Installation will not

Similar Questions

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• Sony PMB installer will not install

  I have a Sony VGN-FW275J... I'm trying to load the installer of PMB to a HDR-XR150. I tried over and over and over again and it will not be installed. He manages at the end of the installation each time, and then told me that he "... could not open key: unknown/components/DA (very long series of numbers, letters) check that you have sufficient access to that key or contact your support team."

  I'm the only one who uses my personal computer... period. Why it tells me I do not have a sufficient and safe especially... why in the world will not load software Sony Sony computer? It must be one of the stupidest things I ever experienced.

  Thank you for your post and welcome to the forum.

  Your description of the error appears to be a permissions issue - the installation tries to access a part of the system registry, but can not. After a reboot, try to run the installation in administrator mode - instead of double-click Setup, right click the icon and select "Run as Administrator" from the menu.

• Server 2008 R2 installation will not configure on DV7 series laptop

  I installed the Server 2008 R2 on a laptop DV7-7012nr. I upgraded the memory up to 16 GB. I deleted all the partitions, and then divide the hard drive into 2 partitions. Partition 1 is 7 442 Go Windows, Partition 2 is 256 GB server.

  When I install, windows server 2008, in dual boot, it will not complete the configuration for the material. This leaves me the choice either reinstall Windows server 2008 and to come back to the same error or return to windows 7.

  How can I get a dual boot for a full installation of Windows server 2008 R2 Enterprise Edition or Standard on my DV7-7012nr laptop?

  After spending 5 days with installing Server 2008 R2 64-bit on this laptop, I contacted the HP Support. Technical support HP and after 4 hours and 7 different technicians, I was informed that they can not help me with the installation of Server 2008 on this laptop. I know it's possible, and I installed Server 08 several times that I can remember. I'll have to this laptop with the conclusion that although HP says that it will work, it will not return.

  Summary; Windows Server 2008 R2 64-bit Standard or enterprise will not be installed on the HP Pavilion dv7-7012nr laptop.

• my windows installation will not be completed which is why my pc not started.what can I do?

  My a was restart again, once again, then I update my Windows xp with the cd... what cd copying files after removed my pc blocking at 59% of the files.then copy I switch off the pc after startup it is not working properly and always crashes after awhile as before... my installation of windows will not be not complete which is why my pc don't started.what can I do?

  Hello

  Do you have any other operating system installed on the computer?

  The CD/DVD that you use to install Windows XP may be damaged and this is a possible reason why you cannot complete the installation of Windows XP.

  You can check with another CD/DVD to install Windows XP. In the meantime, you can also check out this link that talks about the installation of Windows XP.

  Install Windows XP
  http://Windows.Microsoft.com/en-in/Windows-XP/help/Setup/install-Windows-XP

  You can also check out this link that talks about the hanging of Windows XP configuration.

  http://support.Microsoft.com/kb/828267

  It will be useful.

• Windows Installer will not work. I have Norton Antivirus, CCleaner, Securia, etc.. Some programs start more. I have Office 2002 and my processor will not open.

  After problems with my system slows down, I found Windows Installer, stop operation. I have Windows XP Home Edition, SP3. I have Office 2002 and my processor will not open. I tried to install install 4.5, but it wouldn't work.  I can't start in my Services, either, even if it is configured to start automatically. I don't know if I just need to migrate to Windows 7 and do with it or continue to try to solve this problem!

  My hard drive is failing and replaced with the new computer.

• Repair Windows installation will not continue beyond the mark of 26 min during fill the stage of installation

  Hi there all your PC gurus

  PC fails to complete a repair of Windows XP installation. It does not go beyond the mark of 26 min during the installation phase ends. You can still move the mouse around, however installation is not continue beyond this point.

  The 2 following errors are received:
  Error installing com +.
  "of the subcomponent com + threw an exception during the processing of the OC_complete_installation Setup message.
  d:/xpsp/com/com1x/src/complussetup/Comsetup/csetuputil.cpp (line 3429)
  Error code = 0x8000ffff
  Castastrophic failure
  Cannot run the function ' DllRegisterserverc)' in
  c:/Windows/System32/clbcatq.dll ".

  Corrupted file Unregmp2.exe
  The file or the directory c:/documents and settings by default/user/start menu/programs/windows Media.lnk is damaged and unreadable. Please run the chkdsk utility. »

  PC is a Dell Vostro 1510, it is only a couple of years.

  Can someone please?

  The initial problem was that the PC did not go beyond the page of Windows to start upward. So I had to do an installation of the Dell windows XP disk repair. But I couldn't boot from the CD, (even after changing in the system BIOS boot order) to work around this problem, so I had to disable the boot on the other upward options being - HDD, USB etc. so only if it start from the disc.

  After completing the first part of the repair facility, the PC restarted to complete the second part of the installation, however I got an error message "the Kernel32.dll file is possibly corrupt. The header checksum does not match the checksum calculated.

  After some research, I solved this problem by using the windows recovery console to extract a new copy of the kernel32.dll from the windows XP disc. It seemed to work. The second part of the window repair facility restarted successfully, but now the problem is it will not complete installation, it gets stuck/not will not go beyond the 26 minute mark during the phase of "complete installation."

  It has been full of hiccups. I'm not a person of computer tech at all, but have managed to get so far at this stage.  Can someone please please help, very much appreciated.
  Thanks :)

  Hello

  Follow the steps from the link: you receive the error message "UNREGMP2." EXE - Entry Point not found"when you upgrade or repair Windows XP: http://support.microsoft.com/kb/889288

  You can also try the steps from the link which is very useful for troubleshooting Windows XP startup problems:

  How do I recover from a corrupted registry that prevents http://support.microsoft.com/kb/307545 of Windows XP startup

• CD/dvd drive and windows update/installer will not work

  Because I'm not on the computer, I am referring to I should be as concise and precise as possible here. The system is Windows Vista service pack 2.

  I'm trying to re format the computer of a friend. Something I've done often in the past. I did two recovery disks when the computer was new, but cannot do recognize the cd/dvd or any other, internal or external drive that I tried. error code 39 is cited in all cases.

  In addition, he said there are three updates to install when I boot on the system to start before these updates are installed only. In fact the windows installer has stopped working. I went into Device Manager and not only it shows conflicts for hard drives, but for multiple NICs also: twelve 6-4 adapters and five ISATAP adapters also Microsoft. I've uninstalled and restarted for all adapters reinstall with the same conflicts. In addition the machine will not be closed correctly in normal mode and I get a blue screen with a message of memory dump. I'm afraid to format the c drive, until I have a way to reinstall the system via a disk drive. Can someone help me please?

  I tried it in safe mode and it stops at least normally but as soon as I restart with networking all the problems are back.

  Hello

  I also suggest you go through the steps in the article and check if that helps.

  Hope that the information was helpful and let us know if you need more assistance. We will be happy to help you.

• Windows VISTA BIT missing Modules! Updates to the installer will not work.

  MY windows progam (and several other installation programs) will not work.  I went down to the BITS service does not.  I found several remedies that include restarting or re-configuration of the service.  However, when I try to start to change the service in the Control Panel, I get a message that the modules of BITS are not!  Can my BITS have been removed?

  Note: I had my living room PC to eliminate an infection particularly bad virud - perhaps they removed too?

  Pavillian Mediacenter HP with Windows Vista Edition Home Premium (x 32)

  Thank you, DRC

  Hi DCassie,

  1. Have you tried the 940520 full KB?

  If you have not completed the Ko 940520 try the full article and check if it works.

  If the article does not help then to recover a corrupt service, you will need to perform the repair installation of Windows vista and the Windows vista disc, you cannot perform repair installation.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Upgrade installation will not work after replaced hard drive

  Have a HP machine that came with Vista. Bought an upgrade to Windows 7. Ran fine for several months. Then the hard drive failed. Installed a new hard drive. Partitioned and formatted. Windows 7 upgrade will not install. The only copy of Vista was on the hard drive crashed. A way to force the update to install. I have the license keys and the legal copies - simply nothing to install the first. Any help would be great.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• Photosmart C41 installer will not work

  The netwoed has an existing C41 all-in-one printer.

  Adding a new PC - Windows 7 and reconfigurinbg another XP, downloaded drivers will not install.

  This happens even with a startup mode without failure, or a boot, the sequence of the expansion, but when the dialog box closes, that's all.

  There is no inatallatiion subsequebt dialog box.

  The temporary folder and unning extends the "mnually" file it seems to start and a process can be seen in the Task Manager, but nothing else happens!

  Win 7 PC is brand-new, apart files impiorting of its predecessor (transfer Assistant), it had not been used before attempting to install the Photosmart C41 all-in-one printer/scanner drivers.

  Any ideas?

  BTW, Ive also tried the 'Lite' version package - same result...

  See you soon,.

  Ron

  Hi Ron,

  Can refer you to the HP Photosmart C410 model?

  Try following the steps below and check if this solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  If it persists, please open the Device Manager and spend section of processors. What CPU you have on your PC?

  Kind regards
  Shlomi

• Creative cloud installer will not work!

  I recently bought the student £15 / month creative cloud deal so I can especially filming to editing and creative cloud Setup will not work.

  It opens with a window saying 'double click to install' what I'm doing and I'm going through the steps, but only at the end, he goes back to the start and does nothing! It won't let me download "after effects" which I desperately need.

  Quick notes: I have a mac, which is only a few months old.

  And I tried to delete all previous Adobe files and start from scratch, but it won't let me say they are running. These files are plugins. Help, please!

  uninstall all cc (if nothing is installed).

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Restart the cc desktop application installation, https://creative.adobe.com/products/creative-cloud

  If this fails, you can install ae directly (without the soft of cc).

  If you follow the 7 steps you can download directly here: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• I am trying to download 13 elements EP on my laptop Lenovo running Windows 8.1 but get a messagi as the file to archive is missing and that the installation will not go further.

  I am trying to download Photoshop elements 13 but after apparently downloading, I get a message that a file of archive is missing and the download will not progress any further. I use a portable Levovo running Windows 8.1

  you need corresponding 7z, too - not just the exe file.  put them both in the same directory and double-click on the exe file

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Adobe cs 5.5 installation will not take my adobe password

  I just updated the PC to a newer version of windows and reformatted. I have uninstall adobe first (or what you call). But now he will not re register, he does not accept the password even if it works on the Web site. I have NO intention of upgrading since I do not use the PC enough to be worth it. How do I register it?

  There is no password required for installation of the adobe cs 5.5 on a windows computer programs.  during the installation you will be prompted for your serial number, but nothing else is required to install and activate.

• Windows Vista 32-bit Windows Installer will not work. "Windows Installer are not available"

  I've seen other answers for it but when I go to my list of services. Windows Installer does not appear on the list of Services. Does anyone know how to fix this?

  I've seen other answers for it but when I go to my list of services. Windows Installer does not appear on the list of Services. Does anyone know how to fix this?

  extracted from:

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

  Difficulty in registration of Windows Installer

  If the steps above do not help, or if the Windows Installer service is not listed in the Services applet, follow these steps:

  1. Download msiserver.zip and save it to the desktop.
  2. Unzip the file and extract the msiserver.reg on the desktop.
  3. Right click on msiserver.reg and choose Merge.
  4. Click Yes when asked for confirmation.
  5. Restart Windows.

  Here is a tutorial from Microsoft Support. Have you tried this one?

  http://support.Microsoft.com/kb/2642495#top

• Palm Desktop CC installer will not work

  Mac OS 10.10.5 Yosemite

  In trying to install CC trials, I downloaded the installer dmg CC, but whenever I try to run the installation program fails. After you double click the installation icon, a window appears which says: "Initializing Installer." Shortly after, another window opens which says: "TΘlΘcharge Creative Cloud Desktop". The progress bar moves for a moment, and then the window disappears with no error message and nothing downloaded.

  I downloaded Adobe several files without problems until this. I scoured the pages of Adobe support for installation issues, but they have all the problems with CC apps installation and not install the CC itself desktop application. I have run the CC cleaning tool to search all stray CC files, but it shows no (as I suspected - who ever installed some). I installed the latest version of Adobe Application Manager without difficulty just to see if there were any questions here, but the problem persists.

  Thanks for any help.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html