Installation on Mac with OS 10.4.  Authorization Internet does not work. Telephone authorization does not work.

Similar Questions

• Installation of Mac with Officejet 6700 problems

  I try to install the disk that came with my Officejet 6700 and he tells me that it can't open because it works on the OS 10.7 or below, and I OS 10.8.2.  Y at - it somewhere that I can download a new version of the material so that it will be compatible with my printer?

  Hello

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107209-1&cc=us&DLC=en&LC=en&OS=219&product=5058338&sw_lang=

  Don't forget to select HP Software recommended when installing to get full functionality.

  Finally, after completing the installation, restart your Mac and run the software update to ensure that your drivers are up-to-date.

  Shlomi

• Mac with 10.6.8 newly installed does not detect printer

  I recently installed 10.6.8. on my mac. I have a HP officejet 6210 all in one which worked perfectly with my old operating system. When I tried to scan a few days ago, the scanner doesn't work but the impression was very good. The for some stupid reason, I reinstalled my old software from the original disk from HP and then printer or scanner would work. I have uninstalled and installed the following HP_Installer_Inkjet_Full_Group09_10.3.dmg [1/1, 145.63 M] from the HP website, but who could not find a device. I uninstalled and reinstalled my original disc software. (I think the actions of panic). When I go to print I get the following message: error/STATUS.

  Help! Please, I beg you.

  Hello topper27464

  Try the following links in order. The first should help you uninstall it from the Mac and the second should help you set up the printer again. Let me know if anything changes.

  Mac OS: How to manually uninstall the all-in-one software

  Macintosh: Installation of the software product under Mac OS X 10.6 (Snow Leopard) for a USB connection

• Installation of Mac says Safari is open, but it is not.

  MPBr

  10.8.3 OSX

  Adobe Flash Player Version 11.7.700.169

  Tried to install the latest Flash player when you are prompted.

  Flash installer says that Safari is open and he can't continue, then I check my tasks and Safari isn't open. I open safari and then close it with CMD + Q to make sure that all instances are closed. It does not work.

  Restart my computer to make sure that safari isn't open. Try to install again with fresh reboot. Flash installer says that Safari is open, and it cannot continue.

  Cannot install the most recent version of Flash, nor can I find information relating to this issue.

  Any help is appreciated (assuming that it is not a problem with the latest installer that will be fixed shortly).

  Thank you

  @Mike M - agreed!

  Note: Before using my method above, Safari has been completely closed and was not 'on '.  Users should definitely verify that Safari is completely closed, before taking further action.

• New HP PC with Windows 8, on the Internet, can not find the residential group of laptop, another PC HP and HP printer.

  Group residential troubleshooting on both PC cannot find something wrong looking Homegroup concludes nothing. Tried 'see network computers & peripherals' in the center network and sharing, takes a few minutes to search for with green bar showing the progress and then when it's 1/8 "to the end, it goes no further. I let it try for more than an hour and then tried again. Them twice, stopped at this place from 1/8 "and went no further.

  Hi, Arfoud,

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-8&V1H=win8tab1&V2H=win7tab1

  What it takes to set up a home network

  http://Windows.Microsoft.com/en-us/Windows-8/what-you-need-Setup-home-network

  The homegroup Windows problems

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows

  Sharing of files and printers

  http://Windows.Microsoft.com/en-us/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Unlock the Mac with Apple Watch

  I followed all the correct steps to unlock my mac with my Apple Watch, but it does not always work for me. I just get a wheel that rotates on the login screen and no point red notification on the watch

  Make sure that your Mac OS X is up to date. Open the App Store, and then select the updates menu.

  Ditto for your Apple Watch. Open the Watch on your iPhone app and then type general > software update

  Automatically unlock your Mac with your Apple Watch - Apple Support

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• During the installation of camera Raw 9.1 (Mac, with CS6) Photoshop seems to only show Camera Raw version 8.7 even though it said installation was successful?

  Hello: anyone can tell me why when I install Camera Raw 9.1 (Mac, with CS6) Photoshop seems to only show Camera Raw version 8.7 even though it said installation was successful?

  Bruce - thanks. I'm not sure you've seen this, but I looked on the "Update" menu on my laptop and updated the application manager. Who did the trick. I opened the Camera Raw 9.1 download successfully and it was installing on my hard drive, but without the CS 6 update, it was not to find the right place to go. This issue is now resolved, and updated the latest watch information box.

  Thank you!

  Craig

• Problem with installation on mac OS

  Hello, I just subscribe to a subscription creative suite package and well I installed photoshop, illustrator and indesign on my laptop. The problem is on my 2nd computer fixed at home, a mac with OS X 10.6.8 operating system... I started installation and get a message that the operating system is no longer compatible pour the new version of photoshop. Do you know if there are solutions? my mac is not old and I would really like to work on it. Thank you

  Adobe Creative Cloud is only compatible on Mac OS X 10.7 and above versions.

  However, for any Mac OS version as version 10.6.8 Snow Leopard, you can install Adobe Application Manager using which you can connect and install the version of Adobe apps compatible with your computer.

  Only few CC as InDesign version can be installed on Mac OS X 10.6.8

  Other applications, you can install the CS 6 version.

  Example:

  https://helpx.Adobe.com/InDesign/system-requirements.html#InDesign%20CC%20system%20require elements

  You can see CC 2015, CC 2014 is not compatible with Mac OS X 10.6.8 but the CC version is.

• How can I download CS6 on OSX 10.4 for later installation on a Mac with 10.8?

  I need to download on my Mac OSX 10.4 CS6 because we get new Mac with 10.8 in a few days. Technicians are bringing new machines and setting them up immediately and we do not have to pay them to stay around for several hours, while all software download with our terrible internet connection. Is there a link somewhere preventing me from downloading the files because of my version of the OS? I just want to download now, no installation.

  Please visit http://forums.adobe.com/message/5436486#5436486

• Installation of Dreamweaver 8 on Mac with case-sensitive file system

  Hello
  
  I just installed Dreamweaver 8 on my mac with a case-sensitive file system, and it seems not quite spectactularly. Dreamweaver constantly alert poster boxes claimin to not be able to find .js files - the file names correspond to what is actually on the system, except that the case is not going in a few places.
  
  Can anyone offer suggestions or solutions of workaround other than having to rebuild my computer everything from scratch?
  
  Thank you
  Tony
  

  I've tried that - there is much too much. I also tried to create symbolic links from the 'bad' file and folder to the 'right' file names and folder names, but that no longer works. I'll probably end up partitioning my drive and giving DW a small chest in. I hope that Adobe addresses this well. On a file system case sensitivity is something that web developers deal with on a regular basis and it seems odd that the editor may not actually run on one.

  Tony

• Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

  I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

  I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

  My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

  Summer spend hours online to find an answer and is now well bored.

  I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

  I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

  Is it possible to scan to a mac at all with this printer? Any help?

  Hi @sa9494,

  I see that you have problems with scanning. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Here is a screenshot of what it should look like. You have the scanning through top tab?

  

  I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Connect the printer with the USB cable, to see if you have the same results.

  Let me know.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• HP 1102 W on Mac with Lion

  I use a 1102w on a mac with a lion for some time with no problems but I just upgraded my machine and changed my ISP.

  For some reason any printers must be put back. I followed the procedure to insatll disk and was then charged with updating the firmware of the printer that I have done, since, so I can't get a wireless connection.

  The printer configuration page says not connected and IP = manual configuration.

  Under wireless settings

  Enabled state

  Ad-hoc communication mode

  the name (SSID) HP840B7E natwork

  This isn't my network SSID

  If I connect to this network when wireless rest

  Question how to re set up the details of the network because I can't go to the printer web page

  I tried the printer redefine the procedure without success

  I have fixed as follows.

  Connected a laptop Win XP without the 1102w printer installed on it.

  Used the HP installation disc and select Install option wireless

  Followed the instructions

  Hey Presto it finds the network and when I then turned off the laptop and on the mac mac would find as a wireless printer and it all works.

  Thank you very much for your help, it seems that MAC installation is kind of suspect because it does not give the option Wireless install

• I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6. Now he says I need to activate windows again, but he said I need a new activation key. Any ideas would be appreciated

  I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6.  Now he says I need to activate windows again, but he said I need a new activation key.  Any ideas would be appreciated

  Yes, you must purchase a full license for the second installation of Windows 7 product key.  1 activation allows only one Windows 7 product key.  Apparently, you now have a second facility that requires a second product key. Carey Frisch

• I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message "could not complete your request because the file appears to be a model of camera that is n

  I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message that "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information. "Yet the Nikon D800 is on the list of supported devices.  Can anyone help?

  And temporarily disable the Gatekeeper by allowing downloads from anywhere, or your installer will be marked as 'damaged' because that CS5 is out before Gatekeeper and is not "signed" that is not approved.