I installed a copy of XP - now I can't connect to the internet.

Similar Questions

• I deleted a virus from my computer this morning with Security Essentials, now I can't connect to the internet.

  I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.

  original title: can't get online

  Hello BurnBurn,

  I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install:
  http://support.Microsoft.com/kb/283658

• System repaired after crash, now I can't connect to the internet.

  I had to fix some errors in the recovery console by using a step by step guide and it worked, but now if I click on explore I get a bunch of weird on my printer messages even though my printer is not connected. Eventually the Explorer opens, but it says that it cannot connect even though the icon in my status bar shows that I am connected to my wireless network. When I open firefox, I just get an empty alert message and firefox never actually opens. Could someone help me with this please? Thank you very much

  Jason

  Hello

  ·        What are the messages that you encounter when you try to connect to the internet?

  ·        You have problems with internet Explorer or internet connection?

  ·        What browser do you use and what version?

  I suggest following the steps mentioned in the article below and check if the problem persists.

  Internet Explorer does not start or stops responding

  http://support.Microsoft.com/kb/926449

  It might be that internet explorer is corrupted, I suggest you to re - install internet explore if you use internet explore 7 or 8 and check if the problem is resolved.

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I had to restore my computer to factory settings and now I can't get on the internet

  I had to restore my computer to factory settings and now I can't go on the internet. I have Windows 7

  Hello

  When you perform a restore, you may need to reinstall the network drivers, etc..

  As you can not access the internet on the recovery computer, use the computer that you are on to get here to do this.

  Go to the website to make your computer > Driver and Software Support Section > find your computer model number > then your operating system > locate drivers Windows 7 > download and install the desktop > copy to flash drive > transfer onto the repaired computer.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  You can download all the drivers this way, or once you have network and/or pilots Wi - Fi installed get the rest downloaded directly to the repaired machine.

  See you soon.

• I have updated and now I can't get on the internet

  I finished the new update and now I can't get on the internet? How can I fix it?

  What happens when you try?

• I recently changed internet service providers and now my Wired desktop can't connect to the internet.

  I recently changed internet service providers and now my Wired desktop can't connect to the internet.  I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices.  I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced.  I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine.  This is just my office.  Any ideas how can I fix?

  Hello

  Follow the steps in the KB article below and see if that fixes the problem.

  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095

• I got my PC back to the original (as it comes in the box) and now I can't go on the internet.

  I got my PC back to the original (as it comes in the box) and now I can't go on the internet.  What should I do to achieve this?

  Contact your internet service provider,

  You can either reset your dsl modem / cable modem / software disc.

  If your wireless network, you have to reenter the wireless network / password. (if applicable with other computers to use it)

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• ITunes 12.3.2.35 says it can not connect to the internet, no connection, but my internet works fine.  I installed Windows 7.  Any help?

  I am using windows 7 on my pc.  I just installed the new Itunes, 12.3.2.35, and it does not connect to the internet.  I ran diagnostics and it said that the only test that failed was "secure link to iTunes Store failed.  What could be the problem?

  Thanks for any help.

  Yes, I had the same issue and have also windows 7. Here's what I did to remedy.

  1. go to your Start menu and in the search the bottom type in cmd menu.

  2. right click on cmd at the top of the menu, and then click "Run as Administrator". A black box should appear.

  3. type netsh winsock reset. It should invite you to restart your computer.

  4 restart your computer and then open itunes again.

  I did and now my itunes is on the rise and running and connection to the store. I hope this helps!

• I tried to update my windows 7 to 10 windows, it didn't do it and now I can't connect to wireless internet more

  July 15, I tried to update windows 7 windows 10 and when I had a wireless connection.  I tried to connect to my internet since then and it does not recognize wireless, only options are dial broadband, ethernet, to the top.

  Hi Suzy,.

  I realize there are the inconvenience caused to you. Now that you have me with you I would take care of that.

  Provide us additional information to help you better with this issue:

  1. What is the brand and model of your computer?
  2. Did you see any error code / error message trying to connect to the internet?
  3. What is the current version of the Windows operating system that is installed on your computer?

  This issue would have occurred due to problems of driver network card and network services.

  Let us try a few of the below troubleshooting steps and check if it helps.

  Step 1: Troubleshooting of network Run card

  Troubleshooting of network card find and fix problems with the wireless network card and others.

  1. Click Start; on the start menu, search type Troubleshooting and press enter.
  2. In the left pane, clickview all.
  3. Click network adapter troubleshooting.
  4. Select Advanced , and then click run as administrator.
  5. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  Step 2: If you are able to find the drivers in Device Manager, check the status of the device.

  Follow:

  1. Press Windows + X from the keyboard, click on Device Manager.
  2. Expand the network adapter, click with the right button on the driver.
  3. Click Properties and check the status of the device.

  Step 3: I suggest you update the driver of network adapter in Device Manager.

  Follow the steps below:

  1. Press the Windows key + x on your keyboard.
  2. Select Device Manager.
  3. Expand network adapters. Right-click on the device, and then click Update driver software.
  4. Restart the computer and check if the problem persists.

  See the article by Andre Da Costa on: how: install and update drivers in Windows 10 and check if it helps.

  It will be useful. Get back to us with an up-to-date report of the access to the Wi - Fi network for assistance.

  Thank you.

• Cannot install Charter Security Suite - says I need to be connected to the internet

  Original title: attempt to re - install Charter Security Suite. Moved (last step) saying not connected to the internet.  Internet Explorer for accessing site more security and is running.  Solution?

  Charter Security Suite uses f-secure.  When I get to taking it up lst installI tells me must be connected to the internet.  Internet Explorer is running.  Is this a compatibility issue? or what?

  Hello

  1. The question is limited to the installation of Charter Security Suite?

  Click on the link provided below for the installation of Charter Security Suite® for Windows.

  http://www.myaccount.Charter.com/customers/supportgeneral.aspx?PAGETYPE=9

  You can also get in touch with the support of the Charter for assistance.

  http://community.Charter.com/

• My laptop has been off wireless, although I have now managed to turn the wireless back on I can't connect to the internet, how to fix this?

  The wireless signal is now coming up on my laptop, but it will not just connect.  What should I do?

  Hi Jo-anneLow,

  1. What is the brand and model of the network adapter?

  2. you receive any code or an error message when you try to connect to the internet?

  You can follow this link completely and check if the problem persists:

  In the Windows wireless network connection problems

  Hope the helps of information.

• I removed a fake spyware and now I can't get on the internet

  Before you remove the spyware thing, I could get on the internet without any problem.  To remove it, I started in safe mode and ran SuperAntiSpyware.  That I ran it after a start normal and everything was fine except that I can't go on the internet. .

  I can boot into safe mode or normal boot.  In a normal start, I also have the box that says: ' MCRD Device Service has encountered a problem and needs to close.  In both cases, when I look at the connections, the State said acquiring a network address.  It doesn't matter if I try to connect wireless or wired. Same results.  It seems that it is connected but cannot move to the next step.  Clearly, browsers can not see the internet.

  I ran LSPfix and he said all right.  I also tried to fix with windsock with REPAIR to SuperAntiSpyware

  What should I do now?

  The answers I got from this site has been wonderful.  Finally the last part of the fix was this.  Avast says afd.sys has been infected, so I said delete it.  I looked and he was always there.  So I went to Windows\system32\drivers\afd.sys and renamed.  Problem solved.  All in all, I removed about 10 viruses but the rootkit fought back and wouldn't remove it Avast.  Once I did that, Avast! and Microsoft msert.exe said that I own.  All the anti spyware said that I own.  I can see with a wire and wireless internet.  You are great

• I used on my Toshiba Recovery CD, Windows Vista and now none of the drivers is installed. I can't connect to the internet. Help!

  Some drivers to try to install automatically, but after each reboot, they try to re - install again. I am not absent/not search for drivers, because I can't reinstall my network card.

  Hello

  Go to the Toshiba site on the computer that you use to get here > drivers and downloads Section > key in your Toshiba model number, then the operating system > find, download and SAVE the adapter, Chipset drivers, etc on the desktop > copy to a Flash drive and transfer them to the other laptop.

  http://support.Toshiba.com/drivers

  See you soon.

• Installed a Registry Cleaner software, now I can't connect to Windows

  After that I ran the optimizer, I rebooted, now when I try to Tog on my account from the Welcome screen, it load and disconnects immediately. Any suggestions would be greatly appreciated.

  You should be able to boot in safe mode.  then in safe mode, run the system restore feature and find a restore point to return your system to a functioning State.

   

  either way, if this program was all good, then he may have done a restore point just before you used to make changes to your system.

   

  If this isn't the case, then I would uninstall it to remove the temptation to use it again.

   

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

  .

  "Dan - Salem" wrote in message news: f99259a7-4b4b-4476-b988-a0697cec30be...

  After that I ran the optimizer, I rebooted, now when I try to Tog on my account from the Welcome screen, it load and disconnects immediately. Any suggestions would be greatly appreciated.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann