Installed at the factory of HP PCI USB3.0 ports H8 - 1080t does not work

Similar Questions

• Re: Installed update the BIOS for my Pro Satellite L300D and now screen does not work

  Hello

  I installed the update of the BIOS 3 days ago, I had a few programs that are open at the time and also an external USB mouse in time. The hard drive crashed and then blacked out, but the power was still on the turbine runs at full skin. I tried to turn off the computer by the power button, but it wouldn't, so I let it run out of battery. Since then, the computer seems to turn on but the screen has been blackened since then, I can't see what the State of the hard drive is in.

  Any ideas?

  Hello!

  Oh dude, it looks like that your ROM module is damged due to a defective BIOS update :(

  A BIOS update should normally * do not get with the implementation of substantive programmes (also antivirus). I think that's the reason why the n t successfully update.

  However, you can do nothing. You will need help from a technician for laptop that can try to reflash the ROM module On the Toshiba page, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• Windows store tells me that Revel is installed on my PC for Windows 8.1. Even if it does not work on my iPad, there is no sign of it on the PC. I can't connect to the PC.

  Windows store tells me that Revel is installed on my PC for Windows 8.1. Even if it does not work on my iPad, there is no sign of it on the PC. I can't connect to the PC.

  I can not uninstall revel and reinstall it because I can not find it and because Windows store says it is already installed.

  Hoping someone can help.

  Hi JRSJS,

  Windows 8.1 makes it easy to find installed apps! Here is a link that can help you:

  Tip Windows 8.1: Find your installed applications. Windows 8 content SuperSite for Windows

  You can find this link also somewhat useful:

  http://www.fixedbyvonnie.com/2013/12/where-are-apps-in-the-Windows-store-installed/

  I hope this helps!

  Glenyse

• Music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work.

  Hi, I have Windows 7 and the Sound Blaster Recon 3D PCIe audio device. In the last few weeks, I noticed that some videos will play without problem and some have the following problem: the music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work well. Specifically, I hear a noise when they speak. But if I keep place the volume of the speaker (on the icon) and keep clicking the open icon, the sound begins to get stronger and you can actually hear it above his ' ding ding ' by clicking on the icon of the speaker volume. I've never had this happen before. I don't think I did something different from my usual activities lately and haven't downloaded all new program. Music plays without problem. Only the French-speaking parties. I tried the program compatibility troubleshoot and it told me "Incompatible application". Don't know what it means that I am aware of no incompatibility. Never happened before. Just suddenly appeared. Don't know if updates recent MS interfered with the audio device.  Also, I tried looking for questions that are already using the Control Panel, Manager of devices... and no problems were discovered. I put the volume on the strongest settings already and that doesn't work anymore.

  Thanks for your help to solve this problem.

  Just an update.  Problem solved. Faulty speaker connections. Did not touch the connections before the problem, so not sure what happened to these connections, but the problem is resolved. Thank you.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  Hi Yanni,

  Tethered shooting works fine with Lightroom 6.4 on El Capitan.

  You can then go ahead and buy Lightroom and perform the tethered shooting.

  Kind regards

  Tanuj

• Made the switch from the Firefox chrome; now, meeting places and a few videos does not work

  Salvation; I'm wanting to get away from chrome, but in firefox, I can't get the 'hangouts' working in gmail, even if I do not have the googletalkplugin installed on my pc. Another issue I see is that, on some pages, video does not work; in the latest version of chrome, I understand that the flash thing has changed and I guess that firefox has not changed in the same way. I hesitated when downloading a plugin, as shown on the screenshot for fear that it will mess up video in chrome, I would use chrome. I would rather not switch back from firefox to chrome to phone or watch the video. Help, please.

  I asked for help on the hangouts thing before, but your suggestion 'install plugin' was not enough, so I request further assistance on this now. on the video thing, please just tell if I should download the plugin and whether or not it will affect the reading in chrome. Thank you

  Working! I had the talk plugin set to always turn on but I had disabled the video because I only use the phone, but apparently, they both need to be addressed to always activate... Please mark this as resolved and thank you!

• All the drivers are updated for my scanner, but it still does not work?

  I tried to "update drivers" for my CanoScan LiDE 200 just in case, but he said that all drivers are already updated. But when I press "scan" on my scanner, it nothing happens; It does not work! I went to "scan profiles", through the "Scanners" Wizard and when I tried to add my scanner, he said:

  Error - Failed to initialize selected scanner.
  What should I do? I need my scanner!
  Thank you.
  :-) N °

  You need to install the win7 Canon software / drivers before you connect the scanner

  http://www.Canon.co.UK/support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_200.aspx?type=download&page=1

• The right Shift key View 4 PCoIP/w and keypad does not work

  Hi all

  I'm having a weird behavior with the right shift key and the numeric keypad. This happens when you use view 4 with PCoIP. When you use RDP to connect to a system and using the console in vSphere.

  To illustrate the differences in the way he behaves, I typed the following string in an RDP session and a Console Session of vSphere.

  "@ @ 123 123.

  ^ Button '2' three times, three times, to left SHIFT + key '2' "123" on the top of the keyboard and 123 on the numpad + is offset to the right.

  

  You see that, while in RDP, the right shift key does not work and so that the console session the num pad behaves like the arrows or the end, pg DN (aka acting like numlock is turned off)

  VMWare tools are installed on the virtual machines in question. I tried to turn numlock on and off without a change in behavior.

  No I don't think that the numeric keypad problem has been reported.  But I've now reported.  I'll let you know if we have other questions.

• I upgraded to latest version firefox 29,0 in windows machine 7. All the user interface looks very good. Undo close tab does not work for me. Is that not been addressed?

  Undo Close tab does not work in windows 7 for firefox latest version 29,0

  You can do this via CTRL + SHIFT + T as well.

  You can try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:

  • Windows/Mac: choose Help > restart with disabled modules
  • Linux: run firefox-safe-mode in the Terminal/Konsole

  If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.

• I get a message saying: Mail must fix its information on your mailbox store. The Quit and open again mail! None of this does not work I can receive and send mail through google please someone can help me

  "I get the message:" Mail needs repair information on your mailbox store. Exit and open the mail again. »

  None of this does not work. Please can you help me?

  Mail is version 8.2 (2104)

  iMac 27 inch mid 2011

  Processor: 2.7 GHz processor intel core i5 memory: 4 GB 1333 MHz DDR3 graphics: AMD Radeon HD 6770 M 512 MB

  Troubleshooting post - Yosemite

  Address postal (Yosemite): If you are unable to receive messages

  Address postal (Yosemite): If you are unable to send messages

  Post not send or receive messages after updating to OS X

• The button control for CD - DVD on Satellite M70-166 does not work

  I don't have a model Satellite M70-166. PSM71E and the CD-DVD button control does not work (up to a few days ago it worked...).

  can someone help me?

  Thank you!

  Try to roll back OS to an earlier time using System Restore utility. If this does not help please let us know.

• When using my computer, the screen suddenly made sense upside down. Even my mouse runs in the background. I tried to restart but it still does not work

  This could be some kind of virus?

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right click on the empty desk > graphics > Rotation.

  See you soon.

  Mick Murphy - Microsoft partner