the XNET interface in CAN get out stream mode. Sometimes I lose CAN messages if they get too close. The messages are known that when running, so I have to configure a message (id, data length) manually (without data).

The screenshots show my CAN screw is there something I forgot in my initialization CAN?

Advertisement

XNET flush has a different meaning in the IO file - it means erase all pending message. When you call XNET write it will send immediately the message to the material - in other words the IO RAS file is automatically involved.

Tags: NI Products

Similar Questions

  • Problem with sending of master header with XNET API instead of CAN frame API

    Hi nice guys.

    I am using the XNET API to switch Master slave with LIN Protocol task. Since I have no prior experience, there is something problem as the Interface of the NI USB-8476 s cannot be detected. Gifts of windows prompted the following information:

    Error-1074384758 is produced in .vi:1 XNET create Session (single-point output Signal)

    Possible reasons:

    NOR-XNET: (Hex 0xBFF6308A) the name of the interface does not specify a valid and existing interface. Solution: Use a valid and existing interface. These can be obtained by using MAX, XNET properties of the system, or the name of LabVIEW XNET Interface IO. If you use CompactRIO, see the topic "Getting started with CompactRIO" in aid of software and hardware OR XNET.

    but in the MAX of NOR, the device is detected as "LIN0. Even control interface entry in the examples NOR displays the error. But if I take the CAN API of frame, it works well.

    Does anyone have an idea. I'm so appreciate. Tanks in advance.

    Best regards

    Melo

    Dummy me, know that the XNET API still do not support the NI USB-8476 s, which I am applying.

    Kind of hard to use the API NEITHER of MAY to get the feature I need, that seems easy to get with the XNET API.

    Problem solved!

  • iMac 5 k - restart during work - sometimes with Kernel Panic

    Hello

    my computer restarts during my work 1 or 2 times a day. Sometimes I get a kernel panic Message.

    Here's my report from panic. Maybe someone can read it. :-)

    iMac 5K (end of 2015), OS X El Capitan 10.11.6, with all updates, no device on the USB Ports, software: Adobe CC, Suitecase, uptodate all.

    Thu Jul 21 09:14:21 2016

    Panic report *.

    panic (cpu 1 0xffffff80127b3bf2 appellant): "pointers element of invalid queue for 0xffffff803bb1a220: 0 0"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.60.10/osfmk/kern/queue.h prev: 241.

    Backtrace (CPU 1), frame: return address

    0xffffff92e227b980: 0xffffff80126dab52

    0xffffff92e227ba00: 0xffffff80127b3bf2

    0xffffff92e227bb80: 0xffffff801274ae14

    0xffffff92e227bd00: 0xffffff801274e94b

    0xffffff92e227bf20: 0xffffff80127cecef

    0xffffff92e227bfb0: 0xffffff80127ec475

    The process corresponding to the current thread BSD name: QuickLookUIHelpe

    Mac OS version:

    15G 31

    Kernel version:

    15.6.0 Darwin kernel version: Thu Jun 23 18:25:34 PDT 2016; root:XNU-3248.60.10~1/RELEASE_X86_64

    Kernel UUID: B5AA8E3E-65B6-3D0E-867B-8DCCF81E536C

    Slide kernel: 0 x 0000000012400000

    Text of core base: 0xffffff8012600000

    Text __HIB base: 0xffffff8012500000

    Name of system model: iMac17, 1 (Mac-65CE76090165799A)

    Availability of the system in nanoseconds: 2177394476284

    last load kext to 122437533229: com.apple.filesystems.smbfs 3.0.1 (0xffffff7f9324d000, size 413696 addr)

    Finally unloaded kext to 166562274377: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f94786000 size 40960)

    kexts responsible:

    com Apple.filesystems.smbfs 3.0.1

    com Apple.filesystems.afpfs 11.0

    com Apple.NKE.asp - tcp 8.0.0

    com.apple.driver.AppleTopCaseHIDEventDriver 86

    com.apple.driver.AppleHSBluetoothDriver 86

    com.apple.driver.AudioAUUC 1.70

    com.apple.driver.ApplePlatformEnabler 2.6.0d0

    com.apple.driver.AGPM 110.22.0

    com.apple.driver.X86PlatformShim 1.0.0

    com Apple.filesystems.autofs 3.0

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.driver.AppleMikeyHIDDriver 124

    com.apple.driver.AppleMikeyDriver 274.12

    com.apple.driver.AppleHDA 274.12

    3.12.7 com.apple.driver.AppleGraphicsDevicePolicy

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com.apple.kext.AMDFramebuffer 1.4.2

    com Apple.Driver.pmtelemetry 1

    com.apple.AMDRadeonX4000 1.4.2

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.driver.AppleIntelSKLGraphics 10.1.4

    com.apple.iokit.IOBluetoothSerialManager 4.4.6f1

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleHV 1

    com.apple.driver.AppleThunderboltIP 3.0.8

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.6f1

    com.apple.driver.AppleIntelPCHPMC 1.1

    com.apple.driver.AppleIntelSKLGraphicsFramebuffer 10.1.4

    com.apple.driver.AppleSMCLMU 208

    com.apple.kext.AMD8000Controller 1.4.2

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.driver.AppleMCCSControl 1.2.13

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 38

    2.8.5 com.apple.iokit.IOAHCIBlockStorage

    com.apple.iokit.AppleBCM5701Ethernet 10.2.0

    com.apple.driver.AppleSDXC 1.7.0

    com.apple.driver.AirPort.Brcm4360 1040.1.1a6

    com.apple.driver.AppleAHCIPort 3.1.8

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleACPIButtons 4.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 4.0

    com.apple.driver.AppleAPIC 1.7

    com Apple.NKE.applicationfirewall 163

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.security.SecureRemotePassword 1.0

    com.apple.driver.AppleHIDKeyboard 181

    com.apple.driver.AppleMultitouchDriver 304.12

    com.apple.driver.AppleHIDTransport 5

    com.apple.driver.IOBluetoothHIDDriver 4.4.6f1

    com Apple.kext.Triggers 1.0

    com.apple.driver.DspFuncLib 274.12

    com.apple.kext.OSvKernDSPLib 525

    com.apple.iokit.IOSurface 108.2.3

    com.apple.iokit.IOSerialFamily 11

    com.apple.driver.CoreCaptureResponder 1

    3.12.8 com.apple.driver.AppleGraphicsControl

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.6f1

    com.apple.iokit.IOBluetoothFamily 4.4.6f1

    com.apple.driver.AppleHDAController 274.12

    com.apple.iokit.IOHDAFamily 274.12

    com.apple.iokit.IOAudioFamily 204.4

    com.apple.vecLib.kext 1.2.0

    com.apple.iokit.IOAcceleratorFamily2 205.11

    com.apple.driver.AppleSMBusPCI 1.0.14d1

    com.apple.driver.X86PlatformPlugin 1.0.0

    com.apple.driver.IOPlatformPluginFamily 6.0.0d7

    com.apple.kext.AMDSupport 1.4.2

    3.12.8 com.apple.AppleGraphicsDeviceControl

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.driver.AppleThunderboltEDMSink 4.1.1

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.AppleSMBusController 1.0.14d1

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

    com.Apple.Driver.USB.Networking 5.0.0

    com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

    com.apple.driver.CoreStorage 517.50.1

    com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

    com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

    com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

    com.apple.driver.AppleThunderboltNHI 4.0.4

    com.apple.iokit.IOThunderboltFamily 6.0.2

    com.apple.iokit.IOEthernetAVBController 1.0.3b3

    com.apple.driver.AppleUSBMergeNub 900.4.1

    com.apple.iokit.IO80211Family 1110.26

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com Apple.Driver.corecapture 1.0.4

    com.apple.iokit.IOAHCIFamily 2.8.1

    com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

    com.apple.driver.usb.AppleUSBXHCI 1.0.1

    com.apple.iokit.IOUSBFamily 900.4.1

    com.apple.iokit.IOUSBHostFamily 1.0.1

    com.apple.driver.AppleUSBHostMergeProperties 1.0.1

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 417,4

    com.apple.iokit.IOStorageFamily 2.1

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 4.0

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    com Apple.KEC.corecrypto 1.0

    Have you added or replaced memory modules?

  • Conversion .swf video without loss of frames

    This question was asked and responded poorly to a few times already. Specifically, on an Apple computer, it seems there is no way to get a video file (.mov, .mpg or other) off Flash Pro without severe loss of quality or the complete destruction of cadence.

    My .swf files are fantastic, just as they are supposed to. The room at the right pace and everything works as I set them up. When I go to export it as .mov or .mpg, the pace accelerates and slows down according to the objects on the screen. I played with the settings constantly, hitting the quality down to almost the smallest settings (something I'd not rather after having worked very hard on my part) as well as setting the frame rate options in all the senses to see if something has changed. Nothing. I've been reading a forum where Flash creators have the same problems and are tearing their hair because their work is essentially useless being stuck in Flash.

    I know that there are programs that convert files .swf video very well, some of them cost about $100. Why buy Flash in the first place, if you need to buy a new one, almost as price software just to get your Flash content? I also know that there are hundreds of free video converters out there for Apple, none of them seem to be able to manage the .swf format, but can do pretty much everything else. In addition, I know that for windows, there is the .swf Iwisoft free video converter that works very well, but does not support Apple created the .swf files when carried through on a PC. How is it that this software is free and easy on a Windows machine, but not a Mac?

    I'd like if someone from Adobe could answer some of these questions because I've been everywhere on the web looking for an answer to which nobody seems to have the right one. Most people can suggest a good video converter that works for them, but they have not tried on a .swf file and when the original user tries, it doesn't work and the thread died there. Any suggestions?

    @Dr. Silky - I saw the converter about newspapers at the time the conversion must have tried.  As you may have guessed Flabaco was designed for the shorter length animations, but it can handle animations longer - it takes more time and server resources.

    I forced the conversion of your swf file (I guess I got the correct swf) and he must now be converted.

    This necessary conversion manual intervention, but if there are users of such requirements, I would like to make these possible conversions.

    To download the converted videos, goto www.flash-banner-converter/converter using the same browser you used. As long as the browser cache has not been cleared or until the Start Again button was not clicked, you will see the converted videos.

    If you can't see the videos mail me the name of the swf file and I'll send you a direct link. (use the email address listed on the support page that you might not want your content exposed on a public forum)

    The videos are in 3 formats - webm, mp4 and ogv.  The quality of each of these videos can be different and you can choose the one that suits you best.

    Note: The number of tokens / series of conversion was R1328993157691 * _ * _ *. You will see this number on the converter page (but not the home page). (If you see a different number, this means that I forced the conversion of the wrong SWF.)

    Would be happy to help you with any conversions more you have - after all its an opportunity for Flabaco to improve and become more useful.

    Kayo.

    Flabaco (banner Flash Converter).

  • my hp df800 digital picture frame works with a Mac desktop computer?

    A bought a desktop imac computer and am trying to connect my HP digital picture frame to this PC.  Can connect but can not get any further with it.  I need to download something to help, or is - this just works with Windows PC?

    Ntgerh64, welcome to the forum.

    Page 12 of the user guide it lists the versions of Windows.  I couldn't find any mention of your Mac OS.

    If your problem is solved, please click "accept as a Solution.

  • Problem with XNET start VI after the creation of sessions

    I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

    The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

    It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

    What I'm missing to get the interfaces online and ready before you send anything?

    I was able to solve this problem because they did not actually XNET screw sorry for this post.

  • CAN frame API with two bus

    Hello

    I use a PXI-8461 to control 2 CAN bus lines.

    When I run the bus monitor to the MAX, both work correctly (frames are coming).

    But I lost a day now to try to make the two lines operate in my application.

    I call ncConfigCANNet.vi and ncOpen first with CAN0, then with CAN1.  ncOpen with CAN0 gives me an objHandle, but when I ncOpen cann with CAN1 after that, I get objHandle = 0 but no error!

    (I do not use error entries)

    So in my application CAN0 is running, CAN1 finally returns an error when I try to read using the objHandle (s is 0).

    I even tried to use the example of NEITHER "Multiples CAN Frame API maps unique DAQmx map Input.vi" with the same effect.

    Is there a known issue with this subject?

    I use

    NI-CAN 2.7.2f2

    LV 8.5.1

    PXI8461 with CAN0 and CAN1 working with the MAX busmonitor

    100g Ritter Sport chocolate / hour

    Sorry, my fault.

    I was able to solve the problem. My length of read - and write-queue was too big. I was using 100 for each queue. This works for a CAN interface, but not for 2. And, Yes, there is an error message... I lost this error somewhere in the error handling.

    Something beautiful that I used for the first time here is the network debug function for the executable files. Really cool and useful.

    Detective Conan!

  • PC cable loss of internet connection with router WRT160N V2

    I'm new to routers and I just added a router WRT160N (V2).  Wireless through my laptop is great. However, I have 1 PC connected physically to the router. The internet connection is sporadic on this PC. I have "wireless" internet service high speed and sometimes you click internet or check your emails, and there is no internet connection. It seems to be after the PC has been idle for a while. When you click on the internet icon PC on the router not even flashes her - it's like the PC and the router do not speak. If it does not connect, the connection is great. Any help would be appreciated!

    There is a known problem with intermittent connectivity and firmware to build 11 for the WRT160N V2. 11 is the current firmware on the Linksys site. Check if you have 11 build if your router is a V2.
    Downgraded to build 8 fits usually correct these deficiencies, but Linksys told several people that they do not have firmware version 8 to give end users.

    It's ONLY for the WRT160N V2 router. This firmware will not work on WRT160N V1.

    You can find it at http://audipages.com/router/

    Follow download them and instructions to downgrade firmware on this page.

  • File WMV loss of frames

    I loaded the WMV files that work fine in Windows Movie Maker. But the same files in 14 first are frequently gel on a frame and throw many following executives. The audio is fine and in sync with the images that are displayed. These are currently the only files in my project and thus the first loaded files. I am new to Adobe Premier so I guess I did something wrong. But what? This seems so basic.

    The f

    Thanks for the very useful troubleshooting information.

    In reading properties, a property flares, in other words, the video "mode = variable frame rate". Premiere Elements (many versions) does not fare well with video recorded with a variable frequency. The typical remedy is to file in the free program of brake in hand to get the H.264.mp4 with the version of constant frame rate, and then import them into Premiere Elements with Premiere Elements project ' add media/files and folders.

    In the video tab of the hand brake section, remember to set the frame rate to a value of 30, and dot the constant.

    If you need how with Handbrake for this purpose, please do not hesitate to let me know and I'll post screenshots if necessary. It's fast, easy and effective.

    https://handbrake.fr/

    Please update me on your progress as your schedule allows. For any question or need for clarification on this, feel free to ask.

    Thank you.

    RTA

    Add on... I need to get more information on my side video wmv3 codec... the handbrake conversion to take care of video compression, but also the issue of variable frame rate... allow us to see how that turns out I think that the differences between the video codec, wmv, wmv1, and al.

  • Strange Frame Drops with button actions

    Hello

    I am so confused about this

    I have the button in the layer of Framework 1 1 with the instance name: enter_mc

    I also put this script in this context too:

    Stop();

    enter_mc.buttonMode = true;

    enter_mc.addEventListener (MouseEvent.ROLL_OVER, onButtonOvers);

    enter_mc.addEventListener (MouseEvent.ROLL_OUT, onButtonOuts);

    function onButtonOvers(e:MouseEvent):void

    {

    MovieClip (enter_mc), .gotoAndPlay (18);

    }

    function onButtonOuts(e:MouseEvent):void

    {

    MovieClip (enter_mc), .gotoAndPlay (40);

    }

    enter_mc.addEventListener (MouseEvent.CLICK, bobou);

    function bigili(event:MouseEvent):void

    {

    MovieClip (root) .gotoAndPlay (2);

    }

    the problem is, I have some mask on image effect in about 110 images just after image 1 in other layers

    but when I test the movie after clicking on the button of the gotoAndPlay (2) works well, but after that my animation mask played very fast! something like 100 Fps or more!

    I just can I solve this problem by doing one of these options:

    1 - keep the button 1 to 110 images!  and I don't want it because I want only in frame 1 and then click on my disappear just button!

    2 remove

    enter_mc.addEventListener (MouseEvent.ROLL_OVER, onButtonOvers);

    enter_mc.addEventListener (MouseEvent.ROLL_OUT, onButtonOuts);

    scripts!

    I try a lot of script use:

    enter_mc.gotoAndPlay (18);

    or

    ce. enter_mc.gotoAndPlay (18);

    MovieClip (enter_mc). gotoAndPlay (18);

    can someone help me to undrestand why it happened?

    ssssw.jpg

    Add this to your listener function click on:

    function bigili(event:MouseEvent):void

    {

    enter_mc.gotoAndStop (1);

    MovieClip (root) .gotoAndPlay (2);

    }

    p.s. Please check the useful/correct.

  • Frame content with multiple lines of text

    Hello

    In Indesign CS5 (Mac) is possible to get the same behavior as 'To adapt to the content Frame' pieces on a single line of text, to work with multiple lines?

    In other words, to adapt the framework to the height AND width of the text.

    We have black text and the text block has a fill and a stroke. What we are trying to achieve is to be able to quickly and accurately, resize it framework for however many lines it takes place in. By using the default behavior, so that we can use "mount the frame to the content" to get the height, but we need to manually drag the width.

    Thank you

    Try this (CS4/CS5):

    // Your Settings:
    var X_PRECISION = .1;     // pts
    
    // Some constants
    var     INNER = CoordinateSpaces.INNER_COORDINATES,
         MULTIPLY = ResizeMethods.MULTIPLYING_CURRENT_DIMENSIONS_BY,
         ADDTO = ResizeMethods.ADDING_CURRENT_DIMENSIONS_TO,
         AP_LEFT = AnchorPoint.TOP_LEFT_ANCHOR,
         AP_RIGHT = AnchorPoint.TOP_RIGHT_ANCHOR;
    
    function fitHorizontal(/*TextFrame*/ tf, /*str*/xRef)
    //----------------------------------------------------------
    // Fits a textframe width to its content
    // = adjusts the frame width to the optimal value without changing the height
    // xRef (opt.) is the reference pt: 'left'(default) | 'right' | 'center'
    // * You may invoke first tf.fit(FitOptions.FRAME_TO_CONTENT), i.e. fitVertical
    // * This routine supports rotated text frame
    // * Also, unlike the InDesign UI, this supports *multicolumn* TF
    //----------------------------------------------------------
    {
         // Default width multiplier. This value is only used if
         // tf overflows in its initial state. 1.5 is fine, usually.
         var X_FACTOR = 1.5;
    
         var ovf = tf.overflows,
              dx;
    
         xRef = AnchorPoint['TOP_'+(xRef||'left').toUpperCase()+'_ANCHOR'];
    
         // If tf originally overflows, we need to increase the width
         while( tf.overflows ) tf.resize(INNER,xRef,MULTIPLY,[X_FACTOR,1]);
    
         // Now, let's compute the maximal width variation (dx)
         dx = tf.resolve(AP_RIGHT, INNER)[0][0]-tf.resolve(AP_LEFT, INNER)[0][0];
         if( ovf ) dx *= (1-1/X_FACTOR);
    
         // Dichotomy on dx
         while( dx > X_PRECISION )
              {
              dx*=.5;
              tf.resize(INNER,xRef,ADDTO,[dx*(tf.overflows?1:-1),0]);
              }
    
         // Last step, if needed
         if( tf.overflows ) tf.resize(INNER,xRef,ADDTO,[dx,0]);
    }
    
    //----------------------------------------------------------
    // Sample code
    //----------------------------------------------------------
    
    // Assuming the user has selected a text frame
    var tf = app.selection[0];
    
    // Vertical fit (if you want it first --but not needed)
    tf.fit(FitOptions.FRAME_TO_CONTENT);
    
    // Horizontal fit (from the left edge)
    fitHorizontal(tf, 'left');
    

    @+

    Marc

  • Continual loss of wireless connection with Satellite C660

    Hello

    I hope that someone out there might be able to help.

    I've had my Satellite C660 for about 18 months now. Since the first day we had continual problems connecting to the wireless network. It connects but then lost the connection again a few minutes later, and then after a few more minutes, he reconnects. And the circle continues. An Ethernet cable didn't improve things.

    Initially, the problem is solved by leaving the laptop computer charger plugged, randomly that solved the problem and that is not ideal, I went with it because it worked.

    We have new broadband services and the router installed and the problem came back now, but this time the fix of power cable does not work, and once again an Ethernet cable does not work.

    The laptop is now continues to lose the connection, and it's very frustrating. I have 2 other laptops from Dell, 2 tablets, and they all work very well, never losing connection.

    Can someone give me it please advice on what could cause this problem and how to fix it (easily!).

    I can't wait to hear your thoughts and thank you in advance for your help.

    Glenn

    > Initially solved the problem by letting the laptop computer charger plugged, randomly that solved the problem and that is not ideal, I went with it because it worked.

    I think WiFi disconnects due to energy savings.
    As you say, linking the main specifications address the issue. I think because of the connection of the AC adapter, the laptop switches to another profile of power where Wlan energy saving is disabled.

    Therefore, I recommend to change the power profile that is used in battery mode.
    -> Panel-> power option choose the power profile that you use in battery mode
    Now, select advanced to change power settings
    You will find an option called settings of the adapter wireless (or something like that)
    The mode option of battery and AC adapter must use the performance parameters

  • Can I delete. TemporaryItems and .apdisk? (Sync OneDrive with iOS and Mac, sometimes with Win8.1)

    Hello

    When I look in the root of my file OneDrive structure, it looks like this:

    . TemporaryItems is empty, the .apdisk file looks like this:

    Can I delete. TemporaryItems and .apdisk or he will destroy the synchronization mechanism?

    Philipp BR

    Hi Philip,

    Please write us with the following details.

    You see these files even if you connect to your computer with Windows 8.1?

    You can go ahead a remove files that you mentioned if you don't need them.

    Open Internet Explorer In-private mode to check if you still see these files. When you start Private Browsing, Internet Explorer opens a new browser window. The protection that offers Private Browsing is in effect as long as you're using this window.  When you start InPrivate browsing, Internet Explorer opens a new browser window. The InPrivate browsing protection is in effect as long as you're using this window.

    To open Internet Explorer in session In-private open Internet Explorer and then press Ctrl Key + key Shift + P together.

    Let us know the status of the issue. We will help you.

  • Loss of Internet connection with windows 10

    I converted from windows 7 to windows 10 a couple of months ago, but he converted back yo windows 7, because I kept losing my connection to the internet. I'm thinking the back windows 10 conversion, but I want to make sure they were first solved this problem. They have?

    Hi Joe-

    What troubleshooting have you to determine what was wrong with your wireless connection?  Plug you in ethernet if necessary for a stable connection, and then install all the Windows updates, and then continue to look for more, until they have been offered?  And then in Device Manager did import you all the pilots who were missing or in error?

    Did you update the wireless driver from the model PC or device Web of Support download page?

    You right-click the wireless connection icon in the system tray to run the troubleshooter?  What it a report?

    What other measures have you taken before returning to the old operating system?

    It is possible that the problem was due to corruption in the old operating system in the upgrade, where we see a lot here.  So, since you have already activated the upgrade you can now do the much superior clean reinstall Windows 10 Upgrade which reactivates and must overcome almost all problems.  We can help you sort through everything else.

  • Trouble sometimes with WebView short Web page rendering

    I noticed sometimes in my application poorly rendered Web pages in a WebView because the webview appears dynamically size itself so that it is only as high as it should be... so if something to Center vertically, it appears at the top of the screen, not the vertical middle of the screen. There was even a Yahoo/Facebook login page that started small and has started to grow a few pixels per second!

    I tried to add:

    verticalAlignment: VerticalAlignment.Fill

    ... for the WebView to the ScrollView as if it is contained in and to the container that contains the ScrollView, but that doesn't seem to help.

    I found another post on the forum that answers this question:

    WebView {
        ...
        preferredWidth: Infinity
        preferredHeight: Infinity
    }
    

Maybe you are looking for

  • Firefox crashes when loading; He tries to restore a previous session. Cannot retrieve the crash report.

    When I try to open Firefox, I briefly see the program trying to open - address line says "restore session". Then it crashes. I get a screen saying 'We are sorry' 'Firefox has a problem and crashed. We will try to restore your tabs and windows when it

  • gray screen on mac mini

    Hello My Mac Mini server is running 10.6. Now when I start it, I get the Apple, then I get the circle with the line through it, then I get the flashing folder. I tried to reboot using the SHIFT key, as well as the command-r and neither work. I always

  • E4500 wireless problem

    I improved my E4200 to an E4500 and used the same network settings. I have notifications that my iPhone and iPad times randomly cannot connect to internet. Hard wired devices as my PC can. They just sit there and spin trying to access the Internet. T

  • Uninstall a program: how to remove Defender

    I want to replace Windows Defender with Microsoft Security Essentials, but I can't find Defender in my list of programs to uninstall.

  • DV6 1055ee process went 100% constantly - edited and moved from previous thread

    Hey guys,. I really need help but I have not found a similar topic to my problem, but it was that it was the closest to you. In any case, I have this gadget for windows 7 which shows my memory and addresses the use After installing windows 7, my 1055