installation seems to have stopped

Similar Questions

• Satellite L755-11j - cooling fan seems to have stopped working

  Hello

  I have the model Satellite L755-11j and I'm really happy with it, strong, fast and reliable, I have only one problem: my cooling fan seems to have stopped working.

  I don't know if it's a hardware or software (BIOS is set to dynamic switch, and in the power management is set to 'Active') delivers, because I come from Croatia, diagnostic PC is incredibly overpriced here and I can replace the fan on my own.

  I want to just make sure I don't buy new cooling fan and my problem persists. Install speedfan and Toshiba PC health monitor only confirmed what I suspected, my laptop gets hot.

  I bought the external cooling fan to help keep the temperature of my laptop down, but with the coming of the summer that I really want to solve this problem.

  To be honest, it is not easy to help you with this. Is that cooling fan works automatically and there is not a special option where you can control. Only thing you can change is the cooling method option that you can find in the advanced power options > Toshiba power saver.

  Check it please what option is set to on. Of course on this virtual path, it is not easy to tell if the cooling fan is defective or not.
  It works or not? Can you notice hot air flow when you put your hand on the cooling grill placed on the left side of your laptop?

• The weather app seems to have stopped working. True?

  I have been using the weather app without problem until recently. Now the app seems to have stopped working. What is the problem and what going to be fixed?

  It works fine for me. He told me exactly how cold it is outside (where I have to go soon). Have what troubleshooting steps you taken?

• Dell XPS 12 Mini DisplayPort seems to have stopped working

  Hello

  My Mini DisplayPort seems to have stopped working. I can connect on the same monitor of the ultrabook even through the USB port. However, because I'm a geek of database I need up to 3 screens. So when I try and connect to my Mini DisplayPort monitor the screen resolution tab in the Control Panel recognizes the display. However, the actual display is empty. Mini DisplayPort has worked well for the last 8 months or so, but stopped working tonight.

  The external monitor is; -Samsung; SyncMaster 941BW/940BW\199BW, SyncMaster Magic CX915BW (Digital)

  Any help would be greatly appreciated.

  Kind regards

  Kieran.

  I replaced the cable and now it seems to work.

  Thank you

  Kieran.

• The Installer seems to have written the wrong ID of Application AUM

  I am currently working with indesign cs2 - I know it's a very old version, if I had the money to upgrade I would be so please don't suggest this as it is very helpful! I use a PC on windows 10. Everything has been great to work with no problems until this week, when I run the indesign application, I get the error message "the installer appears to have written the bad AUM ID of Application" and a screen empty - no toolbars or whatever it is, it is completely unusable. To my knowledge or memory I did not anything new or different, no new downloads/updates (unless there has been those auto). It worked well on Friday, and then when I came to use it again on Monday I get this.

  I tried the patches only that I could find

  -on the Add/Remove programs change is grey on for indesign, I can't click on it.

  -J' tried to delete the incorrect registry key, but I don't have one that matches what is indicated.

  Help, please! I rely heavily on this program.

  Try compatibility mode...

• Windows 7 Ultimate computer seems to have stopped, head HD not seeking chkdsk errors

  Last week, I look at a the news on Youtube.  Turned away from the computer, came back and heard a strange clicking noise.  I listened closer and could hear the hard drive heads look back.  It sounded as if the head arm was moving inside the trays and then swing to the outside several times.

  Click on the reset button and the computer would not start, error says no bootable disk found.  Turned off the computer, went to retrieve another new drive and create a bootable stick from my WHS server.  Come back I would try once more thought, and the started computer.  A ran Chkdsk with the option of scanning and repair bad sectors.  He found a no mistake.  A few days later the computer slowed to almost a complete stop, (non-response) error in the program I was using (Firefox).  A ran chkdsk once more on the C drive and found 24 index who needed compensation, but that it has been.

  It is an i7 2600K cpu @ 3.40 ghz 3.39 Ghz, 16 GB ram, and two 3.5 "HGST (Hitachi/Western Digital) drive 500 GB which is about 5 years old now.

  Even if Chkdsk reports no errors, I always suspect that the drive has failed.  As I looked at the scan of glomeruli that it suspended or 20 seconds in two places.  First to around 1100 groups then back to 14 000 clusters.

  I have a new Seagate drive custom quality company.  The chkdsk seems to mitigate the problems, but I know now that I'm running on a ragged edge and she will soon be a serious failure.

  I suspect it's the same story horror IBM-Hitachi again.  Readers are not mounted tight, there is a lot of space around them.  I don't think overheating is the problem.

  Your contribution is appreciated.

  Hi Donald,.

  Please answer these questions to better understand the issue.

  1. What is Windows 7 connected to Windows Home Server?
  2. Is the computer on the domain or server network?

  You can deal with this problem due to the hardware failure.  Looks like a bad impact on the hard drive. If it is under warranty, save and send it for repair. (If the computer is under warranty, send it - withdrawal of the drive will void the warranty.) If it is not under warranty, reinstall the drive (after saving).

  Make sure you do, save it before he gets defective.

  There are two hard disk problem physical and non-physical. If your hard drive sound like it, its may damage on your hard drive. First of all, you should be do is keep and back up your data and then remove those hard with the new drive. Do not use again this type of hard drive that will cause the problem in the future.

  Follow the steps in this Microsoft KB article and check if that helps:

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286/en-us

  Antivirus warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• XBR 850 seems to have stopped passing Dolby 5.1 via the optical output

  Never had a problem with thisin the past, have a SONOS speaker system hooked up via Optical Out, now it just seems to be in stereo.

  Well, I did a factory reset, and all is well now... amazing what has happened?

• I turned on iCloud to save my photos, but he seems to have stopped...

  About this MAC said I 87 GB of photos but only 1.47 GB was backup to the cloud of Apple?  I updated my plan 200 GB storage, but during the night looks only 1.47 GB has been saved in the cloud and it does not seem it still works.

  Why?

  Update.  It's not like he has saved 507 videos.  I am not able to save these videos that are in my photos?

• Thunderbird seems to have stopped the synchronization of files after the last Mac update

  However it says new, unread messages are available but obviously does not display them. If I try to send an email I get the error message "Failed to send the message.". I use Thunderbird on two different systems of Windows, and I'm not having this problem. Recent emails that have been synchronized spoke of a week ago which is the time I've done the update of the Mac system. I'm on a MAC OS X 10.9.5 using TBird 31.1.2 and I try to synchronize a Microsoft Exchange account, and I have ExQuilla 31.0.1135 the module installed. If anyone has an idea of what's going on here, I would like to help solve this.
  Thank you.

  See. https://support.Mozilla.org/en-us/KB/Thunderbird-cant-be-opened-after-you-install-it-Ma I wonder if the issues are related.

• Pavilion dv7: wireless adapter seems to have stopped working

  I had no problem with the laptop except yesterday wireless internet starting to detiorate - I thought he could have local internet (distance), but today he gave up altogether. Fortunately, I have with me and plugged ethernet cable from router to the laptop and it works perfectly.

  I also thought that it may have been a significant update of windows that came through yesterday so I reset the syetem of before the update day, but this has not fixed the problem.

  I have had a look in the Device Manager and have not found anything obvious, although my experience is limited

  I will not always have the luxury of a cable connection and would dearly like to have the ability to reuse wireless.

  Can you help me please

  Hello and thnaks for the help. I looked in Device Manager and found 27 wifi networks (I travel a lot), I removed all and reconnected and hey presto - its working again.

  I don't know if this solution will help others but for what its worth, it worked for me

  See you soon

• Office 365 applications seem to have stopped working...

  Hello

  I recently tried to wake up my Macbook Pro, and it has been frozen. I rebooted and found that whenever I launch a program of Office 365, it freezes again until I force quit the program. I tried to reinstall them does not. I'll try to uninstall them and reinstall to see if it works. Someone else had this problem recently?

  You can also ask a question in the Microsoft Office for Mac forum and indicate what version of Office you are using. Office 365 is the method of subscription of Microsoft licenses, but it does not indicate a specific version. Here is a link to Microsoft Office for Mac forum 2016: http://answers.microsoft.com/en-us/mac/forum/macoffice2016?auth=1

• Fingerprint reader seems to have stopped randomly working

  Happening from time to time. Where I would try to use the fingerprint reader, and nothing would happen. Now it just doesn't quite work.
  I try to open the program to fingerprint reader, but it says "unable to connect to the probe.
  Why do you think he has failed to connect to it and how do I get it to connect?

  To me it sounds like a hardware issue and I'm afraid single service can help you with this problem.

  Only way to be sure if it is a hardware problem is to install the OS by using Toshiba recovery image and see if the problem persists with the factory settings.

• My system restore function seems to have stopped working

  Whenever I try to use my system restore feature, it does not. Was going to fine a month ago.

  Hi AnthonyBurtenshaw,

  ·         You receive an error message?

  ·         Did you do changes on the computer before the show?

  I suggest you to follow the steps in the Microsoft Knowledge Base article mentioned below and check.

   

  The system restore service does not work in Windows XP

  http://support.Microsoft.com/kb/841568

  Let us know if that helps.

• Why I can't align the function work at all? He seems to have stopped working.

  Worth to try to align anything... images of text boxes... I hit a button Align to center an object or move to the right margin or left... and nothing. The objects remain stationary. This just happened tonight... worked fine up til now. Can not understand how to run again.

  Check the option "align to.

• Effects seems to have stopped working. However, I opened an older file with effects and it is still active.

  2nd thought, it is only the text. Maybe I need to do more research. I think I'm the problem.

  Check the stroke of the text block value, so don't not else 0 effects can be applied.

  Thank you

  Sanjit