Disable new found material pop up - appears after installing a new modem from Verizon

Similar Questions

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• Cannon MG3150 won't print after installing the new modem from TalkTalk.

  Original title: Canon m.g.3150

  After new modem from talktalk, my printer does not work

  Hello

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I GOT A NEW ROUTER FROM VERIZON ACTIONTEC GT784 INSTALLED BUT NOW CAN'T USE MY MX340 WIRELESS PRINTER HELP

  I GOT A NEW ROUTER FROM VERIZON ACTIONTEC GT784 INSTALLED BUT NOW MY PRINTER DOES NOT PRINT. MX340 WIRELESS PRINTER. CLOSE

  Hello

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  1. what version of Windows operating system is installed on the computer?

  2 successful wireless connection configuration?

  3. do you receive an error message or error code when trying to print?

  In the meantime, I suggest to add the device on the network and check if that does the trick. To do this, follow these items:

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

   

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

   

  Sharing of files and printers

  http://Windows.Microsoft.com/en-us/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Reply with more information about the issue so that we can help you better.

• My computer is completely messed up after installing the latest updates from Microsoft. I need help/ideas to make it work again.

  Vista Business Service Pack 2
  32 bit
  2007-12-office
  Acrobat 9 Pro
  Adobe Design Standard CS4
  Sony Vaio

  I installed the latest vista updates today.  Three "important"; an option.  The optional parameter was an update of bluetooth toshiba.  We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary.
  Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail.  During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.

  I turned off the computer and when I rebooted, it did not start.  I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly.  I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista.  Outlook does not start.  He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared.  I have tried other products of office except Explorer who started without problem.

  I can't use restore because it says that the disc is damaged and needs to be checked.

  Any ideas are appreciated.

  Uninstall the update for bluetooth.  Never use Microsoft device driver updates.  To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.  Who can release the OS to do a system restore or other recovery options.

  Do you know when this problem started (probably with updates)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems.  Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• How recover Vista after installing Linux Enterprise Desktop from Novell?

  Hello world!

  Please can someone help with this problem. How can I recover my windows which I lost due to the installation of Linux on my windows. I tried too much time go by restarting and pressing f8, but this recovery option does not lead me to go and get my windows to the State facoty. As far as I know, I think that the hard drive has been reformatted after installation and deleted as a result options of backup or restoration, and if this is the case how can I restore my Windows file system and recover my windows in the back.

  Thank you for your e-mail to be on [email protected]

  Concerning

  Year s

  Hello!

  I think for the moment that you are not able to restore your previous version of Windows or you created the before recovery disk?

  I put t know what phone you have but all Toshiba notebook, they will be delivered with Vista without a recovery disk, but you can create one yourself. After you start the laptop the first time, you get the following message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  But now it s late to create the recovery disk and use the disk recovery HARD works, you must run the factory settings. This means that you can install your own version of Windows and then you start the drive HARD Toshiba Recovery function.

  Sorry mate, but the only way I see at the moment is to order a new drive Toshiba Recovery directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you have the recovery disk, you can restore your Windows version or let's say the factory settings.

  Good bye

• Global problems with IE crashing after installing the latest updates from Ms.

  After the installation of the last series MS Updates, we are seeing users get first notification DEP for Windows Explorer (using IE7), then an other error message stating that Windows must close THE Explorer. What happens when users try to access our portal Citrix Presentation Server SSL/VPN.

  Hi Chad t,

  Data Execution Prevention (DEP) is a set of hardware and software technologies that perform additional checks on memory to help prevent malicious code from running on a system.

  The main advantage of the DEP must help prevent the execution of code from data pages. In general, code is not executed by the default heap and the stack. Hardware DEP detects code that is running from these locations and throws an exception when execution occurs. Software DEP can help prevent malicious code to take advantage of exception-handling mechanisms in Windows.

  Microsoft does not recommend to Turn off the Data Execution Prevention (DEP).

  For more information on DEP, you can access the link below for the blog that talks about the DEP and the DEP/NX problems.
  http://msdnrss.thecoderblogs.com/2009/10/10/understanding-depnx/

  As you mentioned it started after the updates, I also suggest you to uninstall Internet Explorer and put it back manually and see if the problem persists. Access the links below for the steps to uninstall and reinstall Internet Explorer 7 respectively.

  http://support.Microsoft.com/kb/927177

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9AE91EBE-3385-447C-8A30-081805B2F90B&displaylang=en

  For further assistance, you can also consult to Citrix Support to see if they have a fix or a workaround is available.
  http://www.Citrix.com/lang/English/support.asp

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Missing utilities after installing SSD and restoring from Time Machine

  Today, I installed an SSD on my mid-2012 13 "MBP (Mavericks running) and then ran the restoration of service Time Machine to bring back everything that I used. All right, except that now I have discovered that Time Machine never backup my Utilties like disk utility, same Terminal is missing.

  I have a bootable USB with the Mavericks installation app on it, but now if I run, it's going to destroy everything Time Machine has done to restore (my CC Adobe apps and plugins, for example)? I would upgrade to El Capitan, but I use an old Wacom which does not have the drivers for the last OS X, so I'm stuck for now (do not want to buy a new Wacom immediately).

  Any ideas on how I can get these dos utilities without using the re - install or upgrade process? I watched the old backups TM and they aren't there either.

  You will have to reinstall the operating system to get the dos utilities.

  Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error. Then re-install the operating system.

  OS X recovery

  OS X recovery (2)

• I have a new modem and you want to configure my Apple Airport as a backup drive; How do I do that?

  I have a new modem from Verizon and want to configure my Apple Airport as a backup drive; How do I do that?  I need to extend the network, simply find a use for the airport.

  What is the brand and model of your new modem from Verizon? What is the exact model of your airport?

• Lack of driver after Instal Win 8

  My HP Pavilion dv6-6c60se

  There is a ((Unkown missing device)) appear after installing the victory

  Hardware LDS:

  ACPI\VEN_HPQ & DEV_0004
  ACPI\HPQ0004
  * HPQ0004

  IAM using Win8 Pro 64-Bit, what is this missing driver?

  Hello:

  Here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109953-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0005

• Satellite A30 - impossible to get a sound after installing XP

  Am not able to get sound after installing XP. Drivers from the Toshiba web site do not help. Does anyone have an idea on this issue. Thank you

  Hello

  It's old model of laptop, and all pilots must work. I'm sure you make a mistake. On this old notebook, you must install Windows XP Home SP1 edition and after doing this install all patches software, driver chipset, driver and driver sound to the less rated. The sound should work fine.

  If you have laptop model please download the drivers from the EMEA support page http://eu.computers.toshiba-europe.com

  Good bye

• Cannot print after replacing the 2wire modem

  Original title: I use my laptop exclusively. Recently, the 2wire modem was replaced, and everything continued to work perfectly, except for the fact that I can't print. What should I do to correct this?

  No changes have been made to my laptop after installing the 2wire modem.

  Hello

  (1) what exactly happens when you try to print?

  (2) you get any error message?

  (3) what is the serial number and model of the printer?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Solve printer problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems

  Method 2: Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• Photoshop CS does not work after installing Mac OS 7

  After installing Mac OS 7 (from OS6) Photoshop CS and CS2 will not start. I get the message that PowerPC, applications are more supported. The machine is a machine (not PowerPC) Intel and Photoshop has worked well with 10.6.8. Any help would be appreciated. Thank you.

  Hi Nick,

  Photoshop CS2 works on Mac OS X v.10.2.8 through v.10.3.8 (10.3.4 through 10.3.8 recommended) and Photoshop CS

  on Mac OS X v.10.2.4, 10.2.5, 10.2.6 or 10.2.7. See the document below.

  Configuration of Photoshop

  In addition, the CS2 products activation server is therefore more available.

  Please refer to the following article on how to download, install and activate the CS2 products.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Kind regards

  Gerard

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?