Installation of Windows 8 Pro

Similar Questions

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• Desktop browsers does not not after the installation of Windows 8 Pro

  Since the installation of Windows 8 Pro, I can't use any browser in the office, nothing to do. All problems seem to get fixed by going to the browser on the desktop, but IE, Chrome and Firefox do not work on my desktop. Also just found out that I can't connect to the ITunes Store, either. Please help me with this. Thank you.

  Hello

  If it works well before?

  Try to set Internet Explorer as your web browser as default, it worked for me.

  See the steps provided by Jessen: http://answers.microsoft.com/en-us/ie/forum/ie10_cp-windows_cp/how-do-i-make-ie-10-defualt-web-browser/4f5a15f3-7eb5-4212-a6db-089f2426df17

  All the best...

• Old dualboot options still available after the installation of Windows 8 Pro on a desktop Pc which had XP and Windows 8 prewiev version on that front.

  Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation.  Anyone who knows how to get rid of the last two options?  The good thing is now that I don't have to put a password everytime I turn on the computer.

  Press the Windows key + X and then click System

  

  Click on advanced system settings

  Click the Advanced tab

  Under Startup and recovery, click settings

  

  Select Windows 8 and uncheck the box "time to display list of operating systems.

• Not found CD/DVD unit after installation of Windows 8 PRO

  I can't play a dvd after you have installed Windows 8 PRO. The wrong researcher: material cannot start because the config damaged or incomplete information in the registry (code 19).

  When you are looking for a new driver, told me that I have the last. I read on the Microsoft technical support who has a similar problem occurred on the Vista installation, but the solution should not be applied on this installation.

  What else is to deal with this problem?

  Hello

  Did you Win8 upgrade or clean install?

  Check it please http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message and instructions.

• Bus driver SM with yellow mark after installation of Windows XP Pro

  Finally, I have windows xp pro loaded. But in Manager device theres a yellow mark sm bus driver. Searching the forum I seem to have fould to her in the video driver ATI pack. But when the driver is loaded it messes up windows so it does not start.

  Can anyone help?

  Paul

  Hello

  I am reading other threads and it seems that you have a laptop Satellite Pro A60.
  What can I say you installed the OS manually and in my opinion a simple driver is missing
  Have you tried to install the infrared driver of the European driver Toshiba page?
  It may be a key

  In any case, before you start the manual installation of the OS, you must read the Installation Instructions. You will find all drivers that must be installed and the proper installation order.

  Please check this document and follow the guidelines

• No sound, no new installation of Windows XP Pro SP3

  We had to install Windows XP Pro on a laptop but the sound does not work.  Device Manager displays the details as an "Audio on High Defeinition Bus device" Audio and show details such as HDAUDIO\FUNC_01 & VEN_1106 & DEV_1708 & SUBSYS_15580663 & REV_1007\5 & 2F010DBF & 0 & 0001

  There is a yellow question mark against this material on other devices, Device Manager. The properties indicates it is present, but no drivers were installed with Code 28. Using the results of option to reinstall the drivers in thwe Wizard saying that it cannot install this hardware because the required software is not found by the wizrad!

  I tried some drivers, such as those from Realtek, but with no result.

  Any suggestion please?

  (Note that it worked on Vista professional but which had to be replaced due to graphics card conflicts, solved with XP Pro).

  No version of Windows already had a set of drivers included. There is too much material 'out there' for Microsoft to consider being completely comprehensive installation. In any case what are Microsoft doing about / hardware technology which is backdated by the version of Windows that uses any given individual?

  Out of curiosity, what is the manufacturer of your PC? I've never heard of which did not provide for drivers.

  If they do not respond to emails, http://www.pcidatabase.com/ can be useful. Your ID Fri and dev are respectively of 1106 to 1708. Use the drivers found in this way at your own risk. Set a restore point before installation. Don't let you be guided to use any driver 'detective '. If you use Windows Update.

  As I pointed out, you may be missing other drivers too such as (but not limited to) chipset and LAN.

  Tricky

• during the installation of windows xp pro, I get a message that says can'nt read the disc

  When the windows xp pro installation I get a message that says can'nt read the disk and ask a complete worm that I have a full verion

  Hello

  Using disk management to reassign the partition and try to install the operating system.

  Rgds,
  J Chambers

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• browsers stopped working after the installation of windows 8 pro

  I installed the windows 8 pro yesterday and everythign seems to work with the system and applications well, my internet connection is good. For some reason all my browsers like internet explore and google chrome do not work. the integrated internet explore on the start menu of windows 8 is at work, what CA I do to solve this problem?

  I have an Hp Office p2-1123w

  I found a solution myself, everything you have to do is to update your installation of windows 8, just go to settings and click on update your computer, without modifying your files and follow the instructions on the screen.

• Installation of Windows 7 Pro on Windows Vista

  Hello

  -J' backed up all my data on an external drive.

  -A conducted an audit of compatibality and I'm ok to install 7

  -Ran Microsoft Malware Scan

  -Updated, ran and disabled virus protection

  -Checked to see if my computer was 32 or 64-bit (32)

  -Ran the Windows 7 Pro Installation disk

  * Chose to connect to the internet during installation for updates to update more

  * A selected custom installation (I like all of the deleted computer)

  He asks me, "Where do you want to install Windows?" and gives me three options.

  Disk 0 Partition 1 / 70.0 MB / 62.0 MB free / OEM revised

  Disk 0 Partition 2 (d) / 19.5/19.4 Go free / primary

  0 3 disk partition (c) / 576 GB / Gree 396.7 / system

  Which to choose and why there are three partitions?

  The first two partitions were likely put there by the OEM computer for purposes of recovery for VISTA.

  If you no longer want a return to VISTA, you can delete all partitions during the installation of Windows 7.

  See below.

  Install Windows 7

  Steps 7 and 8

  Otherwise, install on Partition 3, the C:

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Help the clean installation of Windows 7 Pro and using the GPO to run automatic updates and restart all night

  I am trying to solve a problem that will probably require a new installation of Windows 7 Professional 64-bit. The grace period ends in 3 days, and the next 30 days are final exams at the College. I have 2 licenses (and product key) of Windows 7 Pro, but my drive HARD goes wrong and I don't want to use MAK activation. I will be eventually to replace the disk, but is now bad timing.

  If a reinstall is needed, I was going to ask if anyone knows how to set the strategy of perhaps a GPO where Windows is updated automatically in the background and after installing updates, 45 or 60 minutes, then restart. The goal would be to have a computer fully patched when I wake up in the morning.

  This is my plan:

  Install Windows 7 Pro SP1 64 bit > Windows automatically updated and plug the Ethernet cable > define a GPO where the computer waiting for 45 to 60 minutes after installation of updates (so the msi may end in the background, and I do not interrupt the installation) > the PC will restart > more update swill be downloaded and installed > wait due to the policy of GPO before reboot > Reboot > do it until it's over. > wake up with a PC fully patched 7-9 hours later.

  Is this a workable plan?, and if so, how do I define policies such as delay restarting, etc. to achieve?

  The reset did not work. It would be a simple solution. I have a valid license, but I don't want to replace the HARD drive until after final exams are over, so I'll reinstall and activate. I try to achieve in the next 24 hours, so it doesn't keep me from my school work.  I must also support and will then replace my files.

  Feel free to advanced used terminology. I have some experience.

  Any help is greatly appreciated!

  Another question: should I install a security suite before all updates being installed more than 12 hours, or wait until later? What is the level of risk?

  Anyone used Ninite to automate the installation of other programs? Is how safe it?

  Thank you!

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• installation of windows 7 pro 64-bit will not complete installation. clean install.

  I tried to install windows 7 pro 64-bit and I got all the way to the last part of the installation and the screen goes black for 5 minutes approximately and restarts. then he tries to run windows and the screen becomes black and black rest for at least 30 mins +... is when I gave up on it. What can be wrong? I have overcome all the req and even tried 2 games of motherboard and processor and came to the same problem. I think it's a bad dvd but the store won't Exchange it. They let me just go back. then before I have to send back tomorrow I figured I would give it a try more.

  at this moment I have amd athlon 64 3800 + and 4 GB of ram and I also tried a quad core from amd phenom 2 and 6 GB of ram with the same result.

  Joe can you be more specific, what stage the installation goes on black screen...?

  I had a same problem once and there is a possible resolution to do so,
  If it is in the final phase of installation is mainly due to the video card..,.
  Then restart the computer and keep tapping F8, select "enable Mode low resolution" because the option and now the installation program will continue...
  see if it progresses and ends with the installation by inviting you to enter the user name and password then your product key.
  Once you have finished with these steps and that reach you your office update your video card driver and restart the computer.
  Hope it will work for you :D
  Please let us know if it works :)

• Reference Dell blutooth 370 stopped software installation on Windows 8 Pro,

  Original blutooth title: Dell 370 works is not in Windows 8 Pro of the latest broadcom driver stops windows start with the crucial problem.

  370 Bluetooth software Dell shows the compatibility problem during installation and no option to install in compatibility mode, a few days ago I downloaded the latest version of the software from the site of Broadcom bluetooth and it started to install and halfway through installing any system stopped working even as Start menu then I turned off via the power button / stop and started but then shown OS startup error some critical drivers are missing I tried to fix the system but nothing worked and I also tried to restore the backup drivers via cmd, but nothing has worked.

  Now, I'm not able to use my bluetooth devices.

  Please respond if you have any solution.

  I had the EXACT same problem. I have dell studio 1435 with Broadcom 370 Bluetooth device. As mentioned by you, my device manager was showing also not everything about Bluetooth. Please, download the following application. It works like charm. I installed it on windows 8 Pro 64-Bit. Before I had vista 32 bit.

  http://FTP1.Dell.com/folder00865420m/1/

  Let me know if it works.

  Ketan