When I activate my machine in stand by mode all USB keys are non-functional, unless I have re-boot or sign out and sign back in. Any ideas of the problem and fixing it?

Similar Questions

• Embedded video Youtube scrolls on the header.  I have seen discussions on the z-index but it doesn't seem to work when I try it.  Any ideas what the problem might be?

  Check it out here Helix technology | Natural form®

  This is possible by creating a separate layer and adding video content, as I check the page I think you have already corrected this.

  Thank you

  Sanjit

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

  Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

  Move on to the Discussion of Photoshop

• Have volume of CS3 and CS5 licenses I need to disable. Any ideas? The customer support is not available.

  Have volume of CS3 and CS5 licenses I need to disable. Any ideas? The customer support is not available.

  http://helpx.Adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

• Often, when I let my computer go "standby mode" I will return and the mouse pointer disappeared. I have to start cold to get it back. Any ideas?

  Happening all the time, just enough to make it boring. The computer is only a little over a year old so I think that some of the software is corrupted. Of course, I don't know much about computers, but I don't know that I don't want to shell out money for a fixable problem. Thank you to each and every one.

  Hi Denny,

  Thanks for posting your question in the Microsoft Community.

  I understand that your mouse pointer is missing after the return of the mode 'sleep'. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . What is the brand and model of the computer and the mouse?

  Please follow the steps and check the question below:

  a. open the Device Manager, expand Devices of Interface.

  b. right-click on the USB input device, click Properties.

  c. click the power management tab, select the allow this device to wake the computer, click on OK.

  For reference:

   

  Open the Device Manager:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• When I scroll my mouse to the left it will kick me back to my page when on the web... any ideas on the place where this difficulty in mouse control settings?

  all the answers to my title?

  Hi Jerry L 1969,.

  1. what browser do you use?

  2 are you facing this problem when you are online?

  3. using a laptop or desktop?

  4. What is the brand and model of the mouse?

  5. don't you make changes on the computer before this problem?

  (a) that you are trying to run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.

  (b) you can also download & run Microsoft Security Essentials on your computer.

  Hope the helps of information.
  Please post back and we do know.

• I have a signature "Topaz" T-S751 capture buffer. I use it for word and our record electronic med clinic. I can't make it work. Anyone has any ideas to this problem?

  I use capture signature for patient consent forms, staff in order to close the medical records, etc..

  Contact the manufacturer and see if there are troubleshooting or diagnostic process / test to see what the problem with the device.  He may simply have failed.

• I searched in the app store and now my app store has changed and he won't go back. Any ideas?

  I searched on the app store and the app store has now changed only the element I searched and didn't return to the original format.  Any ideas?

  Hello MACMANPHS,

  In the app Store, you can try to sweep upward slightly at the bottom of the screen, a bar should appear at the top, one of the options would be welcome, select it. I hope that helps!

• Fuze freaked - out and fixed

  OK, it happened to me.

  My assumptions are: 1) the SanDisk 8 GB MicroSD card was a little problem. It's my first theory.

  (2) try something with the mode MTP and WMP for you all, I use ever, has left a few bad artifact

  (3) I got a bad file out there, even if everything has been implemented through mp3tag

  But it was a severe disorder.

  Turn on the unit and nothing in the artists or Albums except the letter V and the letter F, which each then listed as [empty].

  Tried several soft resets (down the power 30 seconds button) - same result.

  Released A card MicroSD - the same result.

  At home with the computer, connected Fuze with MicroSD card and saw that I could read the albums in the internal memory. Ran ChkDsk/verification of the errors to the case where. Disconnected, and albums were again properly.

  MicroSD inserted and update the database has frozen. Stop, removed MicroSD, the unit itself have behaved properly.

  Put the MicroSD card into a reader of cards for the computer. As a first step, it would not recognize it at all: "Please insert a card."   Finally, after having put the MicroSD card in the reader and the connection and disconnection of the drive, you have the map is displayed in my computer and ran ChkDsk/check the errors on this subject. (No message after checking).

  MicroSD in unity, refresh the database was still frozen.

  Card in the drive again, the computer wouldn't read. Looked in the Device Manager to see the that the computer (Ricoh) card reader driver was the yellow exclamation point. Uninstalled, run add new hardware, it reinstalled. Now, he reads the card.

  Has raced once again error checking, which took much longer and maxed out the CPU (running at 95 - 99 for 100 during nearly an hour). Still no messages after verification. MicroSD returned to rocket. Updating database still frozen.

  Time format. Memory and external being readable, I backed up the on an external drive. I deleted a Winamp .ini file and a file .xml for Windows on the map.

  The internal memory format, formatted card, return to music each - less the last five albums added to the MicroSD card. Everything works fine. Add the last five albums. And always smooth.

  Conclusion: something has happened on this map. Whether the parameters in these .xml and .ini files. or flash memory, exhaust, I don't know. But work methodically and formatting, fixed it.

  When the map includes the files it contains in MTP mode, try to have the card in MSC mode or in a card slot pc may not work. I did not understand files of the PSG on the FLEURIDAS card in a slot for pc not having card does not, but often impossible even to delete the files on the card or format the card in the pc until after that PSG files have disappeared. To do this, put the player in MTP mode, put the card in the reader, then you connect. Now the DPW files can be deleted. After that, the card will be recognized in a pc card slot.

• My computer has / had a hard drive of 250 GB in there, and after that I ran a full system back to factory settings restore it now appears as a 110 GB hard drive any idea why or how to fix this problem?

  My computer is running Windows Vista Home Premium Service Pack 2.

  I also checked in disk management and there are only two drive a C(110 GB) and D (15 GB) why so the other disappear from 125 GB and how to bring them back. This is something I have encountered when working with computers. Help, please!

  Thanks in advance.

  • What is the number and the model of the computer?

  Because you have restored to factory settings, you will need to contact the OEM (computer manufacturer) for assistance.

  Get in touch with them.

  Dell support

  HP support

  Acer support

  Lenovo support

  Support for Sony

  Toshiba support

• My HP3330 does not scan documents. Any suggestions on the problem and the fix? Thank you.

  He analysed since the new until about 2-3 months ago.  Then I started to receive a message each time I restarted that says "error HP LaserJet Director.  Unable to communicate with the device.  This unit is disconnected or posered off the coast. »

  I would check the HP forum

• can't see the video on youtube (can hear the sound) unless I have disable and then re-enableplugin before each video. Any suggestions what the problem is.

  have updated firefox. have uninstalled and reinstalled Flash Player. Adobe websit confirms it. After that playback of video installation the first but the following videos will not be inless I deactivate the plugin and then turn it back on.

  Three updates this week, one with Flash that came out Tuesday or Wednesday and two of Firefox, such as the sea and Fri.

  Try to install the previous version of Flash - Shockwave Flash 10.2 r102.

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I have Photoshop CS and when I tried to open it I got an activation screen that does not work.  I have used this product for years and want to continue.  I paid for him and all of a sudden I can't use it!  Please help me to get the program I pai

  I have Photoshop CS and when I tried to open it I got an activation screen that does not work.  How can I get my program works?

  Hello

  Activation for CS and CS2 products now unavailable server.

  In this case the best you can do is to install Photoshop CS2 at the bottom of the link with the serial number that is mentioned on the Web site

  Error: Unavailable activation server | CS2, Acrobat 7, pass a hearing 3