Installed a Win7 on a new disk of 1 TB recognizes only the 500 GB.

Similar Questions

• Hello! I bought Photoshop CS4 a few years ago and more later upgraded to CS6. My Mac broke down and I am trying to install CS'A on my new mac, but I can't find the download in my adobe account

  Hello! I bought Photoshop CS4 a few years ago and more later upgraded to CS6. My Mac broke down and I am trying to install CS'A on my new mac, but I can't find the download in my adobe account

  Here is the link to download Creative Suite 6 applications

• Time Machine the new disk transfer has not moved all the time

  I have a Time Machine backup to an external drive. It works very well. However, he was beginning to run out of space, so I bought a new, bigger HD.

  I followed all the steps of Time Machine: how to transfer backups from a current backup disk to a new backup drive - Apple Support.

  I then waited 12 hours for that copy.

  Around midnight, I noticed the copy is complete. There was a message that iWork had not been copied because he needed a different operating system. But I rejected. There are no other messages.

  I changed the Time Machine preferences on the new disk. And fell asleep.

  This morning, I walked into a Time Machine.

  Only the first date from July 2014, was on the new disc of TM. Then there was five times after midnight when the new drive was saved.

  But there is nothing in any of the years between the first date and after midnight.

  I know that there are hundreds of TM captures on the original disc. And I've used them very well.

  I tried to copy individual files from the old drive to TM to the new, but it is not possible to "change the backups."

  10.10.5 system

  What should do?

  While in Time Machine, to see all the volumes mounted shift - command - c.    Information derived from Linc Davis.

  If this does not work, try to copy the file to disk/restore utility using to copy the backup to a new location. Please note that this will reformat the destination partition.

• How to install XP OS on a new disk of own DART?

  Hello

  Let's say that I managed a new formatting the internal hard drive installed in my PC.

  I would like to install Win XP from a CD of Installation.

  Just to confirm if my method is good:

  1. first of all insert Win XP Cd on the DVD player

  2. on the PC, wait for the Dell Logo out then press F12

  3. Select starts from following and the DVD instruction scren.

  Thank you

  Low

  You are right on all three counts indictment with the exception of having to format the hard drive before installing the operating system. Depending on what software you used to format your hard drive, you may encounter some problems with the installation. Best practice in my opinion, is you insert the XP installation cd into the optical drive recommended, restart your computer and follow the prompts.

  How to perform a new installation of windows XP.

  http://support.Microsoft.com/kb/978307

  Hope it will be useful.

• I have more than one firewall installed product. How I can for deleete all and keep only the MSN Firewall?

  I got like Norman antivirus programs and now I move to Msn essintials. but the computer turned out to be very slow. I scanned the computer with the MacAfee Scan more and I got a message that I have more than one firewall installed, product that could create problems on my Pc I have bleive that I only have widows Firewall now. but the analysis said the contrarey.

  (1) using a router?  They usually have a firewall.

  2) go to control panel and click on security.  Click the down arrow next to firewall and windows will tell you what is running

  (3) you could also look in Control Panel > programs and features for the firewall software like McAfee, ZoneAlarm, or any that you have previously installed.  You can uninstall then from there.  Use the Norton uninstaller to remove the software and/or the traces that were left during uninstall.

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  If the computer is slow, check programs and features for applications that are installed but you never or rarely use.  Uninstalling those who help you in speed.  And if you go in program files, search for files left behind from applications already installed.  If more than six months, it is safe to remove them.  Remove temporary files, run disk cleaner, empty the trash, defrag your unit.

• Install Windows 7 on a new partition

  I have a Satellite P300-19F and it came with Win Vista. I am trying to install Win 7 on a new disk volume, but I do not have the Toshiba provided with equipment programs (software for webcam, DVD, etc.).
  Where can I download all software from Toshiba? I can only find drivers to download.

  Thank you

  What you need are drivers Win7 Toshiba specific tools and utilities, and each of them you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  I installed Win7 on P300 s brother and it works perfectly.

  If you need assistance please let us know.

• Install Windows 7 on a new 3 TB hard drive

  I'm trying to install Windows 7 on a new 3 TB hard drive.  During the installation, I get a screen that says no hard drives have been found.  Windows installs the boot files on the X startup disk but nothing else.  The motherboard is an Intel DZ68BC and the Bios is set to boot from the UEFI.  All of the suggestions.

  Hello Keith,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur if the storage controller and chipset drivers are not updated or due to incorrect BIOS settings.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Windows 7 installation problem: hard drive not found
  http://Windows.Microsoft.com/is-is/Windows7/Windows-7-installation-problem-hard-drive-not-found

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office.

  Model F730 laptop and notebook product S/n CNF7415WH7

  I bought a laptop (compaq F30 us in the United States) and windows original vista came with the compaq laptop (bought in US). Now, I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office. I don't have the cd or the software with me key since they have not provided for me at the time of purchase

  Hello

  No there is no way, how the do, because the license of Windows Vista is part of the computer compaq laptop - this is the license OEM - and cannot be separated.

  (in case the laptop is broken and cannot be repaired, then the license expiresand cannot be used on another computer)

  LC

• Re-install Acrobat 11 on a new PC without the original installation media

  I need to install Acrobat 11 on my new PC. We do not have the original installation media, but have a serial number.

  Any ideas?

  Hi Norman,

  You can download Acrobat 11 here: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  Kind regards

  Rahul

• Install Photoshop CC on a new PC

  How to install Photoshop CC on a new PC?

  Same as on the old PC - install creative cloud and let him handle things. If you do have not doen, disconnect on the old machine to save your activation.

  Mylenium

• Reference Dell T620 recognizes only 4 of 8 hard drives installed

  I bought 7 additional 2 TB drives for my Dell PowerEdge T620, delivered with just 1 such disk is almost a year now.  My model has 8 bays of HARD drive in front and after the installation of 7 new disks that I note that only four drives in the top row of the berries are recognized by THE system BIOS.  I'm running Ubuntu Server 12.04.4 and deliverance 'fdisk-l' lists only four disks, as well (sda, b, c, d).  I hope to set up the disks in a RAID 6 configuration if I can get the system to see eight - is it a simple BIOS setting change?  Please tell me that I don't need another controller or similar?  If it can help on the side of the Dell Support of things, my ST is deleted by the privacy policy.  Kind regards

  Mark D.

  In order details, Service number, listed only one RAID controller is the S110 RAID controller onboard.  The S110 is the lower-end controller you can get.  IF you are still using the controller, then the problem is your controller only supports a maximum of 4 disks, AND it does not support RAID 6 (only 0,1,5,10). You should use the H700 for a storage system like that anyway (or the H310 minimum).

  If you actually have a high-end controller, then you are very probably absent the second cable SAS controller to the bottom of basket.

• How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

  I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

  I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

  I want to know the steps to follow to do this. My plan is this:

  1. turn the pc power off and open the case.

  2. remove the old hard disks

  3. plug the new empty hard drive

  4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

  5. enter in the bios and put the DVD-ROM as first boot device

  6. install win 7 on new hard drive.

  Is this correct?

  Because my next question is important:

  7. Turning off the computer.

  8 reconnect the two old hard drives. New total number of SATA drives connected = three.

  Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

  How can I make this work?

  Thank you very much!

  Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

  Any help would be appreciated!

  Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

  See:

  How connect a SATA Hard Disk as a slave . eHow.com
  Single, master and slave drives and Jumpering

• HP Touchsmart 15R017dx: install windows 8.1 on new SSD from the recovery disk

  Hello

  I recently bought a 275 GB SDD to replace a Go 520 crushed SATA HDD. Because I don't have a recovery disk created, I ordered the HP Win 8.1 recovery disks. I followed the instructions and the Disk 1 formatting process completed successfully and I was prompted to insert disk 2. At this stage the process crashes after the dvd player starts rotating. Nothing I o will cause the process to continue.  The problem is the size of different readers?

  Thanks for any help.

  Hello:

  See if, by your own plain W8.1 installation media, you can reinstall Windows 8.1.

  https://www.Microsoft.com/en-us/software-download/Windows8

  The only downside is the OEM product key in the BIOS.

  However, there are workarounds like the one shown below to find out how to get the product key in the BIOS to work on your new installation...

  http://superuser.com/questions/697253/clean-install-Windows-8-1-or-Windows-8-from-OEM-key

• EliteBook 8770w new install of Win7, but the SSD mounted at the front and restore works not

  Hello

  I have a problem...

  I tried to clean my laptop and reinstall Windows 7 Prof

  I bought the laptop with standard HARD disk and a professional editing an SSD immediately. It migrated everything and changed this specific ssd and so on.

  Now, I want to renew the win7, but:

  1. the HP restore does not work. Don't know why?

  2. I want to install a win7 disc now, but where will I get the right drivers and so on?

  How can I do exactly?

  It will work like this:

  (a) install win7 disc

  (b) install hp support assistant

  (c) leave SA HP find all drivers?

  If not, how should I do this? I have all the original HP discs, so I don't know how to get all the necessary drivers for my laptop.

  Thank you very much and best regards,

  Marc

  Hello:

  You can find all the drivers for your model on the link below.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?lang=en&cc=us&sp4ts.Oid=5257513

  You can try the steps you sketched out, or you can manually install the drivers you need on the Web page above.

• RESOLVED: Loop of reboot after installing new disks in RAID of PERC S100

  A customer has a Dell T110 (with a PERC S100 RAID controller) running Windows 2008 R2. The system has two disks: a reader not RAID (C :) running the operating system and a RAID1 drive (E :) sharing data with network folders.) We need to install again, larger disks for the RAID.

  I thought I could backup the data on the RAID drive existing (e), install new disks, built a new table in the S100 (VDM) virtual disk boot manager, boot into the operating system, create the new partition for the data replaced E: drive and copy the data back. This was not the case. After installing the new disks and the new array of construction (which is reported as "READY (R/W)" when starting, Windows starts all the way in "press CTRL-ALT-DEL to log". After two or three seconds, the system reboots. The same thing happens when I try to start safe mode. The system IS NOT automatically booted to the Recovery Console. He never seems to know that an error occurred and the system was not shut down normally.

  I booted into the Recovery Console, installed the drivers for the PERC S100 and run recovery to start without success. Also in the Recovery Console, I ran 'chkdsk /f E:\. ' (remarkably, the drive letter for the data drive remained the same), and no error has been reported. I also reinstalled drivers S100 of the recovery using DISM Console, but that changed nothing.

  I started to 8.1 Windows PE, installed drivers S100, formatted the virtual disk, copied the data which he, and everything works fine. The only problem is when I try to boot from the system drive (which has no problem) with the new installed disks.

  When I put the old records, the system boots normally with no reconfiguration required. The VDM to start automatically remembers the discs and the table. Nothing shows up in the logs event indicating that there was an error during startup. (Ntbtlog.txt) start-up newspaper, after several boots with the new drives in place, indicates that the system restarts at various times during loading drivers. There is nothing coherent in the startup log to indicate what the problem is.

  The only clue I have is that, during the startup, the VDM reports the virtual drive of origin as 'NORMAL (R/W)' and the new virtual disk as "READY (R/W)", but I'm not sure of the significance of this difference or if it suggests a solution.

  I can't find clues in all the newspapers about what may be the problem. If anyone has any suggestions, I will be grateful. I'll be especially grateful for the wacky suggestions.

  I ran it. Nothing appeared unusual. However, I does not solve the problem.

  I connect the new readers to the same SATA ports as the old records. When I connect one of them to the SATA port that had not been used as part of the original painting, the VDM S100 reported the original failed array, because readers were is more connected and showed the new table as a LOAN. The operating system then started normally.

  The trick, it seems that you should remove the old virtual disk before connecting the new disks on the same ports.