Installation on two different computers

Similar Questions

• You can use the x 86 version and the x 64 version on two different computers

  I have a key/installation of Windows 7, which can be used for installing the x 86 version or the x 64 version. Could I use the x 86 version and the x 64 version on two different computers?

  Hi hgcxngv,

  No - not at the same time.  A key is an installation by the license agreement (regardless of the size of bits).   Is excluding the special manufacturer or license multiple keys which normally applies to companies and I am sure that you would know if you had a since they would cost much more to buy and were more difficult to obtain (if you remember).

  You can install by using 32 bit on a computer and then uninstall it from this computer and install the 64-bit on the other or vice versa (although you'll probably need to use the help of phone to activate the second time since the automated process will most likely perceive it as an attempt to both facilities and reject and you will need manual for past this problem).

  The foregoing does not apply to OEM licenses that cannot be installed on computers with they came, live and die with this computer (even if the key would have worked on each version, perhaps in order to simplify things for the manufacturer).

  I hope this helps.

  Good luck!

  Kosh

• If you have CC on two different computers and you forget to sign out how do you use CC on the second computer?

  If you have CC installed on two different computers and you forget to sign out how do you use CC on the second computer?

  Please see this link for more information on the installation of creative cloud on multiple computers:

  FAQ: Can I install Creative Cloud on several computers?

• have two different computers and have problems recoving from hybernation. Locking the system

  Original title: recovery of hybernation

  I have two different computers MS 7 and have all two issues recoving from hybernation. They lock just straight up (do not accept an entry mouse or keyboard) and requir3e hard re boot. Goes 8 to 10 times a week.

  Hello

  (1) did you of recent changes to the computer before the show?

  (2) is the specific question at the opening of specific applications or programs?

  (3) you get an error message?

  You can perform the following methods and check if it helps.

  Method 1: Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  2 the resolution of the problems of method Performance

  Run the troubleshooter of performance, then check if it helps.

  Check out the link: http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter

  Method3:How to troubleshoot performance problems with sleep, hibernation and resume:

  http://support.Microsoft.com/kb/950686

  Note: The article remains valid for Windows 7 also if it is for Vista.

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 4: update video drivers card

  Check if the video card drivers are up to date. Install the latest video card drivers for Windows 7 on the manufacturer's Web site.

  Tips for solving common driver problems:

   http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  It will be useful.

• wrong message: identity adobe already used on two different computers

  Hello

  I have an adobe acteuell identity. He since 2005 are registered products, currently I use CC (annual duration) and Premiere Elements on Mac OS on an iMac.

  As I read, my license to use the software on two computers.

  Now, I configured a laptop computer with WIN10 and want to install Lightroom.

  Unfortunately, I get the message of this identity of adobe, already used to activate the software on two different computers. This message does not match the facts. Activated the single device namely seems only imacW.local. Although I installed on my ipad LR, I haven't needed, because it is not very easy to use, but I guess that this circumstance for my problem is meaningless, since this unit is also not displayed as enabled and so I could not turn off it.

  For completeness: I've always found an 'old' and unused adobe identity, I is not necessary and can be deleted. There's a free subscription to creative cloud (probably for a long time exceeded) - but no device! -registered. Maybe it's 'second computer?

  Wolfgang

  The message of the two active facilities apply only to one account.  Maybe did you sign twice without having signed the time?

• CC on two different computers?

  Is it possible to use CC on two different computers, by two different people?  If so, how?

  No.... the OWNER is authorized to activate on 2 computers, but only use one at a time

  Activation of the software may not be shared with anyone else

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

• I was unable to download the free trial version Acrobat Pro DC.  Tried on two different computers - Mac.  Message says cannot download.  What do you do to get the program to download?

  I was unable to download the free trial version Acrobat Pro DC.  Tried on two different computers - Mac.  Message says cannot download.  What do you do to get the program to download?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• I already have 5 Lightroom and installed on my PC. Yesterday, I bought a Macbook Pro and I would like to install my Lightroom 5 in my new Macbook Pro. Is it possible to install on two different computers? If so, how is it possible to install by Inter

  I already have 5 Lightroom and installed on my PC. Yesterday, I bought a Macbook Pro and I would like to install my Lightroom 5 in my new Macbook Pro. Is it possible to install on two different computers? If Yes, how is it possible to install via the Internet, like my Macbook Pro doesn't have CD Driver. Thank you very much for your support. Hope.

  Hello

  You can install and activate the perpetual software (purchased) two computers, as long as you don't use it on one at a time.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  Please find the link below to download:-Download Photoshop Lightroom

• If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as a photoshop and illustrator, for example.

  If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as one for photoshop and Illustrator for example.adobe

  This excerpt from: terms of conditions of use Adobe software should help to clarify the terms for you:

  ..... You can activate the software on up to 2 devices (or virtual machines) at the same time, if these activations are associated with the same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.

  You can also see:FAQ: where can I find the terms of membership and the terms of use?

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• Synchronize a .muse file in two different computers before downloading

  I used to keep the site updated, but now someone else will update another section of the Web site.

  So I have the .muse file on my computer and the other person have an identical copy of the .muse file.

  My question is: if I make the changes on the Web site, its .muse file will be synchronized until it can make changes?

  I know that when I edit the file online, I receive a message asking to synchronize the file before editing it, but I don't know if is the same thing with editing the file to two different computers.

  Thanks in advance for any help...

  Johnny

  Hi Johnny,.

  You may be better to store the .muse file in Dropbox for example or you two work from that. Of course, you cannot work on it at the same time however, but you will always have the most recent. Don't forget to keep your goods here as well.

• If I buy 5 Lightroom can I install on two different computers?

  If I buy 5 Lightroom download on two different computers?

  As they are for your use, Yes.

• Can I manage a site using two different computers using Dreamweaver CS6?

  Can I manage a site using two different computers using Dreamweaver CS6?

  Yes, by using Check In / Check Out and a computer do not replace the work of the other or create copies in conflict.

• Installation on two different Macs?

  It is my understanding that CC 2015 programs can be installed on two different Macs.

  1. However, the CC on the two computers cannot be used at the same time? Is this correct? Does this mean that I won't be able to make the video on a Mac while opening one different program on each other?

  2. If so, whether I am working on a project of LR AI, PS, PP or AE, on a single computer, I am able to pick up where I left off on another computer a few minutes later? What does it take to be used at the same time? If a project is opened on a computer and it is not closed for hours, it is considered as being used? I have you quit all programs on a computer before any intervention on the other?

  Thank you.

  You can install it on as many machines as you want, Mac or Windows or both.  Of these facilities, only two can be in an activated State (signed in).  Of these two active devices only may be using the subscription at the same time.  The subscription is in use when any single application of it is in use.  If a program is open, it is used.

• Can I synchronize the counters on two different computers in the C API?

  I installed the M-series cards (6254) in several computers. I would like to synchronize the counters for each card.  The best way that I came with to do this was to have the counter on each counter entries read a common external clock signal running at 10 KHz I have would then feed a second signal to each card and trigger the task that runs each counter starts when the second line goes high.

  Following the examples provided with the C API, it was easy to get each card KHz signal and then to match the beginning of the counter that I tried to read

  DAQmxCfgDigEdgeStartTrig (taskHandle, inputLineStr, DAQmx_Val_Rising);

  However, this did not work and gave me the following error:

  DAQmx error: the specified property is not supported by the device or is not applicable to the task.
  
  Property: DAQmx_StartTrig_Type
  
  Task name: task
  State code:-200452
  
  End of the program, press the Enter key to exit
  
  

  I know it's very simple sync the cards within a computer using the RTSI interface, but it is not possible that my cards have to reside in different computers.

  It is even possible to synchronize the counters on computers, and if yes how can I do it with the C API?

  ------------------

  Here's what I've written so far:

  
  
  
  
  #define DAQmxErrChk (functionCall) if (DAQmxFailed (error = (functionCall))) goto error; on the other
  int main (void)
  
  {
  
          int         error = 0;
  
          TaskHandle  taskHandle = 0;
  
          uInt32      data = 0;
  
          tank        errBuff [2048] = {'\0'};
  DAQmxErrChk (DAQmxCreateTask ("task", & taskHandle));
  
          DAQmxErrChk (DAQmxCreateCICountEdgesChan(taskHandle,"/Dev1/ctr0","",DAQmx_Val_Rising,0,DAQmx_Val_CountUp));
  
          DAQmxErrChk (DAQmxConnectTerms ("/ 10MhzRefClock/Dev1", "/ PFI8/Dev1", DAQmx_Val_DoNotInvertPolarity));
  
          DAQmxErrChk (DAQmxCfgDigEdgeStartTrig(taskHandle,"/Dev1/PFI14",DAQmx_Val_Rising));
  DAQmxErrChk (DAQmxStartTask (taskHandle));
  printf ("without interruption of the poll. Press Ctrl + C to interrupt\n");
  
          While {} (1)
  
                  DAQmxErrChk (DAQmxReadCounterScalarU32(taskHandle,10.0,&data,));
  
                  printf ("\rCount: %u", data);
  
                  fflush (stdout);
  
         	}
  
  Error:
  
          puts("");
  
          If (DAQmxFailed (error))
  
                  DAQmxGetExtendedErrorInfo (errBuff, 2048);
  
          If (taskHandle! = 0) {}
  
                  /*********************************************/
  
                  Stop DAQmx code
  
                  /*********************************************/
  
                  DAQmxStopTask (taskHandle);
  
                  DAQmxClearTask (taskHandle);
  
          }
  
          If (DAQmxFailed (error))
  
                  printf ("error DAQmx: %s\n",errBuff); ")
  
          printf ("end of the program, press the Enter key to quit\n");
  
          GetChar ();
  
          return 0;
  
  }
  
  

  Hi neurostu,

  Arms start triggers are disabled by default, so they do not have a default PFI line.

  You will need to set some properties DAQmx to configure a trigger for start of arms. Try adding between DAQmxCreateCICountEdgesChan() and DAQmxStartTask():

  DAQmxSetArmStartTrigType (taskHandle, DAQmx_Val_DigEdge);

  DAQmxSetDigEdgeArmStartTrigSrc (taskHandle, "/ Dev1/PFI14" ');

  DAQmxSetDigEdgeArmStartTrigEdge (taskHandle, DAQmx_Val_Rising);

  You have the file "help NOR-DAQmx C reference"? It should contain descriptions of the trigger > more > arm Start properties.

  Brad