Installation on two different Macs?

Similar Questions

• Use of two different MAC addresses EX60

  Hello outthere.

  I use an EX60 for testing. Everything works fine, but my colleagues told me that endpoint uses two different MAC addresses. These addresses are seen on the switch will remain the ex60 ist connected.

  The situation has not changed after doing a factory default.

  It's a kind of Mystic, because my ex90 do not use two MAC addresses.

  So the question is, what is the diffrence between ex60 and ex90? Is this a normal behavior on ex60?

  I hope someone can help me!

  Greetings from the Austria

  Martin

  Hello

  Using a touchscreen on the EX60? I think that the 2nd MAC address will probably be that of the touchscreen attached. How to check? The MAC address of the EX60 can be verified using the API. SSH into the EX60 and run:

  XStatus network //Mac

  * s network 1 Ethernet MacAddress: "00:50:60:05:52:BA."

  * end

  Ok

  The MAC address of the button can be controlled via access root for the codec.

  SystemTools rootsettings on

  [dderidde-ex90-desktop: ~] $ arp - a

  ARM3. LocalNet (169.254.0.13) to 00:e0:0 c: 00:8 c: 43 [ether] on eth1

  arm0. LocalNet (169.254.0.10) to 00:e0:0 c: 00:8 c: 40 [ether] on eth1

  ARM2. LocalNet (169.254.0.12) to 00:e0:0 c: 00:8 c: 42 [ether] on eth1

  HSRP-10-48-2 - 1.cisco.com (10.48.2.1) at 00:00: 0C: 07:ac: 00 [ether] on eth0

  ARM1. LocalNet (169.254.0.11) to 00:e0:0 c: 00:8 c: 41 [ether] on eth1

  Arm4.LocalNet (169.254.0.14) to 00:e0:0 c: 00:8 c: 44 [ether] on eth1

  [dderidde-ex90-desktop: ~] $

  My contact is not directly connected, so can't see here, only the gateway address MAC address. But you should see the touch directly connected.

  Otherwise, there is a sticker on the back of touch with serial number, and I think, MAC also.

  We have a DDT open for this behavior.

  CSCtz86298 - 802. 1 x is not handled properly on device with PC port and / or Touch

  Greetings from Belgium.

  Danny.

• This virtual machine may have been moved or copied during the priming two different Macs from the external SSD drive

  I am using this SSD external boot drive to start two different iMacs at work and home, making all my stuff to update this SSD.

  However, when I open the virtual machine in Mac OS X Server 10.6.8 (Snow Leopard) on VMware Fusion on OS X 10.8.3 5.0.3 (Cougar) installed on startup such external SSD disk, VMware asks what follows by trying to open the virtual machine on the FIRST Mac:

  "This virtual machine may have been moved or copied. In addition, I saw:

  Q.) VMware tells me: "this virtual machine may have been moved or copied. What should I do?

  VulnHub - Frequently asked Questions

  Choose "I moved it", or "I copied it"?

  Is it possible to PREVENT VMware Fusion ASKING such question with each single switch to Mac (as said, I always start the two Macs at work and home from the same SSD drive)?

  Thank you.

  VirtualMac2009 wrote: WoodyZ, the "Mac OS X Server 10.6 64 - bit.vmx" has a lot of lines. I understand that I should just stick

  UUID.action = 'keep '.

  the last line and save. Right?

  The order of placement of the options in the .vmx configuration file are not relevant as long as each is on its own line.

  On the other hand, I hope than boot from SSD external drive to start two different Macs (one at work and one at home) will not break she like says dlhotka.

  The main issue will be the differences between the CPU and according to what difference, say a Core 2 Duo vs Quad Core this by itself may be sufficient to trigger WPA on a Windows Virtual Machine.   Like many a Client in Mac OS X or OS X Client that shouldn't be a problem however with Mac OS X Server or OS X Server so that I moved it with a Core 2 Duo vs Quad Core, I have not had problems yet but the haven of the exhaustive tests with the server version.  I think it will go well, however, we should always do... maintain appropriate backups!

  Post edited by: WoodyZ - point makes it dlhotka about snapshots is a very good and must be taken into account! ;)

• Can I synchronize my files from my space creative cloud on two different Macs?

  Can I synchronize my files from my space creative cloud on two different Macs?

  One of your fellow '' solves the problem. There was a problem with the software of cc. We have uninstalled and deleted the cache and preferences etc. Re installed and now all files sync ok.

  Thanks for your reply.

• HPScan closes unexpectedly on two different Macs use 10.6.6 (nine c410a)

  I just bought a new HP Photosmart Premium C410a and was able to use HP Scan successfully several times. Now, every time I try to use it on a Mac, I installed it on, I get the resignation unexpected error.

  I have installed the printer software HP from the installation disk supplied with the printer on:

  • mid-2010 MacBook Pro running 10.6.6 (HP Scan worked on this machine the first time I tried it)
  • Windows 7 Enterprise (on a virtual machine in VMware Fusion). The crash seemed to start after this step, but I'm not positive about that). Scanning of books without any problem on this virtual machine.
  • end 2008 13 "MacBook running 10.6.6

  All three machines are running all the updates of their OS' and I've checked that the HP software is updated all three machines.

  I tried to restart two Macs, uninstall the HP software and then put it back, repair disk permissions, and trashing all HP printing preferences, but HP Scan always blocks on open.

  I can print without any problems - it's just scanning it is a problem.

  Additional suggestions welcome.

  Unfortunately, this does not work.   I ended my HD backup, reset it and reinstall OS x, then the printer software.

  HPScan now works without any problem.

• Installation on two different computers

  I have a Mac computer, I also have Windows. Windows has my larger hard drive. I want to be able to edit my photos in my room on my Mac while I'm not stuck in a room all day. With my laptop, I can at least walk around the House or go edit outside or go to the local coffee shop.

  Having a problem installing on both? A subscription to creative cloud allows installation and signature two machines and they can be Windows, Mac, or one of each.

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• External hard drive causing Finder freeze on two different Macs

  I have had this problem since I upgraded to Yosemite. I recently replaced my old for a PCie 512 GB (Mac Pro) and faster SSD AngelBird SSD (MBP 17 "), respectively, both with clean install of the operating system and migrate my data above and the problem persists.

  Someone else has this problem of Finder having a complete collapse if one or the other hard disk is connected (any type) or Finder is asked to find something (for example to download the tracks on SoundCloud or WeTransfer) using any web browser, or know if this question (I know other people suffer from) is set by El Capitan?

  Thank you very much!

  This looks like a problem with your external drive. I recently had a similar problem that turned out to be a bad PSU (power supply) on the outside. The upgrade never helps when there are questions, it may exacerbate them. This happens without the connected external?

• On two different Macs. 10.6.8 and 10.7.2. After recent upgrades I don't see more bookmark icons in my menu drop-down. I see them in the view "show all bookmarks".

  It's Firefox 9.0.1.

  Hi brilaz,

  You should take a look at this article which discusses some of the problems with the latest version of Firefox.

  There is some information here that should help you solve your problem. Fortunately, this is a very easy solution.

  Hope this helps!

• FTP with CS5.5 problem on two different Mac?

  I have Dreamweaver CS5.5 on my iMac OSX10.7.5 this version that I use all the time to download on my Web Hosting site.

  I also have a Macbook with OSX 10.9.5 I use when I travel. I also loaded the same version of Dreamweaver, but I just can't put in place to communicate with my webhost. It is said

  "To view the file in your repository, you must set its Version control settings.

  I tried to do as well, but without success. I really need to be able to update my site when I'm traveling and I was unable to do so.

  I recently bought this new MacBook, I used to have an older MacBook with a Macromedia Dreamweaver version and had no problem.

  John, thanks for the suggestion, but it wasn't the problem, I finally after trying and errors it is resolved by removing the preferences and restarting my machine.

• Export file does not work in print.  I have to export each file to be afraid that twice so that he could appear.  I have two different Macs and it works like that on both.  I've upgraded to the latest version of Lightroom and it still does not.

  When I try to print to file in the print module, I have to repeat the task at least twice to make it work.  Everyone knows about this problem?  Do exactly the same thing on my new macbook pro and office.  Tried updating to the latest version of Lightroom without success.

  You are on El capitan? El capitan is sometimes extremely slow to show you when you have added a file to a folder. This is probably, but it is simply not yet show it to you. Close finder window and reopening could realize it's there. I also noticed that list of files on the command line will make these files appear suddenly in the finder.

• I was unable to download the free trial version Acrobat Pro DC.  Tried on two different computers - Mac.  Message says cannot download.  What do you do to get the program to download?

  I was unable to download the free trial version Acrobat Pro DC.  Tried on two different computers - Mac.  Message says cannot download.  What do you do to get the program to download?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• Mac, WRT 54 G, can I access a MFC9320 brother on two different subnets?

  (domestic use) I have a USB Server that I can access my USB printer on two different subnets and I was wondering if I can do the same thing on the WRT54G. I use 192.xxx.xxx.x for internet use and 198.xxx.xxx.x for each thing, like file sharing of multiplayer games, etc. Only, I named the 'locations' to 'Internet' or 'Games' (with games being used for everything else). With the USB Server set to "ZerocConfig" I could access USB printers on both.  I could set up the printer with a static IP printer 'Place' and then change location every time we wanted to print to it, but I would like to save a step. It's not that big a deal for me, but have to "Remind" everybody whenever they wanted to print something on it, would get old. Don't want to hang the brother to the USB Server if I have the wireless. It is not the smallest thing in the world to find a place for it in any case.

  I guess my other question would be, taking the other subnet is it safer (from the internet) using this way he or she is just in my mind. I did the on a third location of 'White', the family put their computers (no IP #) when they are just playing games, homework, etc..

  Thank you

  I don't think it's possible to run the USB printer on two different subnet. There is no such feature on the router.

• Is it possible to implement two different 'profiles' or 'locations' to my network settings?

  De : RevMDR

  I have a wireless home network that automatically assigns the IP address and the info for my new laptop (Vista).  At work, I have to manually enter the IP address and the following info to get a Wi - Fi connection.

  Is there a way to Vista to implement two different 'profiles' or 'locations' I can easily go to change my IP settings, so I don't have to go to network connections and change them whenever I passes between the two places?

  If Vista is unable to do this, is there a program I can buy/download that will do for me?

  Thank you!

  I have not tested on the wireless, but I do work on the connected.

  This how to can help, ipconfig

  How to set up multiple addresses on NIC IP how to configure two IP addresses on a computer

  How to use MS DHCP in order to reserve an IP address on MAC, how to use the TCP/IP protocol without

  Installation of a NIC...

  www.howtonetworking.com/Networking/ipconfig.htm--

  Bob Lee, MS - MVP, MCSE & CNE

  Networking, Internet, routing, VPN Troubleshooting

  http://www.ChicagoTech.NET

  How to setup Windows, network, VPN & remote access on

  http://www.HowToNetworking.com

  De :  Robert L. (MS - MVP)

  Another response of the community of Windows Vista discussion groups

• Defines a cloud, two different software

  I have my CC account in use on two computers.

  Why do I get a different suite of software showing on each component for the CC Office applications?

  A computer is a Mac, the other not.

  For example: there is no Media Encoder available on the computer that is running Windows...

  Shouldn't the two instances of the CC Office give identical to installation, although choice different platforms?

  CIAO

  This can help:

  FAQ: What are the system requirements for the desktop creative cloud application and every creative application of Cloud?

• PSE 8 Installer works only on Mac OS 10.5 or 10.6

  I am new to Adobe. This is my first product. No Adobe product on my machines, other than Adobe Acrobat Reader.

  Tried to install Photoshop Elements 8 for Mac on two different MacBook aluminum - running an OS 10.5 and the other 10.6.

  There is no installation program that runs after you insert the DVD.

  I get an icon on the desktop. By clicking on the icon shows me several files on the drive - including reading Readme that says to install just "follow the instructions on the screen.

  There is a file called "setup" - but when I click it asks for my password. I did not provide the password because it is not just feel it's the right way to install this software.

  Any ideas on how to get the installer to run?

  Thanks in advance.

  See you soon,.

  Michael

  Yes, this is the right way to install, UN-maclike, although it is. Do not your admin password to install.