Installation with .iso

Similar Questions

• Mac keyboard is not in line with ISO standards

  Mac keyboard is not consistent with ISO standards.

  I don't understand logic of apple by challenging the ISO standards.

  Ergonomically the Mac keyboard is a disaster. OK, I change the keyboard, but keyboard Apple has nothing to do with the ISO standards. I write with 10 fingers without looking at the keyboard and things are really hard for me.

  I don't know how to solve this problem, but I really wonder the logic behind this.

  You can send feedback to Apple here http://www.apple.com/feedback/

  Have you considered buying a new keyboard that meets your needs better?

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• Blue Snowball microphone installation with adobe first elements

  Blue Snowball microphone installation with adobe elements first problem - acts as the mute

  Hi William,.

  1 - is the mic function in other Audio capture programs?

  You can try to adjust the microphone as default and check if the problem persists.

  a. right click on the volume icon in the tray and then click "recording devices".

  b. make a right click on the empty spot in the window pop up, and select "Show disabled devices" and "show disconnected devices".

  c. right click on Microphone and then click 'enable '.

  d. highlight the microphone, then choose "Set as Default Device".

  e. click apply and then click ok.

  Hope this information is useful.

• I have 2 failure windows 7 installs with 35 GB of hard drive space, but I find no windows.old file?

  I have 2 failure windows 7 installs with 35 GB of hard drive space. but I find no windows.old file?

  The first installation failed because I had a copy of counterfeit Windows 7.

  I bought another copy and installed. Then, I got a horrible virus/worm that disabled all .exe files and the fix was just beyond me!

  I installed again but did not know that the previous facility where still there.

  I tried to clean the disc, but I don't me "from previous versions of windows" to clean.

  I find no windows.old file. (Enabled hidden files)

  Only I have a disc ssd 60gig and want the missing 35gig kindly returned to use.

  Can someone help?

  Check the system restore to see how much disk space it uses:

  Click Start

  Right click on computer

  Click on properties

  Click on advanced system settings

  Click on the System Protection

  Click on configure

  Adjust the amount of disk space allocated to system restore.

  In addition, the amount of RAM you have installed, it will take more disk space for paging, hibernation, and dump files.

• I used by mistake an MSDN installation with a regular windows key disk 7.

  I used by mistake a MSDN disc with a regular key of windows 7.  I then installed a lot of things.  Now, she's back with cannot activate siimilar due to not find a DNS server or something.  Is there a way to solve this problem with a normal installation disc and not lose all the work that went into my computer's configuration?  I now have a regular installation with two legitimate keys disc.

  Thank you

  Craig

  Which edition is on the sticker on the Dell? If the Windows 7 Professional, follow these steps:

  You can also try the following:

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  -----------------------

  Please note that using a KMS license, which requires that never where you install, there must be an Enterprise edition eligible installed Windows 7 (Windows XP Professional, Vista professional/Ultimate Edition or Windows 7 Professional/Ultimate Edition).

• The appliction accepts off frequently after update on Ipad3 with ISO 10 system.

  The appliction accepts off frequently after update on Ipad3 with ISO 10 system.

  Hi ayuba75781399,

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the frequent accidents that you have experienced.

  Please try it and let us know if it works for you.

  We apologize for the inconvenience.

• I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat to a fe

  I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat a few weeks before the software did not react more. After this time all pdf files can be manually opened with Adobe Reader, but not with Acrobat. Because Acrobat seems to be the default program to open pdf files, nothig happens if I double click on a pdf file, or if a pdf file to be generated from a site Web etc. At the beginning, I was able to reinstall Acrobat from the CD and it would work for a few weeks yet. This has been the case for the past three years. Now, even the resettlement option no longer works and the error message "Is not a real product from Adobe" is displayed during installation. As I said, all the other parts (Illustrator, Photoshop...) work fine and I don't have a product code, serial number etc. What could be the problem and how can I solve this problem? When I uninstall Acrobat, all PDFs open automatically via the Adobe Reader software. But I need more than just to read a PDF file. Help, please!

  Hi Andreas,

  Try the fix mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html

  Kind regards
  Rave

• Error occurred starting the installation with the error code '132'

  Error occurred starting the installation with the error code '132'

  Hello

  We will be happy to help you, but before that we need additional information:

  Which Adobe product you are trying to install?

  What operating system you are using the version?

  Until then we can see the links below:

  Impossible to install the illustrator of the creative cloud

  132 CC Illustrator installation error

  All adobe products install correctly EXCEPT illustrator... "Error".

• LR - CC does not work after installation with creative cloud. I run a W7 64-bit system

  Hello

  LR - CC does not work after installation with creative cloud. I run a W7 64-bit system.

  I got LR 5.7 running and is not installed by the CC.

  What to do

  Thank you.

  Hi Ridder,

  Please visit the solutions proposed in the following article.

  Lightroom does not launch or closes automatically after the splash screen

  I hope this helps.

  Kind regards

  Sumit Singh

• INS-06003: failure of connectivity SSH without password for installation with the following

  Dear all,
  
  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run
  
  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".
  
  I get the date and the hostname without error on both nodes.
  
  But during the installation of the grid, I get this error message:
  
  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]
  
  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?
  
  I also get this information in the Setup log:
  
  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused
  
  Kindly help on that.
  
  Kind regards
  Imran

  misterimran wrote:
  Dear all,

  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run

  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".

  I get the date and the hostname without error on both nodes.

  But during the installation of the grid, I get this error message:

  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

  I also get this information in the Setup log:

  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

  Kindly help on that.

  Kind regards
  Imran

  You can have the file/etc/ssh/ssh_config, where the default port is set at 22. Replace with 7547 and try ssh racnode1 "date; hostname". If it works, then it contains the definition, you may need to perform.

  Kind regards
  Julien

• Get the installation with a product key files.

  I am trying to transfer my copy of windows 7 from one PC to another, but I don't have my installation CD anymore. I used the MagicalJellyBean keyfinder to get my license key, but when I go to http://www.microsoft.com/en-us/software-recovery to get the .iso file, it gives me an error saying:

  "Error".

  We had a problem with the request for approval.  "Please ensure that your product key is a product supported by this site and has been entered correctly, and then try your request again.

  I had a friend also try with a key he knew must be valid (never used), and he had the same error, if someone could provide insight as to why he does this?

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• Need help Reparing via USB/burned disc with ISO

  I need help, repair corrupted on my computer files.  I'll explain what are the errors I get and what I have done to try to fix.  Because I feel I have tried everything, I'm thinking to update or repair via a USB port or the drive with an ISO will solve the problem.

  Apparently, everything was going well on my computer until I updated to Windows 8.1.  After I updated, integrated into my laptop keyboard no longer works as well as many other problems of pilot.  I wrote chalk this up to compatibility problems and decided to contact Microsoft Live Help.  Unfortunately, the Microsoft representative could not solve the problem after checking my computer remotely.  They recommended that contact Acer (the manufacturer of my computer).
  After another Office remote access with Acer, they were also able to help me and led me to believe that my computer had been hijacked.  Because the way my computer working fine before the update, I refused the very persistent representative, encouraging me to spend $ 500 to the UN-hijack and install security software, which I already ran.
  1. If my first attempt to solve the problem has been completely re - install Windows 8.  I have reset the factory settings and deleted all the files associated with my computer.  This problem resolved most of the issues I had, including the broken keyboard.  Then I noticed that I was getting errors with Windows Smart Screen Filter and a quick search on this question led me to a few other suggestions.
  2 administrator: command prompt
  sfc/scannow
                               Full check of 53%. Windows resource protection found corrupt files but was unable to solve some of them. Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. Note that logging is not currently supported in offline maintenance scenarios.
  When I tried to open log, "access denied."
  3. I tried using auto repair in the Advanced Boot Options.  Yet once, automatic repair couldn't fix my PC.  I was able to open the log file for this and noted that all of the tests completed successfully, however.
  4. I searched in the Panel > troubleshooting but did not find anything of note.

  5 I also looked a little system information by typing msinfo32 in the command prompt.  Under software environment and looking at the system drivers revealed that about half of them have stopped as the State.

  Objective: At the end of the day, I want to correct all the corrupt system files update to Windows 8.1.  In light of my last experience, I hesitate to do so since he almost broke my computer the last time I did.

  Any help or insight is greatly appreciated.

  Other info: I bought this laptop earlier this year with 8 pre-installed Windows.

  Hello

  ·         You have the Acer recovery disk?

  ·         You have the product key Windows 8?

  ·         What is the brand and model of the Acer?

  Note: I highly recommend back up all your important files and folders on an external storage device before performing any type of repair operating system or upgrade.

  Given that Windows 8 has been pre-installed on your Acer computer. I suggest you to use Acer recovery disk to restore PC to factory settings. For more information, consult the phone manual or contact Acer technical support.

  If you must reinstall Windows 8 or you want to install it on one partition and you do not have installation media, you can create it using the installer of Windows 8. To create a support, that you must use a PC running Windows 8.1, Windows 8, or Windows 7, and it must have the same architecture (32 or 64-bit) that you want to install Windows 8 on PC. You will also need your product key of Windows 8.

  Note: If you do not have a product key for Windows 8, you cannot create the installation media. You cannot use a product key of Windows 8 for this.

   

  Create an installation media for Windows 8

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Cannot connect to Windows Server Core after installation with VMWorkstation

  Yes, I chose not to add the ISO image later and now, I ran the installation a dozen times in all directions.

  Whenever the installation finishes I'm not given the option to enter a password instead, I am presented with an 'Other' account with a password set on it already which is unknown to me.

  Does anyone have this problem before?

  the5thace wrote: whenever the finishing of the installation I am not given the option to enter a password instead, I am presented with an 'Other' account with a password set on it already which is unknown to me.

  Well, when you make a Windows Server 2008 Standard (Server Core Installation) it seems to be quite normal to the «Different user» login  What I did after clicking on 'Another user' I typed in Administrator and no password and then clicked on the round right arrow button on the screen, the next screen has warned "the password must be changed before logging on the first time." and then click OK.  In the next screen, I entered the password and confirm the new password as was then able to connect.