Installed CS5.5, does not start only Dreamweaver CS5.5

Similar Questions

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.

• just installed sp3, xp does not start, gores in safe mode.

  I installed Windows XP pro sp3 today.  When I try to restart or start my acer aspire laptop Windows XP does not start and the computer goes to the safe mode screen

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• INSTALL A PROGRAM DOES NOT START AUTOMATICALLY, IN VISTA WHERE THE COMMAND IS RUN?

  PROGRAM DISK DOES NOT START AUTOMATICALLY, IN MS VISTA WHERE THE COMMAND IS RUN OR HOW DO I INSTALL THE PROGRAM?

  Click Start > programs > Accessories > RUN.

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-run-command-on-Windows-Vista-Start-menu/

  Link above will help you.

  http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administrator-privileges-in-Windows-Vista/

  And this will interest you as well.

  See you soon. Mick Murphy - Microsoft partner

• After auto update installed, Windows Vista does not start

  Individuals:
  Windows Vista Home Premium w/Service Pack 1 installed
  Dell Studio 1737, 64-bit

  Problem:
  Earlier this week (I think it's the 16th), my computer has installed an automatic Windows Update and restarted.  When she came back to the top, it says Windows could not start and asked if I would so he can try to restore the operating system to a previous point in time or if I try to restart Windows.  I tried to start Windows again (this time with my fingers crossed), but got the same message.  So I went for the #1 option and after half an hour, or so, I got a new error.  To be honest with you, I have seen so many mistakes in the last week, I don't remember exactly what he said, but I wanted to go to the advanced options, where I could choose a restore point manually.  I have put back to point restoration 6/15 and had no problem getting Windows to start.  Unfortunately... Windows REALLY asks me to install this update so at 03:00, after spending at least an hour and a half on the issue, he did an update automatic, rebooted and Windows wouldn't start again.  So, again, I am through the whole process (it's the only way I found to manually choose a restore point) and me to start Windows.  Then I disabled the automatic update in the hope that I could skip this update.  However... Windows has put the updates to install every time I put it in mode 'sleep'.  You can see where I'm going with this.  Now, any time my computer stops for some reason, Windows refuses to restart.  To make matters worse, the last time I had to go through this process, for some reason any he would not support up to 15 and I had to try again and it backwards until the 13th.  Please help me!

  You did little to restore the system.

  Hide this particular update, if you do not need!

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Mick Murphy - Microsoft partner

• Does not start under Dreamweaver

  I had a problem with my computer, had to go back to a previous restore point and now can't figure out how to start Dreamweaver.

  Basically I can't understand where lives actually dreamweaver.exe or dw.exe or anything what it is named.

  I launch CC and it tells me that dreamweaver is updated, but I can't understand how A) uninstall so I can reinstall (it is not in my list of programs my possibilities uninstal) B) find the exe file so I can do a shortcut.

  Did a search in my computer, but it does not find the file.

  Been to search multiple files (dreamweaver DOES not seem to be in my program files) but I can't find the darn file to launch. Does anyone have any IDEA where he lives?

  Windows 7 and Dw CC.

  Thank you!

  Sorry, but your trial period ends when you have removed the software - which basically did you for system restore to an older version.   I don't know of anyway to get it back again.

  Nancy O.

• Satellite L40 - 15G - does not start, only power LED lights

  Hello.

  I have a Satellite L40 - 15G that will not start. I click the power button, or with the battery, and only the power led alternately. I can open and close the cd/dvd, but nothing else works. No beeps when I remove the memory, the hard drive led blinks even. I tried with another hard drive, and it's the same thing.

  Could this be the motherboard, the processor?

  Appreciate the help!

  Hello

  Unfortunately, it looks like a hardware malfunction. I guess that it s related to the motherboard or perhaps CPU, if you have already tried another memory module.

  You should go to an authorized service provider. Guys have good diagnostic tools to check your laptop and repair. In addition, they can order spare parts Toshiba.

  Sorry, but everything that s what I can say. Here he only a user to s forum

• Mackbook Pro ME664LE/A does not start - only fan comes on

  MBP ME664LE/A - A1398 (EMC 2673). MacBook Pro Core i7 2.4 15 "beginning 2013.

  During an Office Update, the MBP began to operate the fan periodically. The MBP was not hot. After a while her display off (black) and the MBP has failed.

  Whenever I want to turn it on, only the fan turns on.  I followed all the procedures to get back to zero and also SMC reset, but nothing change.

  Any Suggestions? Could be a known problem?  Someone in the the Argentina Macusergroup said that apparently a known issue related to the card mother apple in 2013 models...

  The MBP has little use, only a few weekend for personal staff... I am concerned, I spent a lot of money in this MBP to get the best laptop at home, and it's a failure...

  Connect the MBP to a monitor.  If the monitor does not display an image, the main suspect is a faulty GPU.  If the monitor displays an image, the display or the connection to the screen is defective.

  Ciao.

• Toshiba 32LV933G does not start - only in standby mode

  I'm looking for a dump of memory (SPI Winbond 25Q64FVSIG U7).
  TV all the time on standby and will not start.

  Try to disconnect all the cables and remove it from the socket.
  Wait a while, and then connect it again in power.
  In case this is not enough, you need to contact a technician to check the hardware of televisions. I hope that the warranty is still valid

• A80 - 154 does not start - only black screen with strange resolution

  Hello!

  I have a big problem with the laptop. When I start it the power led and battery LED or power plug LED is blue (depending on what energy source is used, the problem appears both!). It's normal. But you don't see anything on the LCD screen. And nothing happens. Are lit, display is not black, no sound of the HARD drive or the fan. When I connected my external 17 '' TFT, he says that there is a signal, but the screen remained black.

  The signal has a resolution of 720 x 400 70 Hz, which is a very exotic resolution and a strange frequency! Anyone has any idea what it could be? I connected no matter what USB or other device. Only the laptop with or without the battery.

  Hello

  Well, it's not easy to say what may be the problem. I think it s a hardware malfunction, but I don t know which part might have a failure. Maybe it's something wrong with a CPU or memory modules s.
  In this case, I recommend to contact the service partner. He can do some tests.

  Good bye

• Tecra M10 - does not start only beeps

  My Tecra won't start. It sounds right. I checked the RAM and battery. I removed the keyboard, but without success.

  What is going on?

  Concerning

  Hello!

  Normally beep code at startup means that it s something wrong with the hardware (hardware malfunction).

  To identify what is the cause, you can search with Google. There are a few websites that shows what the beep code (depending on the BIOS you have).

  It could be the RAM, CPU, graphics card or something on the motherboard.

  But if your laptop is under warranty, you can contact an ASP. The repair should be free. ;)

  Good bye

• My Xp does not start, only in safe mode. Normal mode just keeps looping in the loading screen. Safe mode works fine, what to do?

  As the title says. What should do?

  I found out what is wrong. The hard drive could not be "read". Drive C and D was crushed. Had to change the hard drive. Changed, working (y). Thanks anyway :)

• Just installed CC - Apps does not start after the App Manager v7.0 update

  I get a few different error messages after installing creative cloud for the first time.

  I should mention that I accidentally uninstalled Adobe Application Manager, but then upgrade v7.0

  

  Hi DannLedwick,

  Please perform the following steps according to how you use.

  Mac OS X 10.7 and later versions

  1. Remove AdobeAAMDetect.plugin HD/Library/Internet Plugins /.
  2. Restart the browser.
  3. Go to https://creative.adobe.com/products/creative-cloud.
  4. Sign in using your Adobe ID and password and download the creative cloud Application.

  Widows, 7 and 8 (64-bit)

  1. Using Explorer, go to \Program Files (x 86) \Common Files\Adobe and OOBE and rename it OOBE_old.
  2. Restart the browser.
  3. Go to https://creative.adobe.com/products/creative-cloud.
  4. Sign in using your Adobe ID and password and download the creative cloud Application.

  Windows 7 and 8 (32-bit)

  1. Using Explorer, go to \Program Adobe and OOBE and rename it OOBE_old.
  2. Restart the browser.
  3. Go to https://creative.adobe.com/products/creative-cloud
  4. Sign in using your Adobe ID and password and download the desktop CC application.

  I hope this helps.

  Kind regards

  Sumit Singh

• Windows 7 Enterprise does not start successfully after re - install

  I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

  After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

  If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

  If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

  Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

  I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

  I also tried:

  • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
  • Do a CHKDSK - revealed nothing.
  • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

  Ideas anyone? I'm at my wits end.

  It's OK guys.  I have it sussed.

  He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

  Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

  What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

  Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

  Hope this sorry tale helps someone else.  It just cost me four days!