Installation on EA6900/AC1900 tips
Just got this new router and remember when I had my old Linksys router that it was preferable to manually set upward rather than using the disc that came with it. Then, there are the tips I should know before starting the installation on this one?
Thank you
What is the Lim and the ISP modem model? No matter what NAT here?
Which Service provider Internet do you have? Cable or DSL?
Check the cable between the Modem and the router, switch to be sure. Link >http://en.wikipedia.org/wiki/CAT6 is recommended.
Check requirements ISP MTU, cable is usually 1500, DSL is about 1492 to 1472. The ISP and ask.
http://www.Linksys.com/us/support-article?articleNum=134914
http://KB.Linksys.com/Linksys/UKP.aspx?VW=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
Wireless security: "WPA2 Personal" (not mixed)
Wireless protocol: 'mixed '.
Channel width: 'Auto' set for personal WPA2 WiFi only.
Disable the WPS.
Configuration DHCP reserved IP addresses for all devices ON the router. This ensures that each devices gets its own IP address when turned on and connected, eliminates conflicts of IP addresses and helps troubleshoot and maintain some consistency for applications that need to connect and mapped drives.
Make sure that the devices are configured automatically obtain an IP address.
Disable http://en.wikipedia.org/wiki/Ipv6 on the router, select Local connection only and disable it on any client PC and devices.
Router placement
User Forum - "well I feel really stupid. After you move the router away from other devices electronic my speeds are back to normal. Just a heads up everyone affected by slow speeds, you might want to keep him away from other electronic devices and see if that helps. »
3-6' feet minimum safety distance between the devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements and closets as building materials, or by electronic devices could interfere or impede the spread of the signal is good.
http://KB.Linksys.com/Linksys/UKP.aspx?VW=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.XML&PID=80&r...
http://www.SmallNetBuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-FAQ-the-esse...
http://KB.Linksys.com/Linksys/GetArticle.aspx?docid=acca9b9008f04a66af818c2ab366001e_Positioning_the...
Tags: Linksys Routers
Similar Questions
-
Pls help me with this installation problem. Your tips are very necessary.
I want to install oracle 11.1.6.0 on windows professional xp everything was fine until there is a pop up that remains below
INFO: output-tool: launching browser
NEWS: economy out only tools...
INFO: no tool only seconded in this session
INFO: output only tools are created in a single installation
INFO: No. sets of tools to be run: 1
INFO: page ca look: true
INFO: tools to run exitonly spent: 1
INFO: Begin to run the configuration wizards
INFO: Command = C:\WINDOWS\system32\cmd/c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype /inscomp typical customer, oraclenet, Java virtual machine, server, ano /insprtcl tcp, nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
Command = C:\WINDOWS\system32\cmd/c call c:\app\doN H\home/bin/netca.bat has no
Runtime error: 'c:\app\doN' is not recognized as an internal or external, order
operable program or batch file.
INFO: Configuration assistant 'Oracle Net Configuration Assistant' failed
-----------------------------------------------------------------------------
From OUICA *.
The Oracle Home c:\app\doN H\home value
Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml under the directory files will be processed
INFO: "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that have failed, has been omitted or has been cancelled. This file can be used to run these wizards of configuration outside of YES. Note that you may need to update this script with passwords (as applicable) before running the same thing.
-----------------------------------------------------------------------------
INFO:
The developed /runconfig command is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME = C:\app\doN H\home MODE = action = configure RERUN = false, $*.
INFO: as a call internal Plugin or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the /runconfig command instead of the order of the plugin
INFO: Creates a new file C:\app\doN H\home\cfgtoollogs\configToolFailedCommands
INFO: The option is to replace the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands, file it backs up
INFO: The backup file is called C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak
GRAVE: YES-25031: some of the configuration wizards failed or cancelled. It is strongly recommended that you repeat configuration at this time assistants. Not run successfully the Wizards '' recommended '' means that your system is not properly configured.
1 check the details on the screen Configuration Wizard panel to see errors resulting in chess.
2 fix the errors causing these failures.
3. Select the wizards failed and click 'Retry' to retry them.
INFO: User selected: Yes/OK
INFO: Begin to run the configuration wizards
INFO: Command = C:\WINDOWS\system32\cmd/c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype /inscomp typical customer, oraclenet, Java virtual machine, server, ano /insprtcl tcp, nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
Command = C:\WINDOWS\system32\cmd/c call c:\app\doN H\home/bin/netca.bat has no
Runtime error: 'c:\app\doN' is not recognized as an internal or external, order
operable program or batch file.
INFO: Configuration assistant 'Oracle Net Configuration Assistant' failed
-----------------------------------------------------------------------------
From OUICA *.
The Oracle Home c:\app\doN H\home value
Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml under the directory files will be processed
INFO: "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that have failed, has been omitted or has been cancelled. This file can be used to run these wizards of configuration outside of YES. Note that you may need to update this script with passwords (as applicable) before running the same thing.
-----------------------------------------------------------------------------
INFO:
The developed /runconfig command is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME = C:\app\doN H\home MODE = action = configure RERUN = false, $*.
INFO: as a call internal Plugin or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the /runconfig command instead of the order of the plugin
INFO: The option is to replace the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands, file it backs up
INFO: The backup file is called C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak.1
GRAVE: YES-25031: some of the configuration wizards failed or cancelled. It is strongly recommended that you repeat configuration at this time assistants. Not run successfully the Wizards '' recommended '' means that your system is not properly configured.
1 check the details on the screen Configuration Wizard panel to see errors resulting in chess.
2 fix the errors causing these failures.
3. Select the wizards failed and click 'Retry' to retry them.
INFO: User selected: No.
1... the Netmgr and the ODCA has not been configured properly and that they do not open on windows environment.
2... the sqlplus, whenever that called upward, aooears and disappears in 1 second
3 I can't not connecting them to the database. Says: the adapter error
4... will be 1 start the listner before I can connect and how?
your contribution is very necessary. TNXPL examine and understand the Installation Guide with care - especially "Install Location" in table 3-1
http://download.Oracle.com/docs/CD/B28359_01/install.111/b32006/install.htm#CIHFJICE
HTH
Srini -
disk repair &; permissions
OS 10.6.8
In the race checks the disc, I got a message that my drive needs to be repaired. I have my disc to install Mac. I'm not sure how to start my computer with the installation disc. More tips for the repair disk and repair of permissions will be appreciated.
Insert the DVD in Snow Leopard and then stop the machine.
Restart it by holding down the c key to boot from the DVD.
Use a disk utility application to repair the internal drive.
-
Error code 80070652 and 646 continues upward trying to update my Windows 7 system.
I get the error message 80070652 and 646 when you try to update my system which was only on Windows 7 because it is new. I can try correcting the problem.
It is for the following system updates.
KB967044 update of security for Microsoft Works 9
KB957324 Manager contacts for Outlook 2007 Service Pack 2
KB951550 update of security for Microsoft Office 2007
KB949426 Microsoft Office Accounting 2008 U.S. Service Pack 1
KB951944 Security Update for 2007 Microsoft Office System
The 2007 Microsoft Office suite SP2 Service Pack 2
KB967642 - update for the 2007 Microsoft Office system
Tip: Insert your Office 2007 CD-ROM into the Bay before the next appropriate installation attempts.
Tip: If no joy, see if you can download the "fullfile" version updates via http://www.microsoft.com/downloads/ or http://catalog.update.microsoft.com/ and then manually install / them.
Otherwise, visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
UPS for ESXi installation tips House + NAS installation
wanting advice on UPS system for home installation of VMware. our neighborhood is to have summer blackouts for hours these days.
I have an an ESXi 5.1u2 Server ESXi on a usb key with a SSD for the cache.
of the virtual machine is on a NAS
2 switches x netgear
want the ups to shut down the VM with elegance on the NAS, then stop the ESXi server gracefully.
I can plug a UPS into the NAS via USB and have the SIN 'shutdown' but I know not if that normally stops the virtual machine first then ESXi server?
I have not idea what to use for the ESXi server. It can be as simple as connect a USB to a UPS in the ESXi server and configure something in vSphere but I "just guessing
something like WinNUT should I do?
some tips are appeciated
Hello
Please consult this document:http://www.virtualtothecore.com/wp-content/uploads/2012/07/wp_en_vSphere_shutdown_PCNS.pdf
And also, check out this blog: How to configure ESXi to stop using an APC SmartUPS (with lamw scripts)
-
Everytime I try to download the Adobe installer that's fine 95% full, and then it will say "launch creative Cloud" and then it will freeze. I tried to restart the download as Adobe said, and he did the same thing. Any tips to help me?
Uninstall anything cc which can be installed.
clean a http://www.adobe.com/support/contact/cscleanertool.html
then install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe
-
Installation, Thinkpad 520, Ubuntu 11.10 tips
I have a Thinkpad with Intel + NVidia graphics.
Can anyone offer advice on what to do during the initial installation? Should I disable or activate the NVidea/Intel/Optimus graphics? I believe that there is an option in the BIOS.
I read on the project of Ironhide (former bourdon). Is it worth a try?
Unless you want to venture out on the way to Bumblebee, your best bet may be simply set the display on discrete graphics device in BIOS-> Config-> display configuration. Ubuntu 11.10 should install and run reasonably OK using a 32-bit kernel (see a recent thread on the W520 and 64-bit kernels). If you don't mind installing the NVIDIA drivers, you can try the. You will probably get a little better performance out of them, but you need to address to re - install these drivers, whenever the kernel is updated. This Debian wiki page and some of its links children have a good discussion on this topic would be a good place to read: http://wiki.debian.org/NvidiaGraphicsDrivers you may encounter this problem: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/699802 if you have a separate/boot partition, but it should be easily bypassed for now. John
-
So I'm going to replace my hard drive on my z61t does not start in any mode. I have (I think) if I need to backup data. I want to buy a new HDD and install win 7 on it. Currently I have vista. I think it would be nice to create a few (three?) partitions so I could make as a new computer. Any ideas on the best way? A friend has a new HP laptop that has a built option to reformat automatically to the original settings. Can I do something like that? My current computer has rescue and recovery, but it will not get before the start screen: /. Thanks for the tips!
If you want the laptop to get back to the original shipping status on your new hard drive, you must the Lenovo recovery media.
-
I have a PC with windows 10. My SSD is 112 GB. It was used for my OS and windows 10 drivers. Then I have a 1 TB HARD drive, which is used for programs and the storage. Is it possible to install everything on the HARD drive? I don't want to fill the SSD because its purpose was mainly for windows. If I can't install it on disk or is not a good idea... Please could someone guide me through the BEST way to install the programs in the suite Creative cloud on my computer with how it is implemented?
You have no other choice than to install the main office application on your machine's main drive. In addition, you can install applications on another drive.
Change for Applications installation location
With the application of CC open, select the gear icon in the upper right, and then choose Preferences. In the preferences of the screen select creative cloud and then look for the drop-down list installation location
-
failure passwd.txt and installation tips
Hi all
I wonder if it will cause any problem later if I don't have permission to create a file under c:\ while installation OEID from the way get started guide (run_EID_install.bat)
I get several FileNotFoundException:c:\passwd.txt
Does really have on c:\ passwd.txt? What is this file? Is there any configuration file to change this property for rent?
And one more thing, while I run 'run_EID_install.bat', the server is restarted to accidendtly. I believe that weblogic server is installed successfully but do not know beyond ADF...
Can someone guide me to solve this situation, if there is no easy way? I guess I need to know what is not really installed correctly and maybe uninstall and reinstall...
Thank you
On your ADF failure: If the ADF installer that you downloaded has a name like V29856 - 01.zip, you must rename after you copy it to your installation directory. The new name must be:
ofm_appdev_generic_11.1.1.6.0_disk1_1of1.zip
The reason is that the script of the orchestration is searching for this name.
Then blow ORACLE_HOME and re-run the script.
Frank
-
laptop - hard drive &; RAM installation tips
Hello
I customize a new laptop for video editing and after reading the thread "'
I decided to replace the optical Bay and install a third hard drive. "My idea is to install the operating system and programs on the mSATA SSD. However, the available SSD isn't a great write speed. This 'slow' write speed compromise the performance of the system?
I have the possibility to replace the mSATA for a faster, however, with only 120GB (120 GB Kingston SSDNow mS200 mSATA (up to 550 MB/sR: 520 MB/sW))
Or would it be better to replace one of the HDD for a faster SSD?
Regarding the RAM is enough 16 GB? where do I go to 32 GB?
Thanks for the tips.
SYSTEM:
Processor
Intel® Core™ i7 Quad Core Mobile Processor i7-3840QM (2.80 GHz) 8 MB
RAM
16GB 1333 MHz MEMORY (2 x 8 GB) DDR3 SODIMM SAMSUNG
mSATA SSD
MSATA of Crucial M4 256 GB Solid State Drive (up to 500 MB/sR: 260MO/sW)
Hard drive
750 GB WD SCORPIO BLACK WD7500BPKT, SATA 3 Gb/s, 16 MB CACHE (7200 RPM)
2nd hard drive
750 GB WD SCORPIO BLACK WD7500BPKT, SATA 3 Gb/s, 16 MB CACHE (7200 RPM)
The kingston HyperX is very good, but the mS200 mSATA uses the SandForce controller, in contrast with the Plextor using the Marvell controller. In general the SSD with a controller SF is more prone to the 'stable state' performance degradation than SSD with Marvell controller. However, given that this is only for OS & programs, degradation of Scripture is not so important, it will be used mainly to read, not write. If the choice is between Kingston and keep your warranty or the Plextor and voiding your warranty, I would choose the Kingston, also because the write performance is not so important on your startup disk.
-
My first post here so Hello to everyone.
I've used photoshop since ps5. I currently use CS4 extended on a PC.
I recently downloaded and used the trial version of CS5 extended 30 days.
trial has ended.
I've now bought from adobe CS5 on disk (not extended) prefered version, I thought.
... is my question better to uninstall the trial first, before the installation of the drive.
uncertain of the extended trial version and my box no extended version.
If you use again the serial number is therefore to turn them off other program features in CS5 ex.
interest my current CS4 extended works well complete with Open GL activated even if the trial of CS5 would not work with open GL, is a usual problem.
Thanks in advance.
Martin
In fact, everything you need to do is you enter s/n with the trial version and you're good to go. There is no difference in the trial and the real version.
Whether it be extenced or no extended version is determined by the number if I understand correctly.
CS5 has a little more power than CS4 so may take slightly more resources. Are 64-bit versions?
If open GL does not work it is a video card driver problem that is something that can usually be corrected with an update.
Hope this helps
-
I am owner of Creative Suite Design Premium CS3 (and all earlier versions).
I downloaded DW CS4 Beta back during the Beta cycle, he took for a whirlwind and decided against the upgrade.
I have since received the Design Premium CS3 CS4 update as a gift (lucky me).
First and foremost, I run the CS4 clean script that went well.
I then installed the CS4 update that appears to be happening for hours but went well.
However whenever I launch DW CS4, the home screen tells me that CS4 beta is running (!) and pushes me to a (probably stand-alone) serial No. (more serial No. is not accepted).
All of the other apps will work perfectly.
I uninstalled CS4 twice, run the script cleaning CS4 twice and reinstalled CS4 but DW CS4 Beta will not disappear.
I am aware that this issue should be addressed to Customer Service, but I thought I'd first see if anyone conquered this problem on their own.
In fact, it is a known problem and is your own fault (no offense). When you have uninstalled the beta version, you don't turn it off. Since CS4 introduced "smart update and felxible clearance" policy, suite installs not rewire serial number and leave the old man in place. After that, even the retail versions will use soap operas to Beta, if that's what they are. If it has expired, they will ask for a new. Support call is in this case really the only option, I'm afraid.
Mylenium
-
iMac 27' Ram Installation tips
Hey,.
I want to increase the RAM in my iMac, but before you buy the RAM, I wanted a second opinion.
My iMac Specs:
- iMac 27 inches, end of 2013
- Processor: Intel Core i5 to 3.4 GHz
- Memory: 16 GB 1600 MHz DDR3
- Graphics card: NVIDIA GeForce GTX 780 M 4096 MB
From the foregoing, I thought doing one of the following RAM:
- @ Amazon 59.98 GBP: CML16GX3M2A1600C10 Corsair Vengeance Low Profile 16GB (2x8GB) DDR3 1600 Mhz CL10 XMP
- 65,86 GBP @ Amazon: Corsair CML16GX3M2A1600C9 Vengeance Low Profile 16GB (2x8GB) DDR3 1600 Mhz XMP 9 CL
My questions:
- Those RAM sticks are suitable for the iMac I have?
- What is the difference between CL9 and CL10
- All recommend something else?
Thank you
There are two vendors of RAM recommended on these forums: OWC (macsales.com) and Crucial both actually test with the Mac and have guarantees of life; Macs are very sticky on their RAM. I would not buy RAM anywhere else.
So, I could not offer an opinion on the RAM, you said except that I would not buy it. Here is the General page to OWC - all you need is your model identifier (not to worry no matter what else):
http://eShop.MacSales.com/shop/Apple/memory/iMac
If it is yours, then here is the RAM with the correct specifications:
-
Huawei sd usb storage
Applies to: Windows | Windows Vista | Hardware and driversA month before, I let a co-worker install a modem Wireless USB as Huawei to use my laptop somewhere without wifi service. Subsequently, I uninstalled the software drivers because I don't think I'll ever use this modem again.
Now, I noticed that there are several registry keys for different devices of e/s as:
Huawei_sd_storage_usb
and
Huawei_some other drive typeNone of these registry keys can be deleted, I get an error saying that "year error occurred during an attempt to delete the key. Same thing if I try to write data in the registry key. This behavior resembles a persistent virus and not a register legitimate supporting a legitimate PnP device.
I then rebooted in safe MODE, thinking which should pick up anything the malware is hung. No go, same thing, cannot remove the key and cannot modify the data in the key.
None of the malware scanners were able to detect this, including:
Paid last AVG
Windows Defender
Microsoft Security Essential
Spybot S & D latest
Malware Microsoft FixitI don't trust Huawei, and what look like these keys are to monitor my laptops I/O activities through any player or the USB port.
HP DV5t-1000 CTO
Pentium dual core 2.54
4 GB of DDR, Home Premium Vista 64I'm moving your question on the forum of Windows for material and the Drivers.These are the registry keys related to the legitimate drivers provided by the manufacturer of the device and are not related to malware.
Note, however, that you have an overload of running security software and some should be deleted. If you use Microsoft Security Essentials, you must disable Windows Defender in Vista and AVG should be removed, preferably using the AVG removal tool. I have no idea what is the Microsoft Malware Fixit.
You should never have more than one security product installed on the PC, providing active protection / scan. This can cause performance problems, system instability and may adversely affect the effectiveness of these two products to provide protection.
-steve
Maybe you are looking for
-
Here is my EtreCheck report - other than making another gig of memory, what should I do? EtreCheck version: 2.9.12 (265) Report generated 2016-06-06 12:26:01 Download EtreCheck from https://etrecheck.com Time 06:54 Performance: Below average Click th
-
XS708E super hot race and crashes after about 2-3 weeks of use
Hi guys,. I installed the XS708E at home for my home enterntain system. I have reaised the switch may become hot after a while. The switch is installed in an open space where it is well ventilated. I realized that the perfomance of the switch slow do
-
1606 error received when you try to reinstall windows XP
When I tried a clean install of XP using the WINNT32.exe file, I get, 'Error 1606 could not access network location ". I used the "fixit" proposed thus Microsoft tool to do a repair of my registry. None has solved the problem. I'm not completely comp
-
Running Windows 98 on the same computer under Windows Vista Home Edition
I have a CD collection that will not play on Windows Vista, then how can I instal Windows 98? 300 GB of memory in 32-bit operating system, AMD (tm) 64 x 2 Dual Core Processor 4200 + 2.19 GHz memory.Assistance is welcome.
-
Message password incorrect on-screen even if no password login.
Hello! When I start my laptop, it shows the incorrect password and yet I didn't go the password again until I have click on the OK button and insert a password for the user account. Password error developed just a few days ago and often appear at the