Installation of Windows 7 on Compaq 610 cant needs CD/DVD drivers

Similar Questions

• Preparation of an installation of Windows XP Home edition CD with a MINIMUM required drivers for A200-1AX

  Greetings,

  I am trying to install Windows XP Home edition on my old days by Satellite A200-1AX. Today, I tried to boot from the CD of Windows XP Home edition or after the copy of the system files, the laptop produces the error that Setup did not find any hard disk during the Installation of Windows XP. I looked on the internet and found the following page:

  http://www.howtogeek.com/HOWTO/Windows/resolving-Setup-did-not-find-any-hard-disk-drives-during-Windows-XP-installation/

  Explains how to resolve this problem. So I try to make my own installation CD of Windows XP Home edition with the necessary drivers. My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running? It is not necessary to install the drivers for all the A200-1AX since the first installation of XP, I can always go back and install those remaining of the XP; but I don't want the installation process interrupted due to a missing driver where I have to repeat the process of manufacturing more install of WXP CD custom. The list of drivers and devices provided by Toshiba is too long to write on a single installation with XP CD.

  My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?

  Thanks in advance for your answer.

  Best regards, Ashraf.

  > My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running

  You will need to include only the Intel Matrix Storage Manger for the XP CD again. Without this iMSM XP will not see the HARD drive
  This driver is important. Other drivers can be installed after the installation of XP!

  > My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  There are 2 versions of BIOS; One for Vista and one for XP. Generally, the update of the BIOS must be made before the instillation of OS but you can also try to do after installing XP. In both cases, the update of the BIOS would be possible.

  > If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?
  Generally, Yes! Without the good BIOS features like the FN buttons could not work properly!

• HP ENVY m6-n113dx Notebook PC: new installation of Windows 8 on HP Envy and with problems of drivers.

  I have a laptop HP Envy M6 and it came with Windows pre-installed on it 8.1. I always do a new installation of Windows, whenever I have buy a laptop that I hate all the bloatware and stuff which they pre-install on it.

  Unfortunately, when I did, I found that the drivers on the HP website do not work for some things, especially my wi - fi.

  In Device Manager there are three things that make their appearance as having a problem:

  Network controller:

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  Unknown device:

  ACPI\VEN_HPQ & DEV_6001

  Unknown device:

  ACPI\VEN_HPQ & DEV_6007

  If anyone can provide me with some drivers work, I would be incredibly grateful. I called HP and they told me all I can do is to pay $40 for a CD delivered to me so I can reinstall the version of bloatware, and I really want to do. I want to use my real version of Windows 8 and not pay for something I don't even want.

  Thank you!

  Nevermind, I fixed it myself by reading old son of Paul_Tikkanen

  I used http://www.pcidatabase.com/index.php

  and found the diver that I needed, and now I don't have to pay $40 for the version of bloatware.  Yay!

  Thank you Paul!

• Installation of Windows 7 - error Code 66A Cant udate

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • 66A error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Please see the following thread for answers:

  http://social.answers.Microsoft.com/forums/en/vistawu/thread/1307e399-8997-41c4-9D3B-24f872425148

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Installation of windows xp on Compaq Presario CQ50-105EW

  Hello, I need drivers for my laptop for windows xp please help me

  goodfirneds wrote:

  MAM hopes ze chodzilo o

  Niestety nie do konca chodzilo o.

  Chcialem dostac dane jak ponizszym Guy terms przez Ciebie

  http://zapodaj.NET/f760b4c2c8f0.jpg.html

  DLA robokow denies rozpoznanych urzadzen. Dostalem tylko dla ethernetu.

  Problem z bezprzewodowka Zimmer zostac rozwiazany po zainstalowaniu ponizszego sterownika i sciagnieciu:

  Karta Bezprzewodowa Atheros tutaj

  Na pewno potrzebujesz install:

  Driver Modem Conexant HD tutaj

  Wedlug przeowdnika Cheryl i Rakhmad' has problem z dzwiekiem moze byc rozwiazany na dwa sposoby.

  Conexant High Definition SmartAudio 221 drivers (CQ50 CQ60 CQ70, G50, G60 G70) and przez znalezienie sterownika w Microsoft Update, lub sciagniecie go tutaj

  See in. creates ze potrzebujesz enthusiastic rozwiazania nieznanego urzadzenia dla zdjeciu. Problem 10-moze rozwizac:

  HP Quick Launch buttons tutaj

  Jezeli problem dalej pozostanie to prosze o Identyfikator Sprzętu tej Dr. rowniez.

  Pozdrawiam.

• Satellite L505 - installation of Windows 7 can't find driver for the DVD

  Hello

  I bought a Satellite L505 with Windows 7 home 64 bit. Now, I want to install Windows 7 Professional 64 bit. However when the installation starts he reports that it cannot find a driver for the DVD.

  Who can help

  Concerning

  P. Engels

  Hey,.

  If you do a search on Google you will find a lot of results on this error message and in general it s associated with the middle of the installation (DVD itself).

  Do you use an original disc of Microsoft Windows 7, or is it a copy to a friend?

  You should only use the Microsoft original disks with valid software.

• Installation of Windows XP tells me that I need the file "igxpmp32.sys.

  I install windows xp on a laptop given to new, I bought because I just couldn't connect on it.

  During the installation it stops and tells me I need the file 'igxpmp32.sys' I seek but can't find. Help, please

  original title: how to find "igxpmp32.sys.

  Hello, Tona,

  Igxpmp32.sys file is located in the folder C:\Windows\System32\drivers.  This is the accelerated Intel graphics drivers.  Try Intel.com.

  http://www.Intel.com/content/www/us/en/search.html?keyword=+igxpmp32.sys

  You can also find the rom installation.

• New installation of Windows, cannot be updated, use the troubleshooters, install some drivers, etc.

  I just got my new pc in the mail, put everything together, things are going wonderfully.

  However, my old motherboard installed my hard drive as IDE, while my new motherboard used alone RAID or AHCI (im using the same hard drive for my new pc) and so I just reinstall windows using my installation disc. And when I loaded in windows, I installed my card drivers mother perfectly fine CD. However, I can't use windows update, even after the validation of windows. All convenience stores read "a problem is preventing the troubleshooting tool to start" (0x8E50247 error code) actually ive been awarded the xxxxxx247 codes error then Yes. Help, please. I want my PC to normal

  PS I have all my old files always in my windows.old folder. Can I just set that up somehow? If my computer is back to how it was before the passage of material?

  Hello

  To troubleshoot Windows Update in Windows 7, we suggest that you follow these methods below and see if it helps.

  Method 1: Reset the Internet Explorer settings.

  You can reset the Internet Explorer settings to return to the State they were when Internet Explorer has been installed on your PC. This can be useful to solve the problems that could be caused by some settings changed after installation.

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Also re - activate the Add-ons.

  Please click on this link to know how to reset Internet Explorer settings.

  Method 2: Perform the clean boot

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when your run a program in Windows.

  Click this link to learn how to perform the clean boot in Windows 7.

  Note: Please see: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Method 3: Run System File Checker scans to check corruption of system files.

  1. Press the Start button, then type cmd.
  2. Right click on cmd and select run as administrator.
  3. If user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click continue.
  4. Copy and paste the following command in your command-line prompt: sfc/scannow
  5. Press enter to execute the command. It may take a few minutes to complete. If you find 100% full reorganisation, click X to close the command prompt.

  Let us know the result.

• No 1110ea audio envy 15 after installation of windows 8 64 pro

  No sound on my 1110ea envy 15 after installation of windows 8 64 pro.

  Maybe the audio drivers hp are repaced by victory 8 drivers?

  ass pls

  Hello

  Try the driver from the following link and see if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & DLC = in & softwareitem = ob-113849-1

• Speaker PC under 'Tab speakers properties-levels' option are gone after the new installation of windows 7 Professional.

  2 days ago, I did a clean installation of Windows 7 Professional x 64 on my laptop Packard Bell EasyNote TX86. Since then my laptop makes a beep every time I plug / unplug the power supply.

  Before the fresh install, I was able to disable the cut-off function of the PC "Tab speakers properties-levels" speaker sound but now the PC speaker settings are no longer there (I tried disabling it in the BIOS but no option is also available). What can I do to turn off the beeps?

  I found the problem.

  Audio drivers that installs with windows 7 was incorrect. I downloaded the audio drivers from Packard Bell site, after their installation parameters PC speaker were back and I was able to disable the PC speaker.

• A hard time, installation of windows xp

  3i, ESXi 3.5 (build 123629).

  I don't get «the installation program found no hard disk units installed on your computer...» »

  TNT

  The XP cd does not have the SCSI drivers to recognize the Buslogic or LSI SCSC automatons used in its ESX virtual machines. If you have created your VM with a type of buslogic SCSI adapter, you will need to download an image of a diskette of drivers from the link below.

  http://www.VMware.com/download/server/drivers_tools.html

  Then

  (1) (copy the file FLP to your ESX Server (you can put it on the VMFS data store).)

  (2) change your VM and change the diskette to use an image file. Then navigate to the file FLP. Make sure that the connected to the power supply is turned on.

  (3) turn on your virtual machine. During the installation of Windows at the right time, press F6 to add drivers for storage and then load the driver for the drive of the virtual machine.

  If you use the controller logic LSI - see this link - http://virtrix.blogspot.com/2007/09/vmware-installing-windows-xp-on-esx.html

• Pavilion G6 2320er (d2y76ea): I need all the drivers on Pavilion G6 2320er for windows 10 x 64.

  I perform a clean installation of windows 10 x 64! I need all drivers, were I can find this: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-Notebook-PC-series/5330578/model/5347... drivers for Windows 10 x 64? Help my please find all the drivers.
  
  Serial number: (deleted content) & D2Y76EA #ACB

  I have a kit recovery disk and I can roll back, but I want windows 10. I try to search for the latest drivers from the http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/search/ site and install it, works very well. Problem solved.

• Compaq 610: What version of Windows?

  Hello

  My laptop model is Compaq 610, and I installed Windows 7 Home Premium 32 - bit, but the processor is 64-bit architecture.
  I wonder if 64 bit is best choice?

  Plug from my laptop.
  Intel Core 2 Duo T5870.

  3 GB of Ram.

  320 GB hard drive.

  IM, play Casual/large public games as Minecraft, Age of Empires, watching videos, browsing the Web (browser with Opera), navigation in fact with lots of windows open on the browser and windows.

  Thank you

  Constantine.

  Hello:

  If your laptop is running 4 GB or less, a 32 bit OS would be preferable because it uses less disk space and memory to run a 64 bit OS.  Not half as much, but less.

  IMO, you need at least 4 GB of memory to run a 64 bit OS and for acceptable performance.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• ACPI\HPQ0006 driver for Windows 7 Professional 32 bit - HP Compaq 610 support

  Hello! I have a problem with my HP Compaq 610, I have a problem with ACPI\HPQ0006, it appears in my unknown devices, any idea of what can it be? What is the driver of buttons Quick lunch?

  ING. José Manuel Vargas

  Hello

  The download link for the quick launch buttons is on the link below - download the installer and save it on your desktop.

  QLB Installer

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Kind regards

  DP - K