installed a new modem router now I can't access my emails with my usual password.

Similar Questions

• My ex is connected to my iCloud email secretly and do not think I know so now I can't link my email with my iPhone journal inside iCloud to check my mail or anything, how can I solve this

  My ex is connected to my iCloud email secretly and do not think I know so now I can't link my email with my iPhone journal inside iCloud to check my mail or anything how do I fix this someone please help lol

  Caitlyn,

  In the interest of privacy, I would recommend that you create a new password for your iCloud account.

  https://appleid.Apple.com/

  

• Cannot connect remotely via VPN since installing the new modem/router

  Can anyone help please. Since the acquisition of a new router / modem I can no longer connect via VPN to my work PC remotely. It comes in I receive the error message. Can someone tell me if I need to change the settings for the new modem / router to access?

  

  Hello Joanna,

  Here are the steps you need to do first:

  1. Off static IP for my server and let the router assign IP address and changed the IP address of the port forward.
  2. Check the IP address because obviously, that changed when you plugged into the router again.
  3. Updated to the latest firmware for the router and NIC.

  For more detailed troubleshooting you can refer to this link: troubleshooting common VPN related errors.

  Let us know how it goes.

• I changed my Zonealarm firewall Windows Firewall and now I can't access certain websites that I usually visit

  I changed my Zonealarm firewall Windows Firewall and now I can't access certain sites that are kept in my favorites, I used to visit including some Microsoft, MSN and a few others which it (using another PC for that) the sites that I'm trying to access right will keep showing that the connection but I can go to my favorites and connect to others of the opened page. Someone at - it ideas, what could have changed? I'm also using Microsoft Essentials.

  Sorted! ... the problem is my Belkin PCI card was a snap after use some 8 years and I am connected through my wireless alternative D - Link DWL-122 USB adapter and it has been/is somehow stop Adobe Flash to run, so any site, I have tried to connect to Flash content does not open. I tried the Belkin and it let me straight on any site I wanted.

  Hope this helps others as it isn't always down for a team of software.

• HP Deskjet 2542: Cannot print wireless Deskjet 2542 after installing the new modem/router

  We have recently installed a new Netgear modem/router and have not been able to print wireless since installation. I tried everything I could find on the forum and still no luck. Any help will be appreciated.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try each of the channels one at a time.  Make sure they are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• installed a new netgear router, now my lexmark printer will not print

  How can I add existing printer to a new router.

  Hello

  WHA, t and how the printer is connected (give model numbers and some details about the network)?

  If it is a printer ready network, you will probably need to reconfigure. It might be that the modified IP subnet by installing a new router.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• My old MSN e-mail account was hacked and blocked. I created a new Windows Live Hotmail account. How can I access the emails and blocked my old account contact information?

  My old MSN e-mail account was hacked and blocked. I created a new hotmail account. How can I access the emails and blocked my old account contact information?  Thanks for any help!

  original title: hacked E-mail

  Hi BigByrd,

  I'm afraid it's almost impossible to access the old MSN your Hotmail account is newly created account.
  See you soon ~

• I can't access my email works through outlook over a VPN. The signin VPN works ok, I can see my network co., but can not use outlook. 'Microsoft Exchange Server' reported an error (0 x 80040115)

  prospects for bt infinity

  I recently changed my home to infinity of BT broadband.  Now I can't access my email works through outlook over a VPN.  The signin VPN works ok, I can see my network co., but can not use outlook.   I get the following error at startup of outlook.

  Task 'Microsoft Exchange Server' reported an error (0 x 80040115): ' the connection to the Microsoft Exchange Server is unavailable.  Outlook must be online or connected to complete this action. »

  Anyone have any ideas?

  Allan M

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Kind regards

  Ramata Thakur

• I installed a new OS and now I have no wireless on the list of the network. I can't connect to my pro overdrive unless it is attached. Is there a download I need?

  I installed a new OS and now I have no wireless on the list of the network. I can't connect to my pro overdrive unless it is attached. Is there a download I need?

  Download wireless network drivers

  Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions.

  If you cannot access to the use of the internet, another computer and save the driver on a CD/DVD/card reader.

• Installed a new wireless router and now the wireless printer does not work

  We installed a new wireless router and now our Dell V305 will communicate or print with our laptops.  Any help apprecaited!

  You re-configured the printer to work with the new router wireless? Boulder computer Maven
  Most Microsoft Valuable Professional

• Disable new found material pop up - appears after installing a new modem from Verizon

  AFTER YOU HAVE INSTALLED A NEW MODEM FROM VERIZON WITH THEIR HELP, I HAVE NOW FOUND NEW HARDWARE POP UP WHENEVER I START MY COMPUTER.  I WENT INTO MY CONTROL PANEL AND UNDER DEVICE MANAGE DISABLED IT, BUT GO BACK TO A DEFAULT VALUE BECAUSE IT IS ONLY A TEMPORARY DIFFICULTY.  HOW CAN I GET RID OF THIS POP UP?

  I HAVE NOW THE NEW HARDWARE FOUND POP UP WHENEVER I START MY COMPUTER.

  Looks like his driver has been installed by the user instead of for all users, for example by an administrator?   (I don't remember if it is still a feature of the XP.)

  BTW, this is not the best forum to ask for help with hardware and boot, especially for an old OS problems.

  HTH

  Robert Aldwinckle
  ---

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• I did a clean install of firefox 31 and now I can't get on any web site of Ustream, it works on IE and Chrome

  I did a clean install of firefox 31 and now I can't get on any web site of Ustream, it works on IE and Chrome.
  I tried all the advice I could find on the help section, but nothing works. I reinstalled everything is new so it's all of this to date, but not a single site Ustream.tv will load. I can put them on IE and chrome.

  The question may be because of your corrupt cookie (cookies.sqlite) file

  Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete the other files of cookie present as cookies.sqlite - journal in the Firefox profile folder where the cookies.sqlite file has been corrupted.

  • http://KB.mozillazine.org/cookies
  • https://support.Mozilla.org/KB/deleting+cookies

  You can also check whether DOM Storage is enabled.

  • http://KB.mozillazine.org/DOM.storage.enabled

  ______________________________________________________________________________

  Create a new profile as a test to see if your profile is the source of the problems.
  
  See creating a profile:

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem
  
  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I installed a copy of XP - now I can't connect to the internet.

  We have just received a new laptop, so we moved things around.

  We had a desktop computer that was under Windows 2000.  We also have a lptop that is provided with Windows XP.  I just installed XP on the desktop - now I can't connect to any site on the internet. The 3 are connected using Network Magic to manage the network

  The resolution of the screen on the desktop is also off now.  I don't get the 4 colors of the Windows symbol & the background is distorted.

  I can solve this mess?

  Hi GinaQQ,

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article mentioned below.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  Method 2: Also, try to reset the TCP/IP Protocol and check the results.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

   

  You can also view the article mentioned below for more information about the screen resolution:

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

   

  Let us know if that helps.

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.