Installations of updates of Windows problems solved

Similar Questions

• My system installs the updates of windows, whenever I stop

  My system installs the updates of windows, whenever I stop.  What should I do to prevent this?

  See: http://support.microsoft.com/kb/910339 . All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• I'm having a problem with the installation of update for Windows Vista (KB973768) security, error code 80073715's anyoe can help me?

  After getting my laptop to factory State, I ran the update of the window and got stuck to the update of security for Windows Vista (KB973768). The error code is 80073715. The update does not always settle anything I tried (reboot, download directly from the website of window, run the diagnostic window and solve problems). If anyone can help me, I really appreciate it.

  ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT 80073715

  The identity of the manifests are identical, but their content is different

  In a Word, there is a problem with component maintenance (EC).

  The information stored on the content of the file does not match what is present in Windows\winsxs.

  Try another attempt to update. If/when it breaks down, thanks for posting the * last * 50 or if WindowsUpdate.log lines in your answer:

  How to read the Windowsupdate.log file

  http://support.Microsoft.com/kb/902093

  In addition, please include the edition of Windows and the Service Pack level of operating system-

  For Vista \Win7, * right * click the computer on the desktop or the Start Menu, and then select Properties. The information is under "Windows edition".

  04/09 / 1107:46: 58 pm

• Installation of updates of Windows 8: failure! Error: 800F082F

  Just re-installed my windows 8.0 and I wanted to install all of the updates. Have 87 updates for me, selected them and clicked on install.

  Waited until they have finished downloading, then I saw that windows only 3 updates installed, windows remains the rolls as failed with error 800F082F

  Have you done with the updates, I never had this problem, and I have re-installed windows 8.0 and applied repeatedly its updates.

  If you say that I can safely uncheck these updates that talk to you, just install the rest, then reboot and install those, like the latest updates?

  Yes

  Its ok to install everything first? Or is not serious?

  KB2877213 - very specific to a set of conditions related to the KB2822241

  http://support.Microsoft.com/kb/2877213

  As long as you did not have this mentioned scenario then the installation of the latest update would be preferable.

  KB2891804 - FTP resolves issues: http://support.microsoft.com/kb/2891804

  Changed once again is very good for a new installation of Windows 8

  KB2904266:-solves the problems of time zone: http://support.microsoft.com/KB/2904266

  This update cancels and replaces the update described in knowledge Microsoft (KB) 2863058 Base article, which was published in August 2013. All additional time zone changes released patch after patch 2863058 is out are included in this update.

  Note: If you have already installed KB2863058 so this update should be last.

  KB 2772501 - shouldn't matter when it is installed

  KB 2871690 - this update isn't necessary: http://support.microsoft.com/kb/2871690

  J W Stuart: http://www.pagestart.com

• Installation of updates for Windows Vista error 80070490 message code

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Hey grown-sexy

  see if the below microsoft information arranges

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  If he did not correct it repost in the correct windows update forum below

  It comes to the installation of vista operating system instance

  Use the link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• installation of updates from windows to windows 7 after 10/25/10 makes me lose all access to the internet (wireless and others)

  I have r530i samsung that is less than 8 weeks, after that 1 week, a new set of windows udates appeared which caused my Internet to lose. I spoke to my internet provider, between us, we confirmed there was nothing wrong with the connection or otherwise (I was able to access the internet from another PC using the same provider and user name) it was suggesteed downloads had done something for my wirless modem.

  I did a complete system restore and it worked just fine.

  a few weeks later, the same problem occurred after some updates of windows. Unfortunately the fault can be diagnosed because I can't access the internet? I did a full recharge of the system of 23/10/10, this has worked fine, windows then downloaded updates and my internet access has failed once again so I have disabled the automatic updates and everything seems fine.

  all connections work well, I can still see the home hub it won't let me access the help please

  Hello

  There are various reasons for internet connection doesn't work after installing the update of windows on the computer.

  First of all, I would say that you check the update is causing the problem.

  To see the updates are installed on your computer

   

  (a) open the updates installed by clicking the Start button, click Control Panel, clicking programs, and then r undeprograms and features, click view installed updates.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

  http://www.Microsoft.com/downloads/en/default.aspx

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automatic update of Windows problems!

  I ran the auto update 12/09/09 16:00 OK. When I got to initialize at 20:00, I could go to my office and all the icons were there, but I couldn't access anything whatsoever. I went into safe mode and tried to restore to before the update and also around a week ago. Now, when I boot on the desktop is empty with just my screensaver. I went back into safe mode so that I can access the internet. Anyope knows how can I fix? I'm quite angry ' cos it worked fine and I don't have a lot of time on this issue or want to pay someone to do it! Help, please.

  Hi hb813,

  Welcome to the Microsoft Answers community.

  a. updates have been installed in your computer?

  Steps to check the update history:

  1. Click Start and select Control Panel.
  2. Select Windows Update.
  3. click view update history.

  Also, look for error messages in the observer of events and post back error messages exactly so that I can help you better.

  Measures to check the application event log:

  1. click on start.

  2. in the search box type eventvwr.msc, and then on enter.

  3. now, click Application in the event viewer (local).

  4. now locate the event log on the right side of the event viewer window.

  For more information visit:

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You try to install the update to windows in clean boot mode. This problem may be due to software conflicts, running in normal mode.

  Steps to clean boot mode:

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, update your computer.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Reg: Installation of updates on Windows 7

  My computer got off when I was checking updates on windows 10 and restart I did a windows 10 downgrade to windows 7, then my PC shows to reboot the computer, as the updates are being installed. I restarted many times but still the message is wrong. Now that I am unable to get the updates of windows 7. Help, please. Two technical people (Jefrerry and Prasanth) have worked on the same a few days back by connecting my PC remotely, but of no use, the problem persists.

  I have the ticket number: 1341715266

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the issue on Windows updates.

  I will definitely help you with this.

  I suggest you go through the below methods:

  Method 1: Try to run the troubleshooter Windows updates:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• recently impossible to implement the automatic installation of updates for Windows 7

  * Back in July 2015, I was able to get updates for my computer which uses Windows 7 Home Premium.

  * In July 2015, in the center of the Action, that's what he said:

  Windows Update                                                                                            On

  Windows automatically installs updates as soon as they are available.

  * Today, January 15, 2016, I thought that I would see if there was the necessary updates as I had not seen any activity since July. In the center of maintenance that the formulation has changed, it is said now
  Currently unguarded Windows Update
            Enable messages on Windows Update
  * When I click 'Activate messages on Windows Update', a box appears at the top:
  Windows Update was disabled by your system administrator.
               Turn off the messages on Windows Update
  * When I click on turn off messages on Windows Update. the box at the top goes.
  * I tried all afternoon know where to go to find the place where the system administrator (that's me) disabled the update of Windows, so I can enable / turn on.  NOTE: I don't know until it on computers knowingly do something like that.  I removed some Trojan virus in the past.

  Any suggestions on what I need to do to get "Windows install updates as soon as they become available" again?   Thanks for your help :)

  
  

  See if this helps: https://www.youtube.com/watch?v=mY7DgcJ0v3I

  J W Stuart: http://www.pagestart.com

• How can I activate the installation "hide update" in Windows/Microsoft update

  Last week I was constantly asked to install an update for Windows XP SP3 (security for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241).) It was first installed in October 2010. I installed it 8 times since March 2, but continue to receive reminders. The ability to hide updates is absent from Windows/Microsoft update. How can I fix.

  I am happy to learn that they are all present.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Tip: you can print the following instructions for consultation offline.

  ACTIONS

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/946414 [ignore the title & symptoms].

  1B. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [1]

  2. restart, then IMMEDIATELY...

  3. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan.

  => In the category of updates software optional on the left side of the scan results window, uncheck the KB2418241 & hide ("don't show me this update").

  -Online if an update of root certificates is listed under the category of updates software optional , install it to enjoy greater security of IE8.

  -Online Tip: with the exception of updates for MS Office, do NOT install any other updates software optional , or optional hardware updates. just hide them, too.

  Now, return to the main result window & install other updates listed (if any); Follow all the instructions.

  4. in response to this post with a status report.

  =======================================================
  [1] full Disclosure: the difficulty operating in aggressive mode will remove your update history (to the Windows Update Web site) but not list the updates installed in Add/Remove programs.

  [Last updated: March 6, 2014]

• Problem with installation of updates for Windows Vista.

  I have vista basic and my windows update tells me that she does not turn and I have to restart my computer.  The problem is not resolved.  In case there is no solution, I want to know if there is a way to download the updates manually because the automatic update does not work?

  Conjecture: http://support.microsoft.com/kb/968002/en-us

  Method 1: Run the Windows Update Troubleshooter

  Method 2: Run the Fix - it to restart the necessary services and records additional dll files

  Method 3: Restart Windows Services

• SOS - updates of Windows problem - won't let me change my settings to activate the automatic updates

  It is a nagging problem.  I tried to help and change a variety of things in my preferences - changed my profile/access etc.  I need a little help from someone.

  Note: my laptop is a new HP (2 months), I have recently updated to IE 8, I'm using Vista and it is a 32-bit system.  This cell phone belongs to me and is for use personally and in a home base business (so I'm a college professor).

  P.S. The HP Chat Support has not understood this.

  Can someone help me?

  Note: I am trying to solve this problem tonight, but I am not far away for awhile.

  It is probably easier than I think - but I have not had this problem before.

  Justin,

  Clean reboot didn't help.

  Question:
  I downloaded, a couple of weeks, a registry clean program AdAware and ran it... It was probably the time that feature automatic updates Windows Update stopped working.

  This is the problem and how to correct things now?  Should I reinstall my Windows Vista operating system or something?

  Please notify.

  Thank you
  Rich

• Updates of Windows problems

  Whenever I have installed the latest updates I can't connect to the internet later and do a system restore. What can I do as I have a lot of updates not installed?

  I have not tried Windows updates yet as I don't know if I have to run Fixit first.

  Thank you. I ran the Fixit and no threats were detected. I will then try to download Windows updates. PS: The search engine on my computer has now stopped working.

  Thanks, I think I'll wait for him to come back just to be sure.

  The Fixit who resets the Windows Update components is MicrosoftFixit50202.msi , which is available at the link that PABear and I are both displayed,http://support.microsoft.com/kb/971058
  There is no need to run using the click right as it is a .msi, a Windows Installer file.

  I am more than slightly confused, briana. You had previously declared

  Thank you. I ran the Fixit and no threats were detected. I will then try to download Windows updates. PS: The search engine on my computer has now stopped working.

  MicrosoftFixit50202.msi resets Windows Update components, it does not detect the 'threats', so please could you give uswhat Fixit you ran or did you really don't run the Windows malicious software removal tool detected no threat?
  MowGreen Services update - consumer safety

• error code 20378901 installation driver update in windows update

  I get an installation failure for windows vista update for nVidia - network - NVIDIA nForce Networkin Controller - the error code is 20378901.

  relocation link is not valid.  Help!

  Hello

  How do you try to update the drivers?

  Are you using the correct link for the download of Networkin Nvidia nForce controller?

  I suggest that you select the correct network controller model number, download and install the drivers from the following link:
  http://www.nvidia.com/download/index.aspx?lang=en-us