Installation of XP using F6 to install driver SATA controllers. which adapter?

Similar Questions

• Satellite A300 - 10 M: how install driver WLAN

  I downloaded the Atheros WLAN driver but do not know what are the files to be opened to load the driver on the laptop.

  Any help, please?

  Thank you

  Hello

  I guess you ini files and the dll in the folder of the Wlan driver
  In your case, I would go to the Device Manager. Here, you must mark the card Wlan (unknown device or Ethernet card in the network controllers) and must use the option install driver. Use the advanced procedure, and then point to the folder of the Wlan driver that you downloaded on the page.

  Welcome them

• I used Bootcamp to install Windows 10 and now it asks me for a boot drive?

  I used Bootcamp to install Windows 10, then it turned off and when he started upward, he asks for a boot drive?  I'm going back and this computer is not even a day old?

  Dr. Alan

  Welcome to Apple Support communities

  Try holding the ALT key during start up your Mac to the top. This will make all bootable discs appear on the screen, so tell me what options you see here. Maybe the Windows installation is damaged or you have removed OS X by mistake.

• I am trying to install Windows 7 on my hard drive, but the installer tells me that I need the driver "Promise Technology Inc. Ultra IDE Controller".

  I'm trying to install Windows 7 on a (40.1 GB) partition on my hard drive, but the installer tells me that I need the driver (Promise Technology Inc. Ultra IDE Controller.  I searched the Internet and tried several, but no results.  Can someone point me in the right direction.  I have a box to open with Technical Support, but not a lot of help out there.

  Thanks in advance

  Joe Franklin

  original title: installation of Windows 7

  Hey Joe,

  I suggest that you visit the gigabyte website for your region (and/or the site global http://www.gigabyte.com/?f=g ) and check your motherboard for compatibility with Windows 7.

  The problem you are experiencing would imply that Windows 7 has no native driver support for your disk controller, so if Gigabyte don't have drivers that you are locked unless you buy a discreet disk controller that is compatible Windows 7.

  Please mark this as useful or response if applicable.

  On the other hand, you have this posted in a forum of Windows XP when it is really a problem of Windows 7.

  Tricky

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• New installation of Windows, cannot be updated, use the troubleshooters, install some drivers, etc.

  I just got my new pc in the mail, put everything together, things are going wonderfully.

  However, my old motherboard installed my hard drive as IDE, while my new motherboard used alone RAID or AHCI (im using the same hard drive for my new pc) and so I just reinstall windows using my installation disc. And when I loaded in windows, I installed my card drivers mother perfectly fine CD. However, I can't use windows update, even after the validation of windows. All convenience stores read "a problem is preventing the troubleshooting tool to start" (0x8E50247 error code) actually ive been awarded the xxxxxx247 codes error then Yes. Help, please. I want my PC to normal

  PS I have all my old files always in my windows.old folder. Can I just set that up somehow? If my computer is back to how it was before the passage of material?

  Hello

  To troubleshoot Windows Update in Windows 7, we suggest that you follow these methods below and see if it helps.

  Method 1: Reset the Internet Explorer settings.

  You can reset the Internet Explorer settings to return to the State they were when Internet Explorer has been installed on your PC. This can be useful to solve the problems that could be caused by some settings changed after installation.

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Also re - activate the Add-ons.

  Please click on this link to know how to reset Internet Explorer settings.

  Method 2: Perform the clean boot

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when your run a program in Windows.

  Click this link to learn how to perform the clean boot in Windows 7.

  Note: Please see: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Method 3: Run System File Checker scans to check corruption of system files.

  1. Press the Start button, then type cmd.
  2. Right click on cmd and select run as administrator.
  3. If user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click continue.
  4. Copy and paste the following command in your command-line prompt: sfc/scannow
  5. Press enter to execute the command. It may take a few minutes to complete. If you find 100% full reorganisation, click X to close the command prompt.

  Let us know the result.

• How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  XP drivers for XP, NOT of Windows 7...

  Go to control panel > devices and printers > click on "add a printer".

  The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

  A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

  Click on 'NEXT' and follow the installation instructions...

• Installation clean P580 Win 7 Ultimate 64 bit - cannot install driver Intel WiFi correctly

  Driver installation went well after a clean install. I was not aware of any special settings or any need to install some drivers in the order. So maybe I did not just something.

  I noticed that there was no WiFi service. I have downloaded and run the file 0zwl03ww.exe, which is listed as driver WiFi Intel for Win 7 32/64. I got a message saying that something could have trouble with the installation. So I chose rerun. Asked me if I wanted to replace an existing file. I said "Yes to all". The result was a message saying "access denied." Later, there was still no WiFi and no WiFi service pilot shown in Device Manager.

  I restarted the PC, hoping it would help. Still no WiFi and no shown in Device Manager.

  I looked at the folder C:\Drivers containing the driver files and subdirectories. I removed those and tried to delete the folder. I didn't have the right to do. I checked the security settings on the folder and showed a red X with a message saying that the security settings are not available.

  When I try to reinstall the driver, I get the same results reported (files to be replaced), but no files are displayed in Windows Explorer in this folder.

  I tried to restore the original file to the Recycle Bin. Restoration happened, but now the files are gone.

  There is another pilot provided for Liteon & CyberTan; This doesn't seem to be the right driver.

  If the PC is running, LAN, internet cable OK - but I'm stuck with no WiFi. Can anyone help? Thank you!

  I found and ran a setup.exe for Win7 inside the extracted folder. I went through the typical installation of choice routine and told me "The Intel ProSet Wireless WLAN software Setup Wizard ended prematurely" with no further explanation given.

• I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

  Device drivers for a Win 7 install on Ubuntu system

  Hello

  I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

  Thank you!

  The bios on fail safe defaults options are?

  It will probably take the raid driver

• Can I install Parallels after installation of Windows using Boot Camp?

  Windows on Mac

  Can I install Parallels after installation of Windows using Boot Camp?

  You can install Parallels, but you will not be able to transfer your license existing if its already active in Boot Camp. You first need to remove the Boot Camp, then you can transfer it to Parallels. You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, graphics driver re-installed

  no longer works because

  His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, reinstalled video card driver

  I start the program and then it will begin to Flash white and black.

  On my machine of Tablet and desktop

  I use win10 on both

  need illustrator very soon

  It works again!

  I realized that I had installed a security plugin in order to access my bank account. It was the Warsaw by the GAS technology. I removed it and Illustrator came back to life! No more black and white flashing and slow down.

  I hope this helps! (:

• Can I install a stand-alone version of Lightroom on my IMac and my MacBook Pro and then use an external hard drive to store all my photos?

  Can I install a stand-alone version of Lightroom on my IMac and my MacBook Pro and then use an external hard drive to store all my photos?

  Yes.  To keep both computers synced, keep a copy of your catalogue on the EHD also.

• Portege R500: XP Installation with CD/DVD external USB - SOLUTION drive

  Hi all!

  I just wanted to take five minutes to inform you that installing XP on a Portégé R500 with external USB CD/DVD drive is possible, even if you have already deleted Vista and with a CD bootable XP Win in hand.

  First go into your BIOS and check / set first boot device is CD/DVD player

  Start your installation of win XP from the CD without the F6 thing and let go his way

  After some time, the installation stops and says "cannot find the file xxxx" and you are invited to tell where is this file

  "" Just replace the drive letter "C:" which is given by default with the letter of your CD/DVD drive (and leave the rest as it is) and the installation will continue until the next "cannot find...". "and you need to again replace the drive letter, etc...

  After a complete installation 'automatic assisted manual', you are welcome in Win XP!

  The next question is "where can I find my CD/DVD drive letter?" and the answer is "it's the next letter after your last HARD drive letter" (I consider you have only your Portege with nothing else plugged that your CD/DVD) so more often it will be 'E' C: being the first partition of your HARD disc : is the hidden / recovery partition that winning creates.

  But don't worry, if you type try to the wrong letter, that you will have as much as you want until you find the good and the following "cannot find...". "it will remain the same.

  I hope that this information will help some of you who want a fresh installation of win XP from a newly formatted HARD disk.

  With sincere friendships.

  Mage.

  What a great information!
  Thanks a lot for posting this.

  I think it might be useful to others here.

  Good bye

• Best option to use the mSATA SSD Drive - HP Envy 15 Sleekbook: Cache or primary storage?

  Product: HP Envy 15 t Sleekbook (15 t-j100)

  Technical specification:

  • Intel Core i7-4700MQ @ 2.40 GHz
  • Intel HM87 chipset
  • 12.0 GB RAM DD3 (two openings 8 GB + 4 GB)
  • NVIDIA GeForce GT740M (2 GB) + Intel HD 4600 graphics card
  • 1 TB 5400 RPM SATA HDD
  • Windows 8.1 Pro x 64

  Hi all

  I intend to buy an SSD mSATA disc to my desire, because I want to improve the response time at the opening of some programs, improve the General performance of the operating system and to access files faster to big (read and write).

  I searched several readers mSATA SSD in the Web and I chose a P830 Series128GB mSATA SSD Samsung miniPCI-E disk (SATA III 6 GB/s, read 500 MB/s, writing of 400 MB/s).

  But I'm asking about what might be the best option to use the SSD mSATA so suitable as a primary drive (operating system installation and leaving 1 TB of HARD drive for storage and applications) or use it as a cache to improve overall performance.

  I do not envy for IE play or video editing, but I work with VMWare Workstation, and most of the time I need to use about 2 or 3 VM at the same time (sometimes during the recovery of a virtual Suspension of machine it take a long time, the virtual disks sizes about 40 GB). Another use for my desire is to play movies/series HD / 3D 0 and mirrored them for my Smart TV (via Miracast)

  I read something on Intel Smart Response Technology (SRT) and I heard some benefits for use with SSDS as cache memory but I am still confused the best option.

  Any suggestions you may have? It might be useful for me!

  Kind regards

  Alejandro

  Hello @cchoiz ,

  Welcome to the HP Forums!

  I understand that you have questions about the installation of your mSATA SSD.

  The mSATA slot is designed to only be used as a disk cache. You may experience problems starting in the mSATA SSD as drive. For this reason, I recommend to use it in its configuration provided; as a cache drive.

  The decision is entirely at you in the end. If you are able to configure the BIOS to use the mSATA as the main drive, this will help improve your system performance in addition to using it as a cache drive, especially if there is enough space to install your VMWare on the mSATA SSD after you have installed the operating system. Use it as a main drive will also increase the life expectancy of the SSD.

  I can only offer you my personal and no suggestions 'official response HP' in this regard. As previously mentioned, it is entirely up to you.

  Hopfully, this helps at least a little.

• The use of directshow installed visionless.

  Hello

  I use the full version of Labview 8.5.1. I do not have the vision assistant installed and I have no intention of buying it because it is for a small time tasks.

  Is there a dll General directshow that I can use it without having to install the requiring ni_imaq_usb_installer_86.exe OR vision?

  Is there a way to find what are the inputs and outputs of this dll without papers? (what I got during the installation of the SDK software acquisition card are the attached DLLs (the attached TXT file should actually be DLL)).

  What I really need, is to acquire a snapshot of a USB capture card.

  Thank you

  Amose

  Hello

  Yes, a license for the Acquisition of Vision software will allow you to acquire Cameras USB compatible DirectShow through the IMAQdx driver. Note that this is not the IMAQ USB driver that requires the Vision Development Module. As noted in the paper I linked, the IMAQdx driver is a driver with support which allows you to purchase a USB camera without needing something extra.

  -Zach