Installation problems and fix missing cache

Similar Questions

• During the installation of the ultimate upgrade, get "one or several components of the system could not be configured", then it restarts and pours me to premium.___How can I say what is the cause of the problem and fix it?

  I have the same problem as Laweaver.
  I have a HP pavillion Model # m9040n running the 32-bit version with service pack 1.
  My Vista Ultimate Upgrade drive is 32 bit and also has Service Pack 1 on it.
  I ran my system through the Microsoft Update and it is common.
  I ran Vista Advisor and he tells me that everything is good to go.
  I also ran my system through the center of update of HP and he is current.
  I tried the Ultimate Upgrade three times and got the same message twice.
  Of course, it waits until it reaches "end of the upgrade" before it fails.
  I turned all the extra wide including the firewall when I tried the upgrades
  My computer came with the home edition Premium already installed on it and I have the disks of backup for him if I have to do a repair on it.
  I have the same question though - how to tell what the cause of the problem and fix?
  Thank you
  Rich

  Hi Eaglesoar1,

  This problem occurs because some features of Windows Vista cannot be migrated to the upgraded version of Windows Vista.

  To resolve this issue, follow these steps:

  1. click on Start, type programs and features in the search box, and then click programs and features in the list programs.
  2. under tasks, click on turn Windows features on or OFF.
  If you are prompted for an administrator password, type the password. If you are prompted to confirm, click continue.
  3. Click to clear the check boxes for the following features:
  o Microsoft .NET Framework 3.0\XPS Viewer
  O remote differential compression
  O DFS replication service window
  4 upgrade Windows Vista to a more advanced version and then click to select the check boxes that you clicked to clear in step 3.

  For more information see the Microsoft kb article below.
  Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.
  http://support.Microsoft.com/kb/946078

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• T400: Problem and FIX for UK Conexant Audio Driver for Windows Vista and XP (4.92.2.0 2009/04/23)

  Hello

  I installed the new drivers Conexant for my T400 (the driver is also for R400, R500, T400, T500, W500, W700, W700ds, X 200, X200s, X 200 Tablet, X 301) yesterday.

  This morning I had to adjust the smart-audio feature works correctly with my helmet of docking station for VoIP calls. The control panel SmartAudio applet would work well. It crashes.

  Today a .net developer and that it is a .net application I got it debugged in Visual Studio. The problem, apparently, is that the folder "C:\Program Files\CONEXANT\SAII\en-GB" does not exist on my machine. Of course, it is true. The solution is to go to "C:\Program Files\CONEXANT\SAII" and copy the contents of the "en-US" folder to a new folder "en-GB".

  Just thought I'd share this incase anyone else has problems and so Lenovo can fix if all goes well the installation. I suspect it will be wishful thinking, to provide them with real ENGLISH values for resources in en - GB instead of corrupt English which is probably in the American version resources

  Andrew

  Moderator Note: Type added to the line object for clarity.

  
  

• Our daughter gave us his laptop HP that has no disk recovery or installation disk. There is now a message that the hal.dll is missing. Can I buy a Vista installation disk and fix it?

  Windows Vista crashed, and we do not have the original installation disc for Vista. Can you buy Vista Ultimate and proceed to install it?

  Hello

  Here are the different ways to reinstal vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  with HP normally press you F11 at startup to start the recovery process

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I hv with updated installation problem and receive error message-_ "WindowsUpdate_00000646" "WindowsUpdate_dt000" __last 3 days, I get the same error __need help... _

  Error message

  "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  Help me

  Once again thank you

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I activate my machine in stand by mode all USB keys are non-functional, unless I have re-boot or sign out and sign back in. Any ideas of the problem and fixing it?

  The machine is HP nc6400

  Hello

  · What is the service pack installed on the computer?

  · Will there be any changes made on the computer before the show?

  Follow the steps in the link below and check if this may help: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

  See also: peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation: http://support.microsoft.com/kb/871233

• Migration Windows 32-bit to 64-bit Linux and fix missing 10.2.0.4.12P

  I'm migrating a 10.2.0.4 database of 32-bit Windows to 64-bit Linux. I use OPatch to ensure that the RDBMS software is at the same level and have found I have patch #7522473 (10.2.0.4.12P) installed in my house Oracle Windows but not Linux. I can't find the Linux 64-bit equivalent. Any idea where I could find this?

  The 'P' in the way patch number is platform-specific. Windows patch bundles are completely different from the rest of the platforms supported, like for Windows patches are merged into the bundle and binary are precompiled, there is no unique pieces for the Oracle executable files. For other platforms, Oracle releases the files objects that solve a problem specific and executable are reprinted in the moment with them. If this patch is in conflict with some other exceptional items, you request a merge or wait for a power supply. This means have probably Oracle under Windows in perfect synchronization with Oracle everywhere else patch-wise - you do not have control on which patches are included in clusters of Windows patch and there may be cases where the batch of Windows hotfixes merges some one-offs for which no merger is on other platforms.

  And Jean Valentine advice is correct: patch to 10.2.0.5 then to CPUJan2011.

• Installation problem and try to use Lightroom CC

  I used the cc app to download and install Lightroom CC, when I try to launch the program that the mouse goes into a wheel for a moment, nothing happens. I tried a disconnection and return, uninstalling and reinstalling. I use w7 64-bit, CC of Photoshop and bridge work very well. 5.7 Lightroom still works fine. Help, please.

  CC applications close immediately after the launch

• Applications and updates Windows installation problems

  Original title: using windows vista Installer problems and having

  nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

  Hi DaroldMILLER,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What applications/programs you install?

  ·         You install updates?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Problem installing programs and applications:

  Method 1: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Troubleshoot installing or uninstalling programs

   

  Problem installing Windows updates:

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• R12 on HP - UX installation problem

  Hello
  
  I'm getting following error while installing R12 Vision demo DB on HP UX (11.31 (v).
  
  We already have three other instances that are running on the same server.
  
  All verified prerequisites.
  
  Installation with the root user account in the light of the applvis for application and database users oravis.
  
  ......................................
  
  Treatment Disk17...
  
  Treatment Disk18...
  
  Treatment Disk19...
  
  Treatment Disk20...
  
  Treatment Disk21...
  
  AC-00023: error: Exception: java.io.FileNotFoundException: /devbackup/oravis/db/tech_st/10.2.0/temp/restart.xml (Permission denied (errno:13)) occurred while writing to the file context - /devbackup/oravis/db/tech_st/10.2.0/temp/restart.xml)
  
  Unzip failed:
  
  Complete installation of the impossible database
  
  
  Q. as long as observeed other disks are able to unpack seems so another question, I tried two different steps. Am I wrong?
  
  Is some other errors also in other newspapers.
  
  Q: how to download files from log with the forum?
  
  Kind regards
  Sandeep.

  Hello

  AC-00023: error: Exception: java.io.FileNotFoundException: /devbackup/oravis/db/tech_st/10.2.0/temp/restart.xml (Permission denied (errno:13)) occurred while writing to the file context - /devbackup/oravis/db/tech_st/10.2.0/temp/restart.xml)

  Unzip failed:

  Complete installation of the impossible database

  Q. as long as observeed other disks are able to unpack seems so another question, I tried two different steps. Am I wrong?

  If the permission is set correctly, then more properly your scene region directory is corrupt. The same error is reported in (Note: 467263.1 - AC-00023: error: Exception: java.io.FileNotFoundException: xx/eb01/rdb/10.2.0/temp/restart.xml, Permission denied, R12.0 The Performing when Vision New Installation as root) and you can check the integrity of this directory of staging area by referring to:

  Note: 802195.1---> checksums MD5 for R12.1.1 Quick Install Media if you install 12.1.1
  Note: 728000.1---> checksums MD5 for R12.0.4 Quick Install Media if you install 12.0.4

  Is some other errors also in other newspapers.

  What are the other errors? Can post you it here?

  Q: how to download files from log with the forum?

  Download the logs for all Web hosting and post the link here, or just after the part that displays the error. I think the problem with the step domain directory, so before posting files newspaper here, I'd say you check the integrity of the installation directory and fix the issue before resuming RapidWiz everywhere.

  Kind regards
  Hussein

• K5 (snapdragon 415) Vibe Lenovo problems and bugs...

  This new form is only dedicated to all the problems and fixes for Lenovo vibe combined k5 (snapdtagon415). Please report all problems in this post. Also give the problem of bugs and suggestions for future updates.

  (1) uninstall all preinstalled applications and disable applications that can not be installed.

  (2) a lot of apps running in the background, then check all of the apps you don't want to run in the background Manager. Do carefully and do not disable the apps like WhatsApp, Facebook, etc.

  (3) disable Google use user data for Google as Google keyboard applications collection.

  (4) use a black as wallpaper background picture as it can reduce the use of heat and battery.

  (5) any suggestions more? Message using Heating_Battery message Tag.

  Note from the admin; thread locked.
  https://forums.Lenovo.com/T5/K-and-vibe-Z-series-smartphones/important-guidance-from-the-community-T...

• SART menu and taskbar missing

  My sart menu not hiding but her down off the screen. How can I go back so I can see?

  The game, December 9, 2010 17:23:24 + 0000, garth hume wrote:
   
  > my sart menu not hiding but her down off the screen. How can I go back so I can see?
   
   
   
  The taskbar is resizable, like a window, and it can be set to zero
  lines of ups. Maybe that's your problem, and fixing must be the
  first thing you should try. You may have accidentally resized to
  zero lines of ups. Place the cursor on the bottom of the screen and pass
  it upward and down slightly until it turns into a two-headed arrow.
  Click on, and then drag it to the desired size.
   

  Ken Blake, Microsoft MVP

• Why is my Windows fax and analysis missing file?

  I can't send a fax more.  I've looked everywhere in my computer and printer don't files now no way to fax. Printer is a HP all-in-one and is supposed to send faxes. Computer has pci soft modem and braodband connection.

  Hi Viv27,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/3ba1dd59-3cfc-40D6-ab4e-be43c53c601a

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Your PC has encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart...

  * This message shows in my laptop 4 days or 3 times...

  * I just buy my computer laptop sony vaio before 3 months.

  * my model number is SVE15127CNB, and there the bones of windows8 geninue just purchase the laptop computer sir...

  * Please help it's problem and fix tis problem my laptop...

  Your computer is almost brand new.  Support for Sony has the responsibility to guarantee completely, including the responsibility for the management of the windows software 8, really better know their computers and problems users have with them... and I hope that the easy solution for you.

  They will need a little more detail than anyone to even begin to help you with this.  So write any descriptions of error messages and error numbers that see you.  Try to be specific!

• Adobe Application Manager corrupt - are trying to install the new copy will fail because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  Adobe Application Manager is corrupt and allows a reinstallation try Fail Adobe Acrobat Pro XI - try to install the new copy of the AAM fails because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Build Version - 9.0.0.244

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Exploitation forest verbosity level set to 4

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | CREATING Instance PIM...

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Detected db journal file, Adobe Application Manager is in a State damaged to C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Adobe Application Manager is needed to solve this problem. However, it is missing or damaged.

  Download a new copy of Adobe Application Manager of http://www.Adobe.com ,

  or re install this product.

  06/04/16 16:23:29:507. [FATAL] |  | USS | The installation program. The installation program.  |  | 6256 | Cannot create the PIM item

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "986b04a2-3099-49fd-9067-df69c36ff2b2."

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "e5f02581-649c-49ec-a265-800eeb5ad426."

  Does anyone have an idea what to do? I use Windows 7 as operating system

  Hi Ruedigerd91465945,

  Well try download and install Adobe Application manager from here: Adobe - Adobe Application Manager: For Windows: Adobe Application Manager: thank you

  Before installing kindly, restart the machine and then rename the folder in C:\Program Files (x 86) OOBE \Common Files\Adobe\OOBE\PDApp as OOBE_OLD

  Let us know if that helps.