installation 'Windows Media 9 Series' visualizations

Similar Questions

• Windows Media 9 Series encoder

  Downloaded windows media encoder 9 series on the ms site

  When you try to live it will not pick up the broadcast ip address.

  Look at me because am different, I laugh at coz you your all the same

  Maybe this article will help you.  It seems as if implementation is a bit complicated, especially if you use a router - but it provides some good detailed information that might help your solve the installation problem (that's what I suspect rather than a problem with the {then the correct configuration of others} software or internet connection router or Vista. http://www.jakeludington.com/ask_jake/20051015_how_to_stream_a_live_audio_file.html.

  I hope this helps.

  Good lucck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installation window Media Center with Avermedia A850 DMB-TH/DVB-T

  Hi all

  I am located in Australia and I have a USB TV tuner which can be used for DVB - T or DMB - TH digital system. I tested it on the player of AverMedia TV tuner, which worked well and I can't all channels using an antenna from the wall outlet. However, it doesn't seem to work when I went to the Media Center window with the same exact configuration (taking wall antenna).

  I tried to use it on Windows Vista and 7, which gave me very different results.

  --------------------------

  Vista: When I click on "Setup TV signal" it recognizes the signal as "Antenna", but he was not able to scan any guide or service.

  --------------------------

  7: Interestingly, it recognizes the USB TV Tuner, but to halfway through the installer it says 'You are about to leave the media center window to start the installation process for Tuner AVerMedia digital (DMB - TH)' and the rest of the facility would be in Chinese, where he asks me which City Chinese I am etc. and cause recognized as a bad country and DMB - TH no channels are available.

  --------------------------

  Could I please get a setting for help to the top of the window Media Center?

  Initially, I thought it was a problem with the driver, but it seems not to be because she works for the Avermedia program.

  Thanks for your help!

  Hello

  Thank you for you answer.

  I have already contacted Avermedia and they got back to me with a solution. However, they notified the problem with the interface in Chinese was the software design of the library window.

  Also, I think that DMB - TH is just how Windows Media Center recognized as, because it is a hybrid TV tuner so when I click on the driver he recognizes as DMB-TH/DVB-T so its fine.

  In any case, he now works correctly. It's a hybrid tuner, they asked me to install a program that allows me to switch between DVB - T and DMB - TH. So far it works well :)

  Thanks for your help.

• Windows Media Center/Player visualizations

  Last year there was a fireplace in the visualizations, which was nice for Christmas carols. This year I can't. Where could I find it?

  It is probably the Yule log visualization: http://channel9.msdn.com/Blogs/coolstuff/Get-the-Windows-Media-Player-Yule-Log-Visualization-for-Vista .

  Tim Baets
  http://www.BM-productions.TK

• Full screen is black when you use windows media player series Equium

  Hello.

  When I watch TV on the windows media player so I have the problem. If I go to full screen, it's all black screen but I can hear sounds.
  Watch DVD is OK.

  I have my laptop for 4 months, but everything was ok.
  This problem started 2 days ago maybe earlier. I think I did something but I don't know what and I can't fix it.

  I did restore the BONE, but it did not help.

  Could you help me please?

  Thank you

  Hello

  I know this problem, it s just a bug with media player and the graphics drivers (mainly the media player causes the error it s). Please, if you want to watch something on TV and then playback must be STOPPED BEFORE you from the screen. Once you have changed the screen, enable playback and it should work.

  Otherwise, go on www.videolan.org website, download the latest version of VLC Player and do it with him, it should work for sure. I never start playback of a movie or something when the screen not changed front on television that the screen alone.

  Welcome them

• Windows Media Player series compatibility with Easy CD Creator 4

  I need to get the series of Windows player on my desktop that is Compatible with the Easy Cd Creator 4 ME. I think that's probably the WMP 7 for Windows (ME) series. Can someone please provide the procedure to achieve the above objective. For now I have WMP 9 Series on my desk ME and I can't burn CDs of using Easy CD Creator 4.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx

  Above is a list of Discussion groups, many of which have been abandoned.

  You will need to seek advice where Google for your information.

  That's all the advice I can give you.

  See you soon.

  Mick Murphy - Microsoft partner

• Internet to my windows media center tv did not work after that I just watched several shows on that and then all of a sudden it says no supported region or country.

  my location is currently set to United States English. Fix it or im not to buy another computer with windows again and im taking this one back thanks fix

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

• I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again

• Problems with reorded/live TV in Windows Media Center/player

  Having recently updated the drivers for my graphics (Nvidea GeForce GTX 460 SE) Windows Media Player/Center refuses to show any video image during an attempt to play live TV or TV recorded previously. I only get audio.
  My drivers are up to date and the only thing I can think that I've changed has been updated my graphic drivers. This is television shows that were working before.
  I have been using a third-party program to play these in the meantime, but obviously it is not compatible with my remote windows.
  Any suggestions?

  If it all started after updating the graphics driver, you can easily restore the driver.

  Try to card tv tuner driver update. Visit the tv tuner card manufacturer's Web site to download and install the latest version of the driver.

  Another thing, you could try resets WMC: -.

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

  I would also suggest you to uninstall any third-party application you are using at the moment.

  See also: -.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

• Cannot find where to manually add TV stations in Windows Media Center

  Hello

  I use Windows Media Center with Windows 7 to watch live tv with a tv tuner. It works fine except there is a television station that I know is broadcast here that there's no signal with an auto-tune. I want to manually add this channel, but all the instructions about how to manually add channels are older versions of windows and I can't find where I manually add channels in WMC in Win7. Is someone can you please tell me how I do?

  Thank you.

  According to the Guide will be: -.

  Edit channels

  Add missing channels

  Edit favorite queues

  Guide Page Options

  Get the latest announcements of Guide

  Guide terms of Service

  The Guide lists

  I will suggest you to re-run the whole upward.

  Under tasks > settings > General > installation Windows Media Center > rerun the installation.

  S.Sengupta Media Center MVP

• Audio stuttering then crash by watching the video with Windows Media center

  I'm having a problem with Windows Media Center which seems to have left me speechless. Whenever I have try and watch live TV or recorded using Media Center program, he starts to play to repeat the first second of audio for about 6 seconds and then stops playing gives me an video error and won't let watch me something else. I have a Setup Xbox 360 as an Extender and having no problem whatsoever. The strange thing is that, if I open the program saved directly from Explorer windows with media center, it will play well. If I stop and try and then click RESUME He stutters and gives me this video error.
  It used to work fine until I started to play with the audio settings from 5.1 to 7.1 audio in the windows configuration settings. I changed the settings in-game your 7.1 speakers. Actually I tried to switch back, but when I try to 'Test' the speakers it gives a sound like it is stuttering and I still get the video error when I try to play. Any help would be greatly appreciated.

  I'm having a problem with Windows Media Center which seems to have left me speechless. Whenever I have try and watch live TV or recorded using Media Center program, he starts to play to repeat the first second of audio for about 6 seconds and then stops playing gives me an video error and won't let watch me something else. I have a Setup Xbox 360 as an Extender and having no problem whatsoever. The strange thing is that, if I open the program saved directly from Explorer windows with media center, it will play well. If I stop and try and then click RESUME He stutters and gives me this video error.
  It used to work fine until I started to play with the audio settings from 5.1 to 7.1 audio in the windows configuration settings. I changed the settings in-game your 7.1 speakers. Actually I tried to switch back, but when I try to 'Test' the speakers it gives a sound like it is stuttering and I still get the video error when I try to play. Any help would be greatly appreciated.

  Audio problems in Windows Media Center

  update the following drivers: -.

  Audio driver

  Graphics card driver

  Driver card TV Tuner

  You may need to reset if necessary WMC.

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

  You can also go for a System Restore-select any restore point when it did not have this problem.

• Window Media Center, error code:-2146959355, could not record show. Live TV does not work. Help?

  Hello

  I'm having a problem with my Windows Media Center. It worked perfectly without any problem since I built the computer more than 6 months ago. I have not changed anything, the only thing I've done recently is set up a homegroup on my local network using this computer. Except that nothing has changed.
  A show is set to record every time, I get the error code. Also, I can't watch live TV. Help, please!
  Thank you.

  Check the event viewer.
  http://Windows.Microsoft.com/en-in/Windows-Vista/open-Event-Viewer

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

• my version of windows media center is not looking for movies or internet tv

  I have windows media center, but am not sure what version. I am running windows 7 64 bit edition Home premium. in media center, I see the movies tab, but not the search option. I see the TV tab, but not an internet TV option or tab, which can do?

  Where are you located?

  Internet TV is available only in the United States and the United Kingdom.

  If you are located in any of the countries mentioned above, then try to run Setup again: -.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

• my Windows Media Center does not run wll

  When media center is running it start & stop starts & stops on its on!

  Suggestions: -.

  1] you can opt for a system restore. Select any restore point when everything was working fine.

  If the above does not help: -.

  2] run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again

• Update security for Windows Media Encoder 9 Series for Windows Vista... Error details: Code 6B9__

  I tried several times to install the security update for Windows Media Encoder 9 Series for Windows Vista. It downloaded, but everytime I try to install it about half way through the installation it is said that it was cancelled and I got 6 b 9 error Code.  I can download and install other updates without any problem.

  Hi Ms. Morrill,

  Welcome to Microsoft Windows Vista Forums.

  You can use the tool it Fix to reset Windows Update components using the link below:

  http://support.Microsoft.com/kb/971058/en-us

  After this step, try to install the update and if you get an error and then try to install mode safe

  To enter in safe mode follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the click the button Start the arrow next to the button lock , and then restart.

  2. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  For more information follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can try to install the update mode without failure and the link is the following:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=99beebc4-553a-46f8-8245-e3d932306c93&displaylang=en

  Hope this information is useful.

  Suresh G

  Support Microsoft Answers

  Visit our Microsoft answers feedback Forum and let us know what you think.